Loose R74 MKP Series Taped Fig.1 metallized Polypropylene film capacitor A.C. APPLICATIONS Fig.2 Typical applications: electronic lighting (i.e. car headlamp and ballast), pulse applications with high A.C. voltage and high current. PRODUCT CODE: R74 15 p 27.5 0.8 p = 10 Od 0.05 0.6 Pitch Box thickness (B) (mm) (mm) 10.0 All 15.0 <7.5 15.0 7.5 22.5 All 27.5 All 37.5 All p = 37.5 1.0 All dimensions are in mm. Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 R 7 4 13 GENERAL TECHNICAL DAta Dielectric: polypropylene film. Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: manufacturer's logo, series (R74), dielectric code (MKP), capacitance, tolerance, A.C. rated voltage, manufacturing date code. Climatic category: 55/105/56 IEC 60068-1 Operating temperature range: -55 to +105C Related documents: IEC 60384-16; IEC 60384-17 14 - Digit 1 to 3Series code. Digit 4 a.c. rated voltage: N = 400V L = 250V 9 = 900V 7 = 700V 5 = 500V Digit 5 Pitch: F=10.0mm; I =15.0mm; N=22.5mm; R=27.5mm W=37.5mm Digit 6 to 9 Maximum dimensions (mm) B max H max L max B +0.2 H +0.1 L +0.2 B +0.2 H +0.1 L +0.3 B +0.2 H +0.1 L +0.5 B +0.2 H +0.1 L +0.3 B +0.2 H +0.1 L +0.3 B +0.3 H +0.1 L +0.3 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use. Digit 14 Capacitance tolerance: J=5%; K=10% Table 1 (for more detailed information, please refer to page 14) Standard packaging style AMMO-PACK AMMO-PACK AMMO-PACK AMMO-PACK REEL O 355mm REEL O 500mm REEL O 500mm Loose, short leads Loose, long leads (p=10mm) Loose, long leads (p15mm) Lead length (mm) Taping style P2 (mm) 12.70 19.05 Fig. (No.) 1 2 Ordering code Pitch (mm) 10.0/15.0 22.5 (Digit 10 to 11) DQ DQ KN KL GY CK CK AA Kinked execution from p=15 mm to p=7.5 mm 4 +2 12.70 12.70 19.05 1 1 2 10.0/15.0 10.0/15.0 22.5/27.5 17 +1/-2 JM 30 +5 25 +2/-1 40 50 Note: Ammo-pack is the preferred packaging for taped version. Typical application: LAMP CAPACITOR IN ELECTRONIC BALLAST 89 09/2008 R74 MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 single sided metallized polypropylene film single side metallized polypropylene film 2 sections (400Vac) 1 section (250 Vac) Rated Cap. 250Vac* (1 section) Std dimensions B H L p Max dv/dt (V/s) Max K0 Rated Cap. Part Number (V /s) 2 0.010 F 4.0 9.0 13.0 10.0 300 38 E4 0.012 F 4.0 9.0 13.0 10.0 300 38 E4 0.015 F 5.0 11.0 13.0 10.0 300 38 E4 0.018 F 5.0 11.0 13.0 10.0 300 38 E4 0.022 F 6.0 12.0 13.0 10.0 300 38 E4 0.027 F 6.0 12.0 13.0 10.0 300 38 E4 0.015 F 5.0 11.0 18.0 15.0 250 31 E4 0.018 F 5.0 11.0 18.0 15.0 250 31 E4 0.022 F 5.0 11.0 18.0 15.0 250 31 E4 0.027 F 5.0 11.0 18.0 15.0 250 31 E4 0.033 F 5.0 11.0 18.0 15.0 250 31 E4 0.039 F 6.0 12.0 18.0 15.0 250 31 E4 0.047 F 6.0 12.0 18.0 15.0 250 31 E4 0.056 F 7.5 13.5 18.0 15.0 250 31 E4 0.068 F 7.5 13.5 18.0 15.0 250 31 E4 0.068 F 9.0 12.5 18.0 15.0 250 31 E4 0.082 F 8.5 14.5 18.0 15.0 250 31 E4 0.082 F 13.0 12.0 18.0 15.0 250 31 E4 0.10 F 8.5 14.5 18.0 15.0 250 31 E4 0.10 F 13.0 12.0 18.0 15.0 250 31 E4 0.12 F 10.0 16.0 18.0 15.0 250 31 E4 0.15 F 11.0 19.0 18.0 15.0 250 31 E4 R74LF 2100--0-- 2200 2700 3300 3900 4700 5600 6800 8200 6800 8200 0.010 0.012 0.015 0.018 0.022 0.022 0.027 0.027 0.033 0.033 0.039 0.039 0.047 0.056 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 R74LF 2120--0-R74LF 2150--0-R74LF 2180--0-R74LF 2220--0-R74LF 2270--0-R74LI 2150--0-R74LI 2180--0-R74LI 2220--0-R74LI 2270--0-R74LI 2330--0-R74LI 2390--0-R74LI 2470--0-R74LI 2560--0-R74LI 2680--0-R74LI 2680--6-R74LI 2820--0-R74LI 2820--6-R74LI 3100--0-R74LI 3100--6-R74LI 3120--0-R74LI 3150--0-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). pF pF pF pF pF pF pF pF pF pF F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 400Vac (2 sections) Std dimensions B H L p 4.0 4.0 4.0 5.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 6.0 6.0 7.5 7.5 9.0 8.5 13.0 8.5 13.0 10.0 13.0 10.0 11.0 6.0 7.0 7.0 8.5 10.0 10.0 11.0 13.0 9.0 9.0 11.0 11.0 13.0 13.0 14.0 14.0 14.0 18.0 18.0 11.0 11.0 13.0 16.0 16.0 19.0 19.0 20.0 24.0 24.0 30.0 9.0 9.0 9.0 11.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 12.0 12.0 13.5 13.5 12.5 14.5 12.0 14.5 12.0 16.0 12.0 16.0 19.0 15.0 16.0 16.0 17.0 18.5 18.5 20.0 22.0 17.0 17.0 20.0 20.0 22.0 22.0 28.0 28.0 28.0 33.0 33.0 22.0 22.0 24.0 28.5 28.5 32.0 32.0 40.0 44.0 44.0 45.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 Max dv/dt (V/s) 2200 2200 2200 2200 2200 2200 2200 2200 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 800 800 800 800 800 800 800 800 380 380 380 380 380 380 380 380 380 380 380 180 180 180 180 180 180 180 180 180 180 180 Max K0 (V /s) 570 E4 570 E4 570 E4 570 E4 570 E4 570 E4 570 E4 570 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 520 E4 208 E4 208 E4 208 E4 208 E4 208 E4 208 E4 208 E4 208 E4 70 E4 70 E4 70 E4 70 E4 70 E4 70 E4 70 E4 70 E4 70 E4 70 E4 70 E4 40 E4 40 E4 40 E4 40 E4 40 E4 40 E4 40 E4 40 E4 40 E4 40 E4 40 E4 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) 09/2008 90 Part Number 2 R74NF 1220--0-R74NF 1270--0-R74NF 1330--0-R74NF 1390--0-R74NF 1470--0-R74NF 1560--0-R74NF 1680--0-R74NF 1820--0-R74NI 1680--0-R74NI 1820--0-R74NI 2100--0-R74NI 2120--0-R74NI 2150--0-R74NI 2180--0-R74NI 2220--0-R74NI 2220--6-R74NI 2270--0-R74NI 2270--6-R74NI 2330--0-R74NI 2330--6-R74NI 2390--0-R74NI 2390--6-R74NI 2470--0-R74NI 2560--0-R74NN 2390--0-R74NN 2470--0-R74NN 2560--0-R74NN 2680--0-R74NN 2820--0-R74NN 3100--0-R74NN 3120--0-R74NN 3150--0-R74NR3150--0-R74NR3180--0-R74NR3220--0-R74NR3270--0-R74NR3330--0-R74NR3390--0-R74NR3470--0-R74NR3560--0-R74NR3680--0-R74NR3820--0-R74NR4100--0-R74NW3470--0-R74NW3560--0-R74NW3680--0-R74NW3820--0-R74NW4100--0-R74NW4120--0-R74NW4150--0-R74NW4180--0-R74NW4220--0-R74NW4270--0-R74NW4330--0-- R74 MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 single sided metallized polypropylene film 2 sections (500Vac) Rated Cap. 500Vac (2 sections) Std dimensions L p Max dv/dt (V/s) Max K0 B H 1000 pF 4.0 9.0 13.0 10.0 6000 1920 E4 1200 pF 4.0 9.0 13.0 10.0 6000 1920 E4 1500 pF 4.0 9.0 13.0 10.0 6000 1920 E4 1800 pF 4.0 9.0 13.0 10.0 6000 1920 E4 2200 pF 5.0 11.0 13.0 10.0 6000 1920 E4 2700 pF 5.0 11.0 13.0 10.0 6000 1920 E4 3300 pF 6.0 12.0 13.0 10.0 6000 1920 E4 3900 pF 6.0 12.0 13.0 10.0 6000 1920 E4 1500 pF 4.0 10.0 18.0 15.0 4500 1440 E4 1500 pF 5.0 11.0 18.0 15.0 4500 1440 E4 1800 pF 4.0 10.0 18.0 15.0 4500 1440 E4 1800 pF 5.0 11.0 18.0 15.0 4500 1440 E4 2200 pF 4.0 10.0 18.0 15.0 4500 1440 E4 2200 pF 5.0 11.0 18.0 15.0 4500 1440 E4 2700 pF 4.0 10.0 18.0 15.0 4500 1440 E4 2700 pF 5.0 11.0 18.0 15.0 4500 1440 E4 3300 pF 4.0 10.0 18.0 15.0 4500 1440 E4 3300 pF 5.0 11.0 18.0 15.0 4500 1440 E4 3900 pF 4.0 10.0 18.0 15.0 4500 1440 E4 3900 pF 5.0 11.0 18.0 15.0 4500 1440 E4 4700 pF 4.0 10.0 18.0 15.0 4500 1440 E4 4700 pF 5.0 11.0 18.0 15.0 4500 1440 E4 5600 pF 5.0 11.0 18.0 15.0 4500 1440 E4 6800 pF 6.0 12.0 18.0 15.0 4500 1440 E4 8200 pF 6.0 12.0 18.0 15.0 4500 1440 E4 0.010 F 6.0 12.0 18.0 15.0 4500 1440 E4 0.012 F 7.5 13.5 18.0 15.0 4500 1440 E4 0.015 F 7.5 13.5 18.0 15.0 4500 1440 E4 0.015 F 13.0 12.0 18.0 15.0 4500 1440 E4 0.018 F 8.5 14.5 18.0 15.0 4500 1440 E4 0.018 F 13.0 12.0 18.0 15.0 4500 1440 E4 0.022 F 10.0 16.0 18.0 15.0 4500 1440 E4 0.022 F 13.0 12.0 18.0 15.0 4500 1440 E4 0.027 F 10.0 16.0 18.0 15.0 4500 1440 E4 0.033 F 11.0 19.0 18.0 15.0 4500 1440 E4 Rated Cap. Part Number (V s) 2 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) R745F 1100--0-R745F 1120--0-R745F 1150--0-R745F 1180--0-- R745F 1220--0-R745F 1270--0-R745F 1330--0-R745F 1390--0-R745I 1150--3-R745I 1150--0-R745I 1180--3-R745I 1180--0-- R745I 1220--3-R745I 1220--0-R745I 1270--3-R745I 1270--0-R745I 1330--3-R745I 1330--0-R745I 1390--3-R745I 1390--0-R745I 1470--3-R745I 1470--0-R745I 1560--0-R745I 1680--0-R745I 1820--0-R745I 2100--0-R745I 2120--0-R745I 2150--0-R745I 2150--6-R745I 2180--0-R745I 2180--6-R745I 2220--0-R745I 2220--6-R745I 2270--0-R745I 2330--0-- 500Vac (2 sections) Std dimensions B H L p Max dv/dt (V/s) Max K0 Part Number (V s) 2 0.018 F 6.0 15.0 26.5 22.5 1800 576 E4 0.022 F 6.0 15.0 26.5 22.5 1800 576 E4 0.027 F 7.0 16.0 26.5 22.5 1800 576 E4 0.033 F 7.0 16.0 26.5 22.5 1800 576 E4 0.039 F 8.5 17.0 26.5 22.5 1800 576 E4 0.047 F 10.0 18.5 26.5 22.5 1800 576 E4 0.056 F 10.0 18.5 26.5 22.5 1800 576 E4 0.068 F 11.0 20.0 26.5 22.5 1800 576 E4 0.082 F 13.0 22.0 26.5 22.5 1800 576 E4 0.10 F 13.0 22.0 26.5 22.5 1800 576 E4 0.10 F 9.0 17.0 32.0 27.5 500 160 E4 0.12 F 9.0 17.0 32.0 27.5 500 160 E4 0.15 F 9.0 17.0 32.0 27.5 500 160 E4 0.18 F 11.0 20.0 32.0 27.5 500 160 E4 0.22 F 11.0 20.0 32.0 27.5 500 160 E4 0.27 F 13.0 22.0 32.0 27.5 500 160 E4 0.33 F 14.0 28.0 32.0 27.5 500 160 E4 0.39 F 14.0 28.0 32.0 27.5 500 160 E4 0.47 F 14.0 28.0 32.0 27.5 500 160 E4 0.56 F 18.0 33.0 32.0 27.5 500 160 E4 0.68 F 18.0 33.0 32.0 27.5 500 160 E4 0.82 F 22.0 37.0 32.0 27.5 500 160 E4 1.0 F 22.0 37.0 32.0 27.5 500 160 E4 0.33 F 11.0 22.0 41.5 37.5 300 96 E4 0.39 F 11.0 22.0 41.5 37.5 300 96 E4 0.47 F 13.0 24.0 41.5 37.5 300 96 E4 0.56 F 13.0 24.0 41.5 37.5 300 96 E4 0.68 F 16.0 28.5 41.5 37.5 300 96 E4 0.82 F 16.0 28.5 41.5 37.5 300 96 E4 1.0 F 19.0 32.0 41.5 37.5 300 96 E4 1.2 F 19.0 32.0 41.5 37.5 300 96 E4 1.5 F 20.0 40.0 41.5 37.5 300 96 E4 1.8 F 24.0 44.0 41.5 37.5 300 96 E4 2.2 F 24.0 44.0 41.5 37.5 300 96 E4 R745N2180--0-R745N2220--0-R745N2270--0-R745N2330--0-R745N2390--0-R745N2470--0-R745N2560--0-R745N2680--0-R745N2820--0-R745N3100--0-R745R3100--0-R745R3120--0-R745R3150--0-R745R3180--0-R745R3220--0-R745R3270--0-R745R3330--0-R745R3390--0-R745R3470--0-R745R3560--0-R745R3680--0-R745R3820--0-R745R4100--0-- R745W3330--0-R745W3390--0-R745W3470--0-R745W3560--0-R745W3680--0-R745W3820--0-R745W4100--0-R745W4120--0-R745W4150--0-R745W4180--0-R745W4220--0-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 91 09/2008 R74 MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 single sided metallized polypropylene film single sided metallized polypropylene film 3 sections (700Vac) Rated Cap. 470 680 820 1000 1000 1200 1200 1500 1500 1800 1800 2200 2200 2700 3300 3900 4700 5600 6800 8200 8200 0.010 0.010 0.012 0.012 0.015 0.018 8200 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF F F F F F F pF F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 700Vac (3 sections) Std dimensions B H L p 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 5.0 11.0 18.0 15.0 4.0 10.0 18.0 15.0 5.0 11.0 18.0 15.0 4.0 10.0 18.0 15.0 5.0 11.0 18.0 15.0 4.0 10.0 18.0 15.0 5.0 11.0 18.0 15.0 4.0 10.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 7.5 13.5 18.0 15.0 9.0 12.5 18.0 15.0 8.5 14.5 18.0 15.0 13.0 12.0 18.0 15.0 10.0 16.0 18.0 15.0 13.0 12.0 18.0 15.0 10.0 16.0 18.0 15.0 11.0 19.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 13.0 22.0 32.0 27.5 14.0 28.0 32.0 27.5 14.0 28.0 32.0 27.5 18.0 33.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 19.0 32.0 41.5 37.5 20.0 40.0 41.5 37.5 24.0 44.0 41.5 37.5 24.0 44.0 41.5 37.5 30.0 45.0 41.5 37.5 4 sections (900Vac) Max dv/dt (V/s) 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 700 700 700 700 700 700 700 700 700 700 700 700 400 400 400 400 400 400 400 400 400 400 400 Max K0 (V /s) 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 1800 E4 1800 E4 1800 E4 1800 E4 1800 E4 1800 E4 1800 E4 1800 E4 1800 E4 1800 E4 1800 E4 1800 E4 280 E4 280 E4 280 E4 280 E4 280 E4 280 E4 280 E4 280 E4 280 E4 280 E4 280 E4 280 E4 160 E4 160 E4 160 E4 160 E4 160 E4 160 E4 160 E4 160 E4 160 E4 160 E4 160 E4 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) 09/2008 Part Number Rated Cap. 2 R747I 0470--3-R747I 0680--3-R747I 0820--3-R747I 1100--3-R747I 1100--0-R747I 1120--3-R747I 1120--0-R747I 1150--3-R747I 1150--0-R747I 1180--3-R747I 1180--0-R747I 1220--3-R747I 1220--0-R747I 1270--0-R747I 1330--0-R747I 1390--0-R747I 1470--0-R747I 1560--0-R747I 1680--0-R747I 1820--0-R747I 1820--6-R747I 2100--0-R747I 2100--6-R747I 2120--0-R747I 2120--6-R747I 2150--0-R747I 2180--0-R747N1820--0-R747N2100--0-R747N2120--0-R747N2150--0-R747N2180--0-R747N2220--0-R747N2270--0-R747N2330--0-R747N2390--0-R747N2470--0-R747N2560--0-R747N2680--0-R747R2390--0-R747R2470--0-R747R2560--0-R747R2680--0-R747R2820--0-R747R3100--0-R747R3120--0-R747R3150--0-R747R3180--0-R747R3220--0-R747R3270--0-R747R3330--0-R747W3150--0-R747W3180--0-R747W3220--0-R747W3270--0-R747W3330--0-R747W3390--0-R747W3470--0-R747W3560--0-R747W3680--0-R747W3820--0-R747W4100--0-- 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 pF pF pF pF pF pF pF pF pF pF pF pF F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 900Vac (4 sections) Std dimensions B H L p 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 13.0 22.0 32.0 27.5 14.0 28.0 32.0 27.5 14.0 28.0 32.0 27.5 18.0 33.0 32.0 27.5 18.0 33.0 32.0 27.5 18.0 33.0 32.0 27.5 11.0 22.0 41.5 37.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 20.0 40.0 41.5 37.5 20.0 40.0 41.5 37.5 24.0 44.0 41.5 37.5 24.0 44.0 41.5 37.5 Max dv/dt (V/s) 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 900 900 900 900 900 900 900 900 900 900 900 Max K0 Part Number (V /s) 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 1100 E4 660 E4 660 E4 660 E4 660 E4 660 E4 660 E4 660 E4 660 E4 660 E4 660 E4 660 E4 400 E4 400 E4 400 E4 400 E4 400 E4 400 E4 400 E4 400 E4 400 E4 400 E4 400 E4 R749N1100--0-R749N1120--0-R749N1150--0-R749N1180--0-R749N1220--0-R749N1270--0-R749N1330--0-R749N1390--0-R749N1470--0-R749N1560--0-R749N1680--0-R749N1820--0-R749N2100--0-R749N2120--0-R749N2150--0-R749N2180--0-R749N2220--0-R749N2270--0-R749N2330--0-R749R2220--0-R749R2270--0-R749R2330--0-R749R2390--0-R749R2470--0-R749R2560--0-R749R2680--0-R749R2820--0-R749R3100--0-R749R3120--0-R749R3150--0-R749W2680--0-R749W2820--0-R749W3100--0-R749W3120--0-R749W3150--0-R749W3180--0-R749W3220--0-R749W3270--0-R749W3330--0-R749W3390--0-R749W3470--0-- 2 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 92 R74 MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 electrical characteristics test method and performance Rated voltage (VR): 250Vac ( 630Vdc) - 400Vac (1300Vdc) 500Vac (1600Vdc) - 700Vac (2000Vdc) 900Vac (2200Vdc) Damp heat, steady state: Rated temperature (TR): Test conditions Temperature: Relative humidity (RH): Test duration: +85C Temperature derated voltage: for temperatures between +85C and +105C a decreasing factor of 1.25% per degree C on the rated voltage VR (a.c. and d.c.) has to be applied. Capacitance range: 470pF to 3.3 F Performance Capacitance change |C/C|: 2% 10x10-4 at 1kHz DF change (tg): Insulation resistance: 50% of initial limit. Endurance: Test conditions Capacitance values: E12 series (IEC 60063 Norm). Temperature: Test duration: Voltage applied: Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K). Performance 10 9 15 10 22.5 18 27.5 18 37.5 20 Dissipation factor (DF): Resistance to soldering heat: Test conditions tg 10-4 at +25C 5C C 2.2nF 2.2nF < C 0.027F 0.027F < C 0.1F 0.1F < C 1F C >1F 1kHz 10kHz 100kHz 1.0 1.0 4.0 5.0 6.0 2.0 2.0 6.0 8.0 3.0 8.0 25.0 Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance 1x105 M 30000s +85C2C 2000 h 1.25xVR (a.c.) at 50Hz Capacitance change |C/C|: 5% DF change (tg): 15x10-4 at 10kHz Insulation resistance: 50% of initial limit. Total self inductance: (L) (Lead length (2 mm) Pitch (mm) L (nH) +40C2C 93% 2% 56 days Solder bath temperature: 260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change|C/C|: 1% DF change (tg): 10x10-4 at 10kHz Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (page 12). Performance +25C5C 1 min 100Vdc Capacitance change |C/C|: 0.5% for C0.33F for C>0.33F Test voltage between terminations: 1.6xVR applied for 2 s at 25C5C 93 09/2008 R74 MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 85C) Note: p (pitch) in mm. 09/2008 94 R74 MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 85C) Note: p (pitch) in mm. 95 09/2008 R74 MINI VERSION Loose MKP Series Taped Fig.1 metallized Polypropylene film capacitor A.C. APPLICATIONS Fig.2 Typical applications: electronic lighting (i.e. car headlamp and ballast), pulse applications with high A.C. voltage and high current. PRODUCT CODE: R74 p = 10 0.6 Od 0.05 Pitch Box thickness (B) (mm) (mm) 10.0 All 15.0 <7.5 15.0 7.5 p = 15 0.8 Maximum dimensions (mm) B max H max L max B +0.2 H +0.1 L +0.2 B +0.2 H +0.1 L +0.3 B +0.2 H +0.1 L +0.5 All dimensions are in mm. Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 4 R 7 4 7 5 6 7 8 9 10 11 12 13 R - GENERAL TECHNICAL DAta Dielectric: polypropylene film. Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V-0. Marking: manufacturer's logo, series (R74), dielectric code (MKP), capacitance, tolerance, A.C. rated voltage, manufacturing date code. Climatic category: 55/105/56 IEC 60068-1 Operating temperature range: -55 to +105C Related documents: IEC 60384-16; IEC 60384-17 14 Digit 1 to 3Series code. Digit 4 a.c. rated voltage: 6 = 600V Digit 5 Pitch: F=10.0mm; I =15.0mm. Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use. Digit 14 Capacitance tolerance: J=5%; K=10% Table 1 (for more detailed information, please refer to page 14) Standard packaging style AMMO-PACK AMMO-PACK AMMO-PACK REEL O 355mm REEL O 500mm Loose, short leads Loose, long leads (p=10mm) Loose, long leads (p15mm) Lead length (mm) Taping style P2 (mm) 12.70 Fig. (No.) 1 Ordering code Pitch (mm) 10.0/15.0 (Digit 10 to 11) DQ KN KL GY CK AA Kinked execution from p=15 mm to p=7.5 mm 4 +2 12.70 12.70 1 1 10.0/15.0 10.0/15.0 17 -2/+1 JM 30 +5 25 -1/+2 40 50 Note: Ammo-pack is the preferred packaging for taped version. Typical application: LAMP CAPACITOR IN ELECTRONIC BALLAST 09/2008 96 R74 MINI VERSION MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 single sided metallized polypropylene film 3 sections (700Vac) Rated Cap. 470 680 820 1000 1200 1500 1800 2200 2700 3300 3900 2300 2700 3900 4700 6800 0.012 0.015 0.018 pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF F F F 600Vac (3 sections) Std dimensions B H L p 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 5.0 11.0 13.0 10.0 5.0 11.0 13.0 10.0 6.0 12.0 13.0 10.0 6.0 12.0 13.0 10.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 8.5 14.5 18.0 15.0 8.5 14.5 18.0 15.0 10.0 16.0 18.0 15.0 Max dv/dt (V/s) 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 9500 9500 9500 9500 9500 9500 9500 9500 Max K0 Part Number (V /s) 4000 E4 4000 E4 4000 E4 4000 E4 4000 E4 4000 E4 4000 E4 4000 E4 4000 E4 4000 E4 4000 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 3800 E4 R746F 0470--0-R746F 0680--0-R746F 0820--0-R746F 1100--0-R746F 1120--0-R746F 1150--0-R746F 1180--0-R746F 1220--0-R746F 1270--0-R746F 1330--0-R746F 1390--0-R746I 1230--0-R746I 1270--0-R746I 1390--0-R746I 1470--0-R746I 1680--0-R746I 2120--0-R746I 2150--0-R746I 2180--0-- 2 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 97 09/2008 R74 MINI VERSION MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 electrical characteristics test method and performance Rated voltage (VR): Damp heat, steady state: 600Vac (2000Vdc) Rated temperature (TR): Test conditions Temperature: Relative humidity (RH): Test duration: +85C Temperature derated voltage: for temperatures between +85C and +105C a decreasing factor of 1.25% per degree C on the rated voltage VR (a.c. and d.c.) has to be applied. Capacitance range: 470pF to 0.018F Performance Capacitance change |C/C|: 2% 10x10-4 at 1kHz DF change (tg): Insulation resistance: 50% of initial limit. Endurance: Capacitance values: E12 series (IEC 60063 Norm). Test conditions Temperature: Test duration: Voltage applied: Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K). Total self inductance: (L) (Lead length (2 mm) Pitch (mm) L (nH) 10 9 Performance Dissipation factor (DF): Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: +85C2C 2000 h VR (a.c.) at 50Hz Capacitance change |C/C|: 10% DF change (tg): 15x10-4 at 10kHz Insulation resistance: 50% of initial limit. 15 10 Resistance to soldering heat: tg 10-4 at +25C 5C All +40C2C 93% 2% 56 days Test conditions 1kHz 100kHz 15 15 +25C5C 1 min 100Vdc Performance Solder bath temperature: 260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change|C/C|: 1% DF change (tg): 10x10-4 at 10kHz Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (page 12). 1x105 M Performance Capacitance change |C/C|: 1% Test voltage between terminations: 1.6xVR applied for 2 s at 25C5C 09/2008 98 R74 MINI VERSION MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 85C) MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 85C) 99 09/2008 Loose R74 125C MKP Series Taped Fig.1 metallized Polypropylene film capacitor A.C. APPLICATIONS Fig.2 Typical applications: electronic lighting (i.e. car headlamp and ballast), pulse applications with high A.C. voltage and high current. PRODUCT CODE: R74 p = 10 0.6 Od 0.05 Pitch (mm) 10.0 15.0 15.0 22.5 p 15 0.8 All dimensions are in mm. Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 R 7 4 12 13 H - 14 Pitch: F=10.0mm; I =15.0mm; N=22.5mm; Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use. Digit 14 Capacitance tolerance: J=5%; K=10% Table 1 (for more detailed information, please refer to page 14) Standard packaging style AMMO-PACK AMMO-PACK AMMO-PACK AMMO-PACK REEL O 355mm REEL O 500mm REEL O 500mm Loose, short leads Loose, long leads (p=10mm) Loose, long leads (p15mm) Lead length (mm) Taping style P2 (mm) 12.70 19.05 Fig. (No.) 1 2 Ordering code Pitch (mm) 10.0/15.0 22.5 (Digit 10 to 11) DQ DQ KN KL GY CK CK AA Kinked execution from p=15 mm to p=7.5 mm 4 +2 12.70 12.70 19.05 1 1 2 10.0/15.0 10.0/15.0 22.5 17 +1/-2 JM 30 +5 25 +2/-1 40 50 Note: Ammo-pack is the preferred packaging for taped version. Typical application: LAMP CAPACITOR IN ELECTRONIC BALLAST 09/2008 Maximum dimensions (mm) B max H max L max B +0.2 H +0.1 L +0.2 B +0.2 H +0.1 L +0.3 B +0.2 H +0.1 L +0.5 B +0.2 H +0.1 L +0.3 GENERAL TECHNICAL DAta Dielectric: polypropylene film. Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: manufacturer's logo, series (R74), dielectric code (MKP), capacitance, tolerance, A.C. rated voltage, manufacturing date code. Climatic category: 55/125/56 IEC 60068-1 Operating temperature range: -55 to +125C Related documents: IEC 60384-16; IEC 60384-17 Digit 1 to 3Series code. Digit 4 a.c. rated voltage: 7 = 700V 5 = 500V Digit 5 Digit 6 to 9 Box thickness (mm) All <7.5 7.5 All 100 R74 125C MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 single sided metallized polypropylene film single sided metallized polypropylene film 2 sections (500Vac) Rated Cap. 1000 1200 1500 1800 2200 2700 3300 3900 2700 3300 3900 4700 5600 6800 8200 0.010 0.012 0.015 0.015 0.018 0.018 0.022 0.022 0.027 0.033 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF F F F F F F F F F F F F F F F F F F F F 500Vac (2 sections) Std dimensions B H L p 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 5.0 11.0 13.0 10.0 5.0 11.0 13.0 10.0 5.0 11.0 13.0 10.0 6.0 12.0 13.0 10.0 6.0 12.0 13.0 10.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 7.5 13.5 18.0 15.0 13.0 12.0 18.0 15.0 8.5 14.5 18.0 15.0 13.0 12.0 18.0 15.0 10.0 16.0 18.0 15.0 13.0 12.0 18.0 15.0 10.0 16.0 18.0 15.0 11.0 19.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 13.0 22.0 26.5 22.5 3 sections (700Vac) Max dv/dt (V/s) 6000 6000 6000 6000 6000 6000 6000 6000 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 Max K0 (V2/s) 1.28 E7 1.28 E7 1.28 E7 1.28 E7 1.28 E7 1.28 E7 1.28 E7 1.28 E7 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 8.00 E6 3.84 E6 3.84 E4 3.84 E4 3.84 E4 3.84 E4 3.84 E4 3.84 E4 3.84 E4 3.84 E4 3.84 E4 Rated Cap. Part Number R745F 1100--H0R745F 1120--H0R745F 1150--H0R745F 1180--H0R745F 1220--H0R745F 1270--H0R745F 1330--H0R745F 1390--H0R745I 1270--H3R745I 1330--H3R745I 1390--H3R745I 1470--H0R745I 1560--H0R745I 1680--H0R745I 1820--H0R745I 2100--H0R745I 2120--H0R745I 2150--H0R745I 2150--H1R745I 2180--H0R745I 2180--H1R745I 2220--H0R745I 2220--H1R745I 2270--H0R745I 2330--H0R745N2180--H0R745N2220--H0R745N2270--H0R745N2330--H0R745N2390--H0R745N2470--H0R745N2560--H0R745N2680--H0R745N2820--H0R745N3100--H0- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) All dimensions are in mm Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 680 820 1000 1200 1300 1800 2200 2500 2700 3300 3600 3900 4300 4700 5200 5600 6200 6800 8200 8200 0.010 0.010 0.012 0.012 0.015 0.018 6200 6800 7500 8200 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.062 0.068 pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF F F F F F F pF pF pF pF F F F F F F F F F F F F 700Vac (3 sections) Std dimensions B H L p 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 4.0 10.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 7.5 13.5 18.0 15.0 7.5 13.5 18.0 15.0 9.0 12.5 18.0 15.0 8.5 14.5 18.0 15.0 13.0 12.0 18.0 15.0 10.0 16.0 18.0 15.0 13.0 12.0 18.0 15.0 10.0 16.0 18.0 15.0 11.0 19.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 13.0 22.0 26.5 22.5 13.0 22.0 26.5 22.5 Max dv/dt (V/s) 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 9500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 Max K0 Part Number (V /s) 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 960 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 420 E4 R747I0680--H3R747I0820--H3R747I1100--H3R747I1120--H3R747I1130--H3R747I1180--H3R747I1220--H3R747I1250--H3R747I1270--H0R747I1330--H0R747I1360--H0R747I1390--H0R747I1430--H0R747I1470--H0R747I1520--H0R747I1560--H0R747I1620--H0R747I1680--H0R747I1820--H0R747I1820--H1R747I2100--H0R747I2100--H1R747I2120--H0R747I2120--H1R747I2150--H0R747I2180--H0R747N1620--H0R747N1680--H0R747N1750--H0R747N1820--H0R747N2100--H0R747N2120--H0R747N2150--H0R747N2180--H0R747N2220--H0R747N2270--H0R747N2330--H0R747N2390--H0R747N2470--H0R747N2560--H0R747N2620--H0R747N2680--H0- 2 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%) 101 09/2008 R74 125C MKP Series metallized Polypropylene film capacitor A.C. APPLICATIONS PRODUCT CODE: R74 electrical characteristics test method and performance Rated voltage (VR): 500Vac (1600Vdc) - 700Vac (2000Vdc) Damp heat, steady state: Rated temperature (TR): Test conditions +105C Temperature: Relative humidity (RH): Test duration: Temperature derated voltage: for temperatures between +105C and +125C a decreasing factor of 1.25% per degree C on the rated voltage VR (a.c. and d.c.) has to be applied. Performance Capacitance change |C/C|: 2% 10x10-4 at 1kHz DF change (tg): Insulation resistance: 50% of initial limit. Capacitance range: 680pF to 0.1 F Capacitance values: E12 series (IEC 60063 Norm) mainly. Endurance: Test conditions 1 Temperature: Test duration: Voltage applied: Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K). Total self inductance: (L) (Lead length (2 mm) Pitch (mm) L (nH) 10 9 15 10 Test conditions 2 Temperature: Test duration: Voltage applied: 22.5 18 Performance Dissipation factor (DF): 1kHz 10kHz 100kHz 1.0 1.0 4.0 2.0 2.0 6.0 3.0 8.0 25.0 Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance 1x105 M Test voltage between terminations: +105C 2C 2000 h 1.25 x VR (a.c.) at 50Hz Resistance to soldering heat: Test conditions 1 Solder bath temperature: 260C5C Dipping time (with heat screen):10 s1 s Performance +25C5C 1 min 100Vdc for C0.33F +125C +0/-2C 2000 h 0.94 x VR (a.c.) at 50Hz Capacitance change |C/C|: 5% DF change (tg): 15x10-4 at 10kHz Insulation resistance: 50% of initial limit. tg 10 at +25C 5C -4 C 2.2nF 2.2nF < C 0.027F 0.027F < C 0.1F +40C2C 93% 2% 56 days Capacitance change|C/C|: 1% DF change (tg): 10x10-4 at 10kHz Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (page 12). 1.6xVR applied for 2 s at 25C5C Performance Capacitance change |C/C|: 0.5% 09/2008 102 R74 125C MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR A.C. APPLICATIONS PRODUCT CODE: R74 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 85C) Note: p (pitch) in mm. 103 09/2008 R74 125C MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR A.C. APPLICATIONS PRODUCT CODE: R74 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 85C) Note: p (pitch) in mm. 09/2008 104