Bel Power Solutions
152 North 3rd Stree
t, Suite 805
San Jose, CA 95112 USA
© 2014 Bel Power Solutions, inc.
North America
+1
-866.513.2839
Asia-Pacific
+86.755.29885888
Europe
, Middle East
+353 61 225 977
tech.support@psbel.com
BCD.00560_001
Instrumentation
Lighting
Industrial Applications
Applied Computing
Renewable Energy
Test and Measurement
Automation Control
Wireless Communication
3 x 5 x 1 Inches Form Factor
350 Watts with Forced Air Cooling &
200 Watts with Convection Cooling
Efficiencies up to 94%
-40 to 70 degree operating
temperature
12 V Fan Output, Thermal Shut
-Down
feature
> 800 k Hours MTBF
Standby Power < 0.5 W
Approved to EN60950-1 2nd Ed
ition
RoHS Compliant
CE marked
A
BC
350 Series
© 2014 Bel Power Solutions, inc.
866.513.2839
tech.support@psbel.com
BCD.00560_001
MODEL NUMBER
DESCRIPTION
VOLTAGE
MAX. LOAD
(CONVECTION)
MAX. LOAD
(375 LMF)
MIN. LOAD
RIPPLE & NOISE
1
ABC350-1T12L
Screw Terminal
12 V
15 A
25 A
0.0 A
1%
ABC350-1T15L
Screw Terminal
15 V
12 A
21.67 A
0.0 A
1%
ABC350-1T24L
ABC350-1024L
Screw Terminal
Molex Connector
24 V
8.33 A
14.60 A
0.0 A
1%
ABC350-1T30L
ABC350-1030L
Screw Terminal
Molex Connector
30 V
6.67 A
11.67 A
0.0 A
1%
ABC350-1T48L
ABC350-1048L
Screw Terminal
Molex Connector
48 V
4.17 A
7.30 A
0.0 A
1%
ABC350-1T58L
ABC350-1058L
Screw Terminal
Molex Connector
58 V
3.45 A
6.04 A
0.0 A
1%
ABC350-CK metal cover kit accessory
NOTES:
1.
Ripple is peak to peak with 20 M
Hz bandwidth and 10
μ
F (T
antalum capacitor) in parallel with a 0.1
μ
F capacitor at rated line
voltage and load ranges.
2.
Combined output power of main
output, fan supply shall not exceed max. pow
er rating.
3.
Fan supply output voltag
e tolerance including set point accuracy, line and load r
egulation is +/
-10% and ripple and noise is less
than 10%.
4.
Thermal shutdown feature: The p
ower supply goes in hiccup mode when the t
emperature of PCB exceeds 110 °C (+/
-10 °C).
5.
Output ripple can be more than 10% of the
output voltage.
A
BC
350 Series
© 2014 Bel Power Solutions, inc.
866.513.2839
tech.support@psbel.com
BCD.00560_001
Specifications are for nominal input voltage, 25°C unless otherwise stated.
PARAMETER
DESCRIPTION / CONDITION
CRITERION
Input Voltage
Universal
(Derate from 100% at 100 VAC to 90% at 9
0 VAC)
85
-264 VAC / 390 VDC
Input Frequency
47
- 63 Hz
Input Current
115 VAC:
230 VAC:
3.6 A max.
1.8 A max.
No Load Power
Typical
>0.5 W
Inrush Current
115 VAC:
230 VAC:
264 VAC:
25 A
45 A
75 A
Leakage Current
Typical
300 uA
Power Factor
with Full Load
>0.95
PARAMETER
DESCRIPTION / CONDITION
CRITERION
Output Power
With 375 LFM:
Convection:
350 W
200 W
Efficiency
48 V, 58 V:
24 V, 30 V:
12 V, 15 V:
94%
93%
92%
Hold-up Time
Full Load:
Convection Load:
8 ms typical
14 ms typical
Line Regulation
+/
-
0.5%
Load Regulation
+/
-
1%
Transient Response
50
-100% step load change, at 0.1A/uS slew rat
e,
50% duty cycle, 50Hz=5% ,
recovery time < 5 ms
Rise Time
Typical
55 ms
Set Point Tolerance
+/
-
1%
Over Current Protection
Hiccup mode / Auto Recovery
>110%
Over Voltage Protection
Hiccup mode / Auto Recovery
110 to 140%
Short Circuit Protection
Hiccup mode / Auto Recovery
PARAMETER
DESCRIPTION / CONDITION
CRITERION
Isolation Voltage
Input to Output: for ITE application
Input to GND:
3000 VAC
1500 VAC
Switching Frequency
PFC:
PWM:
70
- 130 KHz
50
- 80 KHz
Operating Temperature
-40 to 0°C startup guaranteed, wi
th spec deviation
-40 to +70°C
Non-operating Temperature
-40 to 85° C
Reliability
MTBF according to Bellcore TR-
332, @ 25°C
>800 kh
Cooling
With 375 LFM forced air cooling at 100 t
o 264 VAC:
With natural convection cooling at 100 to 264 VA
C:
350 W
200 W
A
BC
350 Series
© 2014 Bel Power Solutions, inc.
866.513.2839
tech.support@psbel.com
BCD.00560_001
PARAMETER
DESCRIPTION / CONDITION
CRITERION
Conducted Emissions
EN55022-B, CISPR22-B, FCC PA
RT15 - B
Static Discharge
EN61000-4-
2:
Level-3
RF Field Susceptibility
EN61000-4-3:
Level-3
Fast Transients/Bursts
EN61000-4-
4:
Level-3
Radiated Emissions
Radiated:
Radiated with external core:
Level A
TBD
Surge Susceptibility
EN61000-4-
5:
Level-3
Harmonic Current
EN61000-3-
2:
Class D
Altitude
Operating:
Non-operating:
10,000 ft.
40,000 ft.
Humidity
Non Condensing
5% to 95%
Safety Standard(s)
EN60950-1
IEC60950-1 (ed.2)
UL 60950 (ed.2)
CSA C22.2 No.60950-1 (ed.2)
Class1 SELV
Agency Approvals
Nemko, UL, C-
UL
CE mark
Complies with LVD Directive
Figure 1
–
Derating Curves
A
BC
350 Series
© 2014 Bel Power Solutions, inc.
866.513.2839
tech.support@psbel.com
BCD.00560_001
CONNECTOR
PIN
DESCRIPTION/CONDITION
MANUFACTURER / PN
AC Input Connector
J1
Pin 1
Pin 2
Pin 3
AC Neutral
Not Fitted
AC Line
Molex: 26-
60
-4030
Mating: 09-
50
-3031; Pins: 08-
50
-
0106
DC Output Connector
J2
Screw Terminal
Pin 1
Pin 2
(Option 1)
V1 -VE
V1 + VE
6-32 inches Screw Pan HD
Mating: 16 AWG wire crimped to
Ring
Tongue Terminal AMP: 8-31886
-1
Molex Connector
Pin 1,2,3,4
Pin 5,6,7,8
(Option 2)
V1 -VE
V1 + VE
Molex: 26-
60
-4080
Mating: 09-
50
-3081; Pins: 08-
50
-
0106
Aux (Fan) Output
J3
Pin 1
Pin 2
FAN -
VE
FAN +VE
AMP :640456-2
Mating: 640440-2
Earth
J4
Molex: 19705-4301
Mating: 19003-0001
PARAMETER
DESCRIPTION/CONDITION
Weight
300 g max
Dimensions
76.2 x 127 x 25.4 mm (
3 x 5 x 1 inch)
Figure 2
–
Mechanical Drawing
–
Screw Terminal Option
A
BC
350 Series
© 2014 Bel Power Solutions, inc.
866.513.2839
tech.support@psbel.com
BCD.00560_001
Figure 3
–
Mechanical Drawing
–
Molex Connector Option
NUCLEAR AND MEDICAL APPL
ICATIONS
- Products are not d
esigned or intended for use as crit
ical components in li
fe support
systems, equipment used in hazardous environ
ments, or nuclear control systems.
TECHNICAL REVISIONS
- The a
ppearance of products, including safety agency ce
rtifications pictured on lab
els, may change depending
on the date manufactured. Specifi
cations are subject to change without notice.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Bel Power Solutions
:
ABC350-1T24L
ABC350-1T12L
ABC350-1T48L
Suppliers Inquiry
Previous
Next
Link
Name *
Reason for Contact
General Inquiry
Place Order
Report Issue
Target Price (Option)
Email Address *
Message *
BOM / Attach Files (Option)
Maximum allowed file size is 10MB