09/2008
89
Ød ±0.05 p = 10 15 ≤ p ≤ 27.5 p = 37.5
0.6 0.8 1.0
All dimensions are in mm.
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
R 7 4 -
Digit 1 to 3 Series code.
Digit 4 a.c. rated voltage:
L = 250V N = 400V 5 = 500V
7 = 700V 9 = 900V
Digit 5 Pitch: F=10.0mm; I =15.0mm; N=22.5mm;
R=27.5mm W=37.5mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use.
Digit 14 Capacitance tolerance:
J=5%; K=10%
R74
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
Typical applications: electronic lighting (i.e. car headlamp
and ballast), pulse applications with high A.C. voltage and
high current.
PRODUCT CODE: R74
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame
retardant according to UL94 V0.
Marking: manufacturer’s logo, series (R74), dielectric
code (MKP), capacitance, tolerance, A.C. rated
voltage, manufacturing date code.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-16; IEC 60384-17
Loose
Fig.1
Taped
Fig.2
Typical application: LAMP CAPACITOR IN ELECTRONIC BALLAST
Table 1 (for more detailed information, please refer to page 14)
Standard packaging
style
Lead length Taping style Ordering code
(mm)
P2
(mm)
Fig.
(No.)
Pitch
(mm) (Digit 10 to 11)
AMMO-PACK 12.70 1 10.0/15.0 DQ
AMMO-PACK 19.05 2 22.5 DQ
AMMO-PACK
AMMO-PACK Kinked execution from p=15 mm to p=7.5 mm KN
KL
REEL Ø 355mm 12.70 1 10.0/15.0 GY
REEL Ø 500mm 12.70 1 10.0/15.0 CK
REEL Ø 500mm 19.05 2 22.5/27.5 CK
Loose, short leads 4 +2 AA
Loose, long leads
(p=10mm) 17 +1/-2 JM
Loose, long leads
(p≥15mm)
30 +5
25 +2/-1
40
50
Note: Ammo-pack is the preferred packaging for taped version.
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
09/2008 90
R74
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
1 section
(250 Vac)
single side metallized
polypropylene lm
2 sections
(400Vac)
single sided metallized
polypropylene lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table. The dv/dt test is carried
out at 2 times the above values.
*Not suitable for across-the-line applications. Please refer to
Interference Suppression Capacitors (page 145).
All dimensions are in mm.
Rated
Cap.
250Vac* (1 section)
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.010 µF 4.0 9.0 13.0 10.0 300 38 E4 R74LF 2100--0--
0.012 µF 4.0 9.0 13.0 10.0 300 38 E4 R74LF 2120--0--
0.015 µF 5.0 11.0 13.0 10.0 300 38 E4 R74LF 2150--0--
0.018 µF 5.0 11.0 13.0 10.0 300 38 E4 R74LF 2180--0--
0.022 µF 6.0 12.0 13.0 10.0 300 38 E4 R74LF 2220--0--
0.027 µF 6.0 12.0 13.0 10.0 300 38 E4 R74LF 2270--0--
0.015 µF 5.0 11.0 18.0 15.0 250 31 E4 R74LI 2150--0--
0.018 µF 5.0 11.0 18.0 15.0 250 31 E4 R74LI 2180--0--
0.022 µF 5.0 11.0 18.0 15.0 250 31 E4 R74LI 2220--0--
0.027 µF 5.0 11.0 18.0 15.0 250 31 E4 R74LI 2270--0--
0.033 µF 5.0 11.0 18.0 15.0 250 31 E4 R74LI 2330--0--
0.039 µF 6.0 12.0 18.0 15.0 250 31 E4 R74LI 2390--0--
0.047 µF 6.0 12.0 18.0 15.0 250 31 E4 R74LI 2470--0--
0.056 µF 7.5 13.5 18.0 15.0 250 31 E4 R74LI 2560--0--
0.068 µF 7.5 13.5 18.0 15.0 250 31 E4 R74LI 2680--0--
0.068 µF 9.0 12.5 18.0 15.0 250 31 E4 R74LI 2680--6--
0.082 µF 8.5 14.5 18.0 15.0 250 31 E4 R74LI 2820--0--
0.082 µF 13.0 12.0 18.0 15.0 250 31 E4 R74LI 2820--6--
0.10 µF 8.5 14.5 18.0 15.0 250 31 E4 R74LI 3100--0--
0.10 µF 13.0 12.0 18.0 15.0 250 31 E4 R74LI 3100--6--
0.12 µF 10.0 16.0 18.0 15.0 250 31 E4 R74LI 3120--0--
0.15 µF 11.0 19.0 18.0 15.0 250 31 E4 R74LI 3150--0--
Rated
Cap.
400Vac (2 sections)
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
2200 pF 4.0 9.0 13.0 10.0 2200 570 E4 R74NF 1220--0--
2700 pF 4.0 9.0 13.0 10.0 2200 570 E4 R74NF 1270--0--
3300 pF 4.0 9.0 13.0 10.0 2200 570 E4 R74NF 1330--0--
3900 pF 5.0 11.0 13.0 10.0 2200 570 E4 R74NF 1390--0--
4700 pF 5.0 11.0 13.0 10.0 2200 570 E4 R74NF 1470--0--
5600 pF 5.0 11.0 13.0 10.0 2200 570 E4 R74NF 1560--0--
6800 pF 6.0 12.0 13.0 10.0 2200 570 E4 R74NF 1680--0--
8200 pF 6.0 12.0 13.0 10.0 2200 570 E4 R74NF 1820--0--
6800 pF 5.0 11.0 18.0 15.0 2000 520 E4 R74NI 1680--0--
8200 pF 5.0 11.0 18.0 15.0 2000 520 E4 R74NI 1820--0--
0.010 µF 5.0 11.0 18.0 15.0 2000 520 E4 R74NI 2100--0--
0.012 µF 6.0 12.0 18.0 15.0 2000 520 E4 R74NI 2120--0--
0.015 µF 6.0 12.0 18.0 15.0 2000 520 E4 R74NI 2150--0--
0.018 µF 7.5 13.5 18.0 15.0 2000 520 E4 R74NI 2180--0--
0.022 µF 7.5 13.5 18.0 15.0 2000 520 E4 R74NI 2220--0--
0.022 µF 9.0 12.5 18.0 15.0 2000 520 E4 R74NI 2220--6--
0.027 µF 8.5 14.5 18.0 15.0 2000 520 E4 R74NI 2270--0--
0.027 µF 13.0 12.0 18.0 15.0 2000 520 E4 R74NI 2270--6--
0.033 µF 8.5 14.5 18.0 15.0 2000 520 E4 R74NI 2330--0--
0.033 µF 13.0 12.0 18.0 15.0 2000 520 E4 R74NI 2330--6--
0.039 µF 10.0 16.0 18.0 15.0 2000 520 E4 R74NI 2390--0--
0.039 µF 13.0 12.0 18.0 15.0 2000 520 E4 R74NI 2390--6--
0.047 µF 10.0 16.0 18.0 15.0 2000 520 E4 R74NI 2470--0--
0.056 µF 11.0 19.0 18.0 15.0 2000 520 E4 R74NI 2560--0--
0.039 µF 6.0 15.0 26.5 22.5 800 208 E4 R74NN 2390--0--
0.047 µF 7.0 16.0 26.5 22.5 800 208 E4 R74NN 2470--0--
0.056 µF 7.0 16.0 26.5 22.5 800 208 E4 R74NN 2560--0--
0.068 µF 8.5 17.0 26.5 22.5 800 208 E4 R74NN 2680--0--
0.082 µF 10.0 18.5 26.5 22.5 800 208 E4 R74NN 2820--0--
0.10 µF 10.0 18.5 26.5 22.5 800 208 E4 R74NN 3100--0--
0.12 µF 11.0 20.0 26.5 22.5 800 208 E4 R74NN 3120--0--
0.15 µF 13.0 22.0 26.5 22.5 800 208 E4 R74NN 3150--0--
0.15 µF 9.0 17.0 32.0 27.5 380 70 E4 R74NR3150--0--
0.18 µF 9.0 17.0 32.0 27.5 380 70 E4 R74NR3180--0--
0.22 µF 11.0 20.0 32.0 27.5 380 70 E4 R74NR3220--0--
0.27 µF 11.0 20.0 32.0 27.5 380 70 E4 R74NR3270--0--
0.33 µF 13.0 22.0 32.0 27.5 380 70 E4 R74NR3330--0--
0.39 µF 13.0 22.0 32.0 27.5 380 70 E4 R74NR3390--0--
0.47 µF 14.0 28.0 32.0 27.5 380 70 E4 R74NR3470--0--
0.56 µF 14.0 28.0 32.0 27.5 380 70 E4 R74NR3560--0--
0.68 µF 14.0 28.0 32.0 27.5 380 70 E4 R74NR3680--0--
0.82 µF 18.0 33.0 32.0 27.5 380 70 E4 R74NR3820--0--
1.0 µF 18.0 33.0 32.0 27.5 380 70 E4 R74NR4100--0--
0.47 µF 11.0 22.0 41.5 37.5 180 40 E4 R74NW3470--0--
0.56 µF 11.0 22.0 41.5 37.5 180 40 E4 R74NW3560--0--
0.68 µF 13.0 24.0 41.5 37.5 180 40 E4 R74NW3680--0--
0.82 µF 16.0 28.5 41.5 37.5 180 40 E4 R74NW3820--0--
1.0 µF 16.0 28.5 41.5 37.5 180 40 E4 R74NW4100--0--
1.2 µF 19.0 32.0 41.5 37.5 180 40 E4 R74NW4120--0--
1.5 µF 19.0 32.0 41.5 37.5 180 40 E4 R74NW4150--0--
1.8 µF 20.0 40.0 41.5 37.5 180 40 E4 R74NW4180--0--
2.2 µF 24.0 44.0 41.5 37.5 180 40 E4 R74NW4220--0--
2.7 µF 24.0 44.0 41.5 37.5 180 40 E4 R74NW4270--0--
3.3 µF 30.0 45.0 41.5 37.5 180 40 E4 R74NW4330--0--
09/2008
91
R74
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
2 sections
(500Vac)
single sided metallized
polypropylene lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
The dv/dt test is carried out at 2 times the above values.
All dimensions are in mm.
Rated
Cap.
500Vac (2 sections)
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2µs)
1000 pF 4.0 9.0 13.0 10.0 6000 1920 E4 R745F 1100--0--
1200 pF 4.0 9.0 13.0 10.0 6000 1920 E4 R745F 1120--0--
1500 pF 4.0 9.0 13.0 10.0 6000 1920 E4 R745F 1150--0--
1800 pF 4.0 9.0 13.0 10.0 6000 1920 E4 R745F 1180--0--
2200 pF 5.0 11.0 13.0 10.0 6000 1920 E4 R745F 1220--0--
2700 pF 5.0 11.0 13.0 10.0 6000 1920 E4 R745F 1270--0--
3300 pF 6.0 12.0 13.0 10.0 6000 1920 E4 R745F 1330--0--
3900 pF 6.0 12.0 13.0 10.0 6000 1920 E4 R745F 1390--0--
1500 pF 4.0 10.0 18.0 15.0 4500 1440 E4 R745I 1150--3--
1500 pF 5.0 11.0 18.0 15.0 4500 1440 E4 R745I 1150--0--
1800 pF 4.0 10.0 18.0 15.0 4500 1440 E4 R745I 1180--3--
1800 pF 5.0 11.0 18.0 15.0 4500 1440 E4 R745I 1180--0--
2200 pF 4.0 10.0 18.0 15.0 4500 1440 E4 R745I 1220--3--
2200 pF 5.0 11.0 18.0 15.0 4500 1440 E4 R745I 1220--0--
2700 pF 4.0 10.0 18.0 15.0 4500 1440 E4 R745I 1270--3--
2700 pF 5.0 11.0 18.0 15.0 4500 1440 E4 R745I 1270--0--
3300 pF 4.0 10.0 18.0 15.0 4500 1440 E4 R745I 1330--3--
3300 pF 5.0 11.0 18.0 15.0 4500 1440 E4 R745I 1330--0--
3900 pF 4.0 10.0 18.0 15.0 4500 1440 E4 R745I 1390--3--
3900 pF 5.0 11.0 18.0 15.0 4500 1440 E4 R745I 1390--0--
4700 pF 4.0 10.0 18.0 15.0 4500 1440 E4 R745I 1470--3--
4700 pF 5.0 11.0 18.0 15.0 4500 1440 E4 R745I 1470--0--
5600 pF 5.0 11.0 18.0 15.0 4500 1440 E4 R745I 1560--0--
6800 pF 6.0 12.0 18.0 15.0 4500 1440 E4 R745I 1680--0--
8200 pF 6.0 12.0 18.0 15.0 4500 1440 E4 R745I 1820--0--
0.010 µF 6.0 12.0 18.0 15.0 4500 1440 E4 R745I 2100--0--
0.012 µF 7.5 13.5 18.0 15.0 4500 1440 E4 R745I 2120--0--
0.015 µF 7.5 13.5 18.0 15.0 4500 1440 E4 R745I 2150--0--
0.015 µF 13.0 12.0 18.0 15.0 4500 1440 E4 R745I 2150--6--
0.018 µF 8.5 14.5 18.0 15.0 4500 1440 E4 R745I 2180--0--
0.018 µF 13.0 12.0 18.0 15.0 4500 1440 E4 R745I 2180--6--
0.022 µF 10.0 16.0 18.0 15.0 4500 1440 E4 R745I 2220--0--
0.022 µF 13.0 12.0 18.0 15.0 4500 1440 E4 R745I 2220--6--
0.027 µF 10.0 16.0 18.0 15.0 4500 1440 E4 R745I 2270--0--
0.033 µF 11.0 19.0 18.0 15.0 4500 1440 E4 R745I 2330--0--
Rated
Cap.
500Vac (2 sections)
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2µs)
0.018 µF 6.0 15.0 26.5 22.5 1800 576 E4 R745N2180--0--
0.022 µF 6.0 15.0 26.5 22.5 1800 576 E4 R745N2220--0--
0.027 µF 7.0 16.0 26.5 22.5 1800 576 E4 R745N2270--0--
0.033 µF 7.0 16.0 26.5 22.5 1800 576 E4 R745N2330--0--
0.039 µF 8.5 17.0 26.5 22.5 1800 576 E4 R745N2390--0--
0.047 µF 10.0 18.5 26.5 22.5 1800 576 E4 R745N2470--0--
0.056 µF 10.0 18.5 26.5 22.5 1800 576 E4 R745N2560--0--
0.068 µF 11.0 20.0 26.5 22.5 1800 576 E4 R745N2680--0--
0.082 µF 13.0 22.0 26.5 22.5 1800 576 E4 R745N2820--0--
0.10 µF 13.0 22.0 26.5 22.5 1800 576 E4 R745N3100--0--
0.10 µF 9.0 17.0 32.0 27.5 500 160 E4 R745R3100--0--
0.12 µF 9.0 17.0 32.0 27.5 500 160 E4 R745R3120--0--
0.15 µF 9.0 17.0 32.0 27.5 500 160 E4 R745R3150--0--
0.18 µF 11.0 20.0 32.0 27.5 500 160 E4 R745R3180--0--
0.22 µF 11.0 20.0 32.0 27.5 500 160 E4 R745R3220--0--
0.27 µF 13.0 22.0 32.0 27.5 500 160 E4 R745R3270--0--
0.33 µF 14.0 28.0 32.0 27.5 500 160 E4 R745R3330--0--
0.39 µF 14.0 28.0 32.0 27.5 500 160 E4 R745R3390--0--
0.47 µF 14.0 28.0 32.0 27.5 500 160 E4 R745R3470--0--
0.56 µF 18.0 33.0 32.0 27.5 500 160 E4 R745R3560--0--
0.68 µF 18.0 33.0 32.0 27.5 500 160 E4 R745R3680--0--
0.82 µF 22.0 37.0 32.0 27.5 500 160 E4 R745R3820--0--
1.0 µF 22.0 37.0 32.0 27.5 500 160 E4 R745R4100--0--
0.33 µF 11.0 22.0 41.5 37.5 300 96 E4 R745W3330--0--
0.39 µF 11.0 22.0 41.5 37.5 300 96 E4 R745W3390--0--
0.47 µF 13.0 24.0 41.5 37.5 300 96 E4 R745W3470--0--
0.56 µF 13.0 24.0 41.5 37.5 300 96 E4 R745W3560--0--
0.68 µF 16.0 28.5 41.5 37.5 300 96 E4 R745W3680--0--
0.82 µF 16.0 28.5 41.5 37.5 300 96 E4 R745W3820--0--
1.0 µF 19.0 32.0 41.5 37.5 300 96 E4 R745W4100--0--
1.2 µF 19.0 32.0 41.5 37.5 300 96 E4 R745W4120--0--
1.5 µF 20.0 40.0 41.5 37.5 300 96 E4 R745W4150--0--
1.8 µF 24.0 44.0 41.5 37.5 300 96 E4 R745W4180--0--
2.2 µF 24.0 44.0 41.5 37.5 300 96 E4 R745W4220--0--
09/2008 92
R74
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
Note: If the working voltage (V) is lower than the rated voltage
(VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table.
The dv/dt test is carried out at 2 times the above
values.
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
All dimensions are in mm.
Rated
Cap.
700Vac (3 sections)
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
470 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R747I 0470--3--
680 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R747I 0680--3--
820 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R747I 0820--3--
1000 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R747I 1100--3--
1000 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R747I 1100--0--
1200 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R747I 1120--3--
1200 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R747I 1120--0--
1500 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R747I 1150--3--
1500 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R747I 1150--0--
1800 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R747I 1180--3--
1800 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R747I 1180--0--
2200 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R747I 1220--3--
2200 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R747I 1220--0--
2700 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R747I 1270--0--
3300 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R747I 1330--0--
3900 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R747I 1390--0--
4700 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R747I 1470--0--
5600 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R747I 1560--0--
6800 pF 7.5 13.5 18.0 15.0 9500 3800 E4 R747I 1680--0--
8200 pF 7.5 13.5 18.0 15.0 9500 3800 E4 R747I 1820--0--
8200 pF 9.0 12.5 18.0 15.0 9500 3800 E4 R747I 1820--6--
0.010 µF 8.5 14.5 18.0 15.0 9500 3800 E4 R747I 2100--0--
0.010 µF 13.0 12.0 18.0 15.0 9500 3800 E4 R747I 2100--6--
0.012 µF 10.0 16.0 18.0 15.0 9500 3800 E4 R747I 2120--0--
0.012 µF 13.0 12.0 18.0 15.0 9500 3800 E4 R747I 2120--6--
0.015 µF 10.0 16.0 18.0 15.0 9500 3800 E4 R747I 2150--0--
0.018 µF 11.0 19.0 18.0 15.0 9500 3800 E4 R747I 2180--0--
8200 pF 6.0 15.0 26.5 22.5 4500 1800 E4 R747N1820--0--
0.010 µF 6.0 15.0 26.5 22.5 4500 1800 E4 R747N2100--0--
0.012 µF 6.0 15.0 26.5 22.5 4500 1800 E4 R747N2120--0--
0.015 µF 6.0 15.0 26.5 22.5 4500 1800 E4 R747N2150--0--
0.018 µF 7.0 16.0 26.5 22.5 4500 1800 E4 R747N2180--0--
0.022 µF 8.5 17.0 26.5 22.5 4500 1800 E4 R747N2220--0--
0.027 µF 8.5 17.0 26.5 22.5 4500 1800 E4 R747N2270--0--
0.033 µF 10.0 18.5 26.5 22.5 4500 1800 E4 R747N2330--0--
0.039 µF 10.0 18.5 26.5 22.5 4500 1800 E4 R747N2390--0--
0.047 µF 11.0 20.0 26.5 22.5 4500 1800 E4 R747N2470--0--
0.056 µF 13.0 22.0 26.5 22.5 4500 1800 E4 R747N2560--0--
0.068 µF 13.0 22.0 26.5 22.5 4500 1800 E4 R747N2680--0--
0.039 µF 9.0 17.0 32.0 27.5 700 280 E4 R747R2390--0--
0.047 µF 9.0 17.0 32.0 27.5 700 280 E4 R747R2470--0--
0.056 µF 9.0 17.0 32.0 27.5 700 280 E4 R747R2560--0--
0.068 µF 11.0 20.0 32.0 27.5 700 280 E4 R747R2680--0--
0.082 µF 11.0 20.0 32.0 27.5 700 280 E4 R747R2820--0--
0.10 µF 13.0 22.0 32.0 27.5 700 280 E4 R747R3100--0--
0.12 µF 13.0 22.0 32.0 27.5 700 280 E4 R747R3120--0--
0.15 µF 14.0 28.0 32.0 27.5 700 280 E4 R747R3150--0--
0.18 µF 14.0 28.0 32.0 27.5 700 280 E4 R747R3180--0--
0.22 µF 18.0 33.0 32.0 27.5 700 280 E4 R747R3220--0--
0.27 µF 18.0 33.0 32.0 27.5 700 280 E4 R747R3270--0--
0.33 µF 22.0 37.0 32.0 27.5 700 280 E4 R747R3330--0--
0.15 µF 11.0 22.0 41.5 37.5 400 160 E4 R747W3150--0--
0.18 µF 13.0 24.0 41.5 37.5 400 160 E4 R747W3180--0--
0.22 µF 13.0 24.0 41.5 37.5 400 160 E4 R747W3220--0--
0.27 µF 16.0 28.5 41.5 37.5 400 160 E4 R747W3270--0--
0.33 µF 16.0 28.5 41.5 37.5 400 160 E4 R747W3330--0--
0.39 µF 19.0 32.0 41.5 37.5 400 160 E4 R747W3390--0--
0.47 µF 19.0 32.0 41.5 37.5 400 160 E4 R747W3470--0--
0.56 µF 20.0 40.0 41.5 37.5 400 160 E4 R747W3560--0--
0.68 µF 24.0 44.0 41.5 37.5 400 160 E4 R747W3680--0--
0.82 µF 24.0 44.0 41.5 37.5 400 160 E4 R747W3820--0--
1.0 µF 30.0 45.0 41.5 37.5 400 160 E4 R747W4100--0--
Rated
Cap.
900Vac (4 sections)
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
1000 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1100--0--
1200 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1120--0--
1500 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1150--0--
1800 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1180--0--
2200 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1220--0--
2700 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1270--0--
3300 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1330--0--
3900 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1390--0--
4700 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1470--0--
5600 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1560--0--
6800 pF 6.0 15.0 26.5 22.5 2500 1100 E4 R749N1680--0--
8200 pF 7.0 16.0 26.5 22.5 2500 1100 E4 R749N1820--0--
0.010 µF 7.0 16.0 26.5 22.5 2500 1100 E4 R749N2100--0--
0.012 µF 8.5 17.0 26.5 22.5 2500 1100 E4 R749N2120--0--
0.015 µF 10.0 18.5 26.5 22.5 2500 1100 E4 R749N2150--0--
0.018 µF 10.0 18.5 26.5 22.5 2500 1100 E4 R749N2180--0--
0.022 µF 11.0 20.0 26.5 22.5 2500 1100 E4 R749N2220--0--
0.027 µF 13.0 22.0 26.5 22.5 2500 1100 E4 R749N2270--0--
0.033 µF 13.0 22.0 26.5 22.5 2500 1100 E4 R749N2330--0--
0.022 µF 9.0 17.0 32.0 27.5 1500 660 E4 R749R2220--0--
0.027 µF 9.0 17.0 32.0 27.5 1500 660 E4 R749R2270--0--
0.033 µF 11.0 20.0 32.0 27.5 1500 660 E4 R749R2330--0--
0.039 µF 11.0 20.0 32.0 27.5 1500 660 E4 R749R2390--0--
0.047 µF 13.0 22.0 32.0 27.5 1500 660 E4 R749R2470--0--
0.056 µF 13.0 22.0 32.0 27.5 1500 660 E4 R749R2560--0--
0.068 µF 14.0 28.0 32.0 27.5 1500 660 E4 R749R2680--0--
0.082 µF 14.0 28.0 32.0 27.5 1500 660 E4 R749R2820--0--
0.10 µF 18.0 33.0 32.0 27.5 1500 660 E4 R749R3100--0--
0.12 µF 18.0 33.0 32.0 27.5 1500 660 E4 R749R3120--0--
0.15 µF 18.0 33.0 32.0 27.5 1500 660 E4 R749R3150--0--
0.068 µF 11.0 22.0 41.5 37.5 900 400 E4 R749W2680--0--
0.082 µF 11.0 22.0 41.5 37.5 900 400 E4 R749W2820--0--
0.10 µF 13.0 24.0 41.5 37.5 900 400 E4 R749W3100--0--
0.12 µF 13.0 24.0 41.5 37.5 900 400 E4 R749W3120--0--
0.15 µF 16.0 28.5 41.5 37.5 900 400 E4 R749W3150--0--
0.18 µF 16.0 28.5 41.5 37.5 900 400 E4 R749W3180--0--
0.22 µF 19.0 32.0 41.5 37.5 900 400 E4 R749W3220--0--
0.27 µF 20.0 40.0 41.5 37.5 900 400 E4 R749W3270--0--
0.33 µF 20.0 40.0 41.5 37.5 900 400 E4 R749W3330--0--
0.39 µF 24.0 44.0 41.5 37.5 900 400 E4 R749W3390--0--
0.47 µF 24.0 44.0 41.5 37.5 900 400 E4 R749W3470--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
3 sections
(700Vac)
single sided metallized
polypropylene lm
single sided metallized
polypropylene lm
4 sections
(900Vac)
09/2008
93
R74
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
250Vac ( 630Vdc) - 400Vac (1300Vdc)
500Vac (1600Vdc) - 700Vac (2000Vdc)
900Vac (2200Vdc)
Rated temperature (TR): +85°C
Temperature derated voltage:
for temperatures between +85°C and +105°C a decreasing
factor of 1.25% per degree °C on the rated voltage VR
(a.c. and d.c.) has to be applied.
Capacitance range:
470pF to 3.3 µF
Capacitance values:
E12 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K).
Total self inductance: (L)
(Lead length (2 mm)
Pitch (mm) 10 15 22.5 27.5 37.5
L (nH) ≈ 9 10 18 18 20
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C
1kHz 10kHz 100kHz
C ≤2.2nF ≤ 1.0 ≤ 2.0 ≤ 3.0
2.2nF < C ≤ 0.027µF ≤ 1.0 ≤ 2.0 ≤ 8.0
0.027µF < C ≤ 0.1µF ≤ 4.0 ≤ 6.0 ≤ 25.0
0.1µF < C ≤ 1µF ≤ 5.0 ≤ 8.0
C >1µF ≤ 6.0
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100Vdc
Performance
≥1x105 MΩ for C≤0.33µF
≥30000s for C>0.33µF
Test voltage between terminations:
1.6xVR applied for 2 s at 25°C±5°C
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤10x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C±2°C
Test duration: 2000 h
Voltage applied: 1.25xVR (a.c.) at 50Hz
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ): ≤15x10-4 at 10kHz
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: 260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change|∆C/C|: ≤1%
DF change (∆tgδ): ≤10x10-4 at 10kHz
Insulation resistance: ≥initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (page 12).
Performance
Capacitance change |∆C/C|: ≤0.5%
09/2008 94
R74
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 85°C)
Note: p (pitch) in mm.
09/2008
95
R74
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 85°C)
Note: p (pitch) in mm.
09/2008 96
Ød ±0.05 p = 10 p = 15
0.6 0.8
All dimensions are in mm.
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
R 7 4 7 R -
Digit 1 to 3 Series code.
Digit 4 a.c. rated voltage:
6 = 600V
Digit 5 Pitch: F=10.0mm; I =15.0mm.
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use.
Digit 14 Capacitance tolerance:
J=5%; K=10%
R74 MINIVERSION
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
Typical applications: electronic lighting (i.e. car headlamp
and ballast), pulse applications with high A.C. voltage and
high current.
PRODUCT CODE: R74
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame
retardant according to UL94 V-0.
Marking: manufacturer’s logo, series (R74), dielectric
code (MKP), capacitance, tolerance, A.C. rated
voltage, manufacturing date code.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-16; IEC 60384-17
Loose
Fig.1
Taped
Fig.2
Typical application: LAMP CAPACITOR IN ELECTRONIC BALLAST
Table 1 (for more detailed information, please refer to page 14)
Standard packaging
style
Lead length Taping style Ordering code
(mm)
P2
(mm)
Fig.
(No.)
Pitch
(mm) (Digit 10 to 11)
AMMO-PACK 12.70 1 10.0/15.0 DQ
AMMO-PACK
AMMO-PACK Kinked execution from p=15 mm to p=7.5 mm KN
KL
REEL Ø 355mm 12.70 1 10.0/15.0 GY
REEL Ø 500mm 12.70 1 10.0/15.0 CK
Loose, short leads 4 +2 AA
Loose, long leads
(p=10mm) 17 -2/+1 JM
Loose, long leads
(p≥15mm)
30 +5
25 -1/+2
40
50
Note: Ammo-pack is the preferred packaging for taped version.
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
09/2008
97
R74 MINIVERSION
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
Note: If the working voltage (V) is lower than the rated voltage
(VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table.
The dv/dt test is carried out at 2 times the above
values.
All dimensions are in mm.
Rated
Cap.
600Vac (3 sections)
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
470 pF 4.0 9.0 13.0 10.0 10000 4000 E4 R746F 0470--0--
680 pF 4.0 9.0 13.0 10.0 10000 4000 E4 R746F 0680--0--
820 pF 4.0 9.0 13.0 10.0 10000 4000 E4 R746F 0820--0--
1000 pF 4.0 9.0 13.0 10.0 10000 4000 E4 R746F 1100--0--
1200 pF 4.0 9.0 13.0 10.0 10000 4000 E4 R746F 1120--0--
1500 pF 4.0 9.0 13.0 10.0 10000 4000 E4 R746F 1150--0--
1800 pF 4.0 9.0 13.0 10.0 10000 4000 E4 R746F 1180--0--
2200 pF 5.0 11.0 13.0 10.0 10000 4000 E4 R746F 1220--0--
2700 pF 5.0 11.0 13.0 10.0 10000 4000 E4 R746F 1270--0--
3300 pF 6.0 12.0 13.0 10.0 10000 4000 E4 R746F 1330--0--
3900 pF 6.0 12.0 13.0 10.0 10000 4000 E4 R746F 1390--0--
2300 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R746I 1230--0--
2700 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R746I 1270--0--
3900 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R746I 1390--0--
4700 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R746I 1470--0--
6800 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R746I 1680--0--
0.012 µF 8.5 14.5 18.0 15.0 9500 3800 E4 R746I 2120--0--
0.015 µF 8.5 14.5 18.0 15.0 9500 3800 E4 R746I 2150--0--
0.018 µF 10.0 16.0 18.0 15.0 9500 3800 E4 R746I 2180--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
3 sections
(700Vac)
single sided metallized
polypropylene lm
09/2008 98
R74 MINIVERSION
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
600Vac (2000Vdc)
Rated temperature (TR): +85°C
Temperature derated voltage:
for temperatures between +85°C and +105°C a decreasing
factor of 1.25% per degree °C on the rated voltage VR
(a.c. and d.c.) has to be applied.
Capacitance range:
470pF to 0.018µF
Capacitance values:
E12 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K).
Total self inductance: (L)
(Lead length (2 mm)
Pitch (mm) 10 15
L (nH) ≈ 9 10
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C
1kHz 100kHz
All ≤ 15 ≤ 15
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100Vdc
Performance
≥1x105 MΩ
Test voltage between terminations:
1.6xVR applied for 2 s at 25°C±5°C
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤10x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C±2°C
Test duration: 2000 h
Voltage applied: VR (a.c.) at 50Hz
Performance
Capacitance change |∆C/C|: ≤10%
DF change (∆tgδ): ≤15x10-4 at 10kHz
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: 260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change|∆C/C|: ≤1%
DF change (∆tgδ): ≤10x10-4 at 10kHz
Insulation resistance: ≥initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (page 12).
Performance
Capacitance change |∆C/C|: ≤1%
09/2008
99
R74 MINIVERSION
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 85°C)
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 85°C)
09/2008 100
Ød ±0.05 p = 10 p ≥15
0.6 0.8
All dimensions are in mm.
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
R 7 4 H -
Digit 1 to 3 Series code.
Digit 4 a.c. rated voltage:
5 = 500V 7 = 700V
Digit 5 Pitch: F=10.0mm; I =15.0mm; N=22.5mm;
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits
of Capacitance value and the 6th digit
indicates the number of zeros that must
be added to obtain the Rated Capacitance in
pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use.
Digit 14 Capacitance tolerance:
J=5%; K=10%
R74 125°C
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
Typical applications: electronic lighting (i.e. car headlamp
and ballast), pulse applications with high A.C. voltage and
high current.
PRODUCT CODE: R74
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame
retardant according to UL94 V0.
Marking: manufacturer’s logo, series (R74), dielectric
code (MKP), capacitance, tolerance, A.C. rated
voltage, manufacturing date code.
Climatic category: 55/125/56 IEC 60068-1
Operating temperature range: -55 to +125°C
Related documents: IEC 60384-16; IEC 60384-17
Loose
Fig.1
Taped
Fig.2
Typical application: LAMP CAPACITOR IN ELECTRONIC BALLAST
Standard packaging
style
Lead length Taping style Ordering code
(mm)
P2
(mm)
Fig.
(No.)
Pitch
(mm) (Digit 10 to 11)
AMMO-PACK 12.70 1 10.0/15.0 DQ
AMMO-PACK 19.05 2 22.5 DQ
AMMO-PACK
AMMO-PACK Kinked execution from p=15 mm to p=7.5 mm KN
KL
REEL Ø 355mm 12.70 1 10.0/15.0 GY
REEL Ø 500mm 12.70 1 10.0/15.0 CK
REEL Ø 500mm 19.05 2 22.5 CK
Loose, short leads 4 +2 AA
Loose, long leads
(p=10mm) 17 +1/-2 JM
Loose, long leads
(p≥15mm)
30 +5
25 +2/-1
40
50
Note: Ammo-pack is the preferred packaging for taped version.
Table 1 (for more detailed information, please refer to page 14)
Pitch Box thickness Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
09/2008
101
R74 125°C
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
Note: If the working voltage (V) is lower than the rated voltage (VR),
the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the ratio
VR /V.
The pulse characteristic K0 depends on the voltage wave-
form and in any case it cannot overcome the value given in
the above table.
The dv/dt test is carried out at 2 times the above values.
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
single sided metallized
polypropylene lm
3 sections
(700Vac)
2 sections
(500Vac)
single sided metallized
polypropylene lm
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
All dimensions are in mm
Rated
Cap.
500Vac (2 sections)
Std dimensions
Max
dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
1000 pF 4.0 9.0 13.0 10.0 6000 1.28 E7 R745F 1100--H0-
1200 pF 4.0 9.0 13.0 10.0 6000 1.28 E7 R745F 1120--H0-
1500 pF 4.0 9.0 13.0 10.0 6000 1.28 E7 R745F 1150--H0-
1800 pF 5.0 11.0 13.0 10.0 6000 1.28 E7 R745F 1180--H0-
2200 pF 5.0 11.0 13.0 10.0 6000 1.28 E7 R745F 1220--H0-
2700 pF 5.0 11.0 13.0 10.0 6000 1.28 E7 R745F 1270--H0-
3300 pF 6.0 12.0 13.0 10.0 6000 1.28 E7 R745F 1330--H0-
3900 pF 6.0 12.0 13.0 10.0 6000 1.28 E7 R745F 1390--H0-
2700 pF 4.0 10.0 18.0 15.0 4500 8.00 E6 R745I 1270--H3-
3300 pF 4.0 10.0 18.0 15.0 4500 8.00 E6 R745I 1330--H3-
3900 pF 4.0 10.0 18.0 15.0 4500 8.00 E6 R745I 1390--H3-
4700 pF 5.0 11.0 18.0 15.0 4500 8.00 E6 R745I 1470--H0-
5600 pF 5.0 11.0 18.0 15.0 4500 8.00 E6 R745I 1560--H0-
6800 pF 6.0 12.0 18.0 15.0 4500 8.00 E6 R745I 1680--H0-
8200 pF 6.0 12.0 18.0 15.0 4500 8.00 E6 R745I 1820--H0-
0.010 µF 6.0 12.0 18.0 15.0 4500 8.00 E6 R745I 2100--H0-
0.012 µF 7.5 13.5 18.0 15.0 4500 8.00 E6 R745I 2120--H0-
0.015 µF 7.5 13.5 18.0 15.0 4500 8.00 E6 R745I 2150--H0-
0.015 µF 13.0 12.0 18.0 15.0 4500 8.00 E6 R745I 2150--H1-
0.018 µF 8.5 14.5 18.0 15.0 4500 8.00 E6 R745I 2180--H0-
0.018 µF 13.0 12.0 18.0 15.0 4500 8.00 E6 R745I 2180--H1-
0.022 µF 10.0 16.0 18.0 15.0 4500 8.00 E6 R745I 2220--H0-
0.022 µF 13.0 12.0 18.0 15.0 4500 8.00 E6 R745I 2220--H1-
0.027 µF 10.0 16.0 18.0 15.0 4500 8.00 E6 R745I 2270--H0-
0.033 µF 11.0 19.0 18.0 15.0 4500 8.00 E6 R745I 2330--H0-
0.018 µF 6.0 15.0 26.5 22.5 1200 3.84 E6 R745N2180--H0-
0.022 µF 6.0 15.0 26.5 22.5 1200 3.84 E4 R745N2220--H0-
0.027 µF 7.0 16.0 26.5 22.5 1200 3.84 E4 R745N2270--H0-
0.033 µF 7.0 16.0 26.5 22.5 1200 3.84 E4 R745N2330--H0-
0.039 µF 8.5 17.0 26.5 22.5 1200 3.84 E4 R745N2390--H0-
0.047 µF 10.0 18.5 26.5 22.5 1200 3.84 E4 R745N2470--H0-
0.056 µF 10.0 18.5 26.5 22.5 1200 3.84 E4 R745N2560--H0-
0.068 µF 11.0 20.0 26.5 22.5 1200 3.84 E4 R745N2680--H0-
0.082 µF 13.0 22.0 26.5 22.5 1200 3.84 E4 R745N2820--H0-
0.10 µF 13.0 22.0 26.5 22.5 1200 3.84 E4 R745N3100--H0-
Rated
Cap.
700Vac (3 sections)
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
680 pF 4.0 10.0 18.0 15.0 9500 960 E4 R747I0680--H3-
820 pF 4.0 10.0 18.0 15.0 9500 960 E4 R747I0820--H3-
1000 pF 4.0 10.0 18.0 15.0 9500 960 E4 R747I1100--H3-
1200 pF 4.0 10.0 18.0 15.0 9500 960 E4 R747I1120--H3-
1300 pF 4.0 10.0 18.0 15.0 9500 960 E4 R747I1130--H3-
1800 pF 4.0 10.0 18.0 15.0 9500 960 E4 R747I1180--H3-
2200 pF 4.0 10.0 18.0 15.0 9500 960 E4 R747I1220--H3-
2500 pF 4.0 10.0 18.0 15.0 9500 960 E4 R747I1250--H3-
2700 pF 5.0 11.0 18.0 15.0 9500 960 E4 R747I1270--H0-
3300 pF 5.0 11.0 18.0 15.0 9500 960 E4 R747I1330--H0-
3600 pF 6.0 12.0 18.0 15.0 9500 960 E4 R747I1360--H0-
3900 pF 6.0 12.0 18.0 15.0 9500 960 E4 R747I1390--H0-
4300 pF 6.0 12.0 18.0 15.0 9500 960 E4 R747I1430--H0-
4700 pF 6.0 12.0 18.0 15.0 9500 960 E4 R747I1470--H0-
5200 pF 6.0 12.0 18.0 15.0 9500 960 E4 R747I1520--H0-
5600 pF 6.0 12.0 18.0 15.0 9500 960 E4 R747I1560--H0-
6200 pF 7.5 13.5 18.0 15.0 9500 960 E4 R747I1620--H0-
6800 pF 7.5 13.5 18.0 15.0 9500 960 E4 R747I1680--H0-
8200 pF 7.5 13.5 18.0 15.0 9500 960 E4 R747I1820--H0-
8200 pF 9.0 12.5 18.0 15.0 9500 960 E4 R747I1820--H1-
0.010 µF 8.5 14.5 18.0 15.0 9500 960 E4 R747I2100--H0-
0.010 µF 13.0 12.0 18.0 15.0 9500 960 E4 R747I2100--H1-
0.012 µF 10.0 16.0 18.0 15.0 9500 960 E4 R747I2120--H0-
0.012 µF 13.0 12.0 18.0 15.0 9500 960 E4 R747I2120--H1-
0.015 µF 10.0 16.0 18.0 15.0 9500 960 E4 R747I2150--H0-
0.018 µF 11.0 19.0 18.0 15.0 9500 960 E4 R747I2180--H0-
6200 pF 6.0 15.0 26.5 22.5 4500 420 E4 R747N1620--H0-
6800 pF 6.0 15.0 26.5 22.5 4500 420 E4 R747N1680--H0-
7500 pF 6.0 15.0 26.5 22.5 4500 420 E4 R747N1750--H0-
8200 pF 6.0 15.0 26.5 22.5 4500 420 E4 R747N1820--H0-
0.010 µF 6.0 15.0 26.5 22.5 4500 420 E4 R747N2100--H0-
0.012 µF 6.0 15.0 26.5 22.5 4500 420 E4 R747N2120--H0-
0.015 µF 6.0 15.0 26.5 22.5 4500 420 E4 R747N2150--H0-
0.018 µF 7.0 16.0 26.5 22.5 4500 420 E4 R747N2180--H0-
0.022 µF 8.5 17.0 26.5 22.5 4500 420 E4 R747N2220--H0-
0.027 µF 8.5 17.0 26.5 22.5 4500 420 E4 R747N2270--H0-
0.033 µF 10.0 18.5 26.5 22.5 4500 420 E4 R747N2330--H0-
0.039 µF 10.0 18.5 26.5 22.5 4500 420 E4 R747N2390--H0-
0.047 µF 11.0 20.0 26.5 22.5 4500 420 E4 R747N2470--H0-
0.056 µF 13.0 22.0 26.5 22.5 4500 420 E4 R747N2560--H0-
0.062 µF 13.0 22.0 26.5 22.5 4500 420 E4 R747N2620--H0-
0.068 µF 13.0 22.0 26.5 22.5 4500 420 E4 R747N2680--H0-
09/2008 102
R74 125°C
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
500Vac (1600Vdc) - 700Vac (2000Vdc)
Rated temperature (TR): +105°C
Temperature derated voltage:
for temperatures between +105°C and +125°C a decreasing
factor of 1.25% per degree °C on the rated voltage
VR (a.c. and d.c.) has to be applied.
Capacitance range:
680pF to 0.1 µF
Capacitance values:
E12 series (IEC 60063 Norm) mainly.
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K).
Total self inductance: (L)
(Lead length (2 mm)
Pitch (mm) 10 15 22.5
L (nH) ≈ 9 10 18
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C
1kHz 10kHz 100kHz
C ≤2.2nF ≤ 1.0 ≤ 2.0 ≤ 3.0
2.2nF < C ≤ 0.027µF ≤ 1.0 ≤ 2.0 ≤ 8.0
0.027µF < C ≤ 0.1µF ≤ 4.0 ≤ 6.0 ≤ 25.0
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100Vdc
Performance
≥1x105 MΩ for C≤0.33µF
Test voltage between terminations:
1.6xVR applied for 2 s at 25°C±5°C
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤10x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions 1
Temperature: +125°C +0/-2°C
Test duration: 2000 h
Voltage applied: 0.94 x VR (a.c.) at 50Hz
Test conditions 2
Temperature: +105°C ±2°C
Test duration: 2000 h
Voltage applied: 1.25 x VR (a.c.) at 50Hz
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ): ≤15x10-4 at 10kHz
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions 1
Solder bath temperature: 260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change|∆C/C|: ≤1%
DF change (∆tgδ): ≤10x10-4 at 10kHz
Insulation resistance: ≥initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (page 12).
Performance
Capacitance change |∆C/C|: ≤0.5%
09/2008
103
R74 125°C
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 85°C)
Note: p (pitch) in mm.
09/2008 104
R74 125°C
MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
A.C. APPLICATIONS
PRODUCT CODE: R74
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 85°C)
Note: p (pitch) in mm.