Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Pulse test: pulse width 300uSec, Duty cycle 2%
Symbols RL101F RL102F RL103F RL104F RL105F RL106F RL107F Units
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
Average forward current
at TA=55 I(AV) 1.0 Amp
Peak forward surge current
8.3mS single half sine-wave IFSM 30.0 Amps
Maximum instantaneous forward voltage
at IFM=1.0A; TJ=25 (Note 3) VF1.30 Volts
Maximum DC reverse current TJ=25
at rated DC blocking voltage TJ=100 IR
5.0
100.0 A
Maximum reverse recovery time (Note 1) Trr 150 250 500 nS
Typical junction capacitance (Note 2) CJ15.0 F
Maximum thermal resistance R JL 50 /W
Operating and storage temperature range TJ, TSTG -65 to +175
Features
RL101F THRU RL107F
FAST SWITCHING PLASITC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
Maximum Ratings and Electrical Characteristics @25 unless otherwise specified
1
Maximum Ratings
DIMENSIONS
DIM
inches mm
Note
Min. Max. Min. Max.
A 0.165 0.205 4.2 5.2
B 0.079 0.106 2.0 2.7
C 0.020 0.024 0.5 0.6
D 1.000 - 25.40 -
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Fast switching for high efficiency
Construction utilizes void-free molded plastic technique
1.0 ampere operation at TA=55 with no thermal
runaway
High temperature soldering guaranteed:
250 /10 seconds, 0.375(9.5mm) lead length,
5 lbs. (2.3kg) tension
Case: A-405 molded plastic body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.008 ounce, 0.23 gram
RATINGS AND CHARACTERISTIC CURVES
2
RATINGS AND CHARACTERISTIC CURVES
3
