ERP610
• Ceramic AC Capacitors
• Class X1, 760V AC/Class Y1, 500VAC
TYPICAL APPLICATIONS CONSTRUCTION
TECHNICAL DATA
For worldwide use as electromagnetic
interference suppressor in all X1 and Y1
applications.
Disc capacitors with epoxy coating.
Epoxy dipped, insulating, fl ame retarding
according to UL 94V-0.
X1 Y1
Rated voltage U
R
760 VAC, 50 Hz 500 VAC, 50 Hz
760 VAC, 50 Hz 500 VAC, 50 Hz
760 VAC, 50 Hz 500 VAC, 50 Hz
(IEC 60384-14.2)
Capacitance range
33-4700 pF
Capacitance tolerance
± 10%, ± 20%
Temperature range
(-40 to +125)°C
Climatic category
IEC 40/125/21
Climatic category IEC 40/125/21Climatic category
Approvals
VDE, UL, CSA
Dissipation factor tan
δ
≤
25 • 10
-3
Test voltage between
Component test:
terminals
4000 VAC, 50 Hz, 2 s
As repeated test admissible only once with
3600 VAC, 50 Hz, 2 s
Random sampling test (destructive test):
4000 VAC, 50 Hz, 60 s
Dielectric strength of
4000 VAC, 50 Hz, 60 s (destructive test)
body insulation
Insulation resistance
≥
10 • 10
9
Ω
Taping and special lead
On request
confi gurations
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
2.2 nF to 4.7 nF 33 pF to 1.5 nF
All approval marks are also shown on the
label.
ARTICLE TABLE
APPROVALS/REFERENCE DOCUMENTS
Certifi cation Body Specifi cation Approval reference
VDE EN 132400 40001993, 40001996
UL UL 1414 (U
R
= 250 VAC) E73869
CSA C 22.2 No. 1-M90 (U
R
=250 VAC) 216038
(cUL recognition)
ORDERING INFORMATION
Article code
1st block 2nd block
See article table See separate brochure:
Pos. 13 Capacitance tolerance code: Ceramic Disc, EMI and Safety Capacitors,
M = ± 20% standard General information
K = ± 10% option Page 5
See article table and page 19 in the Evox Rifa Film Capacitors 2003 catalogue. For
options, see Ceramic Disc, EMI and Safety Capacitors, General information, Page 5.
PACKING
The box dimensions for bulk packaging
are 245 x 145 x 80 mm. Quantity/package
as per article table.
Reels with taped capacitors are packed
10 in a box with dimension 370 x 370 x
560 mm. Quantity/reel according to article
table. The standard quantity/reel is for
360 mm reel. If 500 mm reel is required,
it must be specifi ed when ordering and
the quantity is 2 x the given quantity.
MARKING
DATA SHEET ERP610
Specifi cations subject to change
without notice
© KEMET
ERP610
Capaci- Dimensions
tance D x s Max p±1* d±0.05* V±0.5* Article code Ceramic
pF (mm) (mm) (mm) (mm) 1 st block dielectric
33 8.0 x 6.0 12.5 0.6 1.9 ERP610VH2330M N 750
47 8.0 x 6.0 12.5 0.6 2.3 ERP610VH2470M K 1200
68 8.0 x 6.0 12.5 0.6 2.3 ERP610VH2680M K 1200
100 8.0 x 6.0 12.5 0.6 2.3 ERP610VH3100M K 1500
150 8.0 x 6.0 12.5 0.6 2.3 ERP610VH3150M K 2000
220 8.0 x 6.0 12.5 0.6 2.3 ERP610VH3220M K 2000
330 8.0 x 6.0 12.5 0.6 2.5 ERP610VH3330M K 2000
470 8.0 x 5.0 12.5 0.6 2.1 ERP610VH3470M K 4000
680 8.0 x 5.0 12.5 0.6 2.1 ERP610VH3680M K 4000
1000 9.0 x 5.0 12.5 0.8 2.1 ERP610VH4100M K 4000
1500 10.0 x 5.0 12.5 0.8 2.1 ERP610VH4150M K 4000
2200 12.0 x 5.0 12.5 0.8 2.1 ERP610VH4220M K 4000
2700 13.0 x 5.0 12.5 0.8 2.1 ERP610VH4270M K 4000
3300 15.0 x 5.0 12.5 0.8 2.1 ERP610VH4330M K 4000
3900 15.0 x 5.0 12.5 0.8 2.1 ERP610VH4390M K 4000
4700 17.0 x 5.0 12.5 0.8 2.1 ERP610VH4470M K 4000
* Standard lead confi guration, other lead spacing and diameter available on request.
ERP
760~X1
500~Y1
33p M
IEC 384-14/2
760 500 250~
X1 Y1 c � us
ERP 2n2 M
ERP
ERP
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
