General Purpose Panel/Plug-in Relays SCHRACK Interface Plug-in Relay XT n n n n n n n n 1 pole 16 A, 2 pole 8 A, 1 form C (1 CO) contact or 2 form C (2 CO) contacts DC or AC coil, sensitive coil 400 mW Reinforced insulation, protection class II (VDE 0700) 4kV/8mm dielectric strength between coil and contact Manual test tab, optionally lockable Version with mechanical and/or electrical indicator optional Suitable for use in Tyco Electronics' standard RT sockets Recycleable packaging Typical applications Panel boards, mechanical engineering. Z Approvals Coil Data VDE Cert. No. 40017832, UL E214025, Lloyds 08/20067 (E2) Technical data of approved types on request. Contact Data XT 1pole XT 2pole Contact arrangement 1 form C (CO) 2 form C (CO) Rated voltage 240VAC 240VAC Max. switching voltage 400VAC 400VAC Rated current 16A 8A, UL: 10A Limiting making current, max 4s, df 10% 30A 15A Limiting short-time current, 30ms 300A 300A Switching power 4000VA 2000VA Contact material AgNi90/10 Min. recommended contact load 12V at 10mA Initial voltage drop 30mV at 100mA/6VDC Frequency of operation, with/without load 360/36000h-1 Operate time, DC coil typ. 8ms typ. 10ms Release time, DC coil, without PD typ. 6ms typ. 5ms Bounce time, form A/form B, DC coil typ. 4/6ms typ. 4/9ms Contact ratings Type Contact Load IEC 61810 XT3 C (CO) 16A, 250VAC, cos=1, 70C XT3 A (NO) 16A, 250VAC, cos=1, 70C XT4 C (CO) 8A, 250VAC, cos=1, 70C XT4 DC-coil A (NO) 8A, 250VAC, cos=1, 70C UL 508 XT3 C (CO) 16A, 250VAC, general purpose, 70C XT4 C (CO) 10A, 250VAC, general purpose, 70C XT4 C (CO) 8A, 250VAC, general purpose, 70C Mechanical endurance DC coil 10x106 operations AC coil 5x106 operations 09-2015, Rev. 0915 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Coil voltage range 6 to 110VDC 24 to 230VAC Operative range, IEC 61810 2 Coil insulation system according UL class 155 (F) Coil versions, DC coil Coil code Rated Operate Release Coil Rated coil STD LED LED & voltage voltage voltage resistance power PD3) VDC VDC VDC 10%1) mW4) 012 L12 LB2 12 8.4 1.2 360 400/10 024 L24 LC4 24 16.8 2.4 1440 400/19 048 L48 LE8 48 33.6 4.8 5520 417/39 110 M10 MB0 110 77.0 11.0 288001) 420/87 1) Coil resistance 12%. 3) Protection diode PD; standard polarity: +A1 / -A2. 4) Coil power/optional LED power. All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. Cycles 30x103 50x103 50x103 100x103 30x103 20x103 30x103 Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 1 General Purpose Panel/Plug-in Relays SCHRACK Interface Plug-in Relay XT (Continued) Coil Data (continued) Other Data Coil versions, AC coil Coil code Rated Operate Release Coil Rated coil STD LED voltage voltage voltage resistance power 50/60Hz 50/60Hz 50/60Hz VAC VAC VAC 10%2) VA5) 524 R24 24 18.0/19.2 3.6 350 0.76/0.58 615 S15 115 86.3/92.0 17.3 81002) 0.76/0.58 730 T30 230 172.5/184.0 34.5 325002) 0.74/0.58 2) Coil resistance 15%. 5) Power for optional LED: 24VAC:12mVA, 115VAC: 54mVA, 230VAC: 73mVA. All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +70C Cold storage, IEC 60068-2-1 -40C/16h Dry heat, IEC 60068-2-2 85C/16h Damp heat cyclic IEC 60068-2-30, Db, Variant 1 25/55C for 12/12h (2 cycles) Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional), form A (NO)/form B (NC) 20/5g (30 to 500Hz) Shock resistance (destructive) 100g Terminal type plug-in Cover retention pull force 100 N push force 100 N Mounting distance 4.5mm, corresponds to dense packing of sockets Manual operation testing and locking position6) Weight16g Packaging unit 10/250 pcs. 6) Locking function description If the test button is pulled out too forcefully, it may bypass the momentary testing position and go straight into the locked position. Delivery status is with testing possibility only, to reach locking position please remove the locking plastic pip according drawing. Insulation Data Initial dielectric strength between open contacts between contact and coil in combination with socket RT78726 in combination with socket RT78725 between adjacent contacts Initial surge withstand voltage between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 1000Vrms 5000Vrms 4000Vrms 2500Vrms 5000V (1,2/50s) 8/8mm IIIa PTI 175V Accessories For details see datasheet Accessories Interface Plug-in Relay XT Note: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. Product Sets Complete sets consisting of a relay mounted on a socket see Package XT 2 09-2015, Rev. 0915 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. General Purpose Panel/Plug-in Relays SCHRACK Interface Plug-in Relay XT (Continued) Dimensions Terminal assignment Bottom view on pins 1 form C (CO) contact 16 A 2 form C (CO) contacts 8 A Product code structure XT Typical product code 3 7 4 T30 Type XT Interface Plug-in Relay XT Version 3 1 pole, 16A, pinning 5mm 4 2 pole, 8A, pinning 5mm Contact configuration 1 1 form C contact (1 CO) 7 2 2 form C contacts (2 CO) 8 Contact material 4 AgNi90/10 Coil Coil code: please refer to coil versions table Product key XT374LC4 XT374R24 XT374T30 XT484LC4 XT484R24 XT484T30 Other types on request. 09-2015, Rev. 0915 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Contacts 1 form C contact (1 CO) with test button and mechanical indicator 2 form C contacts (2 CO) with test button and mechanical indicator Cont. material Coil 1 form C AgNi90/10 DC coil 1 CO contact test button, AC coil 16A mechanical 2 form C and electrical DC coil 2 CO contacts indicator AC coil 8A Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Coil 24VDC 24VAC 230VAC 24VDC 24VAC 230VAC Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Part number 1887112-1 1887113-3 1887113-1 1887212-1 1887213-3 1887213-1 Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 3