1
D
2
V
W
D2VW
Sealed Miniature Basic Switch
Sealed Miniature Basic
Switch Conforms to IP67
(Excluding the terminals on
terminal models)
●Use of epoxy resin assures stable sealing, making
this switch ideal for places subject to water spray
or excessive dust.
●V-series internal mechanism assures high
precision and durability. The mounting is the
same as of the V models.
●Ideal for automobiles, agricultural machines,
large-scale home appliances, and industrial
equipment, which require high environmental
resistance.
RoHS Compliant
Model Number Legend
D2VW- @@@@@
1. Ratings
5 : 250 VAC 5 A
01 : 30 VDC 0.1 A
2. Actuator
None : Pin plunger
L1A : Short hinge lever
L1 : Hinge lever
L1B : Long hinge lever
L2A : Short hinge roller lever
L2 : Hinge roller lever
L3 : Simulated roller hinge lever
3. Contact form
-1 : SPDT
-2 : SPST-NC
-3 : SPST-NO
4. Terminals
None, HS : Solder terminals
M, MS : Molded lead wires
Note: UL/CSA approved versions are available.
In this case, HS, MS will be added to the end of the model numbe
UL/CSA approved models have UL approved wiring
(AWG20 UL1015).
Consult your OMRON sales representative for details.
5. Length of the molded lead wire
None : 300 mm
-0 : 1,000 mm
12345
2
D2VW Sealed Miniature Basic Switch
D
2
V
W
List of Models
Ratings 5 A 0.1 A
Actuator Terminals Contact form
Pin plunger
Solder terminals
SPDT D2VW-5-1 D2VW-01-1
SPST-NC D2VW-5-2 D2VW-01-2
SPST-NO D2VW-5-3 D2VW-01-3
Molded lead wires (300 mm)
SPDT D2VW-5-1M D2VW-01-1M
SPST-NC D2VW-5-2M D2VW-01-2M
SPST-NO D2VW-5-3M D2VW-01-3M
Molded lead wires (1,000 mm) SPDT D2VW-5-1M-0 D2VW-01-1M-0
Short hinge lever
Solder terminals
SPDT D2VW-5L1A-1 D2VW-01L1A-1
SPST-NC D2VW-5L1A-2 D2VW-01L1A-2
SPST-NO D2VW-5L1A-3 D2VW-01L1A-3
Molded lead wires (300 mm)
SPDT D2VW-5L1A-1M D2VW-01L1A-1M
SPST-NC D2VW-5L1A-2M D2VW-01L1A-2M
SPST-NO D2VW-5L1A-3M D2VW-01L1A-3M
Molded lead wires (1,000 mm) SPDT D2VW-5L1A-1M-0 D2VW-01L1A-1M-0
Hinge lever
Solder terminals
SPDT D2VW-5L1-1 D2VW-01L1-1
SPST-NC D2VW-5L1-2 D2VW-01L1-2
SPST-NO D2VW-5L1-3 D2VW-01L1-3
Molded lead wires (300 mm)
SPDT D2VW-5L1-1M D2VW-01L1-1M
SPST-NC D2VW-5L1-2M D2VW-01L1-2M
SPST-NO D2VW-5L1-3M D2VW-01L1-3M
Molded lead wires (1,000 mm) SPDT D2VW-5L1-1M-0 D2VW-01L1-1M-0
Long hinge lever
Solder terminals
SPDT D2VW-5L1B-1 D2VW-01L1B-1
SPST-NC D2VW-5L1B-2 D2VW-01L1B-2
SPST-NO D2VW-5L1B-3 D2VW-01L1B-3
Molded lead wires (300 mm)
SPDT D2VW-5L1B-1M D2VW-01L1B-1M
SPST-NC D2VW-5L1B-2M D2VW-01L1B-2M
SPST-NO D2VW-5L1B-3M D2VW-01L1B-3M
Molded lead wires (1,000 mm) SPDT D2VW-5L1B-1M-0 D2VW-01L1B-1M-0
Short hinge roller lever
Solder terminals
SPDT D2VW-5L2A-1 D2VW-01L2A-1
SPST-NC D2VW-5L2A-2 D2VW-01L2A-2
SPST-NO D2VW-5L2A-3 D2VW-01L2A-3
Molded lead wires (300 mm)
SPDT D2VW-5L2A-1M D2VW-01L2A-1M
SPST-NC D2VW-5L2A-2M D2VW-01L2A-2M
SPST-NO D2VW-5L2A-3M D2VW-01L2A-3M
Molded lead wires (1,000 mm) SPDT D2VW-5L2A-1M-0 D2VW-01L2A-1M-0
Hinge roller lever
Solder terminals
SPDT D2VW-5L2-1 D2VW-01L2-1
SPST-NC D2VW-5L2-2 D2VW-01L2-2
SPST-NO D2VW-5L2-3 D2VW-01L2-3
Molded lead wires (300 mm)
SPDT D2VW-5L2-1M D2VW-01L2-1M
SPST-NC D2VW-5L2-2M D2VW-01L2-2M
SPST-NO D2VW-5L2-3M D2VW-01L2-3M
Molded lead wires (1,000 mm) SPDT D2VW-5L2-1M-0 D2VW-01L2-1M-0
Simulated roller hinge
lever
Solder terminals
SPDT D2VW-5L3-1 D2VW-01L3-1
SPST-NC D2VW-5L3-2 D2VW-01L3-2
SPST-NO D2VW-5L3-3 D2VW-01L3-3
Molded lead wires (300 mm)
SPDT D2VW-5L3-1M D2VW-01L3-1M
SPST-NC D2VW-5L3-2M D2VW-01L3-2M
SPST-NO D2VW-5L3-3M D2VW-01L3-3M
Molded lead wires (1,000 mm) SPDT D2VW-5L3-1M-0 D2VW-01L3-1M-0
Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately) Refer to "
Basic Switch Common Accessories
"
3
D2VW Sealed Miniature Basic Switch
D
2
V
W
●Safety Standard Approved Models
Contact Form
Contact Specifications
* Please refer to "Using Micro Loads" in "●Precautions" for more
information on the minimum applicable load.
Ratings
Note. The above rating values apply under the following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%
(3) Operating frequency: 30 operations/min
Approved Safety Standards
UL (UL1054)/CSA (CSA C22.2 No.55)
The terminal specification for models with UL/CSA safety
standard certification is “HS” or “MS.”
VDE (EN61058-1)
The models in the List of Models on the previous page are not
certified for VDE standards.
Contact your OMRON representative if you require certified
models.
Testing conditions: D2VW-5 25E3 (25,000 operations)
T55 (0 to 55°C)
D2VW-01 1E5 (100,000 operations)
T85 (0 to 85°C)
Ratings 5A 0.1A
Actuator Terminals Contact form
Pin plunger Solder terminals
SPDT
D2VW-5-1HS D2VW-01-1HS
Molded lead wires (300 mm) D2VW-5-1MS D2VW-01-1MS
Short hinge lever Solder terminals D2VW-5L1A-1HS D2VW-01L1A-1HS
Molded lead wires (300 mm) D2VW-5L1A-1MS D2VW-01L1A-1MS
Hinge lever Solder terminals D2VW-5L1-1HS D2VW-01L1-1HS
Molded lead wires (300 mm) D2VW-5L1-1MS D2VW-01L1-1MS
Long hinge lever Solder terminals D2VW-5L1B-1HS D2VW-01L1B-1HS
Molded lead wires (300 mm) D2VW-5L1B-1MS D2VW-01L1B-1MS
Short hinge roller lever Solder terminals D2VW-5L2A-1HS D2VW-01L2A-1HS
Molded lead wires (300 mm) D2VW-5L2A-1MS D2VW-01L2A-1MS
Hinge roller lever Solder terminals D2VW-5L2-1HS D2VW-01L2-1HS
Molded lead wires (300 mm) D2VW-5L2-1MS D2VW-01L2-1MS
Simulated roller lever Solder terminals D2VW-5L3-1HS D2VW-01L3-1HS
Molded lead wires (300 mm) D2VW-5L3-1MS D2VW-01L3-1MS
●SPDT ●SPST-NC ●SPST-NO
COM (Black)
NC (Red)
NO (Blue)
COM (Black)
NC (Red)
COM (Black)
NO (Blue)
The color in parentheses indicates
the color of the lead wire.
Item Model D2VW-5 models D2VW-01 models
Contact
Specification Rivet Crossbar
Material Silver alloy Gold alloy
Gap (standard value) 0.5 mm
Inrush
current
NC 15A max. -
NO 15A max. -
Minimum applicable load
(reference value) * 5 VDC 160 mA 5 VDC 1 mA
Item Resistive load
Model Rated voltage
D2VW-5 models
250 VAC
125 VAC
5 A
5 A
30 VDC 5 A
D2VW-01 models 125 VAC 0.1 A
30 VDC 0.1 A
Rated voltage Model D2VW-5 D2VW-01
125 VAC
250 VAC
3 A
3 A
0.1 A
-
30 VDC - 0.1 A
Rated voltage Model D2VW-5 D2VW-01
125 VAC
250 VAC
-
3 A
0.1 A
-
Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately) Refer to "
Micro Switch Common Accessories
"
4
D2VW Sealed Miniature Basic Switch
D
2
V
W
Characteristics
Note. The data given above are initial values.
*1. The dielectric strength shown in the table indicates the value for models
with a Separator (refer to "Basic Switch Common Accessories").
*2. For the pin plunger models, the above values apply for use at the free
position and total travel position. For the lever models, they apply at the
total travel position. Close or open circuit of the contact is 1 ms max.
*3. For testing conditions, consult your OMRON sales representative.
Mounting Holes (Unit: mm)
Dimensions (Unit: mm) and Operating Characteristics
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
Item Model D2VW-5 models D2VW-01 models
Permissible operating speed 0.1mm to 1m/s (for pin plunger models)
Permissible
operating
frequency
Mechanical 300 operations/min
Electrical 60 operations/min
Insulation resistance 100 M
Ω
min. (500 VDC with insulation tester)
Contact
resistance
(initial value)
Terminal models 50 m
Ω
max.
Molded lead wire
terminals (300mm) 100 m
Ω
max.
Molded lead wire
terminals (1,000mm) 200 m
Ω
max.
Dielectric
strength *1
Between terminals of the
same polarity 1,000 VAC 50/60 Hz for 1 min
Between current-carrying
metal parts and ground 1,500 VAC 50/60 Hz for 1 min
Between terminals and
non-current-carrying
metal parts
1,500 VAC 50/60 Hz for 1 min
Vibration
resistance *2 Malfunction 10 to 55 Hz, 1.5 mm double amplitude
Shock
resistance
Destruction 1,000m/s
2
{approx. 100G} max.
Malfunction *2 300m/s
2
{approx. 30G} max.
Durability *3
Mechanical 10,000,000 operations min. (60 operations/min)
Electrical 100,000 operations min.
(30 operations/min)
1,000,000 operations min.
(30 operations/min)
Degree of
protection
Terminal models IEC IP67 (excluding the terminals on terminal models)
Molded lead wire models IEC IP67
Degree of protection against electric
shock Class l
Proof tracking index (PTI) 175
Ambient operating temperature –40°C to
+
85°C (at ambient humidity of 60% max.)
(with no icing or condensation)
Ambient operating humidity 95% max. (for
+
5°C to
+
35°C)
Weight Approx. 7 g (for pin plunger models with terminals)
22.2
±0.1
10.3
±0.1
2-3.1 dia. mounting holes
or M3 screw holes
The illustrations and dimensions are for pin plunger models.
Dimensions and operation characteristics of other actuator models are the same as those of molded lead
wires models.
t0.5
3-Solder terminals
5.2
5.2
2.5
0.5
2.4 dia. holes
3.1
+0.13
dia. holes
-0.03
3.1
+0.13
-0.03
1.3 dia. holes
4.7510.3
1.2
5.2
8.4
2.5
dia.
20.2
±0.25
10.3
±0.1
3.2
±0.1
dia.
22.2
±0.1
2.8
15.9
PT
OP
2.8
33
A
●Pin Plunger Models
D2VW-5-1
D2VW-01-1 Operating Force OF Max.
Releasing Force RF Min.
1.96 N {200 gf}
0.29 N {30 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
1.2 mm
1.0 mm
0.4 mm
Operating Position OP 14.7±0.4 mm
5
D2VW Sealed Miniature Basic Switch
D
2
V
W
The illustration and drawing shown is the SPDT model. SPST-NC model and SPST-NO model are omitted.
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
Models with molded lead wires
●Pin Plunger Models
D2VW-5-1M
D2VW-5-1M-0
D2VW-01-1M
D2VW-01-1M-0
300 mm type
Dimensions
1,000 mm type
300±10L 1,000±30
3.1
+0.13
dia. holes
‑0.03
3.1
+0.13
-0.03
2.5 dia.
20.2
±0.25
10.3
±0.1
3.2
±0.1
dia.
22.2
±0.1
2.8 (5) 10.3
2.8
15.9
PT
OP
33 L
AV0.75f molded lead wire (red)*
AV0.75f molded lead wire (blue)*
AV0.75f molded lead wire (black)*
A
* UL/CSA approved models have UL
approved wiring (AWG20 UL1015).
Operating Force OF Max.
Releasing Force RF Min.
1.96 N {200 gf}
0.29 N {30 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
1.2 mm
1.0 mm
0.4 mm
Operating Position OP
14.7±0.4 mm
●Short Hinge Lever Models
D2VW-5L1A-1M
D2VW-5L1A-1M-0
D2VW-01L1A-1M
D2VW-01L1A-1M-0
24.3±0.8
t=0.5*
15.9
PT
OP
A
5
* Stainless-steel lever 10.3
4.3
Operating Force OF Max.
Releasing Force RF Min.
1.96 N {200 gf}
0.20 N {20 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
1.6 mm
0.8 mm
0.5 mm
Operating Position OP
15.2±0.5 mm
●Hinge Lever Models
D2VW-5L1-1M
D2VW-5L1-1M-0
D2VW-01L1-1M
D2VW-01L1-1M-0
10.3
4.3
35.6
±0.8
t=0.5*
* Stainless-steel lever
15.9
PT
OP
A5
Operating Force OF Max.
Releasing Force RF Min.
1.18 N {120 gf}
0.15 N {15 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
4.0 mm
1.6 mm
0.8 mm
Operating Position OP
15.2±1.2 mm
●Long Hinge Lever Models
D2VW-5L1B-1M
D2VW-5L1B-1M-0
D2VW-01L1B-1M
D2VW-01L1B-1M-0
Operating Force OF Max.
Releasing Force RF Min.
0.59 N {60 gf}
0.05 N {5 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
9.0 mm
3.2 mm
2.0 mm
Operating Position OP
15.2±2.6 mm
59.4
±0.8
t=0.5*
* Stainless-steel lever
15.9
PT
OP
A
5
10.3
4.3
●
Simulated Roller Lever Hinge Models
D2VW-5L3-1M
D2VW-5L3-1M-0
D2VW-01L3-1M
D2VW-01L3-1M-0
10.3
4.3
32.6
±0.8
t=0.5*
R3.5
* Stainless-steel lever
15.9
PT
OP
A5
Operating Force OF Max.
Releasing Force RF Min.
1.18N {120 gf}
0.15N {15 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
4.0 mm
1.6 mm
0.8 mm
Operating Position OP
18.7±1.2 mm
6
D2VW Sealed Miniature Basic Switch
D
2
V
W
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
Models with molded lead wires
●Short Hinge Roller Lever Models
D2VW-5L2A-1M
D2VW-5L2A-1M-0
D2VW-01L2A-1M
D2VW-01L2A-1M-0
7.2
10.3
24.3±0.8
20.1±0.8
t=0.5
*1. Stainless-steel lever
*2. Polyacetal resin roller
15.9
PT
OP
A5
*1
4.8×4.8 dia.
*2
Operating Force OF Max.
Releasing Force RF Min.
2.25 N {230 gf}
0.20 N {20 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
1.6 mm
0.8 mm
0.5 mm
Operating Position OP
20.7±0.6 mm
●Hinge roller lever
D2VW-5L2-1M
D2VW-5L2-1M-0
D2VW-01L2-1M
D2VW-01L2-1M-0
34
±0.8
t=0.5 * 1
*1. Stainless-steel lever
*2. Polyacetal resin roller
15.9
PT
OP
A5
4.8×4.8 * 2 dia.
7.2
10.3
Operating Force OF Max.
Releasing Force RF Min.
1.18 N {120 gf}
0.15 N {15 gf}
Pretravel PT Max.
Overtravel OT Min.
Movement Differential MD Max.
4.0 mm
1.6 mm
0.8 mm
Operating Position OP
20.7±1.2 mm
7
D2VW Sealed Miniature Basic Switch
D
2
V
W
Precautions
★Please refer to "Basic Switches Common Precautions" for correct use.
●Degree of Protection
Do not use the Switch underwater.
The Switch was tested and found to meet the conditions
necessary to meet the following standard, however, the test
checks for water intrusion after immersion for a specified time
period, not for switching operation underwater.
JIS C0920:
Degrees of protection provided by enclosures of electrical
apparatus (IP Code)
IEC 60529:
Degrees of protection provided by enclosures (IP Code)
Degree of protection: IP67
(check water intrusion after immersion
for 30 min submerged 1 m underwater)
●Protection Against Chemicals
Prevent the Switch from coming into contact with oil or
chemicals.
Otherwise, damage to or deterioration of Switch materials may
result.
●Soldering
• Connecting to Solder Terminals
When soldering the lead wire to the terminal, first insert the
lead wire conductor through the terminal hole and then
conduct soldering.
Complete the soldering at the iron tip temperature between
350 to 400°C within 5 seconds, and do not apply any external
force for 1 minute after soldering. Soldering at a excessively
high temperature or soldering for more than 5 s may
deteriorate the characteristics of the Switch.
●Mounting
Use M3 mounting screw with plane washers or spring washers to
securely mount the Switch. Tighten the screws to a torque of
0.39 to 0.59 N·m {4 to 6 kgf·cm}.
●Operating Body
With the pin plunger models, set
the Switch so that the plunger can
be pushed in from directly above.
Since the plunger is covered with
a rubber cap, applying a force
from lateral directions may cause
damage to the plunger or
reduction in the sealing capability.
●Handling
Handle the Switch carefully so as not to break the sealing
rubber.
●Using Micro Loads
Using a model for ordinary loads to open or close the contact of
a micro load circuit may result in faulty contact. Use models that
operate in the following range. However, even when using micro
load models within the following operating range, if inrush
current occurs when the contact is opened or closed, it may
increase the contact wear and so decrease durability. Therefore,
insert a contact protection circuit where necessary. The N-level
reference value applies for the minimum applicable load. This
value indicates the malfunction reference level for the reliability
level of 60% (λ60).
(JIS C5003)
The equation, λ60=0.5×10-6/operations indicates that the
estimated malfunction rate is less than operations
with a reliability level of 60%.
Cautions Correct Use
1
2,000,000
30
24
12
5
0
1 10 100 1,000
Current (mA)
0.1
1 mA
Operating
range for
general-load
models
D2VW-5
Operating range for
micro load models
D2VW-01
26 mA0.16 mA
100mA 160 mA
100 mA
Voltage (V)
8
D2VW Sealed Miniature Basic Switch
D
2
V
W
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Cat. No. C095-E1-07
0417(0207)(O)
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company Contact: www.omron.com/ecb