MLCC
Page <1> 24/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
1. Introduction
WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce voltage
concentrations by distributing voltage gradients throughout the entire capacitor. This special design also affords increased
capacitance values in a given case size and voltage rating.
Chips size 1206 and larger to use on reflow soldering process only. Capacitors with X7R dielectrics are not intended for AC line
filtering applications. Capacitors may require protective surface coating to prevent external arcing.
2. Features
a. High voltage in a given case size.
b. High stability and reliability.
3. Applications
a. Snubbers in high frequency power converters.
b. High voltage coupling/DC blocking.
c. DC-DC converters.
d. Back-lighting inverters.
Dimensions Table
Size L (mm) W (mm) Thickness (mm)/Symbol Remark MB (mm)
0805 (2012) 2.00 ±0.15 1.25 ±0.10 0.60 ±1.0 A - 0.50 ±0.200.80 ±0.10 B -
1.25 ±0.10 D #
1206 (3216) 3.20 ±0.15 1.60±0.15 0.80 ±0.10 B -
0.60±0.20
0.95 ±0.10 C -
1.25 ±0.10 D -
3.20 ±0.20 1.60 ±0.20 1.60 ±0.20 G -
Dimensions : Millimetres
General Electrical Data
Dielectric NP0 X7R
Size 0805, 1206
Capacitance* 0.5pF to 6800pF 100pF to 0.47µF
Capacitance tolerance*** Cap.5pF: C (±0.25pF)
5pF<Cap<10pF: D (±0.5pF)
Cap.10pF: J (±5%), K (±10%) K (±10%), M (±20%)
Rated voltage (WVDC) 200V to 3kV
Q* Cap<30pF: Q400+20C
Cap.30pF: Q1000 2.5%
Insulation resistance at Ur** Ur=200~630V: 10Gor RxC.100-F whichever is smaller
Ur=1000~3000V: 10G
Dielectric strength 200~300V: 2 x WV DC
500~999V: 1.5 x WV DC
1000~3000V: 1.2 x WV DC
Operating temperature -55 to +125°C
Capacitance characteristic ±30ppm ±15%
Termination Ni/Sn (lead-free termination)
MLCC
Page <2> 24/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Capacitance Range (X7R Dielectric 200V to 630V)
1. The letter in cell is expressed the symbol of product thickness.
2. The letter in cell with “^” mark is expressed product with Ag/Ni/Sn terminators.
Dielectric X7R
Size 0805 1206
Rated Voltage
(V dc) 200
(V) 630
(V) 200
(V) 630
(V)
0.18µF (184) - - - -
0.22µF (224) - -- -
0.27µF (274) - -- -
0.33µF (334) - -- -
0.39µF (394) - -- -
0.47µF (474) - -- -
Capacitance Range (NP0 Dielectric 200V to 630V)
Dielectric NP0
Size 0805 1206
Rated Voltage
(V dc) 200
(V) 200
(V) 630
(V)
0.5pF (0R5)
A
- -
1.0pF (1R0) - -
1.2pF (1R2) - -
1.5pF (1R5)
B B
1.8pF (1R8)
2.2pF (2R2)
2.7pF (2R7)
3.3pF (3R3)
3.9pF (3R9)
* Measured at the condition of 30~70% related humidity.
NP0: Apply 1.0 ±0.2Vrms, 1.0MHz ±10% for Cap 1000pF and 1.0 ±0.2Vrms, 1.0kHz ±10% for Cap>1000pF, 25°C at ambient
temperature.
X7R: Apply 1.0 ±0.2Vrms, 1.0kHz ±10%, at 20°C ambient temperature.
** Measured at 500VDC for 60 seconds. for Ur>500V DC.
*** Preconditioning for Class II MLCC: Perform a heat treatment at 150 ±10°C for 1 hour, then leave in ambient condition for 24 ±2
hours before measurement.
MLCC
Page <3> 24/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Dielectric NP0
Size 0805 1206
Rated Voltage
(V dc) 200
(V) 200
(V) 630
(V)
4.7pF (4R7)
A
B B
5.6pF (5R6)
6.8pF (6R8)
8.2pF (8R2)
10pF (100)
12pF (120)
15pF (150)
18pF (180)
22pF (220)
27pF (270)
33pF (330)
39pF (390)
47pF (470)
56pF (560)
68pF (680)
82pF (820)
100pF (101)
120pF (121)
150pF (151) B
180pF (181)
220pF (221)
D
270pF (271)
330pF (331)
390pF (391)
470pF (471)
C
C
560pF (561)
680pF (681) D
820pF (821)
1000pF (102) G
1200pF (122) -
1500pF (152) - D-
1800pF (182) - -
2200pF (222) - -
2700pF (272) - - -
3300pF (392) - - -
3900pF (392) - - -
4700pF( 472) - - -
5600pF (562) - - -
6800pF (682) -- -
Capacitance Range (NP0 Dielectric 200V to 630V)
MLCC
Page <4> 24/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Dielectric X7R
Size 0805 1206
Rated Voltage
(V dc) 200
(V) 630
(V) 200
(V) 630
(V)
100pF (101)
BB^
- -
120pF (121) - -
150pF (151)
DD^
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1000pF (102)
1200pF (122)
1500pF (152)
1800pF (182)
2200pF (222)
2700pF (272)
3300pF (332)
3900pF (392) -
4700pF (472) -
5600pF (562)
D
-
6800pF (682) -
8200pF (822) -
0.010µF (103) -
0.012µF (123) -
0.015µF (153) -
0.018µF (183) -
0.022µF (223) -
G^0.027µF (273) - -
0.033µF (333) - --
0.039µF (393) - -- -
0.047µF (473) - -- -
0.056µF (563) - -- -
0.068µF (683) - -- -
0.082µF (823) - -- -
0.10µF (104) - -- -
0.12µF(124) - -- -
0.15µF (154) - -- -
Capacitance Range (X7R Dielectric 200V to 630V)
1. The letter in cell is expressed the symbol of product thickness.
MLCC
Page <5> 24/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Appendixes
The dimension of paper tape
The dimension of plastic tape
Tape and reel dimensions
Size 0805 1206
Thickness BC, D, I BC, D G
A0 1.50 ±0.10 <1.57 2.00 ±0.10 <1.85 <1.95
B0 2.30 ±0.10 <2.40 3.50 ±0.10 <3.46 <3.67
T0.95 ±0.05 0.23 ±0.05 0.95 ±0.05 0.23 ±0.05 0.23 ±0.05
K0 - <2.50 - <2.50 <2.50
W8.00 ±0.10 8.00 ±0.10 8.00 ±0.10 8.00 ±0.10 8.00 ±0.10
P0 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10
10xP0 40.0 ±0.10 40.0 ±0.10 40.0 ±0.10 40.0 ±0.10 40.0 ±0.10
P1 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10
P2 2.00 ±0.05 2.00 ±0.05 2.00 ±0.05 2.00 ±0.05 2.00 ±0.05
D0 1.55 ±0.05 1.50 ±0.05 1.50 ±0.05 1.50 ±0.05 1.50 ±0.05
D1 -1.00 ±0.10 -1.00 ±0.10 1.00 ±0.10
E1.75 ±0.05 1.75 ±0.10 1.75 ±0.10 1.75 ±0.10 1.75 ±0.10
F3.50 ±0.05 3.50 ±0.05 3.50 ±0.05 3.50 ±0.05 3.50 ±0.05
MLCC
Page <6> 24/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
The dimension of reel
Size 0805, 1206
Reel size 7” 10” 13”
C 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2
W1 8.4+1.5/-0 8.4 +1.5/-0 8.4+1.5/-0
A178.0 ±0.10 250.0 ±1.0 330.0 ±1.0
N 60.0+1/-0 100.0 ±1.0 100 ±1.0
Constructions
Number Name NP0, X7R* NPO, X7R,
1Ceramic material BaTiO3 based
2Inner electrode AgPd alloy Ni
3Termination Inner layer Ag Cu
4Middle layer Ni
5Outer layer Sn
The construction of MLCC
* Partial NP0;X7R items are with Ag/Ni/Sn terminations, please ref to product range of NP0;X7R dielectric for detail.
Storage and handling conditions
(1) To store products at 5 to 40°C ambient temperature and 20 to 70%. related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is
needed.
Cautions:
a. Don’t store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which
easily be resulted in poor soldering.
b. To store products on the shelf and avoid exposure to moisture.
c. Don’t expose products to excessive shock, vibration, direct sunlight and so on.
Recommended soldering conditions
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against
lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2
within oven are recommended.
MLCC
Page <7> 24/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Specification Table
Description Dielectric Size Rated Voltage
(V dc) Capacitance
(pF) Part Number
MLCC, 0805, NP0, 200V, 15pF
NP0
0805 200
15 (150) MCCA000606
MLCC, 0805, NP0, 200V, 22pF 22 (220) MCCA000607
MLCC, 0805, NP0, 200V, 33pF 33 (330) MCCA000608
MLCC, 0805, NP0, 200V, 47pF 47 (470) MCCA000609
MLCC, 0805, NP0, 200V, 68pF 68 (680) MCCA000610
MLCC, 0805, NP0, 200V, 100pF 100 (101) MCCA000611
MLCC, 0805, NP0, 200V, 150pF 150 (151) MCCA000612
MLCC, 0805, X7R, 200V, 220pF X7R 220 (221) MCCA000613
MLCC, 0805, NP0, 200V, 220pF NP0 MCCA000614
MLCC, 0805, X7R, 200V, 330pF X7R 330 (331) MCCA000615
MLCC, 0805, NP0, 200V, 330pF NP0 MCCA000616
MLCC, 0805, X7R, 200V, 470pF
X7R
470 (471) MCCA000617
MLCC, 0805, X7R, 200V, 680pF 680 (681) MCCA000618
MLCC, 0805, X7R, 200V, 1nF 1,000 (102) MCCA000619
MLCC, 0805, X7R, 200V, 1.5nF 1,500 (152) MCCA000620
MLCC, 0805, X7R, 200V, 2.2nF 2,200 (222) MCCA000621
MLCC, 0805, X7R, 200V, 3.3nF 3,300 (332) MCCA000622
MLCC, 0805, X7R, 200V, 4.7nF 4,700 (472) MCCA000623
MLCC, 0805, X7R, 200V, 6.8nF 6,800 (682) MCCA000624
MLCC, 0805, X7R, 200V, 10nF 10,000 (103) MCCA000625
Dimensions : Inches (Millimetres)
MLCC
Page <8> 24/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Specification Table
Description Dielectric Size Rated Voltage
(V dc) Capacitance
(pF) Part Number
MLCC, 1206, NP0, 200V, 1nF NP0
1206
200
1,000 (102) MCCA000626
MLCC, 1206, X7R, 200V, 15nF X7R 1,500 (152) MCCA000627
MLCC, 1206, X7R, 200V, 22nF 2,200 (222) MCCA000628
MLCC, 1206, NP0, 630V, 100pF NP0
630
100 (101) MCCA000629
MLCC, 1206, X7R, 630V, 1nF
X7R
1,000 (102) MCCA000630
MLCC, 1206, X7R, 630V, 2.2nF 2,200 (222) MCCA000631
MLCC, 1206, X7R, 630V, 4.7nF 4700 (472) MCCA000632
MLCC, 1206, X7R, 630V, 10nF 10,000 (103) MCCA000633
Dimensions : Inches (Millimetres)
Part Number Explanation:
MLCC 0805 (2012)
Dielectric
Size
N
Rated voltage
200
Size: : MLCC 1206 (3216)
Dielectric : N : F = Y5V.
Rated voltage : Two significant digits followed by no. of
zeros and R is in place of decimal point.
201 = 200 VDC
251 = 250 VDC
501 = 500 VDC
631 = 630 VDC
102 = 1000 VDC
202 = 2000 VDC
302 = 3000 VDC
* Partial NP0;X7R items are with Ag/Ni/Sn terminations, please ref to below product range of NP0;X7R dielectric for detail.
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or ar e licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual pr operty rights is granted. The Information is subject to change without notice and r eplaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2010.