www.cooperhandtools.com/weller July 2007
New in 2007
Weller Volume Extraction
System
WFE2ES
Weller Info No. 2
New for 2007: Weller Volume Fume Extraction System WFE2ES
Our testing conclusively proves that soldering with lead-free alloys
creates a level of breathable air-born pollutants which exceeds the
safety threshold set by OSHA ( see diagram). This is a viable solution
for use in applications where volume extraction is the most suitable
option e.g. solder baths, hot air soldering, micro soldering and adhesive
applications.
Key features of the WFE 2ES:
The WFE 2ES guarantees a filtration efficiency of 99.5%. The
compact filter system housed inside consists of an F5-class fine
dust filter and a Puratex compact H12 Filter (with active carbon
section) ensuring an efficient and reliable extraction function.
The powerful brushless and maintenance free turbine
(1800 Pascal) extracts at a volume capacity of 220m³/h resulting
in fast and effective removal of pollutants from the air.
The increased levels of air-born pollutants produced at the work
place by lead free soldering are safely and easily removed by
the WFE 2ES.
Low noise emission: less than 55 dBA.
Our wide range of accessories provides users with a high degree of
operational flexibility. There is no need for
specialized on-site installation. And the investment
makes the WFE 2ES a highly efficient and cost-
effective fume extraction system for up to two work places.
The WFE 2ES improves the soldering process by capturing the particles
and pollutants produced and providing the operator with a comfortable,
clean and safe working environment.
Available August 2007.
Page 1 of 7
WELLER NEWS No.1 / Seite 2 von 2
Weller Info No. 2 July 2007
Technical Data WFE 2ES
Voltage 115 / 120 VAC - 50 / 60 Hz
Dimensions in mm 320 x 320 x 395 mm (L x W x H)
12.6 x 12.6 x 15.6 in.
Electrical Power 115 VA
Noise level 52 db (A) at 1 m distance
Max. pressure 1800 Pa (0.26 psi)
Max. airflow 220 m3/h
Max. capacity 2 work places
Filter Fine dust filter F5 (no. 0058735884)
HEPA filter H12 (no. 0058762701)
(99.5% extraction of particles > 0.66 µm)
plus carbon filter
(active carbonate foam)
WFE 2ES KIT 115V (Order No. WFE2ESKIT) consists of:
WFE2ES WFE 2ES 115V fume extraction unit
005 36 372 99 WFAF 50 extraction arm, 1 m length
005 87 353 27 Extraction hose, 50 mm dia., 3 m length
005 36 379 99 WFTB 50 bench mounting bracket
with damper for extraction arm
005 36 371 99 WFFMP 50 adapter
005 87 358 79 hose clamp 50 – 70 mm (2 pcs.)
Page 2 of 7
Weller Info No. 2
July 2007
WFE2ES (Order No. WFE2ES) consists of:
Photo: Cat. No. Order No. Description Function
WFE2ES WFE2ES
115 / 120 VAC
fume extraction
base unit,
includes 3 m (10
99.5% filtration
efficiency of
soldering, flux,
adhesive, and
solvent fumes
foot) extraction
hose
00536506810053650681
Accesso ry kit
containing
accessories
necessary for
one operator
Contains all of
the accessories
needed for the
setup of one
operator
Accessory Kit Contents (0053650681):
Photo: Cat. No. Order No. Description Function
0058735925 0058735925
50 mm (2 in.)
extraction hose,
3 meters (10
feet) in length
Connects to one
of the two
exhaust ports in
the WFE2ES
base unit.
WFFMP50 0053637199 System seal
For connecting
the 50 mm (2 in.)
extraction hose
(TBD) to the
WFAF50 flexible
extraction arm
(0053637299).
The damper
mounts directly
into a 58 mm
(2.25 in.) hole in
the bench top.
When the
WFAF50
extraction arm is
removed from
the system seal,
a spring-hinged
door seals off the
system.
WFTB50 0053637999
Bench mounting
bracket or
WFFMP50
system seal
Use this bracket
to mount the
WFFMP50
system seal to
the side of the
bench if your
benchtop does
not have hole.
Page 3 of 7
Weller Info No. 2
July 2007
Photo: Cat. No. Order No. Description Function
WFAF50 0053637299
Extraction Arm,
50 mm (2 in.),
100 mm (4 in.)
funnel, 100 cm
(39.4 in.) length,
ESD safe
Connects to the
WFE2ES fume
extraction base
unit through the
WFFMP50
system seal.
Position the
nozzle over your
soldering work
area for efficient
fume removal
0058735879 0058735879 50 – 70 mm ( 2 –
2.75 in.) hose
clamps, qty. 2
For securing the
50 mm (2 in.)
extraction hose
to the WFE2ES
base unit on one
end and the
WFFMP50
system seal on
the other end
Additional accessories available for the WFE2ES:
Extraction Arms
Photo: Cat. No. Order No. Description Function
WFAF50 0053637299
Extraction Arm,
50 mm (2 in.),
100 mm (4 in.)
funnel, 100 cm
(39.4 in.) length,
ESD safe
Connects to the
WFE2ES fume
extraction base
unit through the
WFFMP50
system seal.
Position the
nozzle over your
soldering work
area for efficient
fume removal.
WFAS50 0053637399
Extraction Arm,
50 mm (2 in.)
tube, 210 (8.3
in.) x 20 mm
(0.75 in.) flat
nozzle, 100 cm
(39.4 in.) length,
ESD safe
Connects to the
WFE2ES fume
extraction base
unit through the
WFFMP50
system seal.
Position the
nozzle over your
soldering work
area for efficient
fume removal
WFAN50 0053637499
Extraction Arm,
50 mm tube (2
in.), 50 mm (2
in.) round nozzle,
100 cm (4 in.)
length, ESD safe
Connects to the
WFE2ES fume
extraction base
unit through the
WFFMP50
system seal.
Position the
nozzle over your
soldering area.
Page 4 of 7
Weller Info No. 2
July 2007
Photo: Cat. No. Order No. Description Function
0058735849 0058735849
Extraction Arm,
50 mm (2 in.)
tube, articulated
joint and airflow
control valve,
bench clamp.
ESD safe.
Connects to the
WFE2ES fume
extraction base
unit through the
WFFMP50
system seal.
Position the
nozzle over your
soldering work
area for efficient
fume removal.
Exhaust Hoods and Tables
Photo: Cat. No. Order No. Description Function
WFCC50 0053637899
Exhaust Hood,
240 x 100 mm
(9.5 x 4 in.),
flexible 1 meter
(39.4 in.) hose,
ESD safe
Connects to the
WFE2ES fume
extraction base
unit through the
WFFMP50
system seal.
Position the hood
behind the
soldering work
area for efficient
fume removal.
WFDD50 0053638099
Extraction Plate,
300 x 210 mm
(12 x 8.3 in.),
flexible 1 meter
(39.4 in.) hose,
ESD safe
Connects to the
WFE2ES fume
extraction base
unit through the
WFFMP50
system seal. For
adhesive and
solvent fume
removal. Just
position your
work over the
fume extraction
grid.
0058735845 0058735845 Metal Exhaust
Hood, 200 x 100
mm (8 x 4 in.)
Connects to the
WFE2ES fume
extraction base
unit through the
WFFMP50
system seal.
Recommended
for use with hot
air systems such
as WHA3000P.
Page 5 of 7
Weller Info No. 2
July 2007
Replacement Filters
The filters in the WFE2ES must be changed re gularly to maintain peak performance. Failure to
change the filters regularly may cause severe damage to the base unit and void the warranty.
Photo: Cat. No. Order No. Description Function
0058735884
(comes with WFE2ES) 0058735884 F5 Fine Dust
Filter, 10 Per
Pack
The F5 grade pre-
filter will remove 40%
– 60% of particles up
to 100μm.
Photo: Cat. No. Order No. Description Function
0058735885
(upgrade from standard
F5 filter) 0058735885 F7 Fine Dust
Filter, 10 Per
Pack
The F5 grade
pre-filter will
remove 80% –
90% of particles
up to 10μm.
0058762701
(comes with WFE2ES) 0058762701
Filter cartridge
consisting of an
H12 HEPA filter
plus a wide band
gas filter
The H12 grade HEPA
filter will remove
99.5% of particles up
to 0.66 μm. The
activated carbon filter
element is for odor
control. The filter
consists of 50%
active carbon and
50% Puratex.
Puratex is a chemical
filtration agent that
that removes trace
amounts of molecular
contaminants, such
as acids and alkalis.
0058735883
(upgrade from standard
H12 filter) 0058735883
Filter cartridge
consisting of an
H13 HEPA filter
plus a wide band
gas filter
The H13 grade HEPA
filter will remove
99.95% of particles
up to 0.50 μm. The
activated carbon filter
element is for odor
control. The filter
consists of 50%
active carbon and
50% Puratex.
Puratex is a chemical
filtration agent that
that removes trace
amounts of molecular
contaminants, such
as acids and alkalis.
See the next page for a System Map.
Page 6 of 7