Si8660/61/62/63 Data Sheet Low Power Six-Channel Digital Isolator KEY FEATURES Silicon Lab's family of ultra-low-power digital isolators are CMOS devices offering substantial data rate, propagation delay, power, size, reliability, and external BOM advantages over legacy isolation technologies. The operating parameters of these products remain stable across wide temperature ranges and throughout device service life for ease of design and highly uniform performance. All device versions have Schmitt trigger inputs for high noise immunity and only require VDD bypass capacitors. Data rates up to 150 Mbps are supported, and all devices achieve propagation delays of less than 10 ns. Ordering options include a choice of isolation ratings (1.0, 2.5, 3.75 and 5 kV) and a selectable fail-safe operating mode to control the default output state during power loss. All products >1 kVRMS are safety certified by UL, CSA, VDE, and CQC, and products in wide-body packages support reinforced insulation withstanding up to 5 kVRMS. Automotive Grade is available for certain part numbers. These products are built using automotive-specific flows at all steps in the manufacturing process to ensure the robustness and low defectivity required for automotive applications. Industrial Applications * Industrial automation systems * Medical electronics * Isolated switch mode supplies * Isolated ADC, DAC * Motor control * Power inverters * Communication systems Safety Regulatory Approvals * UL 1577 recognized * Up to 5000 VRMS for 1 minute * CSA component notice 5A approval * IEC 60950-1, 62368-1, 60601-1 (reinforced insulation) * VDE certification conformity * VDE 0884-10 * EN60950-1 (reinforced insulation) * CQC certification approval * GB4943.1 silabs.com | Building a more connected world. Automotive Applications * On-board chargers * Battery management systems * Charging stations * Traction inverters * Hybrid Electric Vehicles * Battery Electric Vehicles * High-speed operation * DC to 150 Mbps * No start-up initialization required * Wide Operating Supply Voltage * 2.5-5.5 V * Up to 5000 VRMS isolation * 60-year life at rated working voltage * High electromagnetic immunity * Ultra low power (typical) * 5 V Operation * 1.6 mA per channel at 1 Mbps * 5.5 mA per channel at 100 Mbps * 2.5 V Operation * 1.5 mA per channel at 1 Mbps * 3.5 mA per channel at 100 Mbps * Schmitt trigger inputs * Selectable fail-safe mode * Default high or low output (ordering option) * Precise timing (typical) * 10 ns propagation delay * 1.5 ns pulse width distortion * 0.5 ns channel-channel skew * 2 ns propagation delay skew * 5 ns minimum pulse width * Transient Immunity 50 kV/s * AEC-Q100 qualification * Wide temperature range * -40 to 125 C * RoHS-compliant packages * SOIC-16 wide body * SOIC-16 narrow body * QSOP-16 * Automotive-grade OPNs available * AIAG compliant PPAP documentation support * IMDS and CAMDS listing support Rev. 1.72 Si8660/61/62/63 Data Sheet Ordering Guide 1. Ordering Guide Table 1.1. Ordering Guide for Valid OPNs 1,2, 3 Ordering Part Number (OPN) Number of Inputs VDD1 Side Number of Inputs VDD2 Side Max Data Rate (Mbps) Default Output State Isolation Rating (kV) Temp (C) Package Si8660BB-B-IU 6 0 150 Low 2.5 -40 to 125 C QSOP-16 Si8660EB-B-IU 6 0 150 High 2.5 -40 to 125 C QSOP-16 Si8661BB-B-IU 5 1 150 Low 2.5 -40 to 125 C QSOP-16 Si8661EB-B-IU 5 1 150 High 2.5 -40 to 125 C QSOP-16 Si8662BB-B-IU 4 2 150 Low 2.5 -40 to 125 C QSOP-16 Si8662EB-B-IU 4 2 150 High 2.5 -40 to 125 C QSOP-16 Si8663BB-B-IU 3 3 150 Low 2.5 -40 to 125 C QSOP-16 Si8663EB-B-IU 3 3 150 High 2.5 -40 to 125 C QSOP-16 Si8660BA-B-IS1 6 0 150 Low 1.0 -40 to 125 C NB SOIC-16 Si8660BB-B-IS1 6 0 150 Low 2.5 -40 to 125 C NB SOIC-16 Si8660BC-B-IS1 6 0 150 Low 3.75 -40 to 125 C NB SOIC-16 Si8660EC-B-IS1 6 0 150 High 3.75 -40 to 125 C NB SOIC-16 Si8660BD-B-IS 6 0 150 Low 5.0 -40 to 125 C WB SOIC-16 Si8660ED-B-IS 6 0 150 High 5.0 -40 to 125 C WB SOIC-16 Si8661BB-B-IS1 5 1 150 Low 2.5 -40 to 125 C NB SOIC-16 Si8661BC-B-IS1 5 1 150 Low 3.75 -40 to 125 C NB SOIC-16 Si8661EC-B-IS1 5 1 150 High 3.75 -40 to 125 C NB SOIC-16 Si8661BD-B-IS 5 1 150 Low 5.0 -40 to 125 C WB SOIC-16 Si8661ED-B-IS 5 1 150 High 5.0 -40 to 125 C WB SOIC-16 Si8661BD-B-IS2 5 1 150 Low 5.0 -40 to 125 C WB SOIC-16 (8 mm creepage)4 Si8662BB-B-IS1 4 2 150 Low 2.5 -40 to 125 C NB SOIC-16 Si8662BC-B-IS1 4 2 150 Low 3.75 -40 to 125 C NB SOIC-16 Si8662EC-B-IS1 4 2 150 High 3.75 -40 to 125 C NB SOIC-16 Si8662BD-B-IS 4 2 150 Low 5.0 -40 to 125 C WB SOIC-16 Si8662ED-B-IS 4 2 150 High 5.0 -40 to 125 C WB SOIC-16 Si8663BB-B-IS1 3 3 150 Low 2.5 -40 to 125 C NB SOIC-16 Si8663BC-B-IS1 3 3 150 Low 3.75 -40 to 125 C NB SOIC-16 Si8663EC-B-IS1 3 3 150 High 3.75 -40 to 125 C NB SOIC-16 Si8663BD-B-IS 3 3 150 Low 5.0 -40 to 125 C WB SOIC-16 QSOP-16 Packages SOIC-16 Packages silabs.com | Building a more connected world. Rev. 1.72 | 2 Si8660/61/62/63 Data Sheet Ordering Guide Ordering Part Number (OPN) Number of Inputs VDD1 Side Number of Inputs VDD2 Side Max Data Rate (Mbps) Default Output State Isolation Rating (kV) Temp (C) Package Si8663ED-B-IS 3 3 150 High 5.0 -40 to 125 C WB SOIC-16 Notes: 1. All packages are RoHS-compliant with peak reflow temperatures of 260 C according to the JEDEC industry standard classifications and peak solder temperatures. 2. "Si" and "SI" are used interchangeably. 3. An "R" at the end of the part number denotes tape and reel packaging option. 4. The package designated IS2 has a design that eliminates tie bars, thus allowing for extra creepage distance while maintaining standard WB SOIC-16 package dimensions and land pattern. silabs.com | Building a more connected world. Rev. 1.72 | 3 Si8660/61/62/63 Data Sheet Ordering Guide Automotive Grade OPNs Automotive-grade devices are built using automotive-specific flows at all steps in the manufacturing process to ensure robustness and low defectivity. These devices are supported with AIAG-compliant Production Part Approval Process (PPAP) documentation, and feature International Material Data System (IMDS) and China Automotive Material Data System (CAMDS) listing. Qualifications are compliant with AEC-Q100, and a zero-defect methodology is maintained throughout definition, design, evaluation, qualification, and mass production steps. Table 1.2. Ordering Guide for Automotive Grade OPNs1, 2, 4, 5 Ordering Part Number (OPN) Number of Inputs VDD1 Side Number of Inputs VDD2 Side Max Data Rate (Mbps) Default Output State Isolation rating (kV) Temp (C) Package Si8660BC-AS1 6 0 150 Low 3.75 -40 to 125 C NB SOIC-16 Si8660BD-AS 6 0 150 Low 5.0 -40 to 125 C WB SOIC-16 Si8661BB-AS1 5 1 150 Low 2.5 -40 to 125 C NB SOIC-16 Si8661BD-AS 5 1 150 Low 5.0 -40 to 125 C WB SOIC-16 Si8662BB-AS1 4 2 150 Low 2.5 -40 to 125 C NB SOIC-16 Si8662BC-AS1 4 2 150 Low 3.75 -40 to 125 C NB SOIC-16 Si8662BD-AS 4 2 150 Low 5.0 -40 to 125 C WB SOIC-16 Si8663BD-AS 3 3 150 Low 5.0 -40 to 125 C WB SOIC-16 SOIC-16 Packages Note: 1. All packages are RoHS-compliant with peak reflow temperatures of 260 C according to the JEDEC industry standard classifications. 2. "Si" and "SI" are used interchangeably. 3. An "R" at the end of the part number denotes tape and reel packaging option. 4. Automotive-Grade devices (with an "-A" suffix) are identical in construction materials, topside marking, and electrical parameters to their Industrial-Grade (with a "-I" suffix) version counterparts. Automotive-Grade products are produced utilizing full automotive process flows and additional statistical process controls throughout the manufacturing flow. The Automotive-Grade part number is included on shipping labels. 5. Additional Ordering Part Numbers may be available in Automotive-Grade. Please contact your local Silicon Labs sales representative for further information. silabs.com | Building a more connected world. Rev. 1.72 | 4 Table of Contents 1. Ordering Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Functional Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1 Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2 Eye Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 . . . 3. Device Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3.1 Device Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3.2 Undervoltage Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.3 Layout Recommendations . 3.3.1 Supply Bypass . . . 3.3.2 Output Pin Termination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 . 9 . 9 3.4 Fail-Safe Operating Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.5 Typical Performance Characteristics. . . . . . . . . . . . . . . . . . . . . . .10 4. Electrical Specifications 5. Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 6. Package Outline (16-Pin Wide Body SOIC) . . . . . . . . . . . . . . . . . . . 29 7. Land Pattern (16-Pin Wide-Body SOIC). . . . . . . . . . . . . . . . . . . . . 8. Package Outline (16-Pin Narrow Body SOIC) 31 . . . . . . . . . . . . . . . . . . 32 9. Land Pattern (16-Pin Narrow Body SOIC) . . . . . . . . . . . . . . . . . . . . 34 10. Package Outline (16-Pin QSOP) . . . . . . . . . . . . . . . . . . . . . . . 35 11. Land Pattern (16-Pin QSOP) . . . . . . . . . . . . . . . . . . . . . . . . 37 12. Top Marking (16-Pin Wide Body SOIC) 13. Top Marking (16-Pin Narrow Body SOIC) 14. Top Marking (16-Pin QSOP) . . . . . . . . . . . . . . . . . . . . 38 . . . . . . . . . . . . . . . . . . .39 . . . . . . . . . . . . . . . . . . . . . . . . 40 15. Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . silabs.com | Building a more connected world. 41 Rev. 1.72 | 5 Si8660/61/62/63 Data Sheet Functional Description 2. Functional Description 2.1 Theory of Operation The operation of an Si866x channel is analogous to that of an opto coupler, except an RF carrier is modulated instead of light. This simple architecture provides a robust isolated data path and requires no special considerations or initialization at start-up. A simplified block diagram for a single Si866x channel is shown in the figure below. Transmitter Receiver RF OSCILLATOR A MODULATOR SemiconductorBased Isolation Barrier DEMODULATOR B Figure 2.1. Simplified Channel Diagram A channel consists of an RF Transmitter and RF Receiver separated by a semiconductor-based isolation barrier. Referring to the Transmitter, input A modulates the carrier provided by an RF oscillator using on/off keying. The Receiver contains a demodulator that decodes the input state according to its RF energy content and applies the result to output B via the output driver. This RF on/off keying scheme is superior to pulse code schemes as it provides best-in-class noise immunity, low power consumption, and better immunity to magnetic fields. See the figure below for more details. Input Signal Modulation Signal Output Signal Figure 2.2. Modulation Scheme silabs.com | Building a more connected world. Rev. 1.72 | 6 Si8660/61/62/63 Data Sheet Functional Description 2.2 Eye Diagram The figure below illustrates an eye-diagram taken on an Si8660. For the data source, the test used an Anritsu (MP1763C) Pulse Pattern Generator set to 1000 ns/div. The output of the generator's clock and data from an Si8660 were captured on an oscilloscope. The results illustrate that data integrity was maintained even at the high data rate of 150 Mbps. The results also show that 2 ns pulse width distortion and 350 ps peak jitter were exhibited. Figure 2.3. Eye Diagram silabs.com | Building a more connected world. Rev. 1.72 | 7 Si8660/61/62/63 Data Sheet Device Operation 3. Device Operation Device behavior during start-up, normal operation, and shutdown is shown in Figure 3.1 Device Behavior during Normal Operation on page 9, where UVLO+ and UVLO- are the positive-going and negative-going thresholds respectively. Refer to the table below to determine outputs when power supply (VDD) is not present. Table 3.1. Si866x Logic Operation VI Input 1,2 VDDI State1,3,4 VDDO State1,3,4 VO Output1,2 H P P H L P P L X5 UP P L6 H6 X5 P UP Undetermined Comments Normal operation. Upon transition of VDDI from unpowered to powered, VO returns to the same state as VI in less than 1 s. Upon transition of VDDO from unpowered to powered, VO returns to the same state as VI within 1 s. Notes: 1. VDDI and VDDO are the input and output power supplies. VI and VO are the respective input and output terminals. 2. X = not applicable; H = Logic High; L = Logic Low; Hi-Z = High Impedance. 3. "Powered" state (P) is defined as 2.5 V < VDD < 5.5 V. 4. "Unpowered" state (UP) is defined as VDD = 0 V. 5. Note that an I/O can power the die for a given side through an internal diode if its source has adequate current. 6. See 1. Ordering Guide for details. This is the selectable fail-safe operating mode (ordering option). Some devices have default output state = H, and some have default output state = L, depending on the ordering part number (OPN). For default high devices, the data channels have pull-ups on inputs/outputs. For default low devices, the data channels have pull-downs on inputs/ outputs. 3.1 Device Startup Outputs are held low during powerup until VDD is above the UVLO threshold for time period tSTART. Following this, the outputs follow the states of inputs. silabs.com | Building a more connected world. Rev. 1.72 | 8 Si8660/61/62/63 Data Sheet Device Operation 3.2 Undervoltage Lockout Undervoltage Lockout (UVLO) is provided to prevent erroneous operation during device startup and shutdown or when VDD is below its specified operating circuits range. Both Side A and Side B each have their own undervoltage lockout monitors. Each side can enter or exit UVLO independently. For example, Side A unconditionally enters UVLO when VDD1 falls below VDD1(UVLO-) and exits UVLO when VDD1 rises above VDD1(UVLO+). Side B operates the same as Side A with respect to its VDD2 supply. UVLO+ UVLO- VDD1 UVLO+ UVLO- VDD2 INPUT tSD tSTART tSTART tSTART tPHL tPLH OUTPUT Figure 3.1. Device Behavior during Normal Operation 3.3 Layout Recommendations To ensure safety in the end user application, high voltage circuits (i.e., circuits with >30 VAC) must be physically separated from the safety extra-low voltage circuits (SELV is a circuit with <30 VAC) by a certain distance (creepage/clearance). If a component, such as a digital isolator, straddles this isolation barrier, it must meet those creepage/clearance requirements and also provide a sufficiently large high-voltage breakdown protection rating (commonly referred to as working voltage protection). Table 4.5 Regulatory Information 1 on page 23 and Table 4.6 Insulation and Safety-Related Specifications on page 23 detail the working voltage and creepage/clearance capabilities of the Si86xx. These tables also detail the component standards (UL1577, IEC60747, CSA 5A), which are readily accepted by certification bodies to provide proof for end-system specifications requirements. Refer to the end-system specification (61010-1, 60950-1, 60601-1, etc.) requirements before starting any design that uses a digital isolator. 3.3.1 Supply Bypass The Si866x family requires a 0.1 F bypass capacitor between VDD1 and GND1 and VDD2 and GND2. The capacitor should be placed as close as possible to the package. To enhance the robustness of a design, the user may also include resistors (50-300 ) in series with the inputs and outputs if the system is excessively noisy. 3.3.2 Output Pin Termination The nominal output impedance of an isolator driver channel is approximately 50 , 40%, which is a combination of the value of the onchip series termination resistor and channel resistance of the output driver FET. When driving loads where transmission line effects will be a factor, output pins should be appropriately terminated with controlled impedance PCB traces. 3.4 Fail-Safe Operating Mode Si86xx devices feature a selectable (by ordering option) mode whereby the default output state (when the input supply is unpowered) can either be a logic high or logic low when the output supply is powered. See Table 3.1 Si866x Logic Operation on page 8 and 1. Ordering Guide for more information. silabs.com | Building a more connected world. Rev. 1.72 | 9 Si8660/61/62/63 Data Sheet Device Operation 3.5 Typical Performance Characteristics The typical performance characteristics depicted in the following diagrams are for information purposes only. Refer to the electrical characteristics tables for actual specification limits. Figure 3.2. Si8660 Typical VDD1 Supply Current vs. Data Rate Figure 3.3. Si8661 Typical VDD1 Supply Current vs. Data Rate 5, 3.3, and 2.5 V Operation 5, 3.3, and 2.5 V Operation (15 pF Load) Figure 3.4. Si8662 Typical VDD1 Supply Current vs. Data Rate Figure 3.5. Si8660 Typical V DD2 Supply Current vs. Data Rate 5, 3.3, and 2.5 V Operation 5, 3.3, and 2.5 V Operation (15 pF Load) (15 pF Load) silabs.com | Building a more connected world. Rev. 1.72 | 10 Si8660/61/62/63 Data Sheet Device Operation Figure 3.6. Si8661 Typical VDD2 Supply Current vs. Data Rate Figure 3.7. Si8662 Typical VDD2 Supply Current vs. Data Rate 5, 3.3, and 2.5 V Operation 5, 3.3, and 2.5 V Operation (15 pF Load) (15 pF Load) Figure 3.9. Propagation Delay vs. Temperature Figure 3.8. Si8663 Typical VDD1 or VDD2 Supply Current vs. Data Rate 5, 3.3, and 2.5 V Operation (15 pF Load) silabs.com | Building a more connected world. Rev. 1.72 | 11 Si8660/61/62/63 Data Sheet Electrical Specifications 4. Electrical Specifications Table 4.1. Recommended Operating Conditions Parameter Symbol Min Typ Max Unit Junction Operating Temperature TJ -- -- 150 C Ambient Operating Temperature 1 TA -40 25 125 C VDD1 2.375 -- 5.5 V VDD2 2.375 -- 5.5 V Supply Voltage Note: 1. The maximum ambient temperature is dependent on data frequency, output loading, number of operating channels, and supply voltage. Table 4.2. Electrical Characteristics (VDD1 = 5 V 10%, VDD2 = 5 V 10%, TA = -40 to 125 C) Parameter Symbol Test Condition Min Typ Max Unit VDD Undervoltage Threshold VDDUV+ VDD1, VDD2 rising 1.95 2.24 2.375 V VDD Undervoltage Threshold VDDUV- VDD1, VDD2 falling 1.88 2.16 2.325 V VDD Undervoltage Hysteresis VDDHYS 50 70 95 mV Positive-Going Input Threshold VT+ All inputs rising 1.4 1.67 1.9 V Negative-Going Input Threshold VT- All inputs falling 1.0 1.23 1.4 V Input Hysteresis VHYS 0.38 0.44 0.50 V High Level Input Voltage VIH 2.0 -- -- V Low Level Input Voltage VIL -- -- 0.8 V High Level Output Voltage VOH loh = -4 mA VDD1,VDD2 - 0.4 4.8 -- V Low Level Output Voltage VOL lol = 4 mA -- 0.2 0.4 V Input Leakage Current IL -- -- 10 A Output Impedance 1 ZO -- 50 -- DC Supply Current (All Inputs 0 V or at Supply) Si8660Bx, Ex VDD1 VI = 0(Bx), 1(Ex) -- 1.2 1.9 VDD2 VI = 0(Bx), 1(Ex) -- 3.5 5.3 VDD1 VI = 1(Bx), 0(Ex) -- 8.8 12.3 VDD2 VI = 1(Bx), 0(Ex) -- 3.7 5.6 silabs.com | Building a more connected world. mA Rev. 1.72 | 12 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max VDD1 VI = 0(Bx), 1(Ex) -- 1.7 2.7 VDD2 VI = 0(Bx), 1(Ex) -- 3.4 5.1 VDD1 VI = 1(Bx), 0(Ex) -- 7.9 11.1 VDD2 VI = 1(Bx), 0(Ex) -- 4.8 7.2 VDD1 VI = 0(Bx), 1(Ex) -- 2.2 3.3 VDD2 VI = 0(Bx), 1(Ex) -- 3.0 4.5 VDD1 VI = 1(Bx), 0(Ex) -- 7.5 10.5 VDD2 VI = 1(Bx), 0(Ex) -- 5.6 8.4 VDD1 VI = 0(Bx), 1(Ex) -- 2.6 3.9 VDD2 VI = 0(Bx), 1(Ex) -- 2.6 3.9 VDD1 VI = 1(Bx), 0(Ex) -- 6.5 9.1 VDD2 VI = 1(Bx), 0(Ex) -- 6.5 9.1 VDD1 -- 5.0 7.0 VDD2 -- 4.2 5.9 VDD1 -- 4.9 6.9 VDD2 -- 4.6 6.4 VDD1 -- 5.1 7.1 VDD2 -- 4.7 6.6 VDD1 -- 4.9 6.8 VDD2 -- 4.9 6.8 VDD1 -- 5.0 7.0 VDD2 -- 5.9 8.3 VDD1 -- 5.2 7.3 VDD2 -- 6.1 8.5 Unit Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA 1 Mbps Supply Current (All Inputs = 500 kHz Square Wave, CI = 15 pF on all Outputs) Si8660Bx, Ex mA Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA 10 Mbps Supply Current (All Inputs = 5 MHz Square Wave, CI = 15 pF on all Outputs) Si8660Bx, Ex mA Si8661Bx, Ex silabs.com | Building a more connected world. mA Rev. 1.72 | 13 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max Unit VDD1 -- 5.6 7.9 mA VDD2 -- 5.9 8.2 VDD1 -- 5.7 8.0 VDD2 -- 5.7 8.0 Si8662Bx, Ex Si8663Bx, Ex mA 100 Mbps Supply Current (All Inputs = 50 MHz Square Wave, CI = 15 pF on All Outputs) Si8660Bx, Ex VDD1 -- 5.0 7.0 VDD2 -- 26.2 34.1 VDD1 -- 8.8 11.8 VDD2 -- 23 29.8 VDD1 -- 12.8 16.6 VDD2 -- 19.4 25.2 VDD1 -- 16.4 21.3 VDD2 -- 16.4 21.3 Maximum Data Rate 0 -- 150 Mbps Minimum Pulse Width -- -- 5.0 ns mA Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA Timing Characteristics Si866xBx, Ex Propagation Delay tPHL, tPLH See Figure 4.1 Propagation Delay Timing on page 15 5.0 8.0 13 ns PWD See Figure 4.1 Propagation Delay Timing on page 15 -- 0.2 4.5 ns tPSK(P-P) -- 2.0 4.5 ns tPSK -- 0.4 2.5 ns -- 2.5 4.0 ns -- 2.5 4.0 ns -- 350 -- ps Pulse Width Distortion |tPLH - tPHL| Propagation Delay Skew 2 Channel-Channel Skew All Models CL = 15 pF tr Output Rise Time (See Figure 4.1 Propagation Delay Timing on page 15) CL = 15 pF tf Output Fall Time Peak Eye Diagram Jitter tJIT(PK) silabs.com | Building a more connected world. (See Figure 4.1 Propagation Delay Timing on page 15) See Rev. 1.72 | 14 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max Unit 35 50 -- kV/s -- 15 40 s VI = VDD or 0 V Common Mode Transient Immunity CMTI Startup Time 3 VCM = 1500 V (See Figure 4.2 Common Mode Transient Immunity Test Circuit on page 16) tSU 1. The nominal output impedance of an isolator driver channel is approximately 50 , 40%, which is a combination of the value of the on-chip series termination resistor and channel resistance of the output driver FET. When driving loads where transmission line effects will be a factor, output pins should be appropriately terminated with controlled impedance PCB traces. 2. tPSK(P-P) is the magnitude of the difference in propagation delay times measured between different units operating at the same supply voltages, load, and ambient temperature. 3. Start-up time is the time period from the application of power to valid data at the output. 1.4 V Typical Input tPLH tPHL 90% 90% 10% 10% 1.4 V Typical Output tr tf Figure 4.1. Propagation Delay Timing silabs.com | Building a more connected world. Rev. 1.72 | 15 Si8660/61/62/63 Data Sheet Electrical Specifications 3 to 5 V Supply Si86xx Input Signal Switch 3 to 5 V Isolated Supply VDD1 VDD2 INPUT OUTPUT Oscilloscope GND1 GND2 Isolated Ground Input High Voltage Differential Probe Output Vcm Surge Output High Voltage Surge Generator Figure 4.2. Common Mode Transient Immunity Test Circuit Table 4.3. Electrical Characteristics (VDD1 = 3.3 V 10%, VDD2 = 3.3 V 10%, TA = -40 to 125 C) Parameter Symbol Test Condition Min Typ Max Unit VDD Undervoltage Threshold VDDUV+ VDD1, VDD2 rising 1.95 2.24 2.375 V VDD Undervoltage Threshold VDDUV- VDD1, VDD2 falling 1.88 2.16 2.325 V VDD Undervoltage Hysteresis VDDHYS 50 70 95 mV Positive-Going Input Threshold VT+ All inputs rising 1.4 1.67 1.9 V Negative-Going Input Threshold VT- All inputs falling 1.0 1.23 1.4 V Input Hysteresis VHYS 0.38 0.44 0.50 V High Level Input Voltage VIH 2.0 -- -- V Low Level Input Voltage VIL -- -- 0.8 V High Level Output Voltage VOH loh = -4 mA VDD1,VDD2 - 0.4 3.1 -- V Low Level Output Voltage VOL lol = 4 mA -- 0.2 0.4 V Input Leakage Current IL -- -- 10 A Output Impedance ZO -- 50 -- DC Supply Current (All Inputs 0 V or at Supply) silabs.com | Building a more connected world. Rev. 1.72 | 16 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max VDD1 VI = 0(Bx), 1(Ex) -- 1.2 1.9 VDD2 VI = 0(Bx), 1(Ex) -- 3.5 5.3 VDD1 VI = 1(Bx), 0(Ex) -- 8.8 12.3 VDD2 VI = 1(Bx), 0(Ex) -- 3.7 5.6 VDD1 VI = 0(Bx), 1(Ex) -- 1.7 2.7 VDD2 VI = 0(Bx), 1(Ex) -- 3.4 5.1 VDD1 VI = 1(Bx), 0(Ex) -- 7.9 11.1 VDD2 VI = 1(Bx), 0(Ex) -- 4.8 7.2 VDD1 VI = 0(Bx), 1(Ex) -- 2.2 3.3 VDD2 VI = 0(Bx), 1(Ex) -- 3.0 4.5 VDD1 VI = 1(Bx), 0(Ex) -- 7.5 10.5 VDD2 VI = 1(Bx), 0(Ex) -- 5.6 8.4 VDD1 VI = 0(Bx), 1(Ex) -- 2.6 3.9 VDD2 VI = 0(Bx), 1(Ex) -- 2.6 3.9 VDD1 VI = 1(Bx), 0(Ex) -- 6.5 9.1 VDD2 VI = 1(Bx), 0(Ex) -- 6.5 9.1 VDD1 -- 5.0 7.0 VDD2 -- 4.2 5.9 VDD1 -- 4.9 6.9 VDD2 -- 4.6 6.4 VDD1 -- 5.1 7.1 VDD2 -- 4.7 6.6 VDD1 -- 4.9 6.8 VDD2 -- 4.9 6.8 Unit Si8660Bx, Ex mA Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA 1 Mbps Supply Current (All Inputs = 500 kHz Square Wave, CI = 15 pF on All Outputs) Si8660Bx, Ex mA Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA 10 Mbps Supply Current (All Inputs = 5 MHz Square Wave, CI = 15 pF on All Outputs) silabs.com | Building a more connected world. Rev. 1.72 | 17 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max Unit VDD1 -- 5.0 7.0 mA VDD2 -- 5.0 7.0 VDD1 -- 5.0 7.0 VDD2 -- 5.3 7.4 VDD1 -- 5.3 7.4 VDD2 -- 5.2 7.3 VDD1 -- 5.2 7.3 VDD2 -- 5.2 7.3 Si8660Bx, Ex Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA 100 Mbps Supply Current (All Inputs = 50 MHz Square Wave, CI = 15 pF on All Outputs) Si8660Bx, Ex VDD1 -- 5.0 7.0 VDD2 -- 18.3 23.8 VDD1 -- 7.4 9.9 VDD2 -- 16.4 21.3 VDD1 -- 10 13 VDD2 -- 14.1 18.3 VDD1 -- 12.3 15.9 VDD2 -- 12.3 15.9 Maximum Data Rate 0 -- 150 Mbps Minimum Pulse Width -- -- 5.0 ns mA Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA Timing Characteristics Si866xBx, Ex Propagation Delay tPHL, tPLH See Figure 4.1 Propagation Delay Timing on page 15 5.0 8.0 13 ns PWD See Figure 4.1 Propagation Delay Timing on page 15 -- 0.2 4.5 ns tPSK(P-P) -- 2.0 4.5 ns tPSK -- 0.4 2.5 ns Pulse Width Distortion |tPLH - tPHL| Propagation Delay Skew 2 Channel-Channel Skew All Models silabs.com | Building a more connected world. Rev. 1.72 | 18 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max Unit -- 2.5 4.0 ns -- 2.5 4.0 ns -- 350 -- ps 35 50 -- kV/s -- 15 40 s CL = 15 pF tr Output Rise Time See Figure 4.1 Propagation Delay Timing on page 15 CL = 15 pF tf Output Fall Time Peak Eye Diagram Jitter tJIT(PK) See Figure 4.1 Propagation Delay Timing on page 15 See Figure 2.3 Eye Diagram on page 7 VI = VDD or 0 V Common Mode Transient Immunity Startup Time 3 CMTI tSU VCM = 1500 V (See Figure 4.2 Common Mode Transient Immunity Test Circuit on page 16) Notes: 1. The nominal output impedance of an isolator driver channel is approximately 50 , 40%, which is a combination of the value of the on-chip series termination resistor and channel resistance of the output driver FET. When driving loads where transmission line effects will be a factor, output pins should be appropriately terminated with controlled impedance PCB traces. 2. tPSK(P-P) is the magnitude of the difference in propagation delay times measured between different units operating at the same supply voltages, load, and ambient temperature. 3. Start-up time is the time period from the application of power to valid data at the output. silabs.com | Building a more connected world. Rev. 1.72 | 19 Si8660/61/62/63 Data Sheet Electrical Specifications Table 4.4. Electrical Characteristics (VDD1 = 2.5 V 5%, VDD2 = 2.5 V 5%, TA = -40 to 125 C) Parameter Symbol Test Condition Min Typ Max Unit VDD Undervoltage Threshold VDDUV+ VDD1, VDD2 rising 1.95 2.24 2.375 V VDD Undervoltage Threshold VDDUV- VDD1, VDD2 falling 1.88 2.16 2.325 V VDD Undervoltage Hysteresis VDDHYS 50 70 95 mV Positive-Going Input Threshold VT+ All inputs rising 1.4 1.67 1.9 V Negative-Going Input Threshold VT- All inputs falling 1.0 1.23 1.4 V Input Hysteresis VHYS 0.38 0.44 0.50 V High Level Input Voltage VIH 2.0 -- -- V Low Level Input Voltage VIL -- -- 0.8 V High Level Output Voltage VOH loh = -4 mA VDD1,VDD2 - 0.4 2.3 -- V Low Level Output Voltage VOL lol = 4 mA -- 0.2 0.4 V Input Leakage Current IL -- -- 10 A Output Impedance1 ZO -- 50 -- DC Supply Current (All Inputs 0 V or at Supply) Si8660Bx, Ex VDD1 VI = 0(Bx), 1(Ex) -- 1.2 1.9 VDD2 VI = 0(Bx), 1(Ex) -- 3.5 5.3 VDD1 VI = 1(Bx), 0(Ex) -- 8.8 12.3 VDD2 VI = 1(Bx), 0(Ex) -- 3.7 5.6 VDD1 VI = 0(Bx), 1(Ex) -- 1.7 2.7 VDD2 VI = 0(Bx), 1(Ex) -- 3.4 5.1 VDD1 VI = 1(Bx), 0(Ex) -- 7.9 11.1 VDD2 VI = 1(Bx), 0(Ex) -- 4.8 7.2 VDD1 VI = 0(Bx), 1(Ex) -- 2.2 3.3 VDD2 VI = 0(Bx), 1(Ex) -- 3.0 4.5 VDD1 VI = 1(Bx), 0(Ex) -- 7.5 10.5 VDD2 VI = 1(Bx), 0(Ex) -- 5.6 8.4 mA Si8661Bx, Ex mA Si8662Bx, Ex silabs.com | Building a more connected world. mA Rev. 1.72 | 20 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max VDD1 VI = 0(Bx), 1(Ex) -- 2.6 3.9 VDD2 VI = 0(Bx), 1(Ex) -- 2.6 3.9 VDD1 VI = 1(Bx), 0(Ex) -- 6.5 9.1 VDD2 VI = 1(Bx), 0(Ex) -- 6.5 9.1 VDD1 -- 5.0 7.0 VDD2 -- 4.2 5.9 VDD1 -- 4.9 6.9 VDD2 -- 4.6 6.4 VDD1 -- 5.1 7.1 VDD2 -- 4.7 6.6 VDD1 -- 4.9 6.8 VDD2 -- 4.9 6.8 VDD1 -- 5.0 7.0 VDD2 -- 4.6 6.4 VDD1 -- 5.0 6.9 VDD2 -- 4.9 6.9 VDD1 -- 5.2 7.2 VDD2 -- 4.9 6.9 VDD1 -- 5.0 7.0 VDD2 -- 5.0 7.0 Unit Si8663Bx, Ex mA 1 Mbps Supply Current (All Inputs = 500 kHz Square Wave, CI = 15 pF on All Outputs) Si8660Bx, Ex mA Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA 10 Mbps Supply Current (All Inputs = 5 MHz Square Wave, CI = 15 pF on All Outputs) Si8660Bx, Ex mA Si8661Bx, Ex mA Si8662Bx, Ex mA Si8663Bx, Ex mA 100 Mbps Supply Current (All Inputs = 50 MHz Square Wave, CI = 15 pF on All Outputs) Si8660Bx, Ex VDD1 -- 5.0 7.0 VDD2 -- 14.7 19.1 silabs.com | Building a more connected world. mA Rev. 1.72 | 21 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max Unit VDD1 -- 6.7 9.1 mA VDD2 -- 13.4 17.4 VDD1 -- 8.7 11.3 VDD2 -- 11.7 15.2 VDD1 -- 10.3 13.4 VDD2 -- 10.3 13.4 Maximum Data Rate 0 -- 150 Mbps Minimum Pulse Width -- -- 5.0 ns Si8661Bx, Ex Si8662Bx, Ex mA Si8663Bx, Ex mA Timing Characteristics Si866xBx, Ex Propagation Delay tPHL, tPLH See Figure 4.1 Propagation Delay Timing on page 15 5.0 8.0 14 ns PWD See Figure 4.1 Propagation Delay Timing on page 15 -- 0.2 5.0 ns tPSK(P-P) -- 2.0 5.0 ns tPSK -- 0.4 2.5 ns -- 2.5 4.0 ns -- 2.5 4.0 ns -- 350 -- ps 35 50 -- kV/s -- 15 40 s Pulse Width Distortion |tPLH - tPHL| Propagation Delay Skew2 Channel-Channel Skew All Models CL = 15 pF tr Output Rise Time See Figure 4.1 Propagation Delay Timing on page 15 CL = 15 pF tf Output Fall Time Peak Eye Diagram Jitter tJIT(PK) See Figure 4.1 Propagation Delay Timing on page 15 See Figure 2.3 Eye Diagram on page 7 VI = VDD or 0 V Common Mode Transient Immunity Startup Time3 CMTI tSU VCM = 1500 V (See Figure 4.2 Common Mode Transient Immunity Test Circuit on page 16) Notes: 1. The nominal output impedance of an isolator driver channel is approximately 50 , 40%, which is a combination of the value of the on-chip series termination resistor and channel resistance of the output driver FET. When driving loads where transmission line effects will be a factor, output pins should be appropriately terminated with controlled impedance PCB traces. 2. tPSK(P-P) is the magnitude of the difference in propagation delay times measured between different units operating at the same supply voltages, load, and ambient temperature. 3. Start-up time is the time period from the application of power to valid data at the output. silabs.com | Building a more connected world. Rev. 1.72 | 22 Si8660/61/62/63 Data Sheet Electrical Specifications Table 4.5. Regulatory Information 1 CSA The Si866x is certified under CSA Component Acceptance Notice 5A. For more details, see Master Contract Number 232873. 60950-1, 62368-1: Up to 600 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working voltage. 60601-1: Up to 250 VRMS working voltage and 2 MOPP (Means of Patient Protection). VDE The Si866x is certified according to VDE 0884-10. For more details, see certificate 40018443. 0884-10: Up to 1200 Vpeak for basic insulation working voltage. 60950-1: Up to 600 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working voltage. UL The Si866x is certified under UL1577 component recognition program. For more details, see File E257455. Rated up to 5000 VRMS isolation voltage for basic protection. CQC The Si866x is certified under GB4943.1-2011. For more details, see certificates CQC13001096110 and CQC13001096239. Rated up to 600 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working voltage. Note: 1. Regulatory Certifications apply to 2.5 kVRMS rated devices which are production tested to 3.0 kVRMS for 1 sec. Regulatory Certifications apply to 3.75 kVRMS rated devices which are production tested to 4.5 kVRMS for 1 sec. Regulatory Certifications apply to 5.0 kVRMS rated devices which are production tested to 6.0 kVRMS for 1 sec. For more information, see 1. Ordering Guide. Table 4.6. Insulation and Safety-Related Specifications Parameter Symbol Test Condition Value WB SOIC-16 NB SOIC-16 QSOP-16 Unit Nominal External Air Gap (Clearance)1 CLR 8.0 4.9 3.6 mm Nominal External Tracking (Creepage) 1 CPG 8.0 4.01 3.6 mm DTI 0.014 0.014 0.014 mm 600 600 600 VRMS Minimum Internal Gap (Internal Clearance) Tracking Resistance CTI or PTI IEC60112 Erosion Depth ED 0.019 0.019 0.031 mm Resistance (Input-Output)2 RIO 1012 1012 1012 Capacitance (Input-Output)2 CIO 2.0 2.0 2.0 pF 4.0 4.0 4.0 pF Input Capacitance3 silabs.com | Building a more connected world. CI f = 1 MHz Rev. 1.72 | 23 Si8660/61/62/63 Data Sheet Electrical Specifications Parameter Symbol Test Condition Value WB SOIC-16 NB SOIC-16 Unit QSOP-16 Note: 1. The values in this table correspond to the nominal creepage and clearance values. VDE certifies the clearance and creepage limits as 4.7 mm minimum for the NB SOIC-16 package and QSOP-16 packages and 8.5 mm minimum for the WB SOIC-16 package. UL does not impose a clearance and creepage minimum for component-level certifications. CSA certifies the clearance and creepage of the WB SOIC-16 package with designation "IS2" as 8 mm minimum. CSA certifies the clearance and creepage limits as 3.9 mm minimum for the NB SOIC 16, 3.6 mm minimum for the QSOP-16, and 7.6 mm minimum for the WB SOIC-16 package with package designation "IS" as listed in the data sheet. 2. To determine resistance and capacitance, the Si86xx is converted into a 2-terminal device. Pins 1-8 are shorted together to form the first termina and pins 9-16 are shorted together to form the second terminal. The parameters are then measured between these two terminals. 3. Measured from input pin to ground. Table 4.7. IEC 60664-1 Ratings Parameter Basic Isolation Group Installation Classification Test Conditions Specification WB SOIC-16 NB SOIC-16 QSOP-16 I I I Rated Mains Voltages < 150 VRMS I-IV I-IV I-IV Rated Mains Voltages < 300 VRMS I-IV I-III I-III Rated Mains Voltages < 400 VRMS I-III I-II I-II Rated Mains Voltages < 600 VRMS I-III I-II I-II Material Group silabs.com | Building a more connected world. Rev. 1.72 | 24 Si8660/61/62/63 Data Sheet Electrical Specifications Table 4.8. VDE 0884-10 Insulation Characteristics for Si86xxxx1 Parameter Maximum Working Insulation Voltage Symbol Characteristic Test Condition Unit WB SOIC-16 NB SOIC-16 QSOP-16 1200 630 630 Vpeak 2250 1182 1182 Vpeak 6000 6000 6000 Vpeak VIORM Method b1 Input to Output Test Voltage (VIORM x 1.875 = VPR, 100% VPR Production Test, tm = 1 sec, Partial Discharge < 5 pC) Transient Overvoltage VIOTM Surge Voltage VIOSM t = 60 sec Tested per IEC 60065 with surge voltage of 1.2 s/50 s Vpeak Si866xxB/C/D tested with 4000 V Pollution Degree (DIN VDE 0110, Table 1) Insulation Resistance at TS, VIO = 500 V RS 3077 3077 3077 2 2 2 >109 >109 >109 Note: 1. Maintenance of the safety data is ensured by protective circuits. The Si86xxxx provides a climate classification of 40/125/21. Table 4.9. VDE 0884-10 Safety Limiting Values1 Parameter Case Temperature Symbol Max Test Condition WB SOIC-16 NB SOIC-16 TS QSOP-16 Unit 150 150 150 C 220 215 215 mA 415 415 415 mW JA = 100 C/W (WB SOIC-16) Safety Input, Output, or Supply Current IS 105 C/W (NB SOIC-16, QSOP-16) VI = 5.5 V, TJ = 150 C, TA = 25 C Device Power Dissipation2 PD Note: 1. Maximum value allowed in the event of a failure; also see the thermal derating curve in Figure 4.3 (WB SOIC-16) Thermal Derating Curve, Dependence of Safety Limiting Values with Case Temperature per VDE 0884-10 on page 26 and Figure 4.4 (NB SOIC-16, QSOP-16) Thermal Derating Curve, Dependence of Safety Limiting Values with Case Temperature per VDE 0884-10 on page 26. 2. The Si86xx is tested with VDD1 = VDD2 = 5.5 V; TJ = 150 C; CL = 15 pF, input a 150 Mbps 50% duty cycle square wave. Table 4.10. Thermal Characteristics Parameter IC Junction-to-Air Thermal Resistance silabs.com | Building a more connected world. Symbol WB SOIC-16 NB SOIC-16/QSOP-16 Unit JA 100 105 C/W Rev. 1.72 | 25 Si8660/61/62/63 Data Sheet Electrical Specifications Safety-Limiting Current (mA) 500 450 VDD1, VDD2 = 2.70 V 400 370 VDD1, VDD2 = 3.6 V 300 220 200 VDD1, VDD2 = 5.5 V 100 0 0 50 100 Temperature (C) 150 200 Figure 4.3. (WB SOIC-16) Thermal Derating Curve, Dependence of Safety Limiting Values with Case Temperature per VDE 0884-10 Safety-Limiting Current (mA) 500 430 VDD1, VDD2 = 2.70 V 400 360 VDD1, VDD2 = 3.6 V 300 215 200 VDD1, VDD2 = 5.5 V 100 0 0 50 100 Temperature (C) 150 200 Figure 4.4. (NB SOIC-16, QSOP-16) Thermal Derating Curve, Dependence of Safety Limiting Values with Case Temperature per VDE 0884-10 silabs.com | Building a more connected world. Rev. 1.72 | 26 Si8660/61/62/63 Data Sheet Electrical Specifications Table 4.11. Absolute Maximum Ratings 1 Parameter Symbol Min Max Unit TSTG -65 150 C Ambient Temperature Under Bias TA -40 125 C Junction Temperature TJ -- 150 C VDD1, VDD2 -0.5 7.0 V Input Voltage VI -0.5 VDD + 0.5 V Output Voltage VO -0.5 VDD + 0.5 V Output Current Drive Channel IO -- 10 mA Lead Solder Temperature (10 s) -- 260 C Maximum Isolation (Input to Output) (1 sec) NB SOIC-16, QSOP-16 -- 4500 VRMS Maximum Isolation (Input to Output) (1 sec) WB SOIC-16 -- 6500 VRMS Storage Temperature 2 Supply Voltage Notes: 1. Permanent device damage may occur if the absolute maximum ratings are exceeded. Functional operation should be restricted to conditions as specified in the operational sections of this data sheet. 2. VDE certifies storage temperature from -40 to 150 C. silabs.com | Building a more connected world. Rev. 1.72 | 27 Si8660/61/62/63 Data Sheet Pin Descriptions 5. Pin Descriptions VDD1 VDD2 RF XMITR A1 A2 RF XMITR A3 RF XMITR A4 RF XMITR A5 RF XMITR A6 RF XMITR GND1 I s o l a t i o n B1 RF RCVR B2 A2 RF XMITR RF RCVR B3 A3 RF XMITR RF RCVR B4 A4 RF XMITR A5 RF XMITR A6 RF RCVR RF RCVR B5 RF RCVR B6 GND2 VDD1 VDD2 A1 A2 RF XMITR A3 RF XMITR A4 RF XMITR A5 RF RCVR A6 RF RCVR GND1 I s o l a t i o n VDD2 RF RCVR Si8660 RF XMITR VDD1 RF RCVR A1 RF XMITR GND1 B2 A2 RF RCVR B3 A3 RF XMITR RF RCVR B4 A4 RF RCVR RF XMITR B5 A5 RF RCVR RF RF XMITR RCVR B6 A6 RF RCVR GND2 RF RCVR B2 RF RCVR B3 RF RCVR B4 RF RCVR B5 RF XMITR B6 GND2 VDD2 RF XMITR Si8662 B1 VDD1 A1 B1 RF RCVR Si8661 RF XMITR RF RCVR I s o l a t i o n GND1 I s o l a t i o n RF RCVR B1 RF RCVR B2 RF RCVR B3 RF XMITR B4 RF XMITR B5 RF RF XMITR RCVR B6 GND2 Si8663 Figure 5.1. Si866x Pinout Table 5.1. Si866x Pin Descriptions Name SOIC-16 Pin# Type VDD1 1 Supply A1 2 Digital Input Side 1 digital input. A2 3 Digital Input Side 1 digital input. A3 4 Digital Input Side 1 digital input. A4 5 Digital I/O Side 1 digital input or output. A5 6 Digital I/O Side 1 digital input or output. A6 7 Digital I/O Side 1 digital input or output. GND1 8 Ground Side 1 ground. GND2 9 Ground Side 2 ground. B6 10 Digital I/O Side 2 digital input or output. B5 11 Digital I/O Side 2 digital input or output. B4 12 Digital I/O Side 2 digital input or output. B3 13 Digital Output Side 2 digital output. B2 14 Digital Output Side 2 digital output. B1 15 Digital Output Side 2 digital output. VDD2 16 Supply Side 2 power supply. silabs.com | Building a more connected world. Description Side 1 power supply. Rev. 1.72 | 28 Si8660/61/62/63 Data Sheet Package Outline (16-Pin Wide Body SOIC) 6. Package Outline (16-Pin Wide Body SOIC) The figure below illustrates the package details for the Si86xx digital isolator in a 16-pin wide-body SOIC package. The table below lists the values for the dimensions shown in the illustration. Figure 6.1. 16-Pin Wide Body SOIC silabs.com | Building a more connected world. Rev. 1.72 | 29 Si8660/61/62/63 Data Sheet Package Outline (16-Pin Wide Body SOIC) Table 6.1. 16-Pin Wide Body SOIC Package Diagram Dimensions Dimension Min Max A -- 2.65 A1 0.10 0.30 A2 2.05 -- b 0.31 0.51 c 0.20 0.33 D 10.30 BSC E 10.30 BSC E1 7.50 BSC e 1.27 BSC L 0.40 1.27 h 0.25 0.75 0 8 -- 0.10 bbb -- 0.33 ccc -- 0.10 ddd -- 0.25 eee -- 0.10 fff -- 0.20 Notes: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. This drawing conforms to JEDEC Outline MS-013, Variation AA. 4. Recommended reflow profile per JEDEC J-STD-020 specification for small body, lead-free components. silabs.com | Building a more connected world. Rev. 1.72 | 30 Si8660/61/62/63 Data Sheet Land Pattern (16-Pin Wide-Body SOIC) 7. Land Pattern (16-Pin Wide-Body SOIC) The figure below illustrates the recommended land pattern details for the Si86xx in a 16-pin wide-body SOIC package. The table below lists the values for the dimensions shown in the illustration. Figure 7.1. 16-Pin Wide Body SOIC PCB Land Pattern Table 7.1. 16-Pin Wide Body SOIC Land Pattern Dimensions Dimension Feature (mm) C1 Pad Column Spacing 9.40 E Pad Row Pitch 1.27 X1 Pad Width 0.60 Y1 Pad Length 1.90 Notes: 1. This Land Pattern Design is based on IPC-7351 pattern SOIC127P1032X265-16AN for Density Level B (Median Land Protrusion). 2. All feature sizes shown are at Maximum Material Condition (MMC) and a card fabrication tolerance of 0.05 mm is assumed. silabs.com | Building a more connected world. Rev. 1.72 | 31 Si8660/61/62/63 Data Sheet Package Outline (16-Pin Narrow Body SOIC) 8. Package Outline (16-Pin Narrow Body SOIC) The figure below illustrates the package details for the Si86xx in a 16-pin narrow-body SOIC package. The table below lists the values for the dimensions shown in the illustration. Figure 8.1. 16-Pin Narrow Body SOIC silabs.com | Building a more connected world. Rev. 1.72 | 32 Si8660/61/62/63 Data Sheet Package Outline (16-Pin Narrow Body SOIC) Table 8.1. 16-Pin Narrow Body SOIC Package Diagram Dimensions Dimension Min Max A -- 1.75 A1 0.10 0.25 A2 1.25 -- b 0.31 0.51 c 0.17 0.25 D 9.90 BSC E 6.00 BSC E1 3.90 BSC e 1.27 BSC L 0.40 L2 1.27 0.25 BSC h 0.25 0.50 0 8 aaa 0.10 bbb 0.20 ccc 0.10 ddd 0.25 Notes: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. This drawing conforms to the JEDEC Solid State Outline MS-012, Variation AC. 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. silabs.com | Building a more connected world. Rev. 1.72 | 33 Si8660/61/62/63 Data Sheet Land Pattern (16-Pin Narrow Body SOIC) 9. Land Pattern (16-Pin Narrow Body SOIC) The figure below illustrates the recommended land pattern details for the Si86xx in a 16-pin narrow-body SOIC package. The table below lists the values for the dimensions shown in the illustration. Figure 9.1. 16-Pin Narrow Body SOIC PCB Land Pattern Table 9.1. 16-Pin Narrow Body SOIC Land Pattern Dimensions Dimension Feature (mm) C1 Pad Column Spacing 5.40 E Pad Row Pitch 1.27 X1 Pad Width 0.60 Y1 Pad Length 1.55 Notes: 1. This Land Pattern Design is based on IPC-7351 pattern SOIC127P600X165-16N for Density Level B (Median Land Protrusion). 2. All feature sizes shown are at Maximum Material Condition (MMC) and a card fabrication tolerance of 0.05 mm is assumed. silabs.com | Building a more connected world. Rev. 1.72 | 34 Si8660/61/62/63 Data Sheet Package Outline (16-Pin QSOP) 10. Package Outline (16-Pin QSOP) The figure below illustrates the package details for the Si86xx in a 16-pin QSOP package. The table lists the values for the dimensions shown in the illustration. Figure 10.1. 16-Pin QSOP Package silabs.com | Building a more connected world. Rev. 1.72 | 35 Si8660/61/62/63 Data Sheet Package Outline (16-Pin QSOP) Table 10.1. 16-Pin QSOP Package Diagram Dimensions1, 2, 3, 4 Dimension Min Max A -- 1.75 A1 0.10 0.25 A2 1.25 -- b 0.20 0.30 c 0.17 0.25 D 4.89 BSC E 6.00 BSC E1 3.90 BSC e 0.635 BSC L 0.40 L2 1.27 0.25 BSC h 0.25 0.50 0 8 aaa 0.10 bbb 0.20 ccc 0.10 ddd 0.25 Note: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. This drawing conforms to the JEDEC Solid State Outline MO-137, Variation AB. 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. silabs.com | Building a more connected world. Rev. 1.72 | 36 Si8660/61/62/63 Data Sheet Land Pattern (16-Pin QSOP) 11. Land Pattern (16-Pin QSOP) The figure below illustrates the recommended land pattern details for the Si86xx in a 16-pin QSOP package. The table lists the values for the dimensions shown in the illustration. Figure 11.1. 16-Pin QSOP PCB Land Pattern Table 11.1. 16-Pin QSOP Land Pattern Dimensions1, 2 Dimension Feature (mm) C1 Pad Column Spacing 5.40 E Pad Row Pitch 0.635 X1 Pad Width 0.40 Y1 Pad Length 1.55 Note: 1. This Land Pattern Design is based on IPC-7351 pattern SOP63P602X173-16N for Density Level B (Median Land Protrusion). 2. All feature sizes shown are at Maximum Material Condition (MMC) and a card fabrication tolerance of 0.05 mm is assumed. silabs.com | Building a more connected world. Rev. 1.72 | 37 Si8660/61/62/63 Data Sheet Top Marking (16-Pin Wide Body SOIC) 12. Top Marking (16-Pin Wide Body SOIC) Si86XYSV YYWWRTTTTT TW e4 Figure 12.1. 16-Pin Wide Body SOIC Top Marking Table 12.1. 16-Pin Wide Body SOIC Top Marking Explanation Si86 = Isolator product series XY = Channel Configuration X = # of data channels (6) Base Part Number Line 1 Marking: Ordering Options Y = # of reverse channels (3, 2, 1, 0) S = Speed Grade A = 1 Mbps (See 1. Ordering Guide for more information.) B = 150 Mbps (default output = low) E = 150 Mbps (default output = high) V = Insulation rating A = 1 kV; B = 2.5 kV; C = 3.75 kV; D = 5.0 kV YY = Year Line 2 Marking: WW = Workweek RTTTTT = Mfg Code Circle = 1.7 mm Diameter Line 3 Marking: (Center-Justified) Country of Origin ISO Code Abbreviation silabs.com | Building a more connected world. Assigned by assembly subcontractor. Corresponds to the year and workweek of the mold date. Manufacturing code from assembly house "R" indicates revision "e4" Pb-Free Symbol TW = Taiwan as shown, TH = Thailand Rev. 1.72 | 38 Si8660/61/62/63 Data Sheet Top Marking (16-Pin Narrow Body SOIC) 13. Top Marking (16-Pin Narrow Body SOIC) e3 Si86XYSV YYWWRTTTTT Figure 13.1. 16-Pin Narrow Body SOIC Top Marking Table 13.1. 16-Pin Narrow Body SOIC Top Marking Explanation Si86 = Isolator product series XY = Channel Configuration X = # of data channels (6) Base Part Number Line 1 Marking: Ordering Options Y = # of reverse channels (3, 2, 1, 0) S = Speed Grade A = 1 Mbps (See 1. Ordering Guide for more information.) B = 150 Mbps (default output = low) E = 150 Mbps (default output = high) V = Insulation rating A = 1 kV; B = 2.5 kV; C = 3.75 kV Line 2 Marking: Circle = 1.2 mm Diameter "e3" Pb-Free Symbol YY = Year Assigned by the Assembly House. Corresponds to the year and work week of the mold date. WW = Work Week RTTTTT = Mfg Code Circle = 1.2 mm diameter silabs.com | Building a more connected world. Manufacturing code from assembly house. "R" indicates revision. "e3" Pb-Free Symbol. Rev. 1.72 | 39 Si8660/61/62/63 Data Sheet Top Marking (16-Pin QSOP) 14. Top Marking (16-Pin QSOP) Figure 14.1. 16-Pin QSOP Top Marking Table 14.1. 16-Pin QSOP Top Marking Explanation 86 = Isolator product series XY = Channel Configuration X = # of data channels (6) Base Part Number Line 1 Marking: Ordering Options (See 1. Ordering Guide for more information). Y = # of reverse channels (3, 2, 1, 0) S = Speed Grade (max data rate) and operating mode: B = 150 Mbps (default output = low) E = 150 Mbps (default output = high) V = Insulation rating A = 1 kV; B = 2.5 kV; C = 3.75 kV Line 2 Marking: RTTTTT = Mfg Code Line 3 Marking: YY = Year WW = Work Week silabs.com | Building a more connected world. Manufacturing code from assembly house "R" indicates revision Assigned by the Assembly House. Corresponds to the year and work week of the mold date. Rev. 1.72 | 40 Si8660/61/62/63 Data Sheet Revision History 15. Revision History Revision 1.72 October 2018 * Added new Automotive-Grade OPN options. Revision 1.71 January 2018 * Added new table to Ordering Guide for Automotive-Grade OPN options. Revision 1.7 October 18, 2017 * Added new OPNs in Ordering Guide for IU (QSOP) and IS2 (8 mm creepage WB SOIC) package options. * Added 62368-1 references throughout. * Removed 61010-1 references throughout. * Added QSOP-16 package information. Revision 1.6 June 18, 2015 * Updated Table 4.5 Regulatory Information 1 on page 23. * Added CQC certificate numbers. * Updated 1. Ordering Guide. * Removed references to moisture sensitivity levels. * Removed Note 2. * Added note to Table 1.1 Ordering Guide for Valid OPNs 1,2, 3 on page 2 for denoting tape and reel marking. Revision 1.5 September 25, 2013 * Added Figure 4.2 Common Mode Transient Immunity Test Circuit on page 16. * Added references to CQC throughout. * Added references to 2.5 kVRMS devices throughout. * Updated 1. Ordering Guide. * Updated 12. Top Marking (16-Pin Wide Body SOIC). Revision 1.4 June 26, 2012 * Updated Table 4.11 Absolute Maximum Ratings 1 on page 27. * * * * * * Added junction temperature spec. Updated 3.3.1 Supply Bypass. Removed "3.3.2. Pin Connections". Updated 1. Ordering Guide. * Removed Rev A devices. Updated 6. Package Outline (16-Pin Wide Body SOIC). Updated Top Marks. * Added revision description. Revision 1.3 March 21, 2012 * Updated 1. Ordering Guide to include MSL2A. silabs.com | Building a more connected world. Rev. 1.72 | 41 Si8660/61/62/63 Data Sheet Revision History Revision 1.2 September 14, 2011 * Reordered spec tables to conform to new convention. * Removed "pending" throughout document. Revision 1.1 July 14, 2011 * Reordered spec tables to conform to new convention. * Removed "pending" throughout document. Revision 1.0 March 31, 2011 * Added chip graphics on front page. * Updated features list on front page. * Moved Table 4.1 Recommended Operating Conditions on page 12 and Table 4.11 Absolute Maximum Ratings 1 on page 27. * * * * * * Updated 4. Electrical Specifications. Moved Table 3.1 Si866x Logic Operation on page 8. Moved and updated 3.5 Typical Performance Characteristics. Updated Table 5.1 Si866x Pin Descriptions on page 28. Updated 1. Ordering Guide. Removed references to QSOP-16 package. Revision 0.1 September 15, 2010 * Initial release. silabs.com | Building a more connected world. Rev. 1.72 | 42 Smart. Connected. Energy-Friendly. Products Quality www.silabs.com/products www.silabs.com/quality Support and Community community.silabs.com Disclaimer Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons. Trademark Information Silicon Laboratories Inc.(R) , Silicon Laboratories(R), Silicon Labs(R), SiLabs(R) and the Silicon Labs logo(R), Bluegiga(R), Bluegiga Logo(R), Clockbuilder(R), CMEMS(R), DSPLL(R), EFM(R), EFM32(R), EFR, Ember(R), Energy Micro, Energy Micro logo and combinations thereof, "the world's most energy friendly microcontrollers", Ember(R), EZLink(R), EZRadio(R), EZRadioPRO(R), Gecko(R), ISOmodem(R), Micrium, Precision32(R), ProSLIC(R), Simplicity Studio(R), SiPHY(R), Telegesis, the Telegesis Logo(R), USBXpress(R), Zentri, Z-Wave and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders. Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 USA http://www.silabs.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Silicon Laboratories: SI8660BA-A-IS1R SI8660BA-B-IS1R SI8660BC-B-IS1R SI8660BD-B-ISR SI8660EC-B-IS1R SI8660ED-B-ISR SI8661BC-B-IS1R SI8661BD-B-ISR SI8661EC-B-IS1R SI8661ED-B-ISR SI8662BC-B-IS1R SI8662BD-B-ISR SI8662EC-B-IS1R SI8662ED-B-ISR SI8663BC-B-IS1R SI8663BD-B-ISR SI8663EC-B-IS1R SI8663ED-B-ISR Si8662BC-A-IS1 Si8660BC-B-IS1 Si8660BA-B-IS1 Si8660BA-A-IS1 Si8660BD-B-IS Si8660EC-B-IS1 Si8660ED-BIS Si8661BC-B-IS1 Si8661BD-B-IS Si8661EC-B-IS1 Si8661ED-B-IS Si8662BC-B-IS1 Si8662BD-B-IS Si8662EC-BIS1 Si8662ED-B-IS Si8663BC-B-IS1 Si8663BD-B-IS Si8663EC-B-IS1 Si8663ED-B-IS Si8660BB-B-IS1R Si8661BBB-IS1 Si8662BB-B-IS1R Si8660BB-B-IS1 Si8661BB-B-IS1R Si8663BB-B-IS1R Si8663BB-B-IS1 Si8662BB-B-IS1 SI8660ED-B-IS SI8661BB-B-IS1 SI8661BB-B-IS1R SI8662BB-B-IS1R SI8660BA-B-IS1 SI8660BB-B-IS1 SI8661ECB-IS1 SI8662BC-B-IS1 SI8663BD-B-IS SI8660BB-B-IS1R SI8661BC-B-IS1 SI8660BD-B-IS SI8663EC-B-IS1 SI8663BB-B-IS1 SI8660BA-A-IS1 SI8661ED-B-IS SI8663BB-B-IS1R SI8663ED-B-IS SI8660BC-B-IS1 SI8662BB-BIS1 SI8662EC-B-IS1 SI8660EC-B-IS1 SI8662BC-A-IS1 SI8662BD-B-IS SI8661BD-B-IS SI8663BC-B-IS1 SI8662ED-B-IS Si8661BD-B-IS2 SI8661BD-B-IS2R