Connectivity solutions for photovoltaic power systems LC4(R)-CP - Connector Parts without cable LC4-CP 10 LC4-CP 11 LC4(R) photovoltaic chassis receptacle, with integrated locking and crimp contact, for front mounting LC4-CP 10: plug LC4-CP 11: socket 1. Temperature range LC4-CP 10 LC4-CP 11 -40 C/+85 C (IEC) -40 C/+90 C (UL) (+125 C upper limit temperature) halogen-free, UV-resistant m-PC, V1 according to UL 94 CuNiSi, tin-plated silicone PA GF, HB according to UL 94 2. Materials Insulating body Contact pin/bush Sealing (sockets only) Hexagonal nut 3. Mechanical data Insertion force1 20 N Withdrawal force1 10 N Retaining force of locking latches2 90 N 2 Mating cycles 50 Tightening torque nut 0.8-1.1 Nm Mating with photovoltaic connectors LC4 Protection degree3 IP 68 Connectable conductors crimp terminal stranded wire, insulated4 Section LC4-CP 1... 2.5 2.5 mm2 (AWG 14) Section LC4-CP 1... 4.0 4.0 mm2 (AWG 12) Section LC4-CP 1... 6.0 6.0 mm2 (AWG 10) 4. Electrical data (at Tamb 20 C) Contact resistance2 1 m Rated current (IEC)2 LC4-CP 1... 2.5 22 A at Tamb 85 C LC4-CP 1... 4.0 and 6.0 30 A at Tamb 85 C 2 Rated current (UL) 35 A at Tamb 20 C, all sections 5 Rated voltage 1000 V DC (IEC)/600 V DC (UL) Overvoltage category5 III (8 kV) Material group5 IIIa (IEC)/3 (UL) (CTI 225) Creepage distance/clearance between contact and touchable surface 28.3 mm Insulation resistance > 10 G 1 measured with a polished steel gauge, nominal thickness 4.0 mm 2 measured with a proper counterpart 3 according to IEC 60529/DIN EN 60529 only in mated condition with a proper counterpart IP X8 requirements under agreement between manufacturer and user 4 wire construction preferably according to IEC 60228 class 5, for more details see separate data sheet on request 5 according to DIN EN 60664/IEC 60664 resp. according to ANSI/UL 746A (R) Composition of type designation X Series: LC3 or LC4 Type of product CP Connector Part Configuration 10 chassis plug 11 chassis socket Polarity -1 + -2 - Locking option IT Internal locking is only unlockable with a Tool, otherwise it can be unlocked manually Cable section 2.5 2.5 mm (AWG 14) 4.0 4.0 mm (AWG 12) 6.0 6.0 mm (AWG 10) Package unit option 100 pieces (standard, individual parts in bulk, sorted) VP19 100 pieces (one plastic bag per connector, individual parts) LC4-CP 10 IT *a *b *c *d *e marking + on LC4-CP 1...-1, - on LC4-CP 1...-2 sealing chassis panel nut enclosed separately cable with mounted contact to be inserted into the housing after crimping process* *f port Standard packaging: individual parts in bulk, sorted in plastic bags of 100 pieces, in a cardboard box www.lumberg.com LC4-CP 10-1 IT 4.0 VP19 05/2013