Interconnect Cable Assembly Tools Band-It(R) Shield Termination Tools, Connector-to-Backshell Holding Tools, Fiber Optic Termination Kits and More! United States United Kingdom Germany France Nordic Italy Spain Japan To Most People It's Just a Backshell To Glenair It's a Promise M ost customers have a simple expectation when they go shopping for safety-critical interconnect components: They want fast and accurate service. Glenair addresses this most basic customer requirement in several different ways. First and foremost, by providing immediate access to our technical information and product documentation: whether you prefer an office visit, the telephone, the Internet, a CD or a printed catalog, Glenair is ready with answers to your most complex questions and design challenges. Secondly, Glenair stocks thousands of popular catalog products for those situations when even a two or three week leadtime is just too long. We stock over 65,000 interconnect components--bagged and tagged and ready for immediate shipment. And for those situations when a customized solution is required, our engineers are fully versed in all aspects of interconnect system design: from shielding against EMI, to reducing weight and connector package size, to stopping corrosion and other forms of environmental damage. You have a simple expectation: fast and accurate service. At Glenair, we're ready to give you exactly that. It's a promise. 1211 Air Way Glendale, California 91201-2497 Telephone: 818-247-6000 * Facsimilie: 818-500-9912 * EMail: sales@glenair.com United States * United Kingdom * England * Nordic www.glenair.com * France * Italy * Spain * Japan The world's broadest selection of interconnect products-in stock and ready for immediate same-day shipment Series ITS Reverse Bayonet Power and Signal Connectors Interconnect Product Guide CD, featuring our entire library of Glenair catalogs and data sheets. In addition to over a dozen product line catalogs, the CD includes a powerful part number development program that takes all the pain and confusion out of ordering interconnect components. An easy-to-use inventory search program provides ready access to 60,000 MILSTD and commercial part numbers. Over 200 MIL-C-5015 power and signal insert arrangements: AWG #18 to #4/0. Ruggedized reverse bayonet coupling. VG95234 qualification. Ideal for rail, mass transit and military vehicles. Micro-D Twistpin Connectors and Accessories Glenair offers both Military Standard 83513 Micro-D connectors as well as COTS selections, backshells, mounting hardware and more. Our TwistPin contact provides superior performance. Available now: Glenair's Composite Thermoplastic Interconnect Solutions EMI Solutions Page B-8 TwistPin Connectors and Accessories Micro-D * Nanominiature United States United Kingdom Germany France Nordic Italy Spain Japan Glenair is the world's leading manufacturer of composite interconnect solutions. We are the `go-to' supplier for advanced composite technologies for commercial and military interconnect applications. Series 89 Nanominiature Connectors Military Standard Connector Accessories MIL-DTL-32139 and Glenair commercial equivalent .025 inch contact spacing ultra-miniature interconnects used in missioncritical applications such as: UAV's, satellites, missile systems and geophysical instruments. If the MS connector accessory you need isn't in here - it doesn't exist. Search this easy-to-use catalog by accessory type or Mil-Spec slash number, then place your order against Glenair's 60,000 part number same-day inventory. Series 89 Nanominiature Connectors MIL-DTL-32139 Qualified Connectors for Mission-Critical Board-to-Wire Applications United States United Kingdom Germany France Nordic Italy Spain Japan Fiber Optic Interconnect Solutions Series 80 "Mighty Mouse" Connectors and Cables Tactical fiber optic connectors, cables, and termini for airframe, shipboard, and military ground vehicles. Catalog features Glenair's innovative high-density (GHD) connector system for reduced size and weight applications. Glenair's connector series that reduces interconnect system size and weight by 50% compared to standard MIL-DTL-38999 connectors. Now used on hundreds of mission-critical military and commercial applications. Fiber Optic Interconnect Solutions Tactical Fiber Optic Connectors, Cables and Termini U nited States U nited K i ngd om G e r m a n y F r a nc e N o r d i c I t a ly Spain Japan Mil-Spec Backshells and Connector Accessories U n i t e d S t a t e s U n i t e d K i n g d o m G e r m a n y F r a n c e N o r d i c I t a l y S p a i n Series 80 "Mighty Mouse" Connectors and Cables The Shielded Environmental Connector with Mil-Spec Performance and Ultraminiature Size United States United Kingdom Germany Visit us at www.glenair.com and use the literature order form for immediate catalog fulfillment France Nordic Italy Spain Japan A World of Interconnect Solutions Glenair, Inc. 1211 Air Way * Glendale, California * 91201-2497 Telephone: 818-247-6000 * Fax: 818-500-9912 * sales@glenair.com www.glenair.com Telephone: Glenair Industrial Power and 203-741-1115 Signal Connector Group Facsimile: 25 Village Lane 203-741-0053 Wallingford, CT sales@glenair.com 06492 Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park P.O. Box 37, Mansfield Notts, NG18 5BY England Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL 60712 Glenair Nordic AB Gustav III : S Boulevard 46 S - 169 27 Solna Sweden Glenair Electric GmbH Siemensstrasse 9 D-61449 Steinbach Germany Telephone: 847-679-8833 Facsimile: 847-679-8849 Telephone: 49-6171-5905-0 Facsimile: 49-6171-5905-90 Glenair Iberica C/ La Vega, 16 45612 Velada Spain germany@glenair.com Glenair Italia S.R.L. Via Santi, 1 20037 Paderno Dugnano Milano, Italy Telephone: 39-02-91082121 Facsimile: 39-02-99043565 sales-italia@glenair.it (c) 2008 Glenair, Inc. Printed in U.S.A. Telephone: 44-1623-638100 Facsimile: 44-1623-638111 sales@glenair.co.uk Telephone: 46-8-50550000 Facsimile: 46-8-50550001 sales@glenair.se Telephone: 34-925-89-29-88 Facsimile: 34-925-89-29-87 sales@glenair.es Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc #2 31200 Toulouse France Telephone: 33-5-34-40-97-40 Facsimile: 33-5-61-47-86-10 sales@glenair.fr Backshell Assembly Tools, Banding Tools and Accessories Plus Fiber Optic Termination Kits Pages 3 - 8 Introduction to Connector Backshell Assembly Tools Pages 9 - 13 Backshell Assembly Wrenches, Pliers and Kits Pages 14 - 41 Plug and Receptacle Holders, and Torque Wrenches Pages 42 - 50 Banding Tools and Accessories Pages 52 - 63 Fiber Optic Tool Kits, Polishing and Cleaning Systems Pages 64 - 67 Glenair Earth Bonding System Index Introd Conn uction: ector Backs Part Nu Table mber Ind ex of Backshe Assem hell to ll EMI bly Too Shie to Connect ld Term or Asse The ls Inter BAND-IT (R) ination Tool mbly Tool conn s...3 ect Syst System.. s: Conte and Rec 600L eptacle Hold nts L005 PATT er........... and 600U Recepta 602 Plug .............. cle 005 ......2 6 DG1 MIL-DTL Holder.... Pne 600W 23A Plug -29600, .............. and 005 DG1 ....2 600- umatic Ban Connect Glenair Recepta 23 and 7 086 & ding 600Backshe600-079 ors Plug GL4000 cle Hold Rec 055 600-072 Tools..... Series er...2 ll Asse & 600-102 Field .............. Rep 600- Calibrat 600W eptacle Hold and 8 Tool W00 600- acement mbly Wre Circular Kits........ .46 600- 086-1 Tens ion Key, 5 Glen er........... 091 Inse Plug 074 Pne nche 600ion ..47 072Foot Cou Composi rt Pads..... s and 600- and Rec air Series .............. Pedal umatic Gauges........ 1 and 129 Torq epta .............. 600- pling Wre te-Hex 22 Con .......29 Banding Con cle 600 157 Com nch. ..........48 Com Hold ue trol, -065 nect ....9 Tool Backshe Cou Calibrat and posi .............. TG37 posite CouTool Hex er........... ors .............. Foot ......3 MILTG70 pling Wre te-Hex ion Kit.. Inst ructll Shield for DTL pling 0 MIL....10 DTL-837 -26500 Nuts....... TG69 Strap Wre nch............... ions Terminati ............ .............3 Con and nch........ Soft ..... ..... on Asse ......49 23 .............. Fiber Jaw TG8 TG38 nector Wre Series 1 ....... ..... ..... mbly III MIL600- 2 Strap WrePliers, TG8 .............. ....11 nch. ..... ..... TerminOptic As 004, Series DTL-501 .............. 50 sem 600- 600-007, nch........ 0 Tool Kit ...12 2 5 ....... Con atio and TG3 077 .............. and Polish ....... bly nector 600MIL9 MILn Series Torq Wrench. DTL-837 ..32 .......13 DTL MIL80 "Mig ue Wre 076 and ing Tooand Ter , 187DTL-837 -26482 and nche 23 hty 017 NAS Series .............. ls....... mini 600B Connector Mouse" s............ ..33 1599 23 Seri Kit for Glenair I ....... and 005 MIL- Hold Jam .......14 TG4 Fiber .............. II, Nut Spa 8372 7 MIL- Connect es I, and (181 MIL-PRF Opti DTL-501ing Tool....... 3 nner Connect DTL-229 or Wre 187- -001 & 002) -29504/4 c Terminati 52 Seri ............1 5 and nch........ 018 92 or Wre .............. & /5 Term on TG48 MIL600C es II Plug ....34 Term Glenair nch. DTL- 5 MIL005 MIL- and Rec .............. ini ination Fiber Connect DTL-389 .............. Rec 181Opti epta DTL Kit ........53 or Wre 99 Seri .............. TG52 600D eptacle Hold -22992 cle Hold 182- 011 & -012 for Fron c ....35 es 001 nch. er....16 005 MILMILTerm t Release er.... Plug Connect DTL-815 .............. II MIL181- Polishing ini... DTL-264 .............. and .............. or Wre 11 Seri 600E DTL-837 182- 002 Term Tool for .............. TG60 002 ....... 005 MIL- 23 Seri 82 Seri .............1 es ini... nch. ..36 181MIL8372 DTL-275 .............. II and IV Test Polishing .............. 001 and .55 MILDTL-265es I, and es I and II, 7 3 DTL .............. 182- Probe..... Tool for .............. Plug 00 and NAS 159. Connect -38999 99 and 005 ....... 181....56 ..37 MIL- ....18 600F and Rec or Wre Series TG61 181- Polishing .............. 006 DTL005 MIL- eptacle I nch. MIL3899 187- 012 Term Tool for .............. DTL-275 Holder.... Connect DTL-815 .............. 024 9 ini, 181....57 .............. Series or Wre 11 Seri Glen Cleaning Front Rele 011 and 99 and .............1 TG83 Swa I Plug nch........ es I and ..38 (LN2 ase........ MIL600F GBS air Fiber 9729 DTL- 9 and SJT F00 1000 Optic b for .............. III ...58 Connect ) Con Term and Plug 5 MIL-DTL Recepta Fiber TG90 cle Hold ors.. nector Wre .........39 Optic GBS1001 ini.......... -389 600G and Rec MILInspectio Vide ....... Port nch for er....20 005 MIL- eptacle 99 Seri Connect DTL-389 .............. o Bore ...59 able GCB es II Rec Hold DTL or Wre 99 Seri .............. 1000 n System.. Sco .....40 600H eptacle Hold -28840 er........... nch........ es III Fiber , GCB2000 .............. pe 005 MIL......2 er.... Plug The ......... .............. 1 and and Con Optic Clea DTL-389 .............. and ........60 BA .........31 600H Recepta GTK nector Clea nBlast (R) GCB3000 99 Seri .............2 Clamp ND-IT (R) cle 1000 H005 ning MIL- Holder.... es III Plug 2 and for Fron Fiber Otic Syst ing Sy 600600J Recepta DTL-38999 .............. t Rele Test em......... stem 181052, cle 005 .......62 ase 181- ing Kit 012 Series ......23 .............. 600- 600-052Term Plug MIL-DTL Holder.... Part IV 057, ini.......... 011 and ........42 Num 600- 1, 600-090, 600L and Rec -81511 .............. Plug 600ber 005 LN2 epta Seri ......2 Inde .............. 600- 083-1 Clam057-1, 600- 600-090x.......... 058 ....... 9729 cle Hold es I Thru 4 083 ping (c) 2008 1, er.... IV (SJT ............ ....63 Bands... and Han and 600) Plug ............2 Glen ....64 .............. 600- d Banding 061 air, Inc. and 5 GLEN 082, Tool ...43 AIR Banding 600-056, s............ www , INC .glen 600600air.c . * 121 060 .............. 067 & Tool Rep om ...44 lacemen & 6006001 AIR 068 t Part 062 WAY s Kits. CAG ..45 em Tool .............. Circul ing Glos ..........6 Assemar Backs sary......7 bly Too hell 600006, ls Page 68 Subject and Part Number Index * GL EN E Cod DALE , CA 64 e 0632 4 912 01-249 7* 818 -247-6 000 * FA X E-M ail: Prin ted 818 sale in U.S. A. -500-9 s@g 912 lena ir.co m Stop Toolin' Around Finding the right tool for the job just got a little bit easier N obody can grasp the ins-and-outs of interconnect tool design and manufacturing without a full understanding of cable harness assembly. At Glenair, we not only manufacture the connectors, backshells, cables and enclosures which go into interconnect cable harnesses, we run a top-flight cable assembly service of our own. And we've drawn on this extensive experience to design and build a complete family of specialized backshell assembly tools for most Mil-Standard circular connectors, as well as connector wrenches, mini-strap wrenches, universal connector holding tools and braid termination tools for production use and field maintenance. Glenair is also now offering a broad range of fiber optic termination tools, including complete kits for both our Mil-T29504 and front-release COTS termini. 1211 Air Way Glendale, California 91201-2497 Telephone: 818-247-6000 * Facsimilie: 818-500-9912 * EMail: sales@glenair.com United States * United Kingdom * England * Nordic * France * Italy * www.glenair.com Spain * Japan Introduction Introduction: Backshell to Connector Assembly Tools Glenair Tools Help Prevent False Tightening and Distortion Backshell tightening tools designed by Glenair provide a full 360 gripping surface on backshell coupling nuts. These innovative tools minimize the possibility of coupling nut distortion and false tightening problems when mating backshells to circular connectors. Reliable Installation of Glenair Backshells on Circular Connectors When used with the appropriate connector holders and torque wrenches, Glenair Backshell Assembly Tools provide the user with consistent, repeatable backshell installations. Designed primarily for production assembly use, the tools can also be used equally well for successful field maintenance operations. Glenair Backshell Assembly Tools may also be utilized effectively with backshell rotatable couplers produced by other manufacturers. Consult the Glenair Backshell Assembly Tools, Banding Tools and Accessories catalog for details. Glenair offers torque wrenches in three configurations. The hand-held torque wrench pictured above (top left), and the bench-mounted version (top center) are adjustable to a desired torque level of 20 to 360 inch pounds, and feature a 3/8" drive. A digital model (30-350 in/lbs) features LEDs, audible alarm, and user programmable pre-sets. A bench mount stand is available. A full range of receptacle and plug holders for Mil-Spec connectors and backshells is also offered as well as circular connector backshell assembly and composite hex coupling wrenches, strap wrenches, and soft-jaw pliers. Wide Variety of Glenair Tools for Proper Backshell Installation Glenair offers a variety of tools to accomplish proper tightening. Our 600 Series pliers with replaceable pads are configured to make maximum circumferential support to each specific size backshell to be tightened, and our TG70 strap wrench is intended for general use on any diameter between .50 to 3.00 inches. Hand-held and bench-mount torque wrenches accommodate our 600-005 plug or receptacle connector holders. When tightening a backshell onto a connector, it is important to follow Glenair's recommended procedures for each tool being used. Our Backshell Assembly Tools, Banding Tools and Accessories catalog shows torque values for each specific connector series the backshell is being fastened onto. The recommended values are based on several factors, primarily the connector and backshell thread strengths. Torque values consider additional factors such as plug-to-receptacle alignment key strength, barrel hoop strength and material strength. (c) 2008 Glenair, Inc. When tightening backshells with rotatable coupling nuts, Glenair recommends the backshell be hand tightened to engage the connector's interlocking teeth or spline features, making sure the teeth are fully engaged before fully torquing with our tools. We suggest retorquing by removing the tool and reinstalling the tool approximately 90 away from the initial position and tightening to the recommended value. When applying torque with our TG70 strap wrench, allow for a slight torque variance between the Glenair torque wrench and the offset socket drive on the strap wrench. A strap wrench torque variance chart is provided on page 12 of this catalog. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 7 E-Mail: sales@glenair.com Introduction Introduction: Backshell to Connector Assembly Tools Glenair's TG80 Tool Kit is designed for field use with circular electrical connectors. The products included with this kit fit most connectors covered by Military Specifications, and are used for holding during assembly and disassembly of rear clamp and adapter hardware, and to facilitate connector field repairs and servicing. Contained in a rugged, compact foam-padded metal case, the kit includes two TG70 Strap Wrenches, a pair of TG69 Soft Jaw Pliers, a set of parallel jaw pliers and instructions. Glenair also offers a selection of tool kits per MIL-T83507. Details are available by contacting the factory, your local Glenair representative, or your local Glenair sales and engineering office. Glenair's selection of circular backshell assembly wrenches include round wrenches in all standard sizes that are designed to be employed with Glenair's handheld or bench-mounted torque wrenches. The round design assures even distribution of pressure around the backshell, thereby preventing false tightening and distortion problems. A hex design for Glenair composite coupling applications is offered. Strap wrenches, soft-jaw pliers and connector wrenches for a full range of Mil-Spec applications are available. BAND-IT(R) Pneumatic Banding Tools are offered in two designs, each of which can be enhanced by Band-It's optional foot pedal kit to free both of the operator's hands to help assure more accurate, reliable and faster shield terminations. The Standard Tie-Dex II(R) Pneumatic Banding Tool accommodates standard clamping bands in a tension range from 100-180 lbs. The Tie-Dex II(R) Pneumatic Banding Tool accommodates micro banding clamps in a tension range of 50 to 80 lbs. Each lightweight tool weighs only 2.52 lbs. (91.14 Kg); the control boxes weigh only 2.74 lbs. (1.24 Kg) each. Glenair offers a full range of connector backshell assembly tools to serve virtually all Mil-Spec connectors and backshell accessories. The specially-designed round wrenches prevent false tightening and distortion problems by assuring even distribution of forces throughout the circumference of the backshell and connector. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 8 E-Mail: sales@glenair.com Introduction Introduction: EMI Shield Termination Tools The BAND-IT(R) System Fast, Cost-Effective Field and Factory Terminations The BAND-IT(R) clamping system provides quick and highly reliable termination of braided metallic shielding or fabric braid. Banding technology was first introduced in our industry in 1985 as a solution to the field repair of magnaformed shield terminations on installed cable assemblies for the B-1 bomber. Banding has been a staple of the industry ever since. BAND-IT(R) clamping bands are precision constructed of 300 Series SST/Passivate, and designed for use with the BandIt(R) Hand Banding Tool or the Pneumatic Banding Tool. The bands are offered in the following four configurations to suit a wide range of requirements: Double-wrapped Standard Band accommodates diameters up to 1.8 inches. Double-wrapped Extended Length Standard Band accommodates diameters up to 2.5 inches (63.5mm). The double-wrapped Micro Band accommodates diameters up to .88 inches (22.5mm). The double-wrapped Extended Length Micro Band accommodates diameters to 1.88 inches (47.8mm). All BAND-IT(R) clamping bands may be ordered flat or precoiled in bagged and tagged quantities from 1 to 100. Quick, Easy Field Terminations with the Precalibrated Hand Tool Reliable termination is quickly and easily accomplished in the field with Band-It(R) precalibrated pocket-sized hand tools. High-speed, mass termination production is afforded by the pneumatic clamping tool. The precalibrated hand tool is lightweight and pocket-sized, affording fast braided RFI/EMI/EMP shield termination in the field. Reliable RFI/EMI/EMP Terminations Pneumatic Banding Tool for High-Speed Mass Production The unique low profile and smooth inside diameter of the one-piece type 304 austenitic stainless steel clamping band virtually eliminates RFI/EMI/EMP leakage paths. The lock maintains constant tension under extreme environmental conditions. BAND-IT(R) has passed severe shock, vibration and thermal cycle testing with negligible deterioration of shell conductivity. The pneumatic clamping tool offers the capability to tackle high volume braided shielding terminations quickly and easily. Glenair Assembly Tools Help Prevent Distortion and False Tightening Problems Backshell tightening tools are available which provide virtually a full 360 gripping surface on backshell coupling nuts. These innovative tools minimize the possibility of coupling nut distortion and false tightening problems which can be caused by soft-jaw pliers or strap wrenches. Single Piece Band Construction No welding, soldering, magna forming, and no crimping! The clamping bands provide quick, easy and cost-effective shielding terminations. (Note: Bands must be double coiled.) Clamp Small Diameters Easily, Reliably Reliable Installation of Glenair Backshells on Circular Connectors Double-wrapped, the clamping band is designed to clamp small diameters as easily, quickly and reliably as large diameters. When used with the appropriate connector holders and torque wrenches, Glenair Backshell Assembly Tools provide the user with consistent, (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 9 E-Mail: sales@glenair.com Introduction Introduction: EMI Shield Termination Tools The BAND-IT(R) System repeatable backshell installations. Designed primarily for production assembly use, the tools can also be used equally well for successful field maintenance operations. Glenair Backshell Assembly Tools may also be utilized effectively with backshell rotatable couplers produced by other manufacturers, providing the "B" reference diameters are consistent with those shown within this catalog. Recommended Connector-to-Backshell Tightening Procedures Recommended tightening procedures, tools and torque values offered by Glenair are intended as an aid to properly fasten the backshell to the connector interface threads. Glenair offers a variety of tools to accomplish proper tightening; our 600 Series pliers with replaceable pads are configured to make maximum circumferential support to each specific size backshell to be tightened, our TG70 strap wrench (page 12) is intended for general use on any diameter between .50 to 3.00 inches. Hand-held and bench-mount torque wrenches accomodate our 600005 plug or receptacle connector holders. When tightening backshell onto connectors, it is important to follow Glenair's recommended procedures for each tool being used. When tightening backshells with rotatable coupling nuts, Glenair recommends the backshell to be hand tightened to engage the connectors interlocking teeth or spline features, making sure the teeth are fully engaged before fully torquing with our tools. We also suggest retorquing by removing the tool and reinstalling the tool approximately 90 away from the intial position and tightening to the connector manufacturer's recommended value. Composite backshells should be tightened with 600-079/157 hex pliers to the values shown for MILC-85049 light and medium duty torque. Secondary components such as: Glenair's cable clamps, gland sealing nuts, sleeves or adapters, not directly fastened to the connector should be tightened 40 to 60 inch pounds to insure proper performance. Four Easy Steps for Proper Backshell Assembly 1. Select plug or receptacle holder (most holder series provide "universal polarization", but a few connector series require specific polarization for each alternate keying arrangement). (c) 2008 Glenair, Inc. 2. Set desired torque on torque wrench. 3. Mount holder on square drive of torque wrench. Carefully mate with connector, and hand-tighten Glenair backshell coupling. To assure proper mating, anti-rotation teeth must be fully engaged. 4. Tighten rotatable coupler with assembly tool. Do not use excessive grip on handles. When coupler begins to tighten, relax grip and rotate assembly tool back 90, then resume grip and continue to tighten; repeating this sequence until desired torque level is reached. CAUTION: Do not apply torque in excess of signal setting. Excess torque will cause signal pointer to reset and give erroneous readings. Setting Torque Levels To verify proper backshell installation values, electrical signals are built into bench-mounted (audio) and hand-held (light) torque wrenches. The procedure for setting torque levels is the same for both units. Setting Desired Torque for Right-Hand Thread Tightening: Bezel (1) Memory Pointer (3) Main Pointer (2) To set torque, turn Bezel (1) clockwise until signal is on. Continue to turn Bezel until Main Pointer (2) is at desired torque level on scale. You may cover the audio signal during this procedure to minimize noise level when setting the bench-mounted unit. The Memory Pointer (3) is set by the above procedure. With this accomplished, turn Bezel counterclockwise until the Main Pointer is aligned with zero on the scale. Your torque wrench is now ready for operation. Setting Desired Torque for Left-Handed Thread Tightening: Simply reverse the above procedure for setting the desired torque for left-hand thread tightening. Resetting the Memory Pointer: When you wish to change torque levels, rotate the Bezel counter-clockwise until the signal is on. Continue to rotate Bezel until Memory Pointer is aligned with zero on the scale. now repeat the above procedure for setting torque. See Page 15 for Digital Torque Wrench Information CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 10 E-Mail: sales@glenair.com Introduction Introduction: Interconnect System Tooling Glossary Interconnect Tooling Terms and Definitions Color Coding A system of identification of terminals, wires, and related devices. Conductor Stop Barrel A device on a terminal, splice, contact or tool to prevent excessive extension of the conductor barrel. (1) Conductor Barrel - The section of the terminal, splice or contact that accommodates the stripped conductor. (2) Insulation Barrel The section of the terminal, splice or contact that accommodates the conductor insulation. Connection The joining of two metals by pressure without use of solder, braze, or any method requiring heat. Boot A form placed around the wire terminations of a multiple contact connector as a protective housing or as a container for potting compound. Contact The conductive element in a connector which makes actual contact to transfer electrical energy. Braid Flexible conductor made of a woven or braided assembly of fine wires. Busing The joining of two or more circuits. Butting Dies (Bottoming Dies) Contact Area Crimping dies so designed that the nest and indentor touch at the end of the crimping cycle. The area in contact between two conductors, two contacts, or a conductor and a contact permitting the flow of electricity. Cable Shielding Backshell A device consisting of a backshell and cable support designed to terminate the screen (shield) of an electrical cable. Contact Resistance Electrical resistance of a pair of engaged contacts. Resistance may be measured in ohms or millivolt drop at a specified current over the engaged contacts. Circumferential Crimp The type of crimp where the crimping dies completely surround a barrel resulting in symmetrical indentations in the barrel. Contact Retainer A device either on the contact or in the insert to retain the contact in an insert or body. Closed Entry Contact Size A contact or contact cavity design in the insert or body of the connector which limits the size or position of the mating contact or printed circuit board to a predetermined dimension. An assigned number denoting the size of the contact engaging end. Crimp Coaxial Contact The physical compression (deformation) of a contact barrel around a conductor in order to make an electrical connection. A contact having two conducting surfaces, a center contact and a coaxially placed sleeve. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 11 E-Mail: sales@glenair.com Introduction Introduction: Interconnect System Tooling Glossary Crimping Inspection Hole A pressure method of mechanically securing a terminal, splice or contact to a conductor. A hole placed at one end of a barrel to permit visual inspection to see that the conductor has been inserted to the proper depth in the barrel prior to crimping. Crimping Dies Portion of the crimping tool that shapes the crimp. Locator (See Stop Plate) Device for positioning terminals, splices, or contacts into crimping dies, positioner, or turret heads. Crimping Tool Mechanism used for crimping. Nest The portion of a crimping die which supports the barrel during crimping. Positioner A device when attached to a crimping tool locates the contact in the correct position. Ram The moving portion of the head of a crimping tool. Depth of Crimp The distance the indenter penetrates into the barrel. Die Closure The gap between indenter dies at full handle closure. Usually defined by Go/No-Go dimensions. Full Cycle Control Controls placed on the crimping cycle of crimping tools forcing the tool to be closed to its fullest extent completing the crimping cycle before the tool can be opened. Ratchet Control A device to ensure the full crimping cycle of a crimping tool. Stop Plate (See Locator) A device used to properly locate a terminal, splice or contact in the tool prior to crimping. Strip To remove insulation from a conductor. Stripper A tool or chemical used to remove insulation material from wire or cable. Tensile Test Head Assembly A controlled pull test on the crimp joint to determine its mechanical strength. A positioner or turret designed to attach to a crimping tool. Wire Gauge Indentor The sizes of conductors accommodated by a particular barrel. Also the diameters of wires accommodated by a sealing grommet. The part of a crimping die, usually the moving part, which indents or compresses the contact barrel. Work Curve Insertion and Removal Tool A graph which plots the pull out force, indent force and relative conductivity of a crimp joint as a function of various depths of crimping. A device used to install or remove contacts into a connector. A device used to install or remove taper pins into taper pin receptacles. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 12 E-Mail: sales@glenair.com Wrenches, Pliers & Kits 600-006, 600-079 & 600-102 Circular Backshell Assembly Wrenches and Repacement Insert Pads Product Series 600-006 and 600-102 (Standard Coupling) A B Dash Shell Ref. Ref. No. Size Ref. 6.50 (165.1) .617 (15.7) 08 08/09 6.50 (165.1) .734 (18.6) 10 10/11 6.50 (165.1) .858 (21.8) 12 12/13 6.50 (165.1) .984 (25.0) 14 14/15 6.50 (165.1) 1.112 (28.2) 16 16/17 7.00 (177.8) 1.198 (30.4) 18 18/19 7.00 (177.8) 1.323 (33.6) 20 20/21 7.00 (177.8) 1.448 (36.8) 22 22/23 7.00 (177.8) 1.573 (40.0) 24 24/25 7.00 (177.8) 1.969 (50.0) 28 28 Basic Number 006 - Standard (Aluminum) 079 - Anti-Decoupling (Aluminum) 102 - Standard (Stainless Steel) 600 - 006 - 16 Dash Number or: KIT - Complete Kit A 600-079 and 600-103 (Anti-Decoupling) A B Dash Shell Ref. Ref. No. Size Ref. 7.38 (187.5) .659 (16.7) 01 08/09 7.50 (190.5) .783 (19.9) 02 10/11 7.50 (190.5) .906 (23.0) 03 12/13 7.50 (190.5) 1.035 (26.3) 04 14/15 7.50 (190.5) 1.140 (29.0) 05 16/17 7.75 (196.9) 1.260 (32.0) 06 18/19 8.00 (203.2) 1.383 (35.1) 07 20/21 8.25 (209.6) 1.510 (38.4) 08 22/23 8.25 (209.6) 1.630 (41.4) 10 24/25 2.25 (57.2) Approx. B Adjustable Stop (600-079 Only) APPLICATION NOTES 1. Grips are covered in vinyl. 2. Metric dimensions (mm) are indicated in parentheses. Consult Factory for Larger Sizes Replacement Insert Pads Approx. Length 600-008 - 3.56 (90.4) 600-078 - 4.00 (101.6) .38 (9.7) Approx. Replacing Insert Pads in Backshell Assembly Tools .28 (7.1) Approx. 600-008 Fits standard coupling series sizes 08 through 24, color black. 600-078-01 Fits anti-decoupling coupling sizes 09 through 23, color red. 600-078-02 Fits anti-decoupling coupling size 25, color red. (c) 2008 Glenair, Inc. 1. The urethane pad strips are mechanically retained without adhesive. To remove, grasp an edge of the strip and pull loose from tool. 2. Beginning with retaining hole adjacent to assembly tool hinge, insert first retaining knob on strip into hole. Continue inserting knobs on pad strip into remaining holes on tool. 3. Using side-cutters or scissors, trim end of pad strip flush with metal surface of assembly tool. Retain remainder of strip for replacement in other size assembly tools. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 13 E-Mail: sales@glenair.com Wrenches, Pliers & Kits 600-091 Composite-Hex-Coupling Wrench ALUMINUM TOOL FOR USE WITH GLENAIR COMPOSITE BACKSHELLS B Teflon Coated 600 - 091 - 16 Product Series Basic Number Dash Number (Table I) For Individual Sizes For Kit: KC - Dash Numbers 08 through 28 KLC - Dash Numbers 32 through 44 KIT - Dash Numbers 08 through 44 Set Screw Stop TABLE I: DASH NUMBER AND DIMENSIONS Dash No. 08 10 12 14 16 18 20 22 24 28 32 36 44 7.38 7.50 7.50 7.50 7.50 7.75 8.00 8.25 8.25 8.50 10.00 10.00 10.00 A Ref. (187.5) (190.5) (190.5) (190.5) (190.5) (196.9) (203.2) (209.6) (209.6) (215.9) (254.0) (254.0) (254.0) B +/-.005 (.13) Hex* .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) 3.000 (76.2) Shell Size Ref. 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28 32 36 44 Composite Torque Inch Pounds 40 40 40 40 40 40 80 80 80 120 120 120 160 A APPLICATION NOTES 1. This backshell assembly tool is designed for Glenair composite hex coupling applications and should be used in conjunction with Glenair torque wrenches (see page 14). 2.250 (57.15) Approximate 2. These wrenches are made of aluminum alloy with vinyl grips. 3. B Hex is critical, adjust set screw until dimension is within tolerance (+/- .005) 4. Metric dimensions (mm) are indicated in parentheses. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 14 E-Mail: sales@glenair.com Wrenches, Pliers & Kits 600-157 Composite-Hex-Coupling Wrench STAINLESS STEEL TOOL FOR USE WITH GLENAIR COMPOSITE BACKSHELLS 600 - 157 - K Product Series Basic Number B Dash Number for Individual Wrench or: K - All Wrench Sizes 08 through 24, No Case KC - All Wrench Sizes 08 through 24 with Case A TABLE I: DASH NUMBER Dash Number A Ref B Hex .005 (0.1) 08 6.700 (170.2) 10 12 Connector for Shell Size Codes A&F Code H .750 (19.1) 08 09 6.750 (171.5) .875 (22.2) 10 11 6.810 (173.0) 1.000 (25.4) 12 13 14 6.880 (174.8) 1.125 (28.6) 14 15 16 6.950 (176.5) 1.250 (31.8) 16 17 18 7.050 (179.1) 1.375 (34.9) 18 19 20 7.150 (181.6) 1.500 (38.1) 20 21 22 7.380 (187.5) 1.625 (41.3) 22 23 24 7.440 (189.0) 1.750 (44.5) 24 25 2.00 (50.8) APPLICATION NOTES 1. This backshell assembly tool is designed for Glenair composite hex coupling applications and should be used in conjunction with Glenair torque wrenches (see page 14). 15.500 (393.7) 2. These wrenches are made of stainless steel with vinyl grips. 13.400 (340.4) 3. Metric dimensions (mm) are indicated in parentheses. 4.000 (101.6) Dimensions for Reference Only (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 15 E-Mail: sales@glenair.com Wrenches, Pliers & Kits TG70 Strap Wrench 6.500 (165.1) Approx GLENAI R I NC. TG70 3/8 Drive, Drive for 3/8Square (9.5) Square For Torque Wrench 600-004 Torque Wrench 600-004 3.000 (76.2) Dia. Max with 18-Inch Single Strap 3.000 (76.2) Dia. Max. with 18 Inch Single S 2.000 Dia. (50.8) Max. 2.000 Dia. (50.8) Max.Strap with 12 Inch Single S with 12-Inch Single 3.000 (76.2) Dia. Max. See Note 2 See Notes 2, 4 and 5 Basic Part Number Torque Wrench (Omit for None) TG70 - 1 - 18 Strap Length in Inches (See Notes2 and 4) Lengths Available: 12, 18, 24 and 36-Inch Only Standard length is 12 Inches, Omit Dash Number for Standard APPLICATION NOTES 1. These wrenches are made of the following materials: Wrench Handle - Aluminum Alloy/Nickel Plate. Wedge - Stainless Steel/Passivated. Strap - Impregnated Fabric. Straps are 1/2 inch (12.7) in width. 2. Replacement straps are available. Specify part number G70515-xx for 12, 18, 24 or 36-inch strap. 24 and 36 inch for double wrap. 3. Metric dimensions (mm) are indicated in parentheses. 4. Double wrap as shown for heavy duty range. 5. Not recommended for composite coupling nuts (use 600-091 or 600-157). VARIANCE CHART TG-70 Strap Wrench Used with Glenair Torque Wrenches Recommended Installation Torque Light/Medium Duty Heavy Duty Accessory 5 Inch Pounds 5 Inch Pounds Shell Size TG70 Torque Part Torque TG70 Torque Part Torque 60 08/09 28 35 45 80 10/11 28 35 70 110 [80] 12/13 30 40 75 120 [80] 14/15 30 40 75 120 [80] 16/17 30 40 75 120 [80] 18/19 30 40 75 140 [100] 20/21 75 80 95 140 22/23 75 80 120* 140 24/25 75 80 120* 150 28 135* 150 32 150* 150 36 150* * TG70 Not Recommended For Values of 120 Inch Lbs. or Greater. (c) 2008 Glenair, Inc. CAGE Code 06324 VARIANCE CHART NOTES 1. Recommended installation torque is approximately 80% of MIL-C-85049 accessory thread strength values. 2. Heavy duty installation torque values may be difficult to attain with the TG70 Strap Wrench; the values shown in brackets [ ] are the maximum attainable with the TG70 Strap Wrench using a single wrap. 3. Glenair recommends using 600 series torque tools whenever possible. When torque loading exceeds 75 inch pounds, or to attain the heavy duty torque values shown, a double wrap strap provides suitable friction to achieve torque values. 4. Glenair recomends that heavy duty torque values be directly read through the connector shell body with the use of 600-005 connectors holding tools. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 16 E-Mail: sales@glenair.com Wrenches, Pliers & Kits TG69 Soft Jaw Pliers, TG80 Tool Kit and TG82 Strap Wrench TG82 Strap Wrench 2.50 (63.5) Max Capacity (1/4 Drive) Note: The replacement strap part number is G62748-11. Consult factory for other lengths. 7.0 (177.8) Approx. 7/16 (11.1) NOTE: Not recommended for composite coupling nuts (use 600-091 or 600-157) 9.63 (244.6) TG69 Soft Jaw Pliers NOTE: Not recommended for composite coupling nuts (use 600-091 or 600-157) TG80 Tool Kit The TG80 Tool Kit is designed for field use with circular electrical connectors. The products included with this kit fit most connectors covered by Military Specifications, and are used for holding during assembly and disassembly of rear clamp and adapter hardware, and to facilitate connector field repairs and servicing. Kit includes 2 TG70 Strap Wrenches, a pair of TG69 Soft Jaw Pliers, a set of parallel jaw pliers and instructions. Also available: Tool kits per MIL-T-83507. Please consult factory for ordering information. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 17 E-Mail: sales@glenair.com Torque Wrenches 600-004, 600-007, 600-076 and 600-077 Torque Wrenches 3/8 to 1/4 Adapter Hand-Held Torque Wrench 3/8" Drive Requires two Panasonic SR44W or equivalent batteries 10.0 (254.0) Approx. 600-076 High Torque Adjustable to desired torque level of 20 to 360 inch pounds 600-004 Standard Torque 0 - 150 lb./in. (Not Shown) Bench-Mounted Torque Wrench 3/8 to 1/4 Adapter 3/8 Square Drive 3/8" Drive Visual Alert Light Require two Panasonic SR44W or equivalent batteries 600-077 High Torque Adjustable to desired torque level of 20 to 360 inch pounds 600-007 Standard Torque 20 25 15 120 10 160 200 30 240 80 35 40 5 3 280 20 40 320 360 45 50 5/16 Mounting Hole Typical 2 Places 10.375 (263.5) 3.00 (76.2) 4.00 (101.6) 4.00 (101.6) 0 - 150 lb./in. (Not Shown) Metric dimensions (mm) shown in parentheses. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 18 E-Mail: sales@glenair.com Torque Wrenches 600-161 Digital Torque Wrench and 600-162 Bench Stand DIGITAL TORQUE WRENCH AND BENCH STAND Digital Readout For Improved Accuracy Torque Wrench 600-161 12.60 Mini USB Adapter Port AC Adapter Port 3/8" To 1/4" Adapter O1.33 The Glenair Dual Drive Digital Torque Wrench (600-161) features a dual sided drive head for hand or bench mount use. Features an ergonomic handle with built-in digital readout display. Available torque units include: Ft-lb, Nm, Kg-Cm, or In-lb. Peak and Track modes available. Data collection via supplied USB and software provides quality departments the ability to track and record individual torque values. 1.40 1. 2. 3. 4. Use in conjunction with glenair connector and backshell tools Torque range: 15-300 in/lbs; digital graduations 1/10 In/lb; Accuracy: cw/ccw 2% of reading 10% to 100% of full scale replacement battery: AA x 2 6. USB cable, datatracking software, AC adapter, and 3/8" to 1/4" drive adapter included weight: 1.45 Lb, w/case 2.28 Lb Horizontal Bench Stand Bench Stand 600-162 Constructed from aluminum the bench mount (600-162) features five position tilt settings. 4.00 14.38 3/8" Sq Drive 5. 1. 2. Use in conjunction with glenair 600-161 digital torque wrench Material: aluminum, steel, bronze weight: 4.62 Lb 5 Position Tilt 3.65 (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 19 Rev. May-05-2010 E-Mail: sales@glenair.com Torque Wrenches Series 80 "Mighty Mouse" Jam Nut Spanner and Connector Holding Tools Spanner Tool for Tightening Series 80 Jam Nuts Spanner Tool Connector Holding Tool for\Tightening Backshells and Accessories 1 Plug Holder 2 Receptacle Holder (c) 2008 Glenair, Inc. Use these tools to tighten Series 80 jam nuts. 1/4" or 3/8" square drive for use with torque wrenches. Heattreated steel, nickel plated. Shell Size Series 800 5 600-146-01 6 600-146-02 7 600-146-03 8 600-146-04 9 600-146-05 10 600-146-06 11 -- 12 600-146-08 13 -- 14 600-146-10 15 600-146-11 16 -- 17 -- 18 -- 19 -- Series 801 600-146-02 600-146-03 600-146-05 600-146-05 600-146-06 600-146-07 -- -- 600-146-10 -- -- 600-146-13 600-146-14 -- -- Spanner Tool Part Number Series 804 Series 803 Style 07 600-137-02 600-146-03 600-137-03 600-146-04 600-137-05 600-146-06 600-137-05 600-146-06 600-137-06 600-146-07 600-137-07 600-146-08 -- -- 600-137-10 600-146-10 -- -- 600-137-13 600-146-12 600-137-14 600-146-13 -- -- -- -- -- -- -- -- Series 804 Style 00 600-147-5 600-147-6 600-147-7 600-147-7 600-147-9 600-147-10 -- 600-147-12 -- 600-147-14 600-147-15 -- -- -- -- Series 805 600-154-08 600-154-09 600-154-09 600-154-11 600-154-12 -- -- 600-154-15 -- -- 600-154-18 600-154-19 Use these tools to hold Series 80 connectors while installing thread-on adapters or backshells. Receptacle tool for holding Series 80 receptacle Plug tool for holding Series 80 plug connectors. connectors. Heat-treated steel, nickel plated. Heat-treated steel, nickel plated. 2 1 Shell Size Series 800 5 6 600M005-05 600M005-06 7 600M005-07 8 9 10 11 12 13 14 15 16 17 18 19 600M005-08 600M005-09 600M005-10 -- 600M005-12 -- -- -- -- -- -- -- Holding Tool Part Number (Add P or R) Series 801 Series 803 Series 804 600MM005-05 600-141-5 600-140-5 600MM005-06 600-141-6 600-140-6 600MM005-07 600-141-7 600-140-7 600MM005-08 600-141-8 600-140-8 600MM005-09 600-141-9 600-140-9 600MM005-10 600-140-10 600-141-10 -- -- -- -- 600-140-12 600-141-12 600MM005-13 -- -- -- 600-140-14 600-141-14 -- 600-140-15 600-141-15 600MM005-16 -- -- 600MM005-17 -- -- -- -- -- -- -- Series 805 -- -- -- 600-155-8 600-155-9 600-155-10 600-155-11 600-155-12 -- -- 600-155-15 -- -- 600-155-18 600-155-19 Add P for plug holder or R for receptacle holder, followed by polarizing position (N, X, Y, Z or U for universal keying). Add P for plug holder or R for receptacle holder, followed by polarizing position (A, B, C, D). Add P for plug holder or R for receptacle holder. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 20 E-Mail: sales@glenair.com Torque Wrenches 600B005 MIL-C-5015 and MIL-C-83723 Series II Plug and Receptacle Holder KIT - Complete Kit 600 Product Series B Connector Designator 005 - 16 Basic Number Shell Size (Omit for Kit) P - KIT Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C C A B RECEPTACLE HOLDER Shell Size 08 10 12 14 16 18 20 22 24 28 32 36 Max. Recommended Torque (Inch Pounds) 60 80 110 120 120 120 140 140 140 150 150 150 PLUG HOLDER A Dia. Max. .456 (11.6) .575 (14.6) .691 (17.6) .816 (20.7) .941 (23.9) 1.060 (26.9) 1.185 (30.1) 1.310 (33.3) 1.435 (36.4) 1.685 (42.8) 1.935 (49.1) 2.177 (55.3) B Dia. Max. .365 (9.3) .440 (11.2) .555 (14.1) .675 (17.1) .805 (20.4) .930 (23.6) 1.050 (26.7) 1.175 (29.8) 1.300 (33.0) 1.520 (38.6) 1.777 (45.0) 1.980 (50.3) C Dim. Max. 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) APPLICATION NOTES 1. Also mates with MIL-C-83723, Series II. 4. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 21 E-Mail: sales@glenair.com Torque Wrenches 600C005 MIL-C-22992 Plug and Receptacle Holder KIT - Complete Kit 600 Product Series C 005 - 18 Connector Designator Basic Number P - KIT Shell Size (Omit for Kit) Holder Type P - Plug Holder R - Receptacle Holder C Shell Size 12 14 16 18 20 22 24 28 32 36 C B A RECEPTACLE HOLDER PLUG HOLDER Max. Recommended Torque (Inch Pounds) 110 120 120 120 140 140 140 150 150 150 A Dia. Max. .824 (20.9) .950 (24.1) 1.058 (26.9) 1.183 (30.0) 1.315 (33.4) 1.425 (36.2) 1.683 (42.7) 1.931 (49.0) 2.183 (55.4) 2.445 (62.1) B Dia. Max. .552 (14.0) .677 (17.2) .802 (20.4) .927 (23.5) 1.053 (26.7) 1.177 (29.9) 1.302 (33.1) 1.521 (38.6) 1.771 (45.0) 1.990 (50.5) C Dim. Max. 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell size 12; 3/8" Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. 4. Consult Facrory for larger sizes. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 22 E-Mail: sales@glenair.com Torque Wrenches 600D005 MIL-C-26482 Series I and II, MIL-C-83723 Series I, and NAS 1599 Plug and Receptacle Holder KIT - Complete Kit 600 Product Series D 005 - 16 Connector Designator Basic Number Shell Size (Omit for Kit) P - KIT Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C Shell Size 08 10 12 14 16 18 20 22 24 C B A RECEPTACLE HOLDER PLUG HOLDER Max. Recommended Torque (Inch Pounds) Series I Series II 40 60 40 80 40 110 40 120 40 120 40 120 80 140 80 140 80 140 A Dia. Max. .478 (12.1) .599 (15.2) .758 (19.3) .882 (22.4) 1.007 (25.6) 1.133 (28.8) 1.257 (31.9) 1.382 (35.1) 1.507 (38.3) B Dia. Max. .358 (9.1) .486 (12.3) .598 (15.2) .723 (18.4) .848 (21.5) .948 (24.1) 1.073 (27.3) 1.198 (30.4) 1.323 (33.6) C Dim. Max. .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) APPLICATION NOTES 1. Also mates with MIL-C-83723, Series I; 40M39569. 4. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 23 E-Mail: sales@glenair.com Torque Wrenches 600E005 MIL-DTL-26500 and MIL-DTL-83723 Series III Plug and Receptacle Holder Polarization 6, 7, 8, 9, 10 - Polarization N - 1, 2, 3, 4, 5 600 Product Series E 005 - 16 Connector Designator Basic Number P Shell Size (Omit for Kit) KIT - Complete Kit N - KIT Holder Type P - Plug Holder R - Receptacle Holder C C Shell Size 08 10 12 14 16 18 20 22 24 28* B A RECEPTACLE HOLDER PLUG HOLDER A Dia. B Dia. Max. Recommended Max. Max. Torque (Inch Pounds) .537 (13.6) .424 (10.8) 60 .660 (16.8) .526 (13.4) 80 .830 (21.1) .696 (17.7) 110 .899 (22.8) .765 (19.4) 120 1.026 (26.1) .892 (22.7) 120 1.132 (28.8) .998 (25.3) 120 1.259 (32.0) 1.123 (28.6) 140 1.382 (35.1) 1.248 (31.7) 140 1.509 (38.3) 1.373 (34.9) 140 1.740 (44.2) 1.623 (41.2) 150 * Non-Military standard shell size C Dim. Max. 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 24 E-Mail: sales@glenair.com Torque Wrenches 600F005 MIL-C-27599 and MIL-C-38999 Series I Plug and Receptacle Holder KIT - Complete Kit 600 Product Series F 005 - 17 Connector Designator Basic Number Shell Size (Omit for Kit) P - KIT Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C C B A RECEPTACLE HOLDER Shell Size 09 11 13 15 17 19 21 23 25 Max. Recommended Torque (Inch Pounds) 40 40 40 40 40 40 80 80 80 PLUG HOLDER A Dia. Max. .577 (14.7) .709 (18.0) .829 (21.1) .954 (24.2) 1.107 (28.1) 1.190 (30.2) 1.315 (33.4) 1.440 (36.6) 1.565 (39.8) B Dia. Max. .438 (11.1) .566 (14.4) .678 (17.2) .803 (20.4) .928 (23.6) 1.033 (26.2) 1.158 (29.4) 1.283 (32.6) 1.408 (35.8) C Dim. Max. 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 25 E-Mail: sales@glenair.com Torque Wrenches 600FF005 MIL-C-38999 Series II Plug and Receptacle Holder KIT - Complete Kit 600 Product Series FF 005 - 16 Connector Designator Basic Number P - KIT Holder Type P - Plug Holder R - Receptacle Holder Shell Size (Omit for Kit) NO POLARIZATION REQUIRED C C Shell Size 08 10 12 14 16 18 20 22 24 B A RECEPTACLE HOLDER PLUG HOLDER Max. Recommended Torque (Inch Pounds) 40 40 40 40 40 40 80 80 80 A Dia. Max. .478 (12.1) .599 (15.2) .758 (19.3) .882 (22.4) 1.007 (25.6) 1.133 (28.8) 1.257 (31.9) 1.382 (35.1) 1.507 (38.3) B Dia. Max. .358 (9.1) .486 (12.3) .603 (15.3) .728 (18.5) .853 (21.7) .958 (24.3) 1.083 (27.5) 1.208 (30.7) 1.333 (33.9) C Dim. Max. .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) APPLICATION NOTES 1. Also mates with 40M38277. 4. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 26 E-Mail: sales@glenair.com Torque Wrenches 600G005 MIL-C-28840 Plug and Receptacle Holder Polarization 1, 2, 3, 4, 5, 6 600 Product Series G 005 - 17 Connector Designator Basic Number P Shell Size (Omit for Kit) KIT - Complete Kit 1 - KIT Holder Type P - Plug Holder R - Receptacle Holder C C Shell Size 11 13 15 17 19 23 25 29 33 B A RECEPTACLE HOLDER PLUG HOLDER Max. Recommended Torque (Inch Pounds) 80 110 120 120 120 140 140 150 150 A Dia. Max. .697 (17.7) .822 (20.8) .995 (25.3) 1.058 (26.9) 1.245 (31.6) 1.433 (36.4) 1.558 (39.6) 1.745 (44.3) 1.933 (49.1) B Dia. Max. .502 (12.8) .626 (15.9) .798 (20.3) .868 (22.0) 1.035 (26.3) 1.220 (31.0) 1.381 (35.1) 1.547 (39.3) 1.739 (44.2) C Dim. Max. .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) .945 (24.0) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 27 E-Mail: sales@glenair.com Torque Wrenches 600H005 MIL-C-38999 Series III Plug and Receptacle Holder Polarization N, A, B, C, D, E 600 Product Series H Connector Designator 005 - 17 Basic Number P Shell Size (Omit for Kit) KIT - Complete Kit N - KIT Holder Type P - Plug Holder R - Receptacle Holder C C Shell Size Com'l Mil. Ref. 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J B A RECEPTACLE HOLDER PLUG HOLDER Recommended Torque (+/- 5 Inch-Pounds) Metal Composite 60 35 80 35 110 40 120 40 120 40 120 40 140 80 140 80 140 80 A Dia. Max. .577 (14.7) .709 (18.0) .829 (21.1) .954 (24.2) 1.107 (28.1) 1.190 (30.2) 1.315 (33.4) 1.440 (36.6) 1.565 (39.8) B Dia. Max. .438 (11.1) .566 (14.4) .678 (17.2) .803 (20.4) .928 (23.6) 1.033 (26.2) 1.158 (29.4) 1.283 (32.6) 1.408 (35.8) C Dim. Max. 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. 4. Composite values apply when using Glenair 600-091, 600-157 or 600-007 tools. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 28 E-Mail: sales@glenair.com Torque Wrenches 600HH005 MIL-C-38999 Series IV Plug and Receptacle Holder KIT - Complete Kit 600 Product Series HH Connector Designator 005 - 17 Basic Number P - KIT Shell Size (Omit for Kit) Holder Type P - Plug Holder R - Receptacle Holder NO POLARIZATION REQUIRED C C A B PLUG HOLDER Shell Size Com'l Mil. Ref. 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J RECEPTACLE HOLDER Max. Recommended Torque (Inch Pounds) 80 110 120 120 120 140 140 140 A Dia. Max. .83 (21.1) .95 (24.1) 1.07 (27.2) 1.20 (30.5) 1.28 (32.5) 1.40 (35.6) 1.53 (38.9) 1.66 (42.2) B Dia. Max. .515 (13.1) .650 (16.5) .775 (19.7) .901 (22.9) 1.015 (25.8) 1.140 (29.0) 1.265 (32.1) 1.392 (35.4) C Dim. Max. 1.28 (32.5) 1.28 (32.5) 1.28 (32.5) 1.28 (32.5) 1.28 (32.5) 1.28 (32.5) 1.28 (32.5) 1.28 (32.5) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 11 and 13; 3/8" - Shell sizes 15 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 29 E-Mail: sales@glenair.com Torque Wrenches 600J005 MIL-C-81511 Series I Thru IV Plug and Receptacle Holder Polarization 1, 2, 3, 4, 5, 6 600 Product Series J Connector Designator 005 - 1F18 Dash Number Basic Number P 1 - KIT Holder Type P - Plug Holder R - Receptacle Holder KIT - Complete Kit C C B A RECEPTACLE HOLDER PLUG HOLDER Dash No. 1A08 1B10 1D14 1E16 1F18 1G20 1H22 1J24 Shell Size Com'l Mil. Ref. 08 A 10 B 14 D 16 E 18 F 20 G 22 H 24 J SERIES I & III Max. Recommended A Dia. Torque (Inch Pounds) Max. 40 .556 (14.1) 40 .681 (17.3) 40 .931 (23.6) 40 1.058 (26.9) 40 1.181 (30.0) 40 1.306 (33.2) 40 1.431 (36.3) 40 1.556 (39.5) B Dia. Max. .394 (10.0) .519 (13.2) .769 (19.5) .895 (22.7) 1.019 (25.9) 1.144 (29.1) 1.269 (32.2) 1.394 (35.4) C Dim. Max. .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) Dash No. 2A08 2B10 2D14 2E16 2F18 Shell Size Com'l Mil. Ref. 08 A 10 B 14 D 16 E 18 F SERIES II & IV Max. Recommended A Dia. Torque (Inch Pounds) Max. 40 .544 (13.8) 40 .669 (17.0) 40 .919 (23.3) 40 1.045 (26.5) 40 1.169 (29.7) B Dia. Max. .374 (9.5) .499 (12.7) .749 (19.0) .875 (22.2) .999 (25.4) C Dim. Max. .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) .950 (24.1) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10 and 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 30 E-Mail: sales@glenair.com Torque Wrenches 600L005 LN29729 (SJT) Plug and Receptacle Holder 600 L 005 - 16 Product Series Connector Designator Basic Number P Shell Size Holder Type P - Plug Holder R - Receptacle Holder C C A B RECEPTACLE HOLDER Shell Size 08 10 12 14 16 18 20 22 24 PLUG HOLDER Max. Recommended Torque (Inch Pounds) 40 40 40 40 40 40 80 80 80 A Dia. Max. .478 (12.1) .599 (15.2) .758 (19.3) .882 (22.4) 1.007 (25.6) 1.133 (28.8) 1.257 (31.9) 1.382 (35.1) 1.507 (38.3) B Dia. Max. .358 (9.1) .486 (12.3) .603 (15.3) .728 (18.5) .853 (21.7) .958 (24.3) 1.083 (27.5) 1.208 (30.7) 1.333 (33.9) C Dim. Max. .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) .910 (23.1) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 31 E-Mail: sales@glenair.com Torque Wrenches 600LL005 PATT 602 Plug and Receptacle Holder Polarization N, A, B, C, D, E, F 600 Product Series LL Connector Designator 005 - 16 Basic Number P Shell Size (Omit for Kit) KIT - Complete Kit N - KIT Holder Type P - Plug Holder R - Receptacle Holder C C B A RECEPTACLE HOLDER Shell Size 08 10 12 14 16 18 20 22 24 Max. Recommended Torque (Inch Pounds) 60 80 110 120 120 120 140 140 140 PLUG HOLDER A Dia. Max. .474 (12.0) .591 (15.0) .751 (19.1) .876 (22.3) 1.001 (25.4) 1.126 (28.6) 1.251 (31.8) 1.376 (35.0) 1.501 (38.1) B Dia. Max. .357 (9.1) .485 (12.3) .602 (15.3) .727 (18.5) .852 (21.6) .957 (24.3) 1.082 (27.5) 1.207 (30.7) 1.332 (33.8) C Dim. Max. .88 (22.4) .88 (22.4) .88 (22.4) .88 (22.4) .88 (22.4) .88 (22.4) .88 (22.4) .88 (22.4) .88 (22.4) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 32 E-Mail: sales@glenair.com Torque Wrenches 600U005 MIL-C-29600, DG123 and DG123A Plug and Receptacle Holder Polarization 1, 2, 3 600 Product Series U 005 - 17 Connector Designator Basic Number P Shell Size (Omit for Kit) KIT - Complete Kit 1 - KIT Kit Series A or B (See Table I or II) Holder Type P - Plug Holder R - Receptacle Holder C C A B RECEPTACLE HOLDER APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Case hardened carbon steel with electroless nickel finish. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 08, 10, 12; 3/8" - Shell sizes 14 and up. (c) 2008 Glenair, Inc. A PLUG HOLDER Shell Size 08 10 14 16 18 20 22 24 TABLE I - SERIES A Max. Recommended A Dia. B Dia. Torque (Inch Pounds) Max. Max. 40 .570 (14.5) .388 (9.9) 40 .690 (17.5) .513 (13.0) 40 .945 (24.0) .763 (19.4) 40 1.090 (27.7) .889 (22.6) 40 1.250 (31.8) 1.013 (25.7) 40 1.375 (34.9) 1.138 (28.9) 40 1.500 (38.1) 1.262 (32.1) 40 1.590 (40.4) 1.388 (35.3) C Dim. Max. 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) Shell Size 09 11 13 15 17 19 21 23 25 Max. Recommended Torque (Inch Pounds) 40 40 40 40 40 40 40 40 40 TABLE II - SERIES B A Dia. B Dia. Max. Max. .570 (14.5) .388 (9.9) .690 (17.5) .513 (13.0) .820 (20.8) .638 (16.2) .945 (24.0) .763 (19.4) 1.060 (26.9) .889 (22.6) 1.250 (31.8) 1.013 (25.7) 1.375 (34.9) 1.138 (28.9) 1.500 (38.1) 1.262 (32.1) 1.590 (40.4) 1.388 (35.3) C Dim. Max. 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) 1.09 (27.7) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 33 E-Mail: sales@glenair.com Torque Wrenches 600W005 Glenair GL4000 Series Connectors Plug and Receptacle Holder KIT - Complete Kit 600 Product Series W Connector Designator 005 - 16 Basic Number P - KIT Holder Type P - Plug Holder R - Receptacle Holder Shell Size (Omit for Kit) C C A B RECEPTACLE HOLDER PLUG HOLDER NO POLARIZATION REQUIRED Shell Size 10 12 14 16 18 20 22 24 28 Max. Recommended Torque (Inch Pounds) 40 40 50 50 60 70 80 100 140 A Dia. Max. .690 (17.5) .815 (20.7) .940 (23.9) 1.055 (26.8) 1.180 (30.0) 1.305 (33.1) 1.430 (36.3) 1.560 (39.6) 1.680 (42.7) B Dia. Max. .500 (12.7) .620 (15.7) .750 (19.1) .870 (22.1) .995 (25.3) 1.120 (28.4) 1.245 (31.6) 1.370 (34.8) 1.495 (38.0) C Dim. Max. 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 10 and 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 34 E-Mail: sales@glenair.com Torque Wrenches 600WW005 Glenair Series 22 Connectors Plug and Receptacle Holder C C A B RECEPTACLE HOLDER PLUG HOLDER KIT - Complete Kit 600 WW Product Series Connector Designator 005 - 16 Basic Number P Shell Size (Omit for Kit) N - KIT Polarization N, A, B, C, D, E Holder Type P - Plug Holder R - Receptacle Holder Shell Size 10 12 14 16 18 20 22 24 Max. Recommended Torque (Inch Pounds) 40 40 50 50 60 70 80 100 A Dia. Max. .705 (17.9) .830 (21.1) .955 (24.3) 1.070 (27.2) 1.195 (30.4) 1.320 (33.5) 1.445 (36.7) 1.570 (39.9) B Dia. Max. .496 (12.6) .620 (15.7) .750 (19.1) .870 (22.1) .995 (25.3) 1.120 (28.4) 1.245 (31.6) 1.370 (34.8) C Dim. Max. 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 3. Receptacle and plug holder drives: 1/4" - Shell sizes 10 and 12; 3/8" - Shell sizes 14 and up. 2. Material: Case hardened carbon steel with electroless nickel finish. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 35 E-Mail: sales@glenair.com Torque Wrenches 600-129 Torque Tool Hex Foot for Composite Coupling Nuts A Fit Hex Size Shown (See Note 1) .375 (9.5) D C .250 (6.4) Size 08-11 .375 (9.5) Size 12-38 (See Note 2) B 600 - 129 - 16 Product Series Basic Number Jaw Size Order No. (See Table I) TABLE I: JAW SIZE ORDER NUMBER Order No. 08 10 12 14 16 18 20 22 24 28 Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28 A Hex .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 2.000 (50.8) B Ref 1.250 (31.8) 1.380 (35.1) 1.630 (41.4) 1.750 (44.5) 1.880 (47.8) 2.000 (50.8) 2.130 (54.1) 2.250 (57.2) 2.380 (60.5) 2.750 (69.9) C Ref 1.000 (22.1) 1.120 (28.4) 1.380 (35.1) 1.500 (38.1) 1.630 (41.4) 1.810 (46.0) 1.880 (47.8) 1.940 (49.3) 2.000 (50.8) 2.130 (54.1) Recommended D Coupling Torque Ref Inch/Pounds Newton-Meters .625 (15.9) 35 [4.0] .687 (17.4) 35 [4.0] .812 (20.6) 40 [4.5] .875 (22.2) 40 [4.5] .937 (23.8) 40 [4.5] 1.000 (25.4) 40 [4.5] 1.062 (27.0) 80 [9.0] 1.125 (28.6) 80 [9.0] 1.187 (30.1) 80 [9.0] 1.312 (33.3) 120 [13.5] APPLICATION NOTES 1. Hex accommodates Coupling Nut with size shown. 4. Newton-Meters [nm] are indicated in brackets. 2. Square accommodates Standard Square Socket Tools for Composite Coupling Nut. 5. Actual torque to part is affected by D offset. Apply approximately 35 Inch Lbs [4] to achieve 40 Inch Lbs [4.5]; 70 Inch Lbs [8] for 80 Inch Lbs [9]; and 100 Inch Lbs [13] for 120 Inch Lbs [13.5] recommended torque to parts. 3. Metric Dimensions (mm) are indicated in parentheses. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 36 E-Mail: sales@glenair.com Torque Wrenches TG37 MIL-DTL-26500 and MIL-DTL-83723 Series III Connector Wrench TG37 - 14 Basic Part Number Polarization Table II N - Normal 6,7,8,9 or 10 = Alternates N Shell Size 5.625 (142.9) Approx. A A GLENAIR, INC. APPLICATION NOTES .75 (19.1) Approx. 1. Metric dimensions (mm) are indicated in parentheses. B 2. Material: Aluminum alloy with electroless nickel finish. .375 (9.5) Approx .75 (19.1) Approx. C TABLE II Shell Size TABLE I Shell Size A Dim 3. Wrench has been designed to be used with both threaded and bayonet style connectors. B Dia C Dia 8, 10 Position A B C D NORMAL 105 140 215 265 6 102 132 248 320 7 80 118 230 312 8 35 140 205 275 8 1.250 (31.8) 0.424 (10.8) 0.428 (10.9) 10 1.250 (31.8) 0.528 (13.4) 0.530 (13.5) 9 64 155 234 304 12 1.250 (31.8) 0.896 (22.8) 0.700 (17.8) 10 25 115 220 270 14 2.000 (50.8) 0.765 (19.4) 0.769 (19.5) NORMAL 105 140 215 265 16 2.000 (50.8) 0.892 (22.7) 0.896 (22.8) 6 18 149 192 259 18 2.000 (50.8) 0.998 (25.3) 1.002 (25.5) 7 92 152 222 342 20 2.000 (50.8) 1.123 (28.5) 1.127 (28.6) 8 84 152 204 334 22 2.000 (50.8) 1.248 (31.7) 1.252 (31.8) 9 24 135 199 240 24 2.000 (50.8) 1.373 (34.9) 1.377 (35.0) 10 98 152 268 338 (c) 2008 Glenair, Inc. 12, 14, 16, 18, 20, 22, 24 CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 37 E-Mail: sales@glenair.com Torque Wrenches TG38 MIL-C-5015 and MIL-C-83723 Series II Connector Wrench TG38 - 20 APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. Basic Part Number Dash Number 2. Material: Aluminum alloy with electroless nickel finish. D 5.625 (142.9) Approx. D GLENAIR, INC. C B .375 (9.5) Approx A Thread E Dash Shell No. Size 8 8, 8S 10 10S, 10SL 12 12, 12S 14 14, 14S 16 16, 16S 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 44 44 48 48 (c) 2008 Glenair, Inc. A Thread Class 2A 1/2 -28 UNEF 5/8 -24 UNEF 3/4 -20 UNEF 7/8 -20 UNEF 1 -20 UNEF 1 1/8 -18 UNEF 1 1/4 -18 UNEF 1 3/8 -18 UNEF 1 1/2 -18 UNEF 1 3/4 -18 UNS 2 -18 UNS 2 1/4 -16 UN 2 1/2 -16 UN 2 3/4 -16 UN 3 -16 UN B Approx. .687 (17.4) .687 (17.4) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) C Approx. .718 (18.2) .718 (18.2) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) CAGE Code 06324 D Dia. .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) E Dia. Ref. .375 (9.5) .450 (11.4) .565 (14.4) .685 (17.4) .815 (20.7) .940 (23.9) 1.060 (26.9) 1.185 (30.1) 1.317 (33.5) 1.530 (38.9) 1.780 (45.2) 1.995 (50.7) 2.245 (57.0) 2.500 (63.5) 2.750 (69.9) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 38 E-Mail: sales@glenair.com Torque Wrenches TG39 MIL-C-26482 Series I and II, MIL-C-83723 Series I, and NAS 1599 Connector Wrench TG39 - 20 Basic Part Number Dash Number 5.625 (142.9) Approx. A A GLENAIR, INC. .375 (9.5) Approx B Shell Size 8 10 12 14 16 18 20 22 24 (c) 2008 Glenair, Inc. A Dim. .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) B Dia. Ref. .362 (9.2) .490 (12.4) .607 (15.4) .732 (18.6) .857 (21.8) .962 (24.4) 1.087 (27.6) 1.212 (30.8) 1.337 (34.0) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 39 E-Mail: sales@glenair.com Torque Wrenches TG47 MIL-C-22992 Connector Wrench TG47 - 20 Basic Part Number Shell Size 5.625 (142.9) Approx. A A .75 (19.1) Approx. .75 (19.1) Approx. Shell Size 12 14 16 18 20 22 24 28 32 36 A Dim. .062 (1.6) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) (c) 2008 Glenair, Inc. GLENAIR, INC. B Male .375 (9.5) Approx Female C B Dia. Ref. .554 (14.1) .674 (17.1) .804 (20.4) .929 (23.6) 1.052 (26.7) 1.177 (29.9) 1.302 (33.1) 1.522 (38.7) 1.772 (45.0) 1.982 (50.3) C Dia. Ref. .567 (14.4) .692 (17.6) .817 (20.8) .942 (23.9) 1.068 (27.1) 1.192 (30.3) 1.317 (33.5) 1.536 (39.0) 1.786 (45.4) 2.005 (50.9) CAGE Code 06324 APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 40 E-Mail: sales@glenair.com Torque Wrenches TG48 MIL-C-38999 Series II Connector Wrench TG48 - 20 Basic Part Number Shell Size 5.625 (142.9) Approx. A A GLENAIR, INC. .385 (9.8) Max. .390 (9.9) Max. .375 (9.5) Approx B Shell Size 8 10 12 14 16 18 20 22 24 (c) 2008 Glenair, Inc. A Dim. .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) B Dia. Ref. .362 (9.2) .490 (12.4) .607 (15.4) .732 (18.6) .857 (21.8) .962 (24.4) 1.087 (27.6) 1.212 (30.8) 1.337 (34.0) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 41 E-Mail: sales@glenair.com Torque Wrenches TG52 MIL-C-81511 Series II and IV Connector Wrench TG52 - 14 Basic Part Number Shell Size 1 Polarization 1, 2, 3, 4, 5, 6 (Omit for Normal) 5.625 (142.9) Approx. A A .75 (19.1) Approx. .75 (19.1) Approx. Shell Size 8 10 14 16 18 (c) 2008 Glenair, Inc. A Dim. .062 (1.6) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) B .375 (9.5) Approx C B Dia. Ref. .382 (9.7) .507 (12.9) .757 (19.2) .883 (22.4) 1.007 (25.6) C Dia. Ref. .386 (9.8) .511 (13.0) .761 (19.3) .887 (22.5) 1.011 (25.7) CAGE Code 06324 APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 42 E-Mail: sales@glenair.com Torque Wrenches TG60 MIL-C-27599 and MIL-C-38999 Series I Connector Wrench TG60 - 15 Basic Part Number Shell Size 5.625 (142.9) Approx. A A GLENAIR, INC. .612 (15.5) Max. C .375 (9.5) Approx B Shell Size 9 11 13 15 17 19 21 23 25 (c) 2008 Glenair, Inc. A Dim. Ref. 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) B Dia. Ref. .442 (11.2) .570 (14.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.042 (26.5) 1.167 (29.6) 1.292 (32.8) 1.417 (36.0) C Max .647 (16.4) .647 (16.4) .647 (16.4) .647 (16.4) .647 (16.4) .647 (16.4) .617 (15.7) .617 (15.7) .617 (15.7) CAGE Code 06324 APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 43 E-Mail: sales@glenair.com Torque Wrenches TG61 MIL-C-81511 Series I and III Connector Wrench TG48 - 20 Basic Part Number Shell Size 1 Polarization 1, 2, 3, 4, 5, 6 (Omit for Normal) 5.625 (142.9) Approx. A Sq. GLENAIR, INC. B .375 (9.5) Approx C Shell Size 08 10 14 16 18 20 22 24 A Dim. .062 (1.6) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) (c) 2008 Glenair, Inc. B Dia. Ref. .378 (9.6) .503 (12.8) .751 (19.1) .877 (22.3) 1.001 (25.4) 1.126 (28.6) 1.251 (31.8) 1.376 (35.0) C Dia. Ref. .407 (10.3) .532 (13.5) .782 (19.9) .908 (23.1) 1.032 (26.2) 1.157 (29.4) 1.282 (32.6) 1.407 (35.7) CAGE Code 06324 APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 44 E-Mail: sales@glenair.com Torque Wrenches TG83 (LN29729) Wrench for SJT Connectors TG38 - 20 Basic Part Number Shell Size 5.625 (142.9) Approx. A A GLENAIR, INC. .626 (15.9) Max. .632 (16.1) Max. .375 (9.5) Approx B Shell Size 8 10 12 14 16 18 20 22 24 (c) 2008 Glenair, Inc. A Dim. .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) B Dia. Ref. .362 (9.2) .490 (12.4) .607 (15.4) .732 (18.6) .857 (21.8) .962 (24.4) 1.087 (27.6) 1.212 (30.8) 1.337 (34.0) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Wrench handle and sockets Aluminum alloy with electroless nickel finish. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 45 E-Mail: sales@glenair.com Torque Wrenches TG90 MIL-C-38999 Series III Connector Wrench TG90 - 15 Basic Part Number Shell Size A Polarization A, B, C, D, E (Omit for Normal) 5.625 (142.9) Approx. A Sq. GLENAIR, INC. B .375 (9.5) Approx C Shell Size 09 11 13 15 17 19 21 23 25 (c) 2008 Glenair, Inc. A Dim. .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) B Dia. Ref. .438 (11.1) .566 (14.4) .678 (17.2) .802 (20.4) .928 (23.6) 1.032 (26.2) 1.155 (29.3) 1.283 (32.6) 1.407 (35.7) C Dia. Ref. .441 (11.2) .569 (14.5) .682 (17.3) .811 (20.6) .931 (23.6) 1.037 (26.3) 1.162 (29.5) 1.288 (32.7) 1.411 (35.8) CAGE Code 06324 APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material: Aluminum alloy with electroless nickel finish. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 46 E-Mail: sales@glenair.com Banding Tools The BAND-IT(R) Clamping System Fast, Cost-Effective Shielding Termination The BAND-IT(R) clamping system provides quick, easy, cost-effective and highly reliable termination of braided metallic shielding or fabric braid. Combined with Glenair's vast selection of connector accessories, braided shielding, cable, convoluted tubing, flexible metal core conduit, adapters, transitions, Geo-Marine(R) and special connectors, you have everything needed to design and build complete cable assemblies, wire harnesses and conduit systems. Manual Hand Tool Reliable RFI/EMI/EMP Terminations The unique low profile and smooth inside diameter of the one-piece type 304 austenitic stainless steel clamping band virtually eliminates RFI/EMI/EMP leakage paths. The lock maintains constant tension under extreme environmental conditions. BAND-IT(R) has passed severe shock, vibration and thermal cycle testing with negligible deterioration of shell conductivity. Single Piece Band Construction No welding, soldering, magna forming, and no crimping! The clamping bands provide quick, easy and cost-effective shielding terminations. (Note: Bands must be double-coiled.) Pneumatic Clamping Tool Clamp Small Diameters Easily, Reliably Double-wrapped, the clamping band is designed to clamp small diameters as easily, quickly and reliably as large diameters. Quick, Easy Field Terminations with the Precalibrated Hand Tool Bands - Available Flat or Precoiled The precalibrated hand tool is lightweight and pocket-sized, affording fast braided RFI/EMI/EMP shield termination in the field. Pneumatic Banding Tool for High-Speed Mass Production The pneumatic clamping tool offers the capability to tackle high volume braided shielding terminations quickly and easily. Completed Termination Assembly Instructions on Page 50 BAND-IT, Tie-Dex and Tie-Dex II are registered trademarks of BAND-IT IDEX, Inc. Geo-Marine is a registered trademark of Glenair, Inc. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 47 E-Mail: sales@glenair.com Banding Tools 600-052, 600-090, 600-057, 600-083 600-052-1, 600-090-1, 600-057-1 & 600-083-1 Clamping Bands Standard Band 600-052 and Precoiled Standard Band 600-052-1 Tail Length Indicator Mark .350 (8.9) Ref. .240 (6.1) Ref. 14.256 .030 (362.1 0.8) .156 (4.0) Ref. .020 (0.5) Ref. .074 (1.9) Ref. The 600-052 Standard Band is precision constructed of 300 Series SST/Passivate I.A.W. AMS 2700 and designed for use with the 600-058 Hand Banding Tool or the 600-067 Pneumatic Banding Tool. Double-wrapped bands will accommodate diameters up to approximately 1.8 inches (45.7). Bands may be ordered flat (600-052) or precoiled (600-052-1). Bands come bagged and tagged in quantities from 1 to 100. Reference: BAND-IT(R) part number A10086 Extended-Length Standard Band 600-090 & Precoiled Extended-Length Standard Band 600-090-1 Tail Length Indicator Mark .350 (8.9) Ref. .240 (6.1) Ref. 18.0 .030 (457.2 0.8) .156 (4.0) Ref. .020 (0.5) Ref. .074 (1.9) Ref. The 600-090 Extended Length Standard Band is precision constructed of 300 Series SST/Passivate I.A.W. AMS 2700, and designed for use with the 600-058 Hand Banding Tool or the 600-067 Pneumatic Banding Tool. Double-wrapped bands will accommodate diameters up to approximately 2.5 inches (63.5). Bands may be ordered flat (600-090), or precoiled (600-090-1). Bands come bagged and tagged in quantities from 1 to 100. Reference: BAND-IT(R) part number A11086 Micro-Band 600-057 Precoiled Micro-Band 600-057-1 Tail Length Indicator Mark .195 (5.0) Ref. .120 (3.0) Ref. 8.125 .030 (206.4 0.8) .090 (2.3) Ref. .015 (0.4) Ref. .053 (1.9) Ref. The 600-057 Micro Band is precision constructed of 300 Series SST/Passivate I.A.W. AMS 2700, and designed for use with the 600-061 Hand Banding Tool or the 600-068 Pneumatic Banding Tool. Double-wrapped bands will accommodate diameters up to approximately .88 inches (22.4). Bands may be ordered flat (600-057), or precoiled (600-057-1). Bands come bagged and tagged in quantities from 1 to 100. Reference: BAND-IT(R) part number A31186 Extended Length Micro-Band 600-083 Precoiled Micro-Band 600-083-1 Tail Length Indicator Mark .195 (5.0) Ref. .120 (3.0) Ref. 14.25 .030 (362.0 0.8) .090 (2.3) Ref. .053 (1.9) Ref. .015 (0.4) Ref. The 600-083 Extended Length Micro-Band is precision constructed of 300 Series SST/Passivate I.A.W. AMS 2700, and designed for use with the 600-061 Hand Banding Tool or the 600-068 Pneumatic Banding Tool. Double-wrapped bands will accommodate diameters up to approximately 1.88 inches (47.8). Bands may be ordered flat (600-083), or precoiled (600-083-1). Bands come bagged and tagged in quantities from 1 to 100. Reference: BAND-IT(R) part number A31086. Metric dimensions (mm) are indicated in parentheses. Consult factory for diameters above 2.5 inches (63.5). (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 48 E-Mail: sales@glenair.com Banding Tools 600-058 and 600-061 Hand Banding Tools Hand Banding Tool 600-058 6.75 (171.5) The 600-058 Hand Banding Tool weighs 1.18 lbs., and is designed for standard clamping bands 600-052 and 600-090 (see page 36) in a tension range from 100 to 180 lbs. Calibrate at 150 lbs. 5 lbs. For most shield terminations. Tool and band should never be lubricated. Reference: BAND-IT(R) part number A40199. Hand Micro Banding Tool 600-061 6.75 (171.5) The 600-061 Hand Micro Banding Tool weighs 1.18 lbs., and is designed for micro clamping bands 600-057 and 600-083 (see page 36) in a tension range from 50 to 85 lbs. Calibrate at 80lbs 5 lbs. For most shield terminations. Tool and band should never be lubricated. Reference: BAND-IT(R) part number A30199. Metric Dimensions (mm) are indicated in parentheses. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 49 E-Mail: sales@glenair.com Banding Tools 600-082, 600-056, 600-060 & 600-062 Banding Tool Replacement Parts Kits .690 (17.5) 600-082 Cutter Knife The 600-082 Cutter Knife replaces the cutter knife on the 600-061 Hand Banding Tool, and the 600-068 Pneumatic Banding Tool. Material is heat treated steel finished with black oxide and rust preventative. .122 (3.1) Dia. .246 (6.2) Dia. Reference: BAND-IT(R) part number A48087 600-060-1 Micro Cut-Off Blade Kit PIN (1 Each) The 600-060-1 Micro Cut-Off Blade Kit for Serial Numbers up to 20999 consists of the blade, two E-rings and one pin, providing all parts needed to replace the cut-off blade on the 600-061 Hand Micro Banding Tool and the 600-068 Pneumatic Micro Banding Tool. Material is heat treated steel finished with black oxide and rust preventative. .250 (6.4) .370 (9.4) Ref. 1.000 (25.4) .125 (3.2) Dia. Ref. E-RING (2 Each) .135 (3.4) .015 .002 (0.4 0.1) .230 (5.8) Dia. .093 .002 (2.4 0.1) Reference: BAND-IT(R) part number A43999. 600-060-2 Ref. BAND-IT(R) P/N A47899 for Serial Numbers 21000 and above. PIN (2 Each) .250 (6.4) 1.000 (25.4) Pin 1: .540 (13.7) Pin 2: .450 (11.4) .125 (3.2) Dia. Ref. E-RING (2 Each) .270 (6.9) .015 .002 (0.4 0.1) 600-056 Cut-Off Blade Kit .230 (5.8) Dia. .093 .002 (2.4 0.1) The 600-056 Cut-Off Blade Kit consists of the blade, two E-rings and one pin, providing all parts needed to replace the cut-off blade on the 600-058 Hand Banding Tool and the 600-067 Pneumatic Banding Tool. Material is heat treated steel finished with black oxide and rust preventative. Reference: BAND-IT(R) part number A40699. 600-062 Cutter Knife .250 (6.4) Dia. Ref. .688 (17.5) Ref. The 600-062 Cutter Knife for Serial Numbers up to 16589 replaces the cutter knife on the 600-058 Hand Banding Tool and the 600-067 Pneumatic Banding Tool. Material is heat treated steel finished with black oxide and rust preventative. Reference: BAND-IT(R) part number A40788. 600-062-1 for Serial Numbers 16590 and above. Reference: BAND-IT(R) part number A67787. Metric Dimensions (mm) are indicated in parentheses. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 50 E-Mail: sales@glenair.com Banding Tools 600-067 & 600-068 Pneumatic Banding Tools 6.88 (174.8) 600-067 Tie-Dex II Pneumatic Standard Banding Tool (R) 2.25 (57.2) 3.14 (79.8) The 600-067 Tie-Dex II(R) Standard Banding Tool accommodates standard 600-052 and 600-090 bands (see page 36) in a tension range of from 100-180 lbs. Calibrate at 150 lbs. 5 lbs for most shield terminations. Weight of the tool is 2.52 lbs (1.14 Kg); the control box weighs 2.74 lbs (1.24 Kg). 3.00 (76.2) Control Box Pneumatic Tool NOTE: Hoses typically can extend to approximately 10 feet (3.65 meters). 5.00 (127.0) Reference: BAND-IT(R) part number A35199. 4.85 (123.2) 600-068 Tie-Dex II Pneumatic Micro Banding Tool 3.14 (79.8) The 600-068 Tie-Dex II(R) Pneumatic Micro Banding Tool accommodates 600-057 and 600-083 Micro Bands (see page 36) in a tension range of from 50 to 80 lbs. Calibrate at 75 lbs. +2 lbs. -7 lbs. for most shield terminations. Weight of the tool is 2.52 lbs (1.14 Kg); the control box weighs 2.74 lbs (1.24 Kg). 3.00 (76.2) Control Box Pneumatic Tool NOTE: Hoses typically can extend to approximately 10 feet (3.65 meters). 5.00 (127.0) Reference: BAND-IT(R) part number A35599. 4.85 (123.2) Metric Dimensions (mm) are indicated in parentheses. (c) 2008 Glenair, Inc. 6.88 (174.8) 2.25 (57.2) (R) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 51 E-Mail: sales@glenair.com Banding Tools 600-086 & 600-072 Field Tool Kits Tension Gauge 600-086 Tie-Dex II(R) Micro-Tool Kit Calibration Key Cutters Foam Cut-Out Replacement Parts Tension Gauge Hand Banding Tool The 600-086 Tie-Dex II(R) Micro-Tool Kit contains the 600-061 Hand Micro Banding Tool, the 600-086-1 Tension Gauge, Cutters for clamp removal, 600055 Calibration Adjustment Key, and 600-060 Replacement Parts (Cut-off Blade Kit). The tension gauge is used to calibrate tool to 80 lbs. 2 lbs. Complete with rugged 12.00 in. x 8.75 in. x 4.00 in. (304.8 x 222.3 x 101.9mm) foam padded carrying case and operator's manual. Reference: BAND-IT(R) part number A59099. 600-072 Tie-Dex II(R) Tool Kit Calibration Key Cutters Foam Cut-Out Replacement Parts Operator's Manual Operator's Manual Hand Banding Tool The 600-072 Tie-Dex II(R) Tool Kit contains the 600-058 Hand Banding Tool, the 600-072-1 Tension Gauge, Cutters for clamp removal, 600-055 Calibration Adjustment Key, and 600056 Replacement Parts (Cut-off Blade Kit). The tension gauge is used to calibrate tool to 150 5 lbs. Complete with rugged 12.00 in. x 8.75 in. x 4.00 in. (304.8 x 222.3 x 101.9mm) foam padded carrying case and operator's manual. Reference: BAND-IT(R) part number A49099. Metric Dimemsions (mm) are indicated in parentheses. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 52 E-Mail: sales@glenair.com Banding Tools 600-055 Calibration Key and 600-072-1 Standard and 600-086-1 Micro Gauges 3.00 (76.2) Ref. 600-055 Calibration Key The 600-055 Calibration Key is designed for use with the 600-061 and 600-058 Hand Banding Tools. Material is black anodized aluminum alloy. One full turn clockwise will advance the tension range by 25 lbs., and a counter-clockwise turn will decrease tension by the same amount. Recommended for purchase with 600-072-1 and 600-086-1. 1.75 (44.5) Ref. .50 (12.7) Reference: BAND-IT(R) part number A44699. 600-072-1 Standard Tension Gauge .375 (9.5) Approx. Calibration Sticker .875 (22.2) Red Red Green Green .875 (22.2) The 600-072-1 Tension Gauge is used to check and calibrate the Tie-Dex II(R) standard hand tool to values noted on calibration sticker. Constructed of hardened steel, the gauge's accuracy is within 2 lbs. 2.0 (50.8) 3.34 (84.8) Reference: BAND-IT(R) part number A48599. 600-086-1 Micro Tension Gauge .375 (9.5) Approx. Calibration Sticker .875 (22.2) Red Red Green Green .875 (22.2) 3.34 (84.8) 2.0 (50.8) The 600-086-1 Micro Tension Gauge is used to check and calibrate the TieDex II(R) micro hand tool to values noted on calibration sticker. Constructed of hardened steel, the gauge's accuracy is within 2 lbs. Reference: BAND-IT(R) part number A47599. Metric Dimensions (mm) are indicated in parentheses. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 53 E-Mail: sales@glenair.com Banding Tools 600-074 Pneumatic Banding Tool Foot Pedal Control, and 600-065 Calibration Kit for All Banding Tools 600-074 Foot Pedal Control for 600-067 and 600-068 Pneumatic Banding Tools The 600-074 Foot Pedal Control frees both hands to help assure more accurate, reliable and faster shield terminations. Reference: BAND-IT(R) part number A37099. 600-065 Calibration Kit For All Banding Tools 1 2&3 The 600-065 Calibration Kit includes the (1) 600-065-3 Calibration Device, (2) Fifty 600065-2 Micro Test Bands, (3) Fifty 600-065-1 Standard Test Bands, (4) 600-055 Calibration Key, and the (5) 600-065-4, (6) 600-065-5 and (7) 600-065-6 Mounting Bracket Kits. Range of the Calibration Device is 60 to 170 lbs, and accuracy is calibrated to 2 lbs. at factory. Dimensions: 6.65 in. x 2.47 in. x 2.83 in. (168.9 x 62.7 x 71.9mm). Weight: 2.10 lbs. (1.0Kg). 6&7 4 5 Reference: BAND-IT(R) part number A50099. Metric Dimensions (mm) are indicated in parentheses. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 54 E-Mail: sales@glenair.com Banding Tools Backshell Shield Termination Assembly Instructions Shield Termination Assembly Process 1. Prepare Cable Braid for termination process (Figure 1). 2. Push Braid forward over Adapter Retention Lip to the Adapter Incline Point (or .4" [10.2mm] minimum braid length). Milk Braid as required to remove slack and insure a snug fit around the shield termination area (Figure 2). 3. Prepare the Band in the following manner: IMPORTANT: Due to Connector/Adapter circumference, it may be necessary to prepare the Band around the Cable or Retention Area. A. Roll Band through the Buckle Slot twice. (Bands must be double-coiled.) B. Pull on Band until Mark ( ) is within approximately .250 inch (6.4mm) of Buckle Slot (Figure 3). The Band may be tightened further if desired. NOTE: Prepared Band should have ( ) Mark visible approximately where shown in Figure 3. Adapter Retention Lip Conductors Braid Adapter Incline 1 .400 (1.2mm) Min Length Braid Over Termination Area 2 Tail Length Indicator Mark Buckle 3 4 Shield Termination Clamping Process (Figures 4 thru 8) NOTE: To free Tool Handles, move Holding Clips to center of Tool. 4. Squeeze Gripper Release Lever and insert Band into the front end opening of the Tool. (NOTE: Circular portion of looped band must always face downward.) 5. Aligning the Band and Tool with the Shield Termination Area, squeeze Black Pull-Up Handle repeatedly using short strokes until it locks against Tool Body. (This indicates the Band is compressed to the Tool Precalibrated Tension.) NOTE: If alignment of band and shield is unsatisfactory, tension on band can be relaxed by pushing on slotted release lever on top of tool. Make adjustments as necessary and again squeeze black pull-up handle. 6. Complete the Clamping Process by squeezing the Gray Cut-Off Handle. 7. Remove excess band from tool and dispose. 8. Inspect Shield Termination. (c) 2008 Glenair, Inc. 5 6 7 8 IMPORTANT: Always roll band through the buckle slot twice (see Step 3). Bands must be double-coiled to function correctly. The failure to roll the band through the buckle slot twice is the most common user error in band style terminations. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 55 E-Mail: sales@glenair.com Banding Tools 600-164 Large Broad Blade Utility Shear for Cutting AmberStrand(R) and Braided Metal Shielding Also Cuts Rubber, Cable Jacketing, Cable, Plastics and Rope 600 - 164 Product Series Basic Number Nickel Chrome Plating Resists Corrosion and Rusting Recommended AmberStrand(R) Cutting Procedure Broad, Short Jaws Provide Powerful Cutting Action Extended Handle Provides Comfort and Cutting Leverage High Leverage Provides Powerful Cutting Action for Light Metals, Rubber and Heavy Fabrics Note: When cutting braid, both metal and especiallly composite, open cutter blades to allow the full 2" cut. Place braid all the way back onto blades as shown. Cuts Rubber, Cables, Light Metal, Wire Metal Screens and Braided EMI/EMP Shielding, Cordage, Plastics and Rope Weight: 0.55 Pounds Shear Cut Length: 2.000 (51.0) APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Always wear approved eye protection. 3. Never use on or near live electrical circuits. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 56 E-Mail: sales@glenair.com Good Things Come In Small Packages And at Glenair, They Ship the Same Day T ired of long lead times for F/O connectors and contacts? Then consider the Glenair difference: We've placed our products in stock, in quantity, and ready for immediate shipment--including both our MILT-29504 qualified pin and socket termini as well as our unique front release 181-011 and 181-012 designs. Consider as well Glenair's "no minimum order" policy and our lightning fast turnaround on quotes for price and delivery. At Glenair, we're committed to keeping our products, programs and services current with your every need. 1211 Air Way Glendale, California 91201-2497 Telephone: 818-247-6000 * Facsimilie: 818-500-9912 * EMail: sales@glenair.com United States * United Kingdom * England * Nordic * France * Italy * www.glenair.com Spain * Japan Fiber Optic Tools & Kits Fiber Optic Assembly, Termination and Termini Polishing Tools PRODUCT FEATURES Test Probe Polishing Tools Complete Fiber Optic Termination Kits for Field and Factory Use Cleaning Swabs Instruction Sheets No-Nic Strippers Specialty Tooling for All Termination Operations BAND-IT(R) Shield Termination System Glenair: One Stop Shopping for all Your Fiber Optic Interconnection System Tooling Requirements The Right Fiber Optic Tool for the Job Fiber optic connectors are designed to be connected and disconnected many times without affecting the optical performance of the fiber circuit. Key to this performance is the error-free termination of the contact terminus to the fiber circuit--a task which requires the use of a wide range of specialized tooling. Glenair's extensive experience in building fiber optic interconnect cables has enabled us to select the right tools for each step in the termination and assembly process. Our Fiber Optic Termination and Test Probe Kits allow field technicians the convenience of completing final termination of precision termini on location for easy and efficient cable routing and installation. Each kit contains pin and socket polishing tools, jacket strippers, shears, scribes--literally all the tools and supplies required for ongoing termination and test of fiber optic systems. Polishing tools are also sold seperately for factory use or as replacement parts in field termination kits. A History of Meeting the Industries Interconnect Tooling Requirements Glenair manufactures many of the specialty tools used in high-reliability interconnect harness assembly. And we are distributors for a wide range of tooling from the industry's other leading suppliers. In addition to our own line of banding tools and connector/backshell assembly tools, Glenair is able to supply custom tool kits and workstations for a broad range of interconnect applications and working environments. We offer custom tool labeling and packaging and same day availability on both individual tool part numbers as well as kits. For more information please consult the factory or visit us at www.glenair.com. The BAND-IT(R) Shield Termination System The BAND-IT(R) Clamping System provides quick, easy and highly-reliable termination of braided shielding or fabric braid. Glenair has designed banding platforms into a number of our specialized fiber optic backshells and conduit adapters. Individual clamping tools, bands and kits are available. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 58 E-Mail: sales@glenair.com Fiber Optic Tools & Kits 187-017 Glenair Fiber Optic Termination Kit for MIL-PRF-29504/4 & /5 Termini (181-001 & 002) Turn-Key Termination of MIL-PRF-29504/04 and /05 Fiber Termini Singlemode or Multimode 110 Volt or 220 Volt Complete Kit With All Tools, Instruments and Consumables Power Meter LED Source 200X Microscope Polishing Media Curing Oven Hand Tools Epoxies, Wipes and Swabs Portable "Fiber Optic Lab In A Box" for Field Termination and Repair of D38999 Optical Interconnects Our termination kit allows field technicians the convenience of on-site optical fiber termination. Each kit contains jacket strippers, polishing tools, hand tools, light source, power meter and microscope as well as a full complement of consumables including epoxy, polishing media, swabs and adhesives. Key Components Optical Power Meter Battery-Operated (c) 2008 Glenair, Inc. LED Source Battery-Operated Curing Oven CAGE Code 06324 200X Microscope Battery-Operated Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 59 E-Mail: sales@glenair.com Fiber Optic Tools & Kits 187-017 Glenair Fiber Optic Termination Kit for MIL-PRF-29504/4 & /5 Termini (181-001 & 002) PARTS LIST FOR USE WITH GLENAIR MIL-PRF-29504/4 & /5 (181-001 & 002) TERMINI Mode MM - Multimode SM - Single Mode 187 - 017 - 110 Product Series Basic Number MM Voltage 110, 220 NOTE: Parts list shown for reference only and may change due to part availability. (c) 2008 Glenair, Inc. Item No. Part Description Quantity 1 Terminus Procedure (Laminated) 1 2 Pin Termini for 62.5/125 Fiber (181-002-126) 10 10 3 Socket Termini for 62.5/125 Fiber (181-001-126) 4 Polishing Tool, Pin Terminus (181-001P) 1 5 Polishing Tool, Socket Terminus (181-001S) 1 6 Terminus Swabs (Glenair 50/Pkg) (187-024) 1 7 Spare Ceramic Alignment Sleeve (181-001-S) 10 8 Plastic Dust Cover, ST (2.5 mm Dia) (F.I.S.) 10 9 Plastic Dust Cover, Termini (.062" Dia) (CAPLUG) 10 10 Hard Shell Tool Case with Foam (Fibertron) 1 11 Custom Diecut Foam Insert (CHI Case) 1 12 Multi-Cure Oven with Curing Block (9050) (Fibertron) 1 13 D38999 Ferrules Curing Block (Fibertron) 1 14 Microscope, 200X (Noyes) 1 15 Microscope Adapter for D38999 (Noyes) 1 16 Scribe, Fiber (Fibertron) 1 17 Kevlar Shear (Clauss) 1 18 No-Nic Stripper, Gold (Clauss) 1 19 No-Nic Stripper, Blue (Clauss) 1 20 Autocleaner (Netpec) 1 21 Jacket Stripper, T5 (Clauss) 1 22 Alcohol Dispenser, 4 Oz. (F.I.S.) 1 23 Ruler, 6" (Fibertron) 1 24 Diamond Polishing Film, 9 Microm, 6 x 6 (3M) 4 25 Diamond Polishing Film, 3 Micron, 6 x 6 (3M) 6 26 Diamond Polishing Film, 1 Micron, 6 x 6 (3M) 6 27 Resilient Rubber Pad (3M) 1 28 Glass Polishing Plate, 8" x 8" (Fibertron) 1 29 Cleaning Wire (F.I.S.) 1 30 Compressed Air (Fibertron) 1 31 Kim-Wipes (Kimberly-Clark) 1 32 Continuity Test, ST (F.I.S.) 1 33 Epoxy Applicator (Syringe) (Fibertron) 10 34 Mini Foam Swab, 2.5 mm (F.I.S.) 50 35 Tra-Bound Adhesive (Tra-Con) 10 36 Insert/Removal Tool 5 37 LED Source W.D38999 Aptr, 1300nm Wvlngth (Rifocs) 1 38 Power Meter W/D38999 Aptr, 1300nm Wvlngth (Rifocs) 1 39 ST Adapter for Power meter (Rifocs) 1 40 ST Adapter for LED Source (Rifocs) 1 41 Instant Adhesive (Loctite Corp.) 1 CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 60 E-Mail: sales@glenair.com Fiber Optic Tools & Kits 187-018 Glenair Fiber Optic Termination Kit for Front Release 181-011 & -012 Termini PARTS LIST Item No. Part Description 181-011 & 181-012 Terminus Priocedure (Laminated) 1 2 Pin Termini for 62.5/125 Fiber (181-012-126) 10 10 3 Socket Termini for 62.5/125 Fiber (181-011-126) 4 Polishing Tool, Pin, Front Release (182-005P) 1 5 Polishing Tool, Socket, Front Release (182-005S) 1 6 Terminus Swabs (Glenair 50/Pkg) (187-045) 1 7 Plastic Dust Cover, ST (2.5 mm Dia) (F.I.S.) 10 8 Plastic Dust Cover, Termini (.062" Dia) (CAPLUG) 10 9 Hard Shell Tool Case with Foam (Fibertron) 1 10 Custom Diecut Foam Insert (CHI Case) 1 11 Multi-Cure Oven with Curing Block (9050) (Fibertron) 1 12 D38999 Ferrules Curing Block (Fibertron) 1 13 Microscope, 200X (Noyes) 1 14 Microscope Adapter for D38999 (Noyes) 1 15 Scribe, Fiber (Fibertron) 1 16 Kevlar Shear (Clauss) 1 17 No-Nic Stripper, Gold (Clauss) 1 18 No-Nic Stripper, Blue (Clauss) 1 19 Autocleaner (Netpec) 1 20 Jacket Stripper, T5 (Clauss) 1 21 Alcohol Dispenser, 4 Oz. (F.I.S.) 1 22 Ruler, 6" (Fibertron) 1 23 Diamond Polishing Film, 9 Microm, 6 x 6 (3M) 4 24 Diamond Polishing Film, 3 Micron, 6 x 6 (3M) 6 25 Diamond Polishing Film, 1 Micron, 6 x 6 (3M) 6 26 Resilient Rubber Pad (3M) 1 27 Glass Polishing Plate, 8" x 8" (Fibertron) 1 28 Cleaning Wire (F.I.S.) 1 29 Compressed Air (Fibertron) 1 30 Kim-Wipes (Kimberly-Clark) 1 31 Continuity Test, ST (F.I.S.) 1 32 Epoxy Applicator (Syringe) (Fibertron) 10 33 Mini Foam Swab, 2.5 mm (F.I.S.) 50 34 Tra-Bound Adhesive (Tra-Con) 10 35 LED Source W/D38999 Aptr, 1300nm Wvlngth (Rifocus) 1 36 Power Meter W/D38999 Aptr, 1300nm Wvlngth (Rifocus) 1 37 ST Adapter for Power meter (Rifocus) 1 38 Crimp Tool for 181-011 & 181-012 Termini (Kitco F.O.) 1 39 ST Adapter for LED Source (Rifocus) 1 40 Terminus Removal Tool, Front Release (Kitco) 1 41 Alignment Sleeve Removal Tool (Kitco) 1 (c) 2008 Glenair, Inc. FOR USE WITH GLENAIR FRONT-RELEASE 181-011 & 012 TERMINI Quantity 1 CAGE Code 06324 Mode MM - Multimode SM - Single Mode 187 - 018 - 110 Product Series Basic Number MM Voltage 110, 220 NOTE: Parts list shown for reference only and may change due to part availability. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 61 E-Mail: sales@glenair.com Fiber Optic Tools & Kits 182-001 Polishing Tool for 181-001 and 181-002 Termini 182 - 001 Product Series Basic Number S S - Socket P - Pin W W - Wet Polish Tool Supplied (Omit for Dry Polish) .320 (8.1) Max P 1.500 (38.1) DIA S 1.500 (38.1) DIA .550 (14.0) Max APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Assembly packaged in plastic bag and tag identified with manufacturer's name and part number. 3. Material/Finish: Stainless steel/passivated. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 62 E-Mail: sales@glenair.com Fiber Optic Tools & Kits 182-002 Polishing Tool for 181-006 Test Probe 182 - 002 Product Series Basic Number W W - Wet Polish Tool Supplied with V-Grooves (Omit for Dry Polish) 1.500 (38.1) DIA .940 (23.9) DIA APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Assembly packaged in plastic bag and tag identified with manufacturer's name and part number. 3. Material/Finish: Stainless steel/passivated. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 63 E-Mail: sales@glenair.com Fiber Optic Tools & Kits 182-005 Polishing Tool for 181-011 and 181-012 Termini, Front Release 182 - 005 Product Series Basic Number S S - Socket P - Pin W W - Wet Polish Tool Supplied with V-Grooves (Omit for Dry Polish) .740 (18.8) P 1.500 (38.1) DIA .480 (12.2) S 1.500 (38.1) DIA APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. 2. Assembly packaged in plastic bag and tag identified with manufacturer's name and part number. 3. Material/Finish: Stainless steel/passivated. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 64 E-Mail: sales@glenair.com Fiber Optic Tools & Kits 187-024 Cleaning Swab for Glenair Fiber Optic Termini 187 - 024 Basic Number Product Series Glenair has developed this cleaning swab which allows the cleaning of recessed difficult-to-clean socket termini. The swab's foam tip is the perfect size to clean both the alignment sleeve and the glass core area of the fiber. 6.300 (160.0) (6.3) .500 (.50) (12.7) 187-024 187-024 isISsupplied SUPPLIED WITH5050swabs SWABS/BAG with per bag 1.250 mm mmFOAM Foam 1.25 Glenair Recommends the Following Procedure for Cleaning Glenair Fiber Optic Termini: 1. Remove loose contamination with a dry swab. 2. Blow pressurized, filtered air (or instrument grade canned air) onto terminus end face. 3. Inspect end face using 10X magnification minumum. 4. If contamination is still present, take the following measures: A. Soak swab foam tip with 99%+ pure alcohol. B. Wipe the wet swab across the terminus end face. C. Wipe a dry swab across the terminus end face immediately to guard against potential air-dried alcohol film residue. (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 65 E-Mail: sales@glenair.com Fiber Optic Tools & Kits GBS1000 and GBS1001 Portable Fiber Optic Video Bore Scope Inspection System Field/Bench Use System Includes Video Display Unit, Inspection Camera and Standard 2.5 mm & 1.25 mm Patchcord Inspection Tips Tips available Use with all Common F/O Connector Types: SC, LC, ST, and FC plus Mil-Dtl-38999 and Small Form Factor Connectors 200X and 400X Magnification Built-in NiMH Rechargeable Battery with Automatic Shut-off Function Rugged Watertight Case NOTE: Consult factory for D38999, M28876 and other military/ruggedized connector types. Glenair Video Inspection System Provides The Ultimate Solution to Field Maintenance of Fiber Optic Systems Dirty or contaminated fiber optic contacts (termini) can seriously degrade the performance of a fiber optic system. But inspecting individual contacts in complex connector devices such as bulkhead feedthroughs and multi-channel Mil-Spec connectors can be a difficult and time-consuming task. The Glenair video inspection system supplies everything you need to quickly and conveniently inspect and clean buttjointed fiber optic contacts. Optional add-ons enable turnkey integration with computer desktops, digital cameras and powerful optical test software. How To Order GBS1000-U Basic Part Number Includes: * Handheld Inspection Monitor Optional Quick Capture USB Module for Computer Inspection and Video Capture. * Inspection Probe (200x & 400x) * Portable Ruggedized Carrying Case * Glenair Swabs (c) 2008 Glenair, Inc. Fiber check software can be downloaded from: http://www.westoverfiber.com CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 66 E-Mail: sales@glenair.com Fiber Optic Tools & Kits GBS1000 and GBS1001 Portable Fiber Optic Video Bore Scope Inspection System GBS1000 SPECIFICATIONS GBS1001 SPECIFICATIONS Dimensions 1.8" W x 1.7" H x 5.5" L Weight .11 Kg / .25 lb Weight 4.08 oz / 115.6 gms Resolution Better than 1.5 Microns Video Output NTSC or PAL Cable Light Source Blue LED 1000,000+ hour life Integrated USB 2.0 coil cable 2.5' relaxed, 10.5' fully extended Lighting Technique Coaxial Certification CE Warranty 1 year Attenuation Filter 2 mm thick Schott KG1 Camera type .33" CCD GBS1001 Inspection Probe with USB Adapter and Fiber Chek 2 Software* Fiber Chek Software Fiber Optic Analysis Program* Fiber Chek is an integrated hardware/software package engineered with the single purpose of critically and consistently grading fiber end-faces. Works hand in hand with the Quick Capture Analog Probe for visual inspection, taking pictures and testing fibers. GBS1001 * Automatic debris and defect detection, including fine scratches Basic Part Number Includes: * Measures epoxy ring for out-of-tolerance conditions * Inspection Probe with USB Adapter * Inspection results, including image data, can be printed or archived * Fiber Chek 2 Software The GBS1001 is the only inspection probe today with a high resolution, all digital sensor and USB2 video stream which delivers high-resolution uncompressed images directly to your personal computer. * Utilizes industry standards or user defined threshold settings *Fiber Chek software can be downloaded from http://www.westoverfiber.com. APPLICATION NOTES 1. Glenair's handheld Bore Scope is a small, lightweight video microscope used to examine fiber optic end-faces. The GBS1000 displays a clear and concise live image with the ability to view fibers at either 200x or 400x magnifications. 3. The dual magnification mode inherent in all Fiber Chek 2 platforms provides a large, easily centered image during handheld focusing. This greatly simplifies your ability to achieve a quality image. A high-magnification image is acquired, analyzed, and graded. 2. The Quick Capture GBS1000-U USB Module can be added to the GBS1000. This valuable item allows the user to inspect and capture fiber end-faces on your PC. Works great with Fiber Chek software to inspect, test and capture images. To order separately, use part number GMP-002. (c) 2008 Glenair, Inc. 4. Fiber Chek 2 software can analyze several zones of the fiber end-face. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 67 E-Mail: sales@glenair.com Fiber Optic Tools & Kits GCB1000, GCB2000 and GCB3000 Fiber Optic CleanBlast(R) Cleaning Systems for Fiber Optic Connectors Faster, More Effective and Less Costly than using Swabs or other Cleaning Methods Excellent at Removing-Instead of Spreading-Debris and Oils around the Ferrule Surface Complete Selection of Tips Available Cost per Cleaning Cycle: One Cent! Rugged Watertight Case Optional Add-Ons for PC Optical Testing of MIL-PRF-29504 Termini with Quick Capture Analog Probe (6-4 pin Converter) and FiberChek Software. Complete CleanBlast(R) Inspection System CleanBlast(R) Basic Kit (With Monitor) (Without Monitor) GCB2000 GCB1000-U Basic Part Number Includes: * Portable CleanBlast(R) with LCD Monitor and Inspection Probe in Ruggedized Case Laboratory Bench Model GCB3000-M Basic Part Number Includes: Basic Part Number Includes: * Universal 2.5 mm Bulkhead Cleaning Tip * Portable CleanBlast(R) * Glenair Swabs * Glenair Swabs Optional Digital Mounting Monitor with Inspection Probe and 2.5 mm & 1.25 mm Patch Cord Inspection Tips * 2.5 mm and 1.25 mm Patch Cord Inspection Tips * Universal 2.5 mm Bulkhead Cleaning Tip * Glenair Swabs Optional Quick Capture Analog Probe with 6 Pin to 4 Pin Converter (Omit for None) GCB3000 SPECIFICATIONS Fiber Chek Software Fiber Optic Analysis Program* Fiber Chek is an integrated hardware/software package engineered with the single purpose of critically and consistently grading fiber end-faces. Works hand in hand with the Quick Capture Analog Probe for visual inspection, taking pictures and testing fibers on your PC. * * * * Automatic debris and defect detection, including fine scratches Measures epoxy ring for out-of-tolerance conditions Inspection results, including image data,can be printed or archived Utilizes industry standards or user defined threshold settings *Fiber Chek software can be downloaded from http://www.westoverfiber.com. (c) 2008 Glenair, Inc. CAGE Code 06324 Power Requirements 110 VAC-220 VAC, 2 amp Dimensions 8"L x 9"W x 7"D Weight 12 lb Air Source External, compressed air or nitrogen; regulated between 60 - 250 psi Cleaning Cycle Time .8 seconds Certification CE Approved GCB1000 and GCB2000 SPECIFICATIONS Power Requirements 110 VAC-220 VAC, 2 amp Dimensions 16"L x 13"W x 7"D Weight 21 lb Air Source 40 psi Internal Compressor Cleaning Cycle Time 5 seconds Certification CE Approved Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 68 E-Mail: sales@glenair.com Fiber Optic Tools & Kits GTK1000 Glenair Fiber Optic Testing Kit for Front Release 181-011 & -012 Termini Fiber Size (See Table I) GTK1000 - B - A Type of Meter Connection: A - ST Connector B - FC Connector C - SC Connector E - Customer Defined Basic Part Number Includes: * Power and Source Meters (Several Options) * 4 Test Probes (3 Meters Long) * Test Probe Feedthrough TABLE I: FIBER SIZE Symbol Fiber Size A 100/140u B 62.5/125u C 50/125u D 200/300u E 9.3 Singlemode F Customer Defined Custom test kits available upon request; consult factory for unique part number. APPLICATION NOTES 1. Traditional optical test harnesses are expensive and easily contaminated in normal use. Glenair's test probe, in conjunction with our precise-mating test adapter, offers a complete solution to optical test and measurement. The GTK1000 comes with a power meter, source meter, test probes and a test probe calibrator. (c) 2008 Glenair, Inc. 2. For accurate results, the test probe calibrator will "zero out" your meters. 3. Glenair's patented test probe design provides less than 1.0 dB insertion loss, are used with test probe adapters and a calibration feedthrough, and accommodates all standard fiber sizes and several connection options. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 69 E-Mail: sales@glenair.com Earth Bonding Glenair Earth Bonding System Introduction Overall Features and Performance (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 70 E-Mail: sales@glenair.com Earth Bonding Glenair Earth Bonding System Typical Performance Values (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 71 E-Mail: sales@glenair.com Earth Bonding Glenair Earth Bonding System Male Earth Bonds Selection Chart and Dimensions A Selection Chart Earth Bond Dimensions E B D C Dimensions shown in parenthesis is approximate stud length from top of flange after setting Part Number A B C D E Weight PC 80923 16o 21 (26) 4.5 4.5 11.5o 16g 80974 16o 13 (18) 4.5 4.5 11.5o 14g 16g 80925 16o 24 (27) 3.5 11 8.5o 80975 16o 16 (19) 3.5 11 8.5o 14g 80924 25o 24 (31) 5.5 4.5 19.0o 50g 80926 25o 28 (31) 3.5 11 13.5o 42g 80958 16o 21 (26) 4.5 4.5 11.5o 12g 80976 16o 13 (18) 4.5 4.5 11.5o 12g 80960 16o 24 (27) 3.5 11 10.5o 15g 80977 16o 16 (19) 3.5 11 10.5o 15g 80959 25o 24 (31) 5.5 4.5 19.0o 34g 80961 25o 28 (31) 3.5 11 15.0o 36g 81929 20o 15 (20) 4.5 4.5 15.0o 29g 81928 20o 19 (21) 3.5 11 11.5o 26g 81931 20o 15 (20) 5.5 4.5 15.0o 19g 81930 20o 19 (21) 3.5 11 13.5.o 26g Earth Bonds for use with Steel & Stainless Plate Part Number Plate Thickness Torque Value 80923 Thread Size M6 Hole Size o 11.5 /11.7mm 1.5 - 4mm 8 Nm 80925 M6 8.5 /8.7mm > 4mm 80974 M6 11.5 /11.7mm 1.5 - 4mm 80975 M6 8.5 /8.7mm > 4mm 81929 M8 15.0 /15.2mm 1.5 - 4mm 81928 M8 11.5 /11.7mm > 4mm 15 Nm PMT8 80924 M10 19.0/19.2mm 2 - 4mm 34 Nm PMT10 80926 M10 13.5/13.7mm > 4mm 34 Nm PMT10 8 Nm 8 Nm Setting Tool PMT6/PMTC6 PMT6/PMTC6 PMTC6 8 Nm PMTC6 15 Nm PMT8 Earth Bonds for use with Aluminium Plate Part Number Thread Size Plate Thickness Torque Value 80958 M6 Hole Size o 11.5/11.7mm 1.5 - 4mm 8 Nm Setting Tool PMT6/PMTC6 80960 M6 10.5/10.7mm > 4mm 8 Nm PMT6/PMTC6 80976 M6 11.5/11.7mm 1.5 - 4mm 8 Nm PMTC6 80977 M6 10.5/10.7mm > 4mm 8 Nm PMTC6 81931 M8 15.0/15.2mm 1.5 - 4mm 15 Nm PMT8 81930 M8 13.5/13.7mm > 4mm 15 Nm PMT8 80959 M10 19.0/19.2mm 2 - 4mm 34 Nm PMT10 80961 M10 15.0/15.2mm > 4mm 34 Nm PMT10 Hydraulic Setting Tool Part Number Pulling Force Weight Length Optional Test Gauge PMT6 10KN 1,28 kg 185mm 80928 PMTC6 10KN 1,28 kg 185mm 80928 PMT8 18KN 1,28 kg 185mm 80928 PMT10 25KN 1,28 kg 185mm 80928 Pneumatic Setting Tool (c) 2008 Glenair, Inc. Part Number Pulling Force Weight Dimensions PMA10 Adjustable 9 - 28KN 3,70 kg L270 x B140 x H320 CAGE Code 06324 Application Earth Bonds: M6, M8, M10 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 72 E-Mail: sales@glenair.com Earth Bonding Glenair Earth Bonding System Female Earth Bonds Selection Chart and Dimensions (c) 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 73 E-Mail: sales@glenair.com Tired of searching for the right size and type of connector holding tool? Why not just buy the whole kit and save yourself the headache? G lenair makes plug and receptacle holders for virtually every size and type of military standard circular connector. We even make a set of universal holding tools that work on any key position within a specific military connector series (call the factory for details). So really there is no excuse for not having the right tool for the job when you need it. And Glenair kits provide a nice, safe storage space for your tools when they are not in use. So the next time you make up your mind to purchase connector and backshell assembly tools, why not just save yourself time and money and order a complete kit? Our operators are standing by. 1211 Air Way Glendale, California 91201-2497 Telephone: 818-247-6000 * Facsimilie: 818-500-9912 * EMail: sales@glenair.com United States * United Kingdom * England * Nordic * France * Italy * www.glenair.com Spain * Japan Four Reasons to Add Glenair to Your Short List of Suppliers: First and foremost you need availability. Third, you need convenience in ordering. Are the products and components you need either in stock or able to be manufactured in a short period of time? Glenair has built its reputation on fast turnaround. We maintain the world's largest inventory of connector accessories and deliver faster turnaround on quotes and orders than anyone else in our business. Today, Glenair is changing the way the interconnect industry operates: from a long lead-time, custom order problem; to a fast response, in-stock solution. From connector accessories to fiber optic termini, Glenair is the "same-day" leader. Do your current suppliers insist on quantity or dollar minimums whenever you place an order? Are their products available only from distributors with limited product knowledge and equally limited shelf stock? Is it hard to get samples when and where you need them? Do you get charged expediting fees for accelerated production? If your answer to any of these questions is yes, we encourage you to consider Glenair, where complete convenience in ordering has been a guiding principle since 1956. Second, you need capacity. Can the supplier respond to your evolving requirements with the factory capacity and labor necessary to meet every demand--from one piece to one hundred thousand? Glenair has built the largest capacity, broadest capability factory in the interconnect accessory industry. We have the knowledge, experience and equipment necessary to handle any production requirement, no matter how large or complex, and the manpower to tackle even the most aggressive production schedules. Finally, you need top quality products backed by outstanding technical support. At Glenair, we've made product quality and worldwide technical support a major part of our approach to earning your trust and loyalty. We've established an unsurpassed sales, support and engineering presence in every major market in the world. And we've designed quality into every product we ship, by applying the experience and expertise gained from over 50 years in the business. In every respect, our formula for serving the fiber optic interconnect customer is identical to the "best-value" service model we've relied on to maintain our leadership position in our core, connector accessory business: * Same-Day Delivery on Our Most Popular Part Numbers * No Price or Quantity Minimums * Lightning-Fast Turnaround on Quotes for Price and Delivery * Outstanding Application Engineering and Worldwide Technical Support Index Part Number Index and Table of Contents Introduction: Backshell to Connector Assembly Tools Backshell to Connector Assembly Tools.......3 EMI Shield Termination Tools: The BAND-IT(R) System..............................6 Interconnect System Tooling Glossary..........7 Backshell Assembly Wrenches, Pliers and Kits 600-006, 600-079 & 600-102 Circular Backshell Assembly Wrenches and Repacement Insert Pads..........................9 600-091 Composite-Hex Coupling Wrench.....................................10 600-157 Composite-Hex Coupling Wrench.....................................11 TG70 Strap Wrench....................................12 Plug and Receptacle Holders, & Torque Wrenches TG69 Soft Jaw Pliers, TG80 Tool Kit and TG82 Strap Wrench.................................13 600-004, 600-007, 600-076 and 600-077 Torque Wrenches......................14 600-161 Digital Torque Wrench and 600-162 Bench Stand...................15 Series 80 "Mighty Mouse" Jam Nut Spanner and Connector Holding Tool...................16 600B005 MIL-DTL-5015 and MIL-DTL-83723 Series II Plug and Receptacle Holder...................................17 600C005 MIL-DTL-22992 Plug and Receptacle Holder...................................18 600D005 MIL-DTL-26482 Series I and II, MIL-DTL-83723 Series I, and NAS 159.....19 600E005 MIL-DTL-26500 and MIL-DTL-83723 Plug and Receptacle Holder..................................................20 600F005 MIL-DTL-27599 and MIL-DTL-38999 Series I Plug and Receptacle Holder...................................21 600FF005 MIL-DTL-38999 Series II Plug and Receptacle Holder.................22 600G005 MIL-DTL-28840 Plug and Receptacle Holder...................................23 600H005 MIL-DTL-38999 Series III Plug and Receptacle Holder............................24 600HH005 MIL-DTL-38999 Series IV Plug and Receptacle Holder............................25 (c) 2008 Glenair, Inc. 600J005 MIL-DTL-81511 Series I Thru IV Plug and Receptacle Holder....................26 600L005 LN29729 (SJT) Plug and Receptacle Holder....................................27 600LL005 PATT 602 Plug and Receptacle Holder............................28 600U005 MIL-DTL-29600, DG123 and DG123A Plug and Receptacle Holder...29 600W005 Glenair GL4000 Series Connectors Plug and Receptacle Holder...................................30 600WW005 Glenair Series 22 Connectors Plug and Receptacle Holder....................31 600-129 Torque Tool Hex Foot for Composite Coupling Nuts........................32 TG37 MIL-DTL-26500 and MIL-DTL-83723 Series III Connector Wrench..................................33 TG38 MIL-DTL-5015 and MIL-DTL-83723 Series 2 Connector Wrench.....................34 TG39 MIL-DTL-26482 Series I and II, MIL-DTL-83723 Series I, and NAS 1599 Connector Wrench..................35 TG47 MIL-DTL-22992 Connector Wrench.....................................36 TG48 MIL-DTL-38999 Series II Connector Wrench..................................37 TG52 MIL-DTL-81511 Series II and IV Connector Wrench..................................38 TG60 MIL-DTL-27599 and MIL-DTL-38999 Series I Connector Wrench..................................39 TG61 MIL-DTL-81511 Series I and III Connector Wrench..................................40 TG83 (LN29729) Connector Wrench for SJT Connectors.......................................41 TG90 MIL-DTL-38999 Series III Connector Wrench..................................42 Backshell Assembly Wrenches, Pliers and Kits The BAND-IT(R) Clamping System............43 600-052,600-052-1, 600-090, 600-090-1, 600-057, 600-057-1, 600-083 and 600-083-1 Clamping Bands....................44 600-058 and 600-061 Hand Banding Tools................................45 600-082, 600-056, 600-060 & 600-062 Banding Tool Replacement Parts Kits...46 CAGE Code 06324 600-067 & 600-068 Pneumatic Banding Tools........................47 600-086 & 600-072 Field Tool Kits..........48 600-055 Calibration Key, 600-072-1 and 600-086-1 Tension Gauges..................49 600-074 Pneumatic Banding Tool Foot Pedal Control, and 600-065 Calibration Kit...........................50 Backshell Shield Termination Assembly Instructions...................................51 600-164 Large Broad Blade Utility Shear for Cutting Braided EMI/EMP Shielding.......52 Fiber Optic Tool Kits, Polishing and Cleaning Systems Fiber Optic Assembly, Termination and Termini Polishing Tools...........................54 187-017 Glenair Fiber Optic Termination Kit for MIL-PRF-29504/4 & /5 Termini (181-001 & 002).......................................55 187-018 Glenair Fiber Optic Termination Kit for Front Release 181-011 & -012 Termini.........................57 182-001 Polishing Tool for 181-001 and 181-002 Termini...................................58 182-002 Polishing Tool for 181-006 Test Probe...............................................59 182-005 Polishing Tool for 181-011 and 181-012 Termini, Front Release...........60 187-024 Cleaning Swab for Glenair Fiber Optic Termini....................61 GBS1000 and GBS1001 Portable Fiber Optic Video Bore Scope Inspection System......................... ........62 GCB1000, GCB2000 and GCB3000 Fiber Optic CleanBlast(R) Connector Cleaning System....................64 GTK1000 Fiber Otic Testing Kit for Front Release 181-011 and 181-012 Termini.......................................65 Glenair Earth Bonding System Introduction, Overall Features.....................66 Typical Performance values........................67 Male Earth Bonds Selection Chart..............68 Female Earth Bonds Selection Chart.......69 Index Part Number Index.................................70 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com 76 E-Mail: sales@glenair.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Glenair: 600-078-01 G62748-11 TG37-106 TG37-109 TG37-10N TG37-12N TG37-14 TG37-146 TG37-147 TG37-149 TG37-14N TG37-16 TG37-166 TG37-16N TG37-18 TG37-186 TG37-187 TG37-188 TG37-18N TG37-206 TG37207 TG37-208 TG37-20N TG37-22 TG37-226 TG37-227 TG37-22N TG37-246 TG37-247 TG37-248 TG37-249 TG37-24N TG37-86 TG37-87 TG37-88 TG37-8N TG38-10 TG38-10W TG38-12W TG38-14 TG38-14W TG3816W TG38-18W TG38-20W TG38-22W TG38-24 TG38-24W TG38-28 TG38-28W TG38-32 TG38-32W TG38-36 TG38-40 TG39-10 TG39-12 TG39-14 TG39-16 TG39-18 TG39-20 TG39-22 TG39-24 TG39-8 TG47-24 TG4732 TG48-10 TG48-10-39 TG48-12 TG48-14 TG48-16 TG48-18 TG48-20 TG48-22 TG48-24 TG48-8 TG48-KIT TG52-18-2 TG90-11 TG90-11B TG90-11C TG90-11D TG90-11E TG90-13 TG90-13A TG90-13C TG90-13E TG90-15 TG90-15A TG90-15B TG90-15C TG90-15D TG90-15E TG90-17 TG90-17A TG90-17B TG90-17C TG90-17D TG90-17E TG90-19 TG90-19A TG90-19B