DXT790AP5
Document number: DS31800 Rev. 2 - 2 1 of 7
www.diodes.com March 2010
© Diodes Incorporated
DXT790AP5
PowerDI is a registered tra demark of Diodes Incorpo r ated.
A
Product Line o
f
Diodes Incorporated
40V PNP HIGH GAIN TRANSISTOR
PowerDI®5
Features
• 43% smaller than SOT223; 60% smaller than TO252
• Maximum height just 1.1mm
• Rated up to 3.2W
• V
CEO = 40V
• I
C = 3A; ICM = 6A
• Low Saturation, high gain transistor,
• Lead, Halogen, and Antimony Free/RoHS Compliant (No te 1)
• “Green” Device (Note 2)
Mechanical Data
• Case: PowerDI®5
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Weight: 0.093 grams (approximate)
Ordering Information (Note 3)
Part Number Case Packaging
DXT790AP5-13 PowerDI
®
5 5000/Tape & Reel
Notes: 1. No purposefully added lead. Halogen and Antimony Free.
2. Diodes Inc’s “Green” Policy can be found on our website at http://www.diodes.com
3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
Top View Bottom View Device Schematic Pin Configuration
C
BE
DXT790A = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 09 for 2009)
WW = Week code (01 to 53)
YYWWK
DXT790A
DXT790AP5
Document number: DS31800 Rev. 2 - 2 2 of 7
www.diodes.com March 2010
© Diodes Incorporated
DXT790AP5
PowerDI is a registered tra demark of Diodes Incorpo r ated.
A
Product Line o
f
Diodes Incorporated
Maximum Ratings @TA = 25°C unless otherwise specified
Characteristic Symbol Value Unit
Collector-Base Voltage VCBO -50 V
Collector-Emitter Voltage VCEO -40 V
Emitter-Base Voltage VEBO -5 V
Continuous Collector Current IC -3 A
Peak Pulse Current ICM -6 A
Base Current IB -0.5 A
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation @ TA = 25°C (Note 4) PD 3.2 W
Thermal Resistance, Junction to Ambient Air (Note 4) @TA = 25°C R
θ
JA 39 °C/W
Power Dissipation @ TA = 25°C (Note 5) PD 1.7 W
Thermal Resistance, Junction to Ambient Air (Note 5) @TA = 25°C R
θ
JA 75 °C/W
Power Dissipation @ TA = 25°C (Note 6) PD 0.74 W
Thermal Resistance, Junction to Ambient Air (Note 6) @TA = 25°C R
θ
JA 169 °C/W
Thermal Resistance, Junction to Collector Terminal R
θ
JT 8.9 °C/W
Operating and Storage Temperature Range TJ, TSTG -55 to +150 °C
Notes: 4. Device mounted on 1.6mm FR-4 PCB, single sided 2 oz. copper collector pad dimensions 50mm x 50mm.
5. Device mounted on 1.6mm FR-4 PCB, single sided 1 oz. copper collector pad dimensions 25mm x 25mm.
6. Device mounted on 1.6mm FR-4 PCB, single sided 1 oz. copper minimum recommended pad layout.
DXT790AP5
Document number: DS31800 Rev. 2 - 2 3 of 7
www.diodes.com March 2010
© Diodes Incorporated
DXT790AP5
PowerDI is a registered tra demark of Diodes Incorpo r ated.
A
Product Line o
f
Diodes Incorporated
10 100 1000 10000
20
40
60
80
100
120
140
160
180
10 100 1000 10000
0
1
2
3
4
100m 1 10
10m
100m
1
10
Single Pulse. Tamb=25°C
See note 3
VCE(sat)
Limited
100µs
1ms
10ms
100ms
1s
DC
Safe Operating Area
-IC Co l l ector Current (A )
-VCE Collector-Emitter Voltage (V) 0 25 50 75 100 125 150 175
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
See note 5
See note 4
See note 3
Derating Curve
Temperature (°C)
Max P o we r Dissipation (W)
100µ 1m 10m 100m 1 10 100 1k
0
10
20
30
40
Power Rating vs. Cu Area
Therm al Resistance vs. Cu Area
See note 3
Transient Thermal Imp edan ce
D=0.5
D=0.2
D=0.1
Single Puls e
D=0.05
Therm a l Resi st a nce (° C/ W)
Puls e Width (s) 100µ 1m 10m 100m 1 10 100 1k
1
10
100 Single Pulse. Tamb=25°C
See note 3
Pulse Power Dissipation
Puls e Width (s )
Max Power Dissi p at i o n (W )
2 oz. weight Copper
T(amb)=25°C
Copper Area (sq mm)
Thermal Resist an ce (°C/W)
1 oz. weight Copper
1 oz. weight Copper
2 oz. weight Copper
Power Rating (W)
Copper Area (sq mm)
T(amb)=25°C
DXT790AP5
Document number: DS31800 Rev. 2 - 2 4 of 7
www.diodes.com March 2010
© Diodes Incorporated
DXT790AP5
PowerDI is a registered tra demark of Diodes Incorpo rated.
A
Product Line o
f
Diodes Incorporated
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
OFF CHARACTERISTICS
Collector-Base Breakdown Voltage V
(
BR
)
CBO -50 ⎯ ⎯ V IC = -100μA, IE = 0
Collector-Emitter Breakdown Voltage (Note 7) V
(
BR
)
CEO -40 ⎯ ⎯ V IC = -10mA, IB = 0
Emitter-Base Breakdown Voltage V
(
BR
)
EBO -5 ⎯ ⎯ V IE = -100μA, IC = 0
Collector Cutoff Current ICBO ⎯ ⎯ -20 nA
VCB = -30V, IE = 0
Collector Cutoff Current ICES ⎯ ⎯ -20 nA VCB = -30V, VBE = 0
Emitter Cutoff Current IEBO ⎯ ⎯ -20 nA
VEB = -4V, IC = 0
ON CHARACTERISTICS (Note 7)
Collector-Emitter Saturation Voltage VCE(SAT)
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
-170
-350
-450
-450
mV
IC = -0.5A, IB = -5mA
IC = -1A, IB = -10mA
IC = -2A, IB = -50mA
IC = -3A, IB = -300mA
Base-Emitter Saturation Voltage VBE
(
SAT
)
⎯ ⎯ -1.15 V
IC = -3A, IB = -300mA
Base-Emitter Turn-On Voltage VBE
(
ON
)
⎯ ⎯ -1.0 V
VCE = -2V, IC = -3A
DC Current Gain hFE
300
250
200
150
80
⎯
⎯
⎯
⎯
⎯
800
⎯
⎯
⎯
⎯
⎯
VCE = -2V, IC = -10mA
VCE = -2V, IC = -500mA
VCE = -2V, IC = -1A
VCE = -2V, IC = -2A
VCE = -2V, IC = -3A
AC C HARACTER IST ICS
Transition Frequency fT 100 ⎯ ⎯ MHz VCE = -5V, IC = -50mA,
f = 50MHz
Output Capacitance Cobo ⎯ 24 ⎯ pF VCB = -10V, f = 1MHz
Switching Times ton
toff ⎯
⎯ 35
600 ⎯
⎯ ns
ns VCC = -10V, IC = -500mA,
IB1 = IB2 = -50mA
Notes: 7. Pulse Test: Pulse width ≤300μs. Duty cycle ≤2.0%.
DXT790AP5
Document number: DS31800 Rev. 2 - 2 5 of 7
www.diodes.com March 2010
© Diodes Incorporated
DXT790AP5
PowerDI is a registered tra demark of Diodes Incorpo rated.
A
Product Line o
f
Diodes Incorporated
Typical Characteristics
1m 10m 100m 1 10
10m
100m
1
1m 10m 100m 1
0.0
0.2
0.4
0.6
0.8
1.0
1m 10m 100m 1 10
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1m 10m 100m 1 10
0.4
0.6
0.8
1.0
1m 10m 100m 1 10
0.2
0.4
0.6
0.8
1.0
0
90
180
270
360
450
540
630
VCE(SAT) v IC
Tamb=25°C
IC/IB=100
IC/IB=40
IC/IB=10
-VCE(SAT) (V)
-IC Co l l e cto r Current (A)
VBE(SAT) v IC
IC/IB=100
100°C
25°C
-55°C
-VCE(SAT) (V)
-IC Co llector C urrent (A)
hFE v IC
VCE=-2V
-55°C
25°C
100°C
Normalised Gain
-IC Col l e cto r Curre nt (A)
IC/IB=100
25°C
VCE(SAT) v IC
100°C
-55°C
-VBE(SAT) (V)
-IC Co llector C urrent (A)
VBE(ON) v IC
VCE=-2V
100°C
25°C
-55°C
-VBE(ON) (V)
-IC Co l l e cto r Current (A)
Typical Gain (hFE)
DXT790AP5
Document number: DS31800 Rev. 2 - 2 6 of 7
www.diodes.com March 2010
© Diodes Incorporated
DXT790AP5
PowerDI is a registered tra demark of Diodes Incorpo rated.
A
Product Line o
f
Diodes Incorporated
Package Outline Dimensions
Suggested Pad Layout
PowerDI
®
5
Dim Min Max
A 1.05 1.15
A2 0.33 0.43
b1 0.80 0.99
b2 1.70 1.88
D 3.90 4.05
D2 3.054 Typ
E 6.40 6.60
e 1.84 Typ
E1 5.30 5.45
E2 3.549 Typ
L 0.75 0.95
L1 0.50 0.65
W 1.10 1.41
All Dimensions in mm
Dimensions Value (in mm)
Z 6.6
X1 1.4
X2 3.6
Y1 0.8
Y2 4.7
C 3.87
E1 0.9
ZC
X2 E1
X1
Y1
Y2
EE1
b1
A
A2
A2
D
b2
b1
e
D2
L
E2
L1
W
DXT790AP5
Document number: DS31800 Rev. 2 - 2 7 of 7
www.diodes.com March 2010
© Diodes Incorporated
DXT790AP5
PowerDI is a registered tra demark of Diodes Incorpo rated.
A
Product Line o
f
Diodes Incorporated
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2009, Diodes Incorporated
www.diodes.com
