SRM-Series ALUMINUM ELECTROLYTIC CAPACITORS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High reliability, Low impedance, 105C LXZ lower Z downsized @Newly innovative electrolyte and internal architecture are employed @Endurance with ripple current : 105C 2000 to 8000 hours @Solvent-proof type (see PRECAUTIONS AND GUIDELINES) LXY ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -55 to +105C 10 to 63Vdc P20% (M) I=0.01CV or 3MA, whichever is greater. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) 10V 16V 25V 35V 50V 63V Rated voltage (Vdc) 0.19 0.16 0.14 0.12 0.10 0.10 tanE (Max.) When nominal capacitance exceeds 1000MF, add 0.02 to the value above for each 1000MF increase. 10Vdc to 50Vdc : 3max. Z(-55C)/Z(+20C) 63Vdc : 6max. (at 20C, 120Hz) (at 20C after 2 minutes) (at 20C, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied for the specified period of time at 105C. Time F5 & 6.3 : 2000hours F8 : 3000hours F10 : 5000hours F12.5 : 7000hours F16 & 18 : 8000hours Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C without voltage applied. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value FP0.5 FD' Fd Sleeve FP0.5 ?DIMENSIONS (Radial Lead Type=VB) [mm] L' 15min. 4min. (F5 to F10) (F12.5 to F16) fD fd F fD' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 FD+0.5max. L+1.5max. 16 0.8 7.5 Gas escape end seal Vent (except F6.3 and smaller) ?PART NUMBERING SYSTEM LXY 16 VB 2200 M K30 Case code Cap tolerance (P20%) Nominal cap code Radial lead type Rated voltage in volts Series name Capacitance 4.7MF 10MF 100MF 2200MF Code 4R7 10 100 2200 (1/2) CAT. No. E1001D SRM-Series ALUMINUM ELECTROLYTIC CAPACITORS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High reliability, Low impedance, 105C ?STANDARD RATINGS Vdc 10 ripple Impedance Rated current Capacitance Items Capacitance (omax/100kHz) (mArms/ (mF) 105c (mF) Case 20c -10c 100kHz) fDbL (mm) code 163 82 0.75 1.5 5b11.5 56 E11 273 180 0.35 0.70 6.3b11.5 120 F11 390 220 0.25 0.50 6.3b15 180 F15 445 330 0.17 0.34 8b12 270 H12 555 470 0.13 0.26 8b15 330 H15 740 680 0.095 0.19 470 8b20 H20 625 390 0.12 0.24 270 10b12.5 J12 825 680 0.084 0.17 470 10b16 J16 1,040 1,000 0.062 0.13 680 10b20 J20 1,260 1,200 0.052 0.11 820 10b25 J25 1,440 1,500 0.044 0.088 1,200 10b30 J30 1,340 1,800 0.046 0.092 1,200 12.5b20 K20 1,690 1,500 2,200 0.034 0.068 12.5b25 K25 1,950 2,200 2,700 0.030 0.060 12.5b30 K30 2,220 2,700 3,300 0.024 0.048 12.5b35 K35 2,390 3,300 3,900 0.022 0.044 12.5b40 K40 1,630 2,200 16b20 3,300 0.038 0.076 L20 2,070 2,700 16b25 3,900 0.028 0.056 L25 2,350 3,900 16b30 5,600 0.025 0.050 L30 2,550 4,700 16b35 6,800 0.022 0.044 L35 2,900 5,600 16b40 8,200 0.018 0.036 L40 Vdc 50 ripple Impedance Rated current Capacitance Items Capacitance (omax/100kHz) (mArms/ (mF) 105c (mF) Case 20c -10c 100kHz) fDbL (mm) code 129 2.4 10 18 1.2 5b11.5 E11 219 18 39 0.54 1.1 6.3b11.5 F11 310 33 56 0.34 0.68 6.3b15 F15 340 47 8b12 68 0.30 0.60 H12 470 68 8b15 82 0.20 0.40 H15 610 82 8b20 120 0.14 0.28 H20 480 56 10b12.5 82 0.20 0.40 J12 755 68 10b16 120 0.13 0.26 J16 945 120 10b20 180 0.088 0.18 J20 1,150 150 10b25 220 0.073 0.15 J25 1,260 180 10b30 330 0.054 0.11 J30 1,190 220 12.5b20 330 0.059 0.12 K20 1,490 270 12.5b25 470 0.044 0.088 K25 1,720 390 12.5b30 560 0.039 0.078 K30 1,890 470 12.5b35 680 0.033 0.066 K35 2,030 560 12.5b40 820 0.029 0.058 K40 1,420 330 16b20 680 0.050 0.10 L20 1,880 470 16b25 820 0.034 0.068 L25 2,150 680 16b30 1,000 0.030 0.060 L30 2,320 820 16b35 1,200 0.027 0.054 L35 2,540 1,000 16b40 1,500 0.024 0.048 L40 16 25 ripple Impedance Rated current Capacitance (omax/100kHz) (mArms/ 105c (mF) 20c -10c 100kHz) 163 0.75 1.5 39 273 0.35 0.70 82 390 0.25 0.50 120 445 0.17 0.34 150 555 0.13 0.26 220 740 0.095 0.19 330 625 0.12 0.24 180 825 0.084 0.17 330 1,040 0.062 0.13 470 1,260 0.052 0.11 560 1,440 0.044 0.088 820 1,340 0.046 0.092 820 1,690 0.034 0.068 1,000 1,950 0.030 0.060 1,500 2,220 0.024 0.048 1,800 2,390 0.022 0.044 2,200 1,630 0.038 0.076 1,500 2,070 0.028 0.056 1,800 2,350 0.025 0.050 2,700 2,550 0.022 0.044 3,300 2,900 0.018 0.036 3,900 35 ripple Impedance Rated current Capacitance (omax/100kHz) (mArms/ 105c (mF) 20c -10c 100kHz) 27 163 0.75 1.5 56 273 0.35 0.70 82 390 0.25 0.50 120 445 0.17 0.34 180 555 0.13 0.26 220 740 0.095 0.19 120 625 0.12 0.24 220 825 0.084 0.17 330 1,040 0.062 0.13 390 1,260 0.052 0.11 560 1,440 0.044 0.088 560 1,340 0.046 0.092 680 1,690 0.034 0.068 1,000 1,950 0.030 0.060 1,200 2,220 0.024 0.048 1,500 2,390 0.022 0.044 1,000 1,630 0.038 0.076 1,200 2,070 0.028 0.056 1,800 2,350 0.025 0.050 2,200 2,550 0.022 0.044 2,700 2,900 0.018 0.036 ripple Impedance Rated current (omax/100kHz) (mArms/ 105c 20c -10c 100kHz) 163 0.75 1.5 273 0.35 0.70 390 0.25 0.50 445 0.17 0.34 555 0.13 0.26 740 0.095 0.19 625 0.12 0.24 825 0.084 0.17 1,040 0.062 0.13 1,260 0.052 0.11 1,440 0.044 0.088 1,340 0.046 0.092 1,690 0.034 0.068 1,950 0.030 0.060 2,220 0.024 0.048 2,390 0.022 0.044 1,630 0.038 0.076 2,070 0.028 0.056 2,350 0.025 0.050 2,550 0.022 0.044 2,900 0.018 0.036 ?RATED RIPPLE CURRENT MULTIPLIERS 63 ripple Impedance Rated current (omax/100kHz) (mArms/ 105c 20c -10c 100kHz) 103 4.8 1.9 161 2.5 1.0 233 1.6 0.61 274 1.2 0.47 360 0.85 0.34 500 0.53 0.21 418 0.68 0.27 525 0.53 0.21 650 0.40 0.16 783 0.33 0.13 960 0.25 0.10 870 0.28 0.11 1,150 0.074 0.19 1,280 0.068 0.17 1,390 0.063 0.16 1,530 0.051 0.13 1,100 0.085 0.22 1,480 0.055 0.14 1,720 0.046 0.12 1,910 0.040 0.10 2,070 0.036 0.090 @Frequency Multipliers Capacitance (mF) Frequency (Hz) 10 to 180 220 to 560 680 to 1800 2200 to 3900 4700 to 8200 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The following case sizes are also available upon request : F4B7mm, F5B7mm, F5B15mm, F6.3B7mm F12.5B15mm, F16B15mm, and F18B15mm. (2/2) CAT. No. E1001D