MOC205M, MOC206M, MOC207M, MOC211M, MOC212M, MOC213M, MOC216M, MOC217M 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Features Description * Closely Matched Current Transfer Ratios * Minimum BVCEO of 70 V Guaranteed - MOC205M, MOC206M, MOC207M * Minimum BVCEO of 30 V Guaranteed - MOC211M, MOC212M, MOC213M, MOC216M, MOC217M * Low LED Input Current Required for Easier Logic Interfacing - MOC216M, MOC217M * Convenient Plastic SOIC-8 Surface Mountable Package Style, with 0.050" Lead Spacing * Safety and Regulatory Approvals: - UL1577, 2,500 VACRMS for 1 Minute - DIN-EN/IEC60747-5-5, 565 V Peak Working Insulation Voltage These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic package. They are ideally suited for high-density applications, and eliminate the need for through-the-board mounting. Applications * Feedback Control Circuits * Interfacing and Coupling Systems of Different Potentials and Impedances * General Purpose Switching Circuits * Monitor and Detection Circuits Schematic Package Outline ANODE 1 8 N/C CATHODE 2 7 BASE Figure 2. Package Outline N/C 3 6 COLLECTOR N/C 4 5 EMITTER Figure 1. Schematic (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler August 2015 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Characteristics I-IV < 150 VRMS Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage I-III < 300 VRMS Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Comparative Tracking Index Symbol 175 Value Unit Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 904 Vpeak Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1060 Vpeak VIORM Maximum Working Insulation Voltage 565 Vpeak VIOTM Highest Allowable Over-Voltage VPR DTI TS IS,INPUT Parameter 4000 Vpeak External Creepage 4 mm External Clearance 4 mm 0.4 mm Distance Through Insulation (Insulation Thickness) Case Temperature(1) Input Current(1) PS,OUTPUT Output Power(1) RIO Insulation Resistance at TS, VIO = 500 V(1) 150 C 200 mA 300 mW > 109 Note: 1. Safety limit values - maximum values allowed in the event of a failure. (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 2 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25C unless otherwise specified. Symbol Rating Value Unit Storage Temperature -40 to +125 C TA Ambient Operating Temperature -40 to +100 C TJ Junction Temperature TOTAL DEVICE TSTG TSOL PD -40 to +125 C 260 for 10 seconds C Total Device Power Dissipation @ TA = 25C 240 mW Derate above 25C 2.94 mW/C Continuous Forward Current 60 mA Forward Current - Peak (PW = 100 s, 120 pps) 1.0 A Reverse Voltage 6.0 V Lead Solder Temperature EMITTER IF IF (pk) VR LED Power Dissipation @ TA = 25C 90 mW Derate above 25C 0.8 mW/C Continuous Collector Current 150 mA VCEO Collector-Emitter Voltage 30 V VECO Emitter-Collector Voltage 7 V Detector Power Dissipation @ TA = 25C 150 mW Derate above 25C 1.76 mW/C PD DETECTOR IC PD (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 3 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Absolute Maximum Ratings TA = 25C unless otherwise specified. Symbol Parameter Test Conditions Min. Typ. Max. Unit EMITTER Input Forward Voltage VF IR CIN MOC216M, MOC217M IF = 1 mA 1.07 1.3 V MOC205M, MOC206M, MOC207M MOC211M, MOC212M, MOC213M IF = 10 mA 1.15 1.5 V VR = 6 V 0.001 100 A Reverse Leakage Current Input Capacitance 18 pF DETECTOR ICEO1 ICEO2 Collector-Emitter Dark Current VCE = 10 V, TA = 25C 1.0 50 nA VCE = 10 V, TA = 100C 1.0 A Collector-Emitter Breakdown Voltage BVCEO MOC205M, MOC206M, MOC207M IC = 100 A 70 100 V MOC211M, MOC212M, MOC213M, MOC216M, MOC217M IC = 100 A 30 100 V BVCBO Collector-Base Breakdown Voltage IC = 10 A 70 120 V BVECO Emitter-Collector Breakdown Voltage IE = 100 A 7 10 V Collector-Emitter Capacitance f = 1.0 MHz, VCE = 0 7 pF CCE COUPLED Collector-Output Current CTR MOC205M IF = 10 mA, VCE = 10 V 40 80 % MOC206M IF = 10 mA, VCE = 10 V 63 125 % MOC207M IF = 10 mA, VCE = 10 V 100 200 % MOC211M IF = 10 mA, VCE = 10 V 20 % MOC212M IF = 10 mA, VCE = 10 V 50 % MOC213M IF = 10 mA, VCE = 10 V 100 % MOC216M IF = 1 mA, VCE = 5 V 50 % MOC217M IF = 1 mA, VCE = 5 V 100 % Collector-Emitter Saturation Voltage VCE(SAT) MOC205M, MOC206M, MOC207M MOC211M, MOC212M, MOC213M IC = 2 mA, IF = 10 mA 0.4 V MOC216M, MOC217M IC = 100 A, IF = 1 mA 0.4 V ton Turn-On Time IC = 2 mA, VCC = 10 V, RL = 100 (Figure 12) 7.5 s toff Turn-Off Time IC = 2 mA, VCC = 10 V, RL = 100 (Figure 12) 5.7 s tr Rise Time IC = 2 mA, VCC = 10 V, RL = 100 (Figure 12) 3.2 s tf Fall Time IC = 2 mA, VCC = 10 V, RL = 100 (Figure 12) 4.7 s (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 4 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Electrical Characteristics Symbol Characteristic Test Conditions VISO Input-Output Isolation Voltage t = 1 Minute CISO Isolation Capacitance VI-O = 0 V, f = 1 MHz RISO Isolation Resistance VI-O = 500 VDC, TA = 25C (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 Min. Typ. 2500 Unit VACRMS 0.2 1011 Max. pF www.fairchildsemi.com 5 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Isolation Characteristics 1.8 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 1.7 VF - FORWARD VOLTAGE (V) 1.6 1.5 1.4 TA = -55C 1.3 1.2 TA = 25C 1.1 TA = 100C 1.0 1 10 100 VCE = 5 V NORMALIZED TO IF = 10 mA 1 0.1 IF - LED FORWARD CURRENT (mA) 0.01 Figure 3. LED Forward Voltage vs. Forward Current 0.1 1 10 100 IF - LED INPUT CURRENT (mA) Figure 4. Output Curent vs. Input Current 1.6 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 1 NORMALIZED TO TA = 25C 0.1 -80 -60 -40 -20 0 20 40 60 80 100 1.4 1.2 1.0 0.8 0.6 0.4 0.2 I F = 10 mA NORMALIZED TO VCE = 5 V 0.0 0 120 1 2 3 4 5 6 7 8 9 10 VCE - COLLECTOR-EMITTER VOLTAGE (V) TA - AMBIENT TEMPERATURE (C) Figure 5. Output Current vs. Ambient Temperature Figure 6. Output Current vs. Collector-Emitter Voltage 10000 0.9 VCE = 10 V 1000 IF = 20 mA 0.8 0.7 100 NORMALIZED CTR I CEO - COLLECTOR -EMITTER DARK CURRENT (nA) 1.0 10 IF = 10 m A 0.6 0.5 IF = 5 mA 0.4 0.3 0.2 1 VCE = 5 V, TA = 25C Normalized to: CTR at RBE = Open 0.1 0.0 0.1 10 0 20 40 60 80 1000 RBE - BASE RESISTANCE (k) TA - AMBIENT TEMPERATURE (C) Figure 8. CTR vs. RBE (Unsaturated) Figure 7. Dark Current vs. Ambient Temperature (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 100 100 www.fairchildsemi.com 6 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Typical Performance Curves 1.0 4.0 0.9 3.5 0.8 3.0 0.7 NORMALIZED ton NORMALIZED CTR IF = 20 mA IF = 10 m A 0.6 0.5 IF = 5 mA 0.4 0.3 VCC = 10 V IC = 2 mA RL = 100 NORMALIZED TO : ton AT RBE = OPEN 2.5 2.0 1.5 1.0 0.2 VCE = 0.3 V, TA = 25C Normalized to: CTR at RBE = Open 0.1 0.0 10 0.5 100 0.0 0.01 1000 0.1 RBE - BASE RESISTANCE (k) 1 10 100 RBE - BASE RESISTANCE (M) Figure 9. CTR vs. RBE (Saturated) Figure 10. Normalized ton vs. RBE 1.6 VCC = 10 V IC = 2 mA 1.4 RL = 100 NORMALIZED TO : tofff AT RBE = OPEN NORMALIZED tofff 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.01 0.1 1 10 100 RBE - BASE RESISTANCE (M) Figure 11. Normalized toff vs. RBE TEST CIRCUIT WAVEFORMS VCC = 10 V INPUT PULSE IC IF INPUT RL 10% OUTPUT OUTPUT PULSE 90% RBE tr ton tf toff Adjust IF to produce IC = 2 mA Figure 12. Switching Time Test Circuit and Waveforms (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 7 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Typical Performance Curves (Continued) MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 240 120 360 Time 25C to Peak Time (seconds) Figure 13. Reflow Profile Profile Freature Pb-Free Assembly Profile Temperature Minimum (Tsmin) 150C Temperature Maximum (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second maximum Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second maximum Time 25C to Peak Temperature (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 8 minutes maximum www.fairchildsemi.com 8 Part Number Package Packing Method MOC205M Small Outline 8-Pin Tube (100 Units) MOC205R2M Small Outline 8-Pin Tape and Reel (2500 Units) MOC205VM Small Outline 8-Pin, DIN EN/IEC60747-5-5 Option Tube (100 Units) MOC205R2VM Small Outline 8-Pin, DIN EN/IEC60747-5-5 Option Tape and Reel (2500 Units) Note: 2. The product orderable part number system listed in this table also applies to the MOC20XM and MOC21XM products. Marking Information 1 205 V X YY S 3 4 2 6 5 Figure 14. Top Mark Table 1. Top Mark Definitions 1 Fairchild Logo 2 Device Number 3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 One-Digit Year Code, e.g., "4" 5 Digit Work Week, Ranging from "01" to "53" 6 Assembly Package Code (c)2005 Fairchild Semiconductor Corporation MOC20xM, MOC21xM Rev. 1.5 www.fairchildsemi.com 9 MOC20xM, MOC21xM -- 8-pin SOIC Single-Channel Phototransistor Output Optocoupler Ordering Information(2) TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid(R) MTi(R) MTx(R) MVN(R) mWSaver(R) OptoHiT OPTOLOGIC(R) AccuPower AttitudeEngineTM Awinda(R) AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FastvCore FETBench FPS OPTOPLANAR(R) (R) Power Supply WebDesigner PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R)* TinyBoost(R) TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM XsensTM (R) * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. AUTHORIZED USE Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive or other transportation, (2) military/aerospace, (3) any safety critical application - including life critical medical equipment - where the failure of the Fairchild product reasonably would be expected to result in personal injury, death or property damage. Customer's use of this product is subject to agreement of this Authorized Use policy. In the event of an unauthorized use of Fairchild's product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be subject to Fairchild's Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Terms of Use Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I77 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com