S/TRI/SWT861730/B/12/06/2001 page 1 / 3 F/GB Relais Statique Triphase Three Phase Solid State Relays SWT861730 24 to 520 VAC - 3 x 28 ARMS 5000A2 s * Relais synchrone sortie AC Pret a l'emploi * Commande 8,5-30 Vdc/ 10-30VAC . LED. * Protection interne par RC et ecreteur de tension . * IP20 * Zero cross AC output. For all types of loads * 8,5-30 VDC; 10-30VAC control voltage with LED * Internal protection by and clamping voltage. * IP20 Dimensions / Dimensions: 172 100 90 Circuit equivalent/Equivalent circuit : L1/R 7+ Adaptateur / Adapter U 25 L2/S 110 Adaptateur / Adapter 5 LED 110 V L3/T Adaptateur / Adapter 8- W Unit VDC VAC mA V V Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee isolement/ Rated impulse voltage Uimp 4000 VRMS VRMS V fig. 1 :Caracteristique d'entree / Control characteristic 70 60 50 Ic(mA) Caracteristiques de commande (a 20C) / Control characteristics (at 20C) AC-DC Parametre / Parameter Symbol Min Nom Max Tension de commande / Control voltage : DC Uc 8,5 24 30 Tension de commande / Control voltage : AC Uc 10 30 Courant de commande / Control current (@ Uc ) Ic 15 50 65 Tension de relachement/Release voltage Uc off 4 Resistance interne / Input internal resistor fig.1 Rc 410 Tension inverse / Reverse voltage Urv polarity free 40 30 20 10 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Uc(V) Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. Conditions Symbol Typ. 1900 -40 / +100 -40 / +100 Unit g C C celduc r e l a i s S/TRI/SWT861730/B/12/06/2001 page 2 / 3 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Conditions Tension de charge / Load voltage Plage tension de fonctionnement / Operating range ( 480Vrms + 10% ) Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Ie nom Courant nominal AC-51 non permanent/ AC-51 no permanent nominal current ( see Fig. 2 ) ( see Fig. 2 ) Courant nominal AC-51/ AC-51 nominal current @25C Courant nominal AC-53/ AC-53 nominal current ( see Fig. 2 ) Puissance max (moteur triphase) Max 3 pole motor power (400 VAC) Puissance max (moteur triphase) 3 pole motor power(400VAC)/EN60947-2 Courant de surcharge non repetitif /Non repetitive overload current tp=10ms (Fig. 3) Chute tension directe crete/ On state voltage drop @ Ie nom Courant de fuite etat bloque/ Off state leakage current @Ue, 50Hz Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Uc nom DC ,f=50Hz Temps d'ouverture/ Turn off time Uc nom DC ,f=50Hz Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level IEC 1000-4-4 (burst) EMC Test d'immunite conduite / Conducted immunity level IEC 1000-4-5(schocks) Conformite / Conformity EN60947-4-x Symbol Ue Uemax Up Usync Ua Ie AC-51 Ie AC-51 Ie AC-53 Pn Pn Itsm Vd Ilk Ie min ton max toff max f dv/dt di/dt I2t Typ. Unit 400 V rms 530 V rms 1200 V 12 V 10 V 75 A rms 3x28 A rms 16 A rms 7,5 kW 5,5 kW 1000 A 1,4 V 2,5 mA 5 mA 10 ms 10 ms 10-400 Hz 500 V/s 50 A/s 5000 A2s 4kV criterion A 2kV crit.A 120 Caracteristiques thermiques / thermal curves : 110 100 Full on -state Total wasted power (W) 90 80 heatsink max =100C 70% duty cycle 70 60 50% duty cycle 50 40 heatsink max = 80C in compliance with EN60947-1 30 30% duty cycle 20 10 0 Fig.3 Courbes de surcharge de courant / Overload current curves 0 5 10 15 20 25 30 35 40 45 50 RMS load current (A) Surge current Itsm (A peak) = f(t) for models with Itsm =1000A Itsm (Apeak) 1500 No repetitive Itsm (Apeak)=f(t) without voltage reapplied 1000 500 0 Repetitive Itsm (Apeak)=f(t) with voltage reapplied for initial Tj =70C 0,01 0,1 t (s) 1 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. 10 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature (C) 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i s S/TRI/SWT861730/B/12/06/2001 page 3 / 3 F/GB SVT Cablage commande / Wiring of the control circuit: nombre de fils/ NUMBER OF WIRES 1 MINIMUM TORQUE couple serrage SCREWDRIVER TYPE 2 tournevis tournevis SOLID FINE STRANDED SOLID FINE STRANDED (No ferrule) (With ferrule) (No ferrule) (With ferrule) rigide sans embout multibrins avec rigide sans embout multibrins avec embouts embouts N.m 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 SVT 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,8 x 5,5 mm POZIDRIV 2 1,2 Cablage puissance / Wiring of the power circuit: NUMBER OF WIRES MINIMUM TORQUE couple serrage SCREWDRIVER TYPE 1 2 tournevis tournevis SOLID FINE STRANDED SOLID FINE STRANDED (No ferrule) (With ferrule) (No ferrule) (With ferrule) rigide sans embout multibrins avec rigide sans embout multibrins avec embouts embouts N.m 1,5 ... 10 mm2 1,5 ... 6 mm2 1,5 ... 10 mm2 R S 1,5 ... 6 mm2 T R 0,8 x 5,5 mm S T Resistive or inductive load POZIDRIV 2 R S 1,8 T M Application typique /Typical application: celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19