ES1A - ES1J 1.0AMP. Surface Mount Super Fast Rectifiers SMA/DO-214AC Features Glass passivated junction chip For surface mounted application Low profile package Built-in strain rellef Ideal for automated placement Easy pick and place Super fast recovery time for high efficiency Glass passivated chip junction High temperature soldering: 260/10 seconds at terminals Meet MSL level 1, per J-STD-020D lead free, maximum peak of 260 Plastic material used carries Underwriters Laboratory Classification 94V-0 Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Cases: Molded plastic Terminals: Pure tin plated, lead free Polarity: Indicated by cathode band Packing: 12mm tape per EIA STD RS-481 Weight: 0.064 grams Ordering Information (example) Part No. Package Packing Packing code Packing code (Green) ES1A SMA 1.8K / 7" REEL R3 R3G Maximum Ratings and Electrical Characteristics Rating at 25 ambient temperature unless otherwise specified. Maximum Recurrent Peak Reverse Voltage VRRM ES 1A 50 Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current IF(AV) 1 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 30 A Parameter Symbol Maximum Instantaneous Forward Voltage (Note 1) @1A VF Maximum DC Reverse Current at Rated @ TA=25 DC Blocking Voltage @ TA=125 IR Maximum Reverse Recovery Time (Note 2) Trr Typical Junction Capacitance (Note 3) Cj ES 1B 100 ES 1C 150 ES 1D 200 ES 1F 300 ES 1G 400 ES 1H 500 ES 1J 600 0.95 1.3 Units V 1.7 V 5 uA 100 uA 35 nS 16 18 pF Maximum Thermal Resistance RJA RJL 85 35 Operating Temperature Range TJ - 55 to + 150 O C - 55 to + 150 O C Storage Temperature Range TSTG O C/W Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied VR=4.0 Volts Version:I13 RATINGS AND CHARACTERISTIC CURVES (ES1A THRU ES1J) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE FIG. 2- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 TA=25 Pulse Width=300us 1% Duty Cycle 1 0.8 0.6 0.4 RESISTER OR INDUCTIVE LOAD 0.2 0 80 90 100 110 120 130 PEAK FORWARD SURGE CURRENT (A) LEAD TEMPERATURE 140 150 (oC) FIG. 3- MAXIMUM NON-REPETITIVE FORWARD PEAK SURGE CURRENT 30 INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD A CURRENT (A) 1.2 20 10 ES1A-D 1 ES1H-1J 8.3mS Single Half Sine Wave (JEDEC Method) 25 ES1F-1G 0.1 0.4 TA=25 0.6 0.8 1 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) 15 10 FIG. 5- TYPICAL REVERSE CHARACTERISTICS 5 1000 0 1 10 100 NUMBER OF CYCLES AT 60 Hz 100 INSTANTANEOUS REVERSE CURRENT (uA) TA=125 FIG. 4- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 100 ES1F-J 10 ES1A-D TA=25 1 0.1 1 10 REVERSE VOLTAGE (V) 100 10 TA=75 1 TA=25 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Version:I13 Ordering information Part No. ES1X (Note) Package Packing Packing code Packing code (Green) SMA 1.8K / 7" REEL R3 R3G SMA 7.5K / 13" REEL R2 R2G SMA 7.5K / 13" Plastic REEL M2 M2G Folded SMA 1.8K / 7" REEL F3 F3G Folded SMA 7.5K / 13" REEL F2 F2G Folded SMA 7.5K / 13" Plastic REEL F4 F4G C SMA 1.8K / 7" REEL E3 E3G 7.5K / 13" REEL E2 E2G C SMA Note: "x" is Device Code from "A" thru "J". Tape & Reel specification Reel Size Tape Size 7" 12mm Reel Size Tape Size 13" 12mm A 2.0 178 A max 330 B 0.4 1.9 B 0.5 2 C +0.5;-0.2 13 C 0.5 13 D min 21 D min 20.2 N 1.0 62 N 0.5 75 G +0.8;-0 12.2 G +2.0;-0 12.4 T max 14.6 T max 18.4 Unit (mm) Version:I13 Suggested PAD Layout Symbol A B C D E Unit(mm) 1.78 1.51 3.92 2.41 4.43 Package Outline Dimensions DIM. Unit(mm) Unit(inch) Min Max Min Max A 1.27 1.58 0.050 0.062 B 2.29 2.83 0.090 0.111 C 4.06 4.60 0.160 0.181 D 1.99 2.50 0.078 0.098 E 0.90 1.41 0.035 0.056 F 0.15 0.31 0.006 0.012 G 0.10 0.20 0.004 0.008 H 4.95 5.33 0.195 0.210 Marking Diagram P/N = Specific Device Code G= Green Compound YW = Date Code F= Factory Code Version:I13