STB11NM80, STF11NM80 STI11NM80, STP11NM80, STW11NM80 N-channel 800 V, 0.35 , 11 A MDmeshTM Power MOSFET in DPAK, TO-220FP, IPAK, TO-220, TO-247 Features Order codes VDSS RDS(on) max RDS(on)*Qg ID 3 3 1 STB11NM80 1 DPAK STF11NM80 STI11NM80 800 V < 0.40 14*nC 2 TO-220FP 11 A STP11NM80 STW11NM80 Low input capacitance and gate charge Low gate input resistance Best RDS(on)*Qg in the industry IPAK Applications 3 3 12 Figure 1. 1 TO-220 2 2 3 1 TO-247 Internal schematic diagram Switching applications $ Description These N-channel Power MOSFETs are developed using STMicroelectronics' revolutionary MDmeshTM technology, which associates the multiple drain process with the company's PowerMESHTM horizontal layout. These devices offer extremely low on-resistance, high dv/dt and excellent avalanche characteristics. Utilizing ST's proprietary strip technique, these Power MOSFETs boast an overall dynamic performance which is superior to similar products on the market. Table 1. ' 3 !-V Device summary Order codes Marking Package Packaging STB11NM80 B11NM80 DPAK Tape and reel STF11NM80 F11NM80 TO-220FP STI11NM80 I11NM80 IPAK STP11NM80 P11NM80 TO-220 STW11NM80 W11NM80 TO-247 Tube September 2011 Doc ID 9241 Rev 11 1/22 www.st.com 22 Contents STB/F/I/P/W11NM80 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2/22 .............................................. 9 Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit DPAK, IPAK TO-220, TO-247 VDS Drain-source voltage (VGS = 0) 800 VGS Gate-source voltage 30 TO-220FP V V (1) ID Drain current (continuous) at TC = 25 C 11 11 ID Drain current (continuous) at TC=100 C 8 8 (1) IDM (2) PTOT VISO TJ Tstg 44 (1) A A Drain current (pulsed) 44 Total dissipation at TC = 25 C 150 35 W Derating factor 1.2 0.28 W/C 2500 V Insulation withstand voltage (DC) Operating junction temperature Storage temperature -65 to 150 A C 1. Limited only by the maximum temperature allowed 2. Pulse width limited by safe operating area Table 3. Thermal data Value Symbol Parameter Unit DPAK TO-220FP IPAK TO-220 TO-247 Rthj-case Rthj-a Rthj-pcb(1) Tl Thermal resistance junction-case max 0.83 Thermal resistance junctionambient max Thermal resistance junction-pcb max 3.6 0.83 62.5 50 30 Maximum lead temperature for soldering purpose C/W C/W C/W 300 C 1. When mounted on 1inch FR-4 board, 2 oz Cu Table 4. Symbol Avalanche characteristics Parameter Value Unit IAS Avalanche current, repetitive or notrepetitive (pulse width limited by Tj max) 2.5 A EAS Single pulse avalanche energy (starting Tj = 25 C, ID = IAR, VDD = 50 V) 400 mJ Doc ID 9241 Rev 11 3/22 Electrical characteristics 2 STB/F/I/P/W11NM80 Electrical characteristics (TCASE= 25 C unless otherwise specified) Table 5. Symbol On/off states Parameter Test conditions Min. Typ. Max. Unit V(BR)DSS Drain-source breakdown voltage (VGS = 0) ID = 250 A dv/dt (1) Drain source voltage slope VDD = 640 V, ID = 11 A, VGS = 10 V IDSS Zero gate voltage drain current (VGS = 0) VDS = 800 V, VDS = 800 V @125C 10 100 A A IGSS Gate body leakage current (VDS = 0) VGS = 30 V 100 nA VGS(th) Gate threshold voltage VDS= VGS, ID = 250 A 4 5 V RDS(on) Static drain-source on resistance VGS= 10 V, ID= 5.5 A 0.35 0.40 Min. Typ. Max. Unit 800 V 30 3 V/ns 1. Characteristic value at turn off on inductive load Table 6. Symbol Dynamic Parameter Test conditions gfs (1) Forward transconductance VDS > ID(on) x RDS(on)max, ID= 7.5 A - 8 - S Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS =25 V, f=1 MHz, VGS=0 - 1630 750 30 - pF pF pF Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD=640 V, ID = 11 A VGS =10 V (see Figure 18) - 43.6 11.6 21 - nC nC nC Rg Gate input resistance f=1MHz Gate DC Bias=0 Test signal level=20 mV open drain - 2.7 - Turn-on delay time Rise time Turn-off delay time Fall time VDD=400 V, ID= 5.5 A, RG=4.7 , VGS=10 V (see Figure 17) - 22 17 46 15 - ns ns ns ns td(on) tr td(off) tf 1. Pulsed: pulse duration=300s, duty cycle 1.5% 4/22 Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 Table 7. Symbol ISD Electrical characteristics Source drain diode Parameter Test conditions Min. Typ. Source-drain current Max. Unit 11 A 44 A 0.86 V - ISDM(1) Source-drain current (pulsed) VSD(2) Forward on voltage ISD=11 A, VGS=0 - Reverse recovery time Reverse recovery charge Reverse recovery current ISD=11 A, di/dt = 100 A/s, VDD= 50 V - 612 7.22 23.6 ns C A Reverse recovery time Reverse recovery charge Reverse recovery current ISD=11 A, di/dt = 100 A/s, VDD= 50 V, Tj=150 C - 970 11.25 23.2 ns C A trr Qrr IRRM trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5% Doc ID 9241 Rev 11 5/22 Electrical characteristics STB/F/I/P/W11NM80 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for DPAK, IPAK, TO-220, TO-247 Figure 3. Thermal impedance for DPAK, IPAK, TO-220, TO-247 Figure 5. Thermal impedance for TO-220FP Figure 7. Output characteristics @ TJ=150 C AM03328v1 ID (A) n) (o 10s 100s DS Op Lim era ite tion d by in th m is ax ar R e a is 1s 10 1 1ms Tj=150C Tc=25C 10ms Sinlge pulse 0.1 0.1 1 10 100 VDS(V) Figure 4. Safe operating area for TO-220FP ID (A) AM03329v1 10 1 1s is ea ) ar S(on is D th R in ax n io y m t b ra pe ed O imit L 10s 100s 1ms 10ms Tj=150C Tc=25C 0.1 Sinlge pulse 0.01 0.1 Figure 6. 6/22 1 10 100 Output characteristics VDS(V) Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 Figure 8. Electrical characteristics Transfer characteristics Figure 9. Transconductance Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs temperature Figure 13. Static drain-source on resistance Doc ID 9241 Rev 11 7/22 Electrical characteristics STB/F/I/P/W11NM80 Figure 14. Source-drain diode forward characteristics Figure 15. Normalized on resistance vs temperature Figure 16. Normalized BVDSS vs temperature 8/22 Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 3 Test circuits Test circuits Figure 17. Switching times test circuit for resistive load Figure 18. Gate charge test circuit VDD 12V 47k 1k 100nF 3.3 F 2200 RL F VGS IG=CONST VDD 100 Vi=20V=VGMAX VD RG 2200 F D.U.T. D.U.T. VG 2.7k PW 47k 1k PW AM01468v1 AM01469v1 Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100H S 3.3 F B 25 1000 F D VDD 2200 F 3.3 F VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 21. Unclamped inductive waveform AM01471v1 Figure 22. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 Doc ID 9241 Rev 11 10% AM01473v1 9/22 Package mechanical data 4 STB/F/I/P/W11NM80 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/22 Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 Table 8. Package mechanical data DPAK (TO-263) mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 E 10 E1 8.50 10.40 e 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 0.4 0 8 Doc ID 9241 Rev 11 11/22 Package mechanical data STB/F/I/P/W11NM80 Figure 23. DPAK (TO-263) drawing 0079457_S Figure 24. DPAK footprint(a) 16.90 12.20 5.08 1.60 3.50 9.75 a. All dimension are in millimeters 12/22 Doc ID 9241 Rev 11 Footprint STB/F/I/P/W11NM80 Table 9. Package mechanical data TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 Figure 25. TO-220FP drawing L7 E A B D Dia L5 L6 F1 F2 F G H G1 L4 L2 L3 7012510_Rev_K Doc ID 9241 Rev 11 13/22 Package mechanical data Table 10. STB/F/I/P/W11NM80 IPAK (TO-262) mechanical data mm. DIM. min. typ max. A 4.40 4.60 A1 2.40 2.72 b 0.61 0.88 b1 1.14 1.70 c 0.49 0.70 c2 1.23 1.32 D 8.95 9.35 e 2.40 2.70 e1 4.95 5.15 E 10 10.40 L 13 14 L1 3.50 3.93 L2 1.27 1.40 Figure 26. IPAK (TO-262) drawing 0004982_Rev_H 14/22 Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 Table 11. Package mechanical data TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 P 3.75 3.85 Q 2.65 2.95 Doc ID 9241 Rev 11 15/22 Package mechanical data STB/F/I/P/W11NM80 Figure 27. TO-220 type A drawing 0015988_typeA_Rev_S 16/22 Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 Table 12. Package mechanical data TO-247 mechanical data mm Dim. Min. Typ. Max. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 P 3.55 3.65 R 4.50 5.50 S 5.50 Doc ID 9241 Rev 11 17/22 Package mechanical data STB/F/I/P/W11NM80 Figure 28. TO-247 drawing 0075325_F 18/22 Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 5 Packaging mechanical data Packaging mechanical data Table 13. DPAK (TO-263) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 Doc ID 9241 Rev 11 Min. Max. 330 13.2 26.4 30.4 19/22 Packaging mechanical data STB/F/I/P/W11NM80 Figure 29. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F W K0 B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v2 Figure 30. Reel T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 20/22 Doc ID 9241 Rev 11 STB/F/I/P/W11NM80 6 Revision history Revision history Table 14. Document revision history Date Revision Changes 30-Sep-2004 4 Preliminary version 26-Nov-2005 5 Complete version 07-Apr-2006 6 Modified value on Figure 8 15-May-2006 7 New dv/dt value on Table 5 20-Jul-2006 8 The document has been reformatted 20-Dec-2007 9 Updated ID value on Table 2: Absolute maximum ratings 24-Mar-2010 10 Inserted dv/dt value in Table 2: Absolute maximum ratings 12-Sep-2011 11 Added new package and mechanical data : IPAK Minor text changes Doc ID 9241 Rev 11 21/22 STB/F/I/P/W11NM80 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 22/22 Doc ID 9241 Rev 11