EC3A01B Ordering number : ENN6612B N-Channel Silicon Junction FET EC3A01B Electret Condenser Microphone Applications Features * * * * * Ultrasmall (1006 size), thin (0.5mm) leadless package. Especially suited for use in electret condenser microphone for audio equipments and telephones. Excellent voltage characteristics. Excellent transient characteristics. Adoption of FBET process. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Gate-to-Drain Voltage Conditions Ratings VGDO IG Gate Current Drain Current Unit --20 V 10 mA 1 mA 100 mW Junction Temperature ID PD Tj 150 C Storage Temperature Tstg --55 to +150 C Allowable Power Dissipation Electrical Characteristics at Ta=25C Parameter Symbol Gate-to-Drain Breakdown Voltage Cutoff Voltage Drain Current V(BR)GDO VGS(off) Input Capacitance IDSS yfs Ciss Reverse Transfer Capacitance Crss Forward Transfer Admittance Conditions IG=---100A VDS=5V, ID=1A VDS=5V, VGS=0 VDS=5V, VGS=0, f=1kHz VDS=5V, VGS=0, f=1MHz Ratings min typ max --20 --0.2 V --0.6 140 0.5 VDS=5V, VGS=0, f=1MHz Unit --1.2 350 1.2 V A mS 3.5 pF 0.65 pF *The EC3A01B is classified by IDSS as follows.(unit : A) Rank V4A V5A IDSS 140 to 240 210 to 350 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 13105GB TS IM / 42503 TS IM TA-100435 / 13001 TS IM TA-3160 No.6612-1/5 EC3A01B [Ta=25C, VCC=4.5V, RL=1k, Cin=15pF, See Specified Test Circuit] Parameter Symbol Voltage Gain GV GVV Gvf Reduced Voltage Characteristics Frequency Characteristics Input Impedance Ratings Conditions min typ f=1kHz, VIN=10mV --3.0 f=1kHz, VIN=10mV, VCC=4.51.5V --1.2 f=1kHz to 110kHz f=1kHz Output Impedance ZIN ZO Total Harmonic Distortion THD f=1kHz, VIN=30mV Output Noise Voltage VNO VIN=0, A Curve max dB --3.5 --1.0 25 f=1kHz Unit dB dB M 1000 1.2 % --110 dB Package Dimensions unit : mm 2188A Bottom View 0.5 3 2 0.15 1 1.0 Marking 2 0.05 3 0.25 0.05 0.4 1 0.25 0.05 0.65 0.05 Top View 0.15 0.2 0.5 0.35 0.6 1 : Drain 2 : Source 3 : Gate SANYO : ECSP1006-3 Type No. Indication (Top view) Electrical Connection (Top view) Polarity mark (On the top) Drain Gate Source *Electrodes : On the bottom V Polarity mark Gate Drain Source Switching Time Test Circuit Voltage Gain Frequency Characteristics Distortion Reduced Voltage Characteristics 15pF 1k VCC=4.5V VCC=1.5V 33F + B A 1k VTVM V THD OSC Output Impedance No.6612-2/5 EC3A01B ID -- VDS 500 400 300 Drain Current, ID -- A VGS=0 200 --0.1V --0.2V 100 0 1 2 3 4 5 6 7 8 --0.2V --0.3V --0.4V 9 10 0 1 2 --0.5V 3 4 5 Drain-to-Source Voltage, VDS -- V IT02310 ID -- VGS IT03015 ID -- VGS 400 VDS=5V VDS=5V 320 A 50 ID 2 A 0 100 80 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 Gate-to-Source Voltage, VGS -- V yfs -- IDSS 1.3 --2 15 0 --0.7 0 --1.0 0 --0.9 --0.8 --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 Gate-to-Source Voltage, VGS -- V IT02312 Cutoff Voltage, VGS(off) -- V 1.0 0.9 0.8 0.7 0.6 0 IT02313 VDS=5V ID=1A --0.65 1.1 --0.1 VGS(off) -- IDSS --0.70 VDS=5V VGS=0 f=1kHz 1.2 160 5 C A 25 C 0 5 =3 S S 200 240 C 300 75 Drain Current, ID -- A Drain Current, ID -- A --0.1V 0 400 Forward Transfer Admittance, yfs -- mS 200 --0.5V Drain-to-Source Voltage, VDS -- V 500 VGS=0 100 --0.3V --0.4V 0 300 Ta = Drain Current, ID -- A 400 --0.60 --0.55 --0.50 --0.45 --0.40 --0.35 0.5 --0.30 0 100 200 300 Drain Current, IDSS -- A 400 0 500 IT02314 THD -- VIN 10 150A I DSS= 100 200 250A 350A 1.0 0.1 300 Drain Current, IDSS -- A 400 500 IT02315 PD -- Ta 120 THD : VCC=4.5V f=1kHz IDSS : VDS=5.0V Allowable Power Dissipation, PD -- mW 100 Total Harmonic Distortion, THD -- % ID -- VDS 500 100 80 60 40 20 0 0 50 100 150 Input Voltage, VIN -- mV 200 IT02316 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT02317 No.6612-3/5 EC3A01B Ciss -- VDS 10 Reverse Transfer Capacitance, Crss -- pF Input Capacitance, Ciss -- pF 7 5 3 7 2 1.0 3 5 7 2 10 Drain-to-Source Voltage, VDS -- V 1.0 7 5 7 Reduced Voltage Characteristics, GVV -- dB --2 --3 --4 --5 --6 --7 0 100 200 300 Drain Current, IDSS -- A 400 --0.7 1.5 1.0 0.5 7 2 10 3 IT02319 --0.9 --1.1 --1.3 --1.5 --1.7 0 100 200 300 Drain Current, IDSS -- A 400 500 IT02321 Zi -- IDSS Zi : VCC=4.5V VIN=10mV f=1kHz IDSS : VDS=5.0V 31 Input Impedance, Zi -- M 2.0 5 GVV : VCC=4.5V1.5V VIN=10mV f=1kHz IDSS : VDS=5.0V 32 THD : VCC=4.5V VIN=30mV f=1MHz IDSS : VDS=5.0V 3 GVV -- IDSS --0.5 500 IT02320 THD -- IDSS 2.5 2 1.0 Drain-to-Source Voltage, VDS -- V IT02318 GV : VCC=4.5V VIN=10mV RL=1.0k f=1kHz IDSS : VDS=5.0V --1 Voltage Gain, GV -- dB 2 3 GV -- IDSS 0 Total Harmonic Distortion, THD -- % VGS=0 f=1MHz 3 2 30 29 28 27 26 0 0 100 200 300 Drain Current, IDSS -- A 400 0 500 IT02322 ZO -- IDSS 950 100 940 930 920 910 200 300 Drain Current, IDSS -- A 400 500 IT02323 400 500 IT02325 VNO -- IDSS --111 ZO : VCC=4.5V VIN=10mV f=1kHz IDSS : VDS=5.0V VNO : VCC=4.5V VIN=0, A Curve RL=1.0k IDSS : VDS=5.0V --112 Output Noise Voltage, VNO -- dB 960 Output Impedance, ZO -- Crss -- VDS 3 VGS=0 f=1MHz --113 --114 --115 --116 --117 --118 --119 --120 900 0 100 200 300 Drain Current, IDSS -- A 400 500 IT02324 0 100 200 300 Drain Current, IDSS -- A No.6612-4/5 EC3A01B Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2005. Specifications and information herein are subject to change without notice. PS No.6612-5/5