MLCC 1. Introduction WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce voltage concentrations by distributing voltage gradients throughout the entire capacitor. This special design also affords increased capacitance values in a given case size and voltage rating. Chips size 1206 and larger to use on reflow soldering process only. Capacitors with X7R dielectrics are not intended for AC line filtering applications. Capacitors may require protective surface coating to prevent external arcing. 2. Features a. High voltage in a given case size. b. High stability and reliability. 3. Applications a. Snubbers in high frequency power converters. b. High voltage coupling/DC blocking. c. DC-DC converters. d. Back-lighting inverters. Dimensions Table Size 0805 (2012) L (mm) W (mm) 2.00 0.15 1.25 0.10 3.20 0.15 1206 (3216) 3.20 0.20 Thickness (mm)/Symbol 1.600.15 1.60 0.20 Remark 0.60 1.0 A - 0.80 0.10 B - 1.25 0.10 D # 0.80 0.10 B - 0.95 0.10 C - 1.25 0.10 D - 1.60 0.20 G - NP0 Size 0805, 1206 0.5pF to 6800pF 100pF to 0.47F Capacitance tolerance*** Cap.5pF: C (0.25pF) 5pF<Cap<10pF: D (0.5pF) Cap.10pF: J (5%), K (10%) K (10%), M (20%) Rated voltage (WVDC) 200V to 3kV Cap<30pF: Q400+20C Cap.30pF: Q1000 2.5% Insulation resistance at Ur** Ur=200~630V: 10G or RxC.100-F whichever is smaller Ur=1000~3000V: 10G Dielectric strength 200~300V: 2 x WV DC 500~999V: 1.5 x WV DC 1000~3000V: 1.2 x WV DC Operating temperature Capacitance characteristic 0.600.20 X7R Capacitance* Q* 0.50 0.20 Dimensions : Millimetres General Electrical Data Dielectric MB (mm) -55 to +125C 30ppm 15% Termination Ni/Sn (lead-free termination) http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <1> 24/09/10 V1.1 MLCC * Measured at the condition of 30~70% related humidity. NP0: Apply 1.0 0.2Vrms, 1.0MHz 10% for Cap 1000pF and 1.0 0.2Vrms, 1.0kHz 10% for Cap>1000pF, 25C at ambient temperature. X7R: Apply 1.0 0.2Vrms, 1.0kHz 10%, at 20C ambient temperature. ** Measured at 500VDC for 60 seconds. for Ur>500V DC. *** Preconditioning for Class II MLCC: Perform a heat treatment at 150 10C for 1 hour, then leave in ambient condition for 24 2 hours before measurement. Capacitance Range (X7R Dielectric 200V to 630V) Dielectric X7R Size 0805 1206 630 (V) Rated Voltage (V dc) 0.18F (184) 200 (V) - 200 (V) - 630 (V) - 0.22F (224) - - 0.27F (274) - - - - 0.33F (334) - - - - - - - - 0.39F (394) 0.47F (474) - - - - - - 1. The letter in cell is expressed the symbol of product thickness. 2. The letter in cell with "^" mark is expressed product with Ag/Ni/Sn terminators. Capacitance Range (NP0 Dielectric 200V to 630V) Dielectric Size Rated Voltage (V dc) 0.5pF (0R5) NP0 0805 200 (V) 1206 200 (V) - 630 (V) - 1.0pF (1R0) - - 1.2pF (1R2) - - B B 1.5pF (1R5) 1.8pF (1R8) 2.2pF (2R2) 2.7pF (2R7) A 3.3pF (3R3) 3.9pF (3R9) http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <2> 24/09/10 V1.1 MLCC Capacitance Range (NP0 Dielectric 200V to 630V) Dielectric NP0 Size 0805 Rated Voltage (V dc) 4.7pF (4R7) 200 (V) 1206 200 (V) 630 (V) B B 5.6pF (5R6) 6.8pF (6R8) 8.2pF (8R2) 10pF (100) 12pF (120) 15pF (150) 18pF (180) 22pF (220) 27pF (270) A 33pF (330) 39pF (390) 47pF (470) 56pF (560) 68pF (680) 82pF (820) 100pF (101) 120pF (121) 150pF (151) 180pF (181) B 220pF (221) 270pF (271) 330pF (331) 390pF (391) 470pF (471) D C 560pF (561) 680pF (681) C 820pF (821) 1000pF (102) D G 1200pF (122) - 1500pF (152) - 1800pF (182) - 2200pF (222) - 2700pF (272) - - - 3300pF (392) - - - 3900pF (392) - - - 4700pF( 472) - - - 5600pF (562) - - - 6800pF (682) - - - D - http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <3> 24/09/10 V1.1 MLCC Capacitance Range (X7R Dielectric 200V to 630V) Dielectric X7R Size Rated Voltage (V dc) 100pF (101) 0805 200 (V) 1206 630 (V) 120pF (121) 200 (V) - 630 (V) - - - D D^ 150pF (151) 180pF (181) 220pF (221) 270pF (271) 330pF (331) 390pF (391) 470pF (471) 560pF (561) 680pF (681) B B^ 820pF (821) 1000pF (102) 1200pF (122) 1500pF (152) 1800pF (182) 2200pF (222) 2700pF (272) 3300pF (332) 3900pF (392) - 4700pF (472) - 5600pF (562) - 6800pF (682) - 8200pF (822) - 0.010F (103) 0.012F (123) D - 0.015F (153) - 0.018F (183) - 0.022F (223) - 0.027F (273) - - 0.033F (333) - - - 0.039F (393) - - - - 0.047F (473) - - - - 0.056F (563) - - - - 0.068F (683) - - - - 0.082F (823) - - - - 0.10F (104) - - - - 0.12F(124) - - - - 0.15F (154) - - - - G^ 1. The letter in cell is expressed the symbol of product thickness. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <4> 24/09/10 V1.1 MLCC Appendixes Tape and reel dimensions The dimension of paper tape The dimension of plastic tape Size Thickness A0 B0 T K0 W P0 10xP0 P1 P2 D0 D1 E F 0805 B 1.50 0.10 2.30 0.10 0.95 0.05 8.00 0.10 4.00 0.10 40.0 0.10 4.00 0.10 2.00 0.05 1.55 0.05 1.75 0.05 3.50 0.05 C, D, I <1.57 <2.40 0.23 0.05 <2.50 8.00 0.10 4.00 0.10 40.0 0.10 4.00 0.10 2.00 0.05 1.50 0.05 1.00 0.10 1.75 0.10 3.50 0.05 B 2.00 0.10 3.50 0.10 0.95 0.05 8.00 0.10 4.00 0.10 40.0 0.10 4.00 0.10 2.00 0.05 1.50 0.05 1.75 0.10 3.50 0.05 1206 C, D <1.85 <3.46 0.23 0.05 <2.50 8.00 0.10 4.00 0.10 40.0 0.10 4.00 0.10 2.00 0.05 1.50 0.05 1.00 0.10 1.75 0.10 3.50 0.05 G <1.95 <3.67 0.23 0.05 <2.50 8.00 0.10 4.00 0.10 40.0 0.10 4.00 0.10 2.00 0.05 1.50 0.05 1.00 0.10 1.75 0.10 3.50 0.05 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <5> 24/09/10 V1.1 MLCC The dimension of reel Size Reel size C W1 A N 0805, 1206 10" 13.0+0.5/-0.2 8.4 +1.5/-0 250.0 1.0 100.0 1.0 7" 13.0+0.5/-0.2 8.4+1.5/-0 178.0 0.10 60.0+1/-0 13" 13.0+0.5/-0.2 8.4+1.5/-0 330.0 1.0 100 1.0 Constructions Number Name 1 Ceramic material 2 Inner electrode 3 4 NP0, X7R* Inner layer Termination 5 NPO, X7R, BaTiO3 based AgPd alloy Ni Ag Cu Middle layer Ni Outer layer Sn The construction of MLCC * Partial NP0;X7R items are with Ag/Ni/Sn terminations, please ref to product range of NP0;X7R dielectric for detail. Storage and handling conditions (1) To store products at 5 to 40C ambient temperature and 20 to 70%. related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. Don't store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which easily be resulted in poor soldering. b. To store products on the shelf and avoid exposure to moisture. c. Don't expose products to excessive shock, vibration, direct sunlight and so on. Recommended soldering conditions The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <6> 24/09/10 V1.1 MLCC Specification Table Capacitance (pF) Part Number MLCC, 0805, NP0, 200V, 15pF 15 (150) MCCA000606 MLCC, 0805, NP0, 200V, 22pF 22 (220) MCCA000607 MLCC, 0805, NP0, 200V, 33pF 33 (330) MCCA000608 47 (470) MCCA000609 MLCC, 0805, NP0, 200V, 68pF 68 (680) MCCA000610 MLCC, 0805, NP0, 200V, 100pF 100 (101) MCCA000611 MLCC, 0805, NP0, 200V, 150pF 150 (151) MCCA000612 Description MLCC, 0805, NP0, 200V, 47pF MLCC, 0805, X7R, 200V, 220pF Dielectric Size Rated Voltage (V dc) NP0 X7R MCCA000613 220 (221) MLCC, 0805, NP0, 200V, 220pF NP0 MLCC, 0805, X7R, 200V, 330pF X7R MCCA000614 MCCA000615 0805 MLCC, 0805, NP0, 200V, 330pF 200 330 (331) NP0 MCCA000616 MLCC, 0805, X7R, 200V, 470pF 470 (471) MCCA000617 MLCC, 0805, X7R, 200V, 680pF 680 (681) MCCA000618 MLCC, 0805, X7R, 200V, 1nF 1,000 (102) MCCA000619 MLCC, 0805, X7R, 200V, 1.5nF 1,500 (152) MCCA000620 2,200 (222) MCCA000621 MLCC, 0805, X7R, 200V, 3.3nF 3,300 (332) MCCA000622 MLCC, 0805, X7R, 200V, 4.7nF 4,700 (472) MCCA000623 MLCC, 0805, X7R, 200V, 6.8nF 6,800 (682) MCCA000624 MLCC, 0805, X7R, 200V, 10nF 10,000 (103) MCCA000625 MLCC, 0805, X7R, 200V, 2.2nF X7R Dimensions : Inches (Millimetres) http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <7> 24/09/10 V1.1 MLCC Specification Table Capacitance (pF) Part Number 1,000 (102) MCCA000626 1,500 (152) MCCA000627 2,200 (222) MCCA000628 100 (101) MCCA000629 1,000 (102) MCCA000630 2,200 (222) MCCA000631 MLCC, 1206, X7R, 630V, 4.7nF 4700 (472) MCCA000632 MLCC, 1206, X7R, 630V, 10nF 10,000 (103) MCCA000633 Description Dielectric MLCC, 1206, NP0, 200V, 1nF NP0 Size MLCC, 1206, X7R, 200V, 15nF Rated Voltage (V dc) 200 X7R MLCC, 1206, X7R, 200V, 22nF MLCC, 1206, NP0, 630V, 100pF NP0 1206 MLCC, 1206, X7R, 630V, 1nF MLCC, 1206, X7R, 630V, 2.2nF 630 X7R Dimensions : Inches (Millimetres) Part Number Explanation: MLCC 0805 (2012) N 200 Size Dielectric Rated voltage Size: Dielectric Rated voltage : MLCC 1206 (3216) : N : F = Y5V. : Two significant digits followed by no. of zeros and R is in place of decimal point. 201 = 200 VDC 251 = 250 VDC 501 = 500 VDC 631 = 630 VDC 102 = 1000 VDC 202 = 2000 VDC 302 = 3000 VDC * Partial NP0;X7R items are with Ag/Ni/Sn terminations, please ref to below product range of NP0;X7R dielectric for detail. Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2010. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <8> 24/09/10 V1.1