Features Regulated Converters 4:1 Wide Input Voltage Range 12 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Five-Sided Shield No Derating to 61C Standard DIP24 Pinning Efficiency to 8 8 % Description The RP12-AW series wide range input DC/DC converterc are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. Selection Guide 24V and 48V Wide Input Types Input Range VDC Output Voltage VDC Output Current mA Input(4,5) Current mA RP12-243.3SAW** 9-36 3.3 3500 55/602 84 2000F RP12-2405SAW** 9-36 5.1 2400 55/614 87 2000F RP12-2412SAW** 9-36 12 1000 25/610 86 430F RP12-2415SAW** 9-36 15 800 25/610 86 300F RP12-483.3SAW** 18-75 3.3 3500 20/301 84 2000F RP12-4805SAW** 18-75 5.1 2400 20/307 87 2000F RP12-4812SAW** 18-75 12 1000 13/302 87 430F RP12-4815SAW** 18-75 15 800 13/298 88 300F RP12-2405DAW** 9-36 5 1200 20/625 84 1250F RP12-2412DAW** 9-36 12 500 25/610 86 200F RP12-2415DAW** 9-36 15 400 25/610 86 120F RP12-4805DAW** 18-75 5 1200 10/309 85 1250F RP12-4812DAW** 18-75 12 500 13/301 87 200F RP12-4815DAW** 18-75 15 400 13/301 87 120F Part Number DC/DC-Converter 12 Watt DIP24 & SMD, Single & Dual Output UL-60950-1 Certified E196683 RP12-AW ** add Suffix SMD for SMD package Derating Graph (Ambient Temperature) RP12-4805SAW 125 100 75 Output Power (%) RP12-AW DIP24 (SMD) Efficiency(6) Capacitive(7) Load max. % POWERLINE 50 75Vin Natural Convection Nom Vin 25 Derating graphs are valid only for the shown part numbers. If you need detailed deratinginformation about a part-number not shown here please contact our technical support service at info@recom-development.at 0 -40 -25 -10 0 50 60 70 80 90 100 110 Ambient Temperature Range (C) 65 Please Read Application Notes P-20 REV: 0/2009 www.recom-electronic.com RP12-S_DAW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25C unless otherwise noted) Input Voltage Range 24V nominal input 48V nominal input 9-36VDC 18-75VDC Input Filter Pi Type Input Surge Voltage (100ms max) 50VDC (24V Type), 100VDC (48V Type) Input Reflected Ripple (nominal Vin and full load) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see note 1) Remote OFF input current 20mAp-p 450ms typ. Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA DC-DC ON DC-DC OFF Nominal input Output Power 12W max. Output Voltage Accuracy (full Load and nominal Vin) 1.2% Minimum Load 0% Line Regulation (low line, high line at full load) 0.2% Load Regulatiom (0% to 100% load) 0.5% Single, 0.5% Cross Regulation Dual Ouput (asymmetric 25% <>100% Load ) 5% Ripple and Noise (20MHz bandwith) 85mVp-p Temperature Coefficient 0.02%/C max. Transient Response (25% load step change) Input Voltage Variation, dv/dt 250s complies with ETS300 132, part 4.4 Over Load Protection (% of full load at nominal Vin) Zener Diode Clamp See Application Notes Short Circuit Protection Continuous, automatic recovery Efficiency see Selection Guide" table In to Out and I/O to case 1600VDC min. Isolation Resistance 10 G min. Isolation Capacitance 1500pF max. Operating Frequency Operating Temperature Range (No derating) 5.1, 12, 15, 12, 15V 3.3, 5V 400kHz typ. -40C to +65C -40C to +61C Maximum Case Temperature +105C Storage Temperature Range -55C to +125C Thermal Impedance Natural convection Case Material Nickel plated copper with non-conductive plastic base Potting Material Weight Conducted Emissions (see note 3) Radiated Emissions (see note 3) ESD Radiated Immunity Fast Transient Surge Conducted Immunity Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Thermal Shock 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity www.recom-international.com 18g (DIP), 20g (SMD) Class A Class A Perf. Critera B Perf. Critera A Perf. Critera B Perf. Critera B Perf. Critera A MIL-STD-810D Vibration MTBF (see note 2) 20C/Watt 5% to 95% RH Bellcore-TR-NWT-000332 REV:0/2009 2350 x 103 hours P-21 RP12-AW Overvoltage Protection (Single) Undervoltage Protection Isolation Voltage 5V/ms 150% typ RP12-S_DAW Series POWERLINE DC/DC-Converter Notes : 1. 2. 3. 4. 5. 6. 7. The ON/OFF control pin voltage is referenced to negative input. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). Requires external filter to meet EN55022 Class A Typical value at nominal input voltage and no load. Maximum value at nominal input voltage and full load Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. Package Style and Pinning (mm) DIP24 Package Style 31.80 3rd angle projection 20.30 10.20 3.8 2 5.10 20.30 2.54 15.20 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin NC = No Connection 0.25 x 0.50 Rectangular Pin 9 11 16 14 1 2 3 RP12-AW Pin Connections Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin Pin Pitch Tolerance 0.35 mm Bottom View 23 22 SMD Package Style 32.00 20.30 SMD Package Style Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 31.40 11.20 2.54 10.90 3.81 6.35 Pin area 0.1 x 0.50 21.30 Pin Connections 25.40 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 11 x 2.54 P-22 16 15 14 13 Top View Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin Pitch Tolerance 0.35 mm 1 27.94 REV: 0/2009 www.recom-electronic.com