HCF4041UBEY - STMicroelectronics - Datasheet.Directory

1/8September 2001

■BALANCED SINK AND SOURCE CURRENT:

APPROXIMATELY 4 TIMES STANDARD ”B”

DRIVE

■EQUALIZED DELAY TO TRUE AND

COMPLEMENT OUTPUTS

■QUIESCENT CURRENT SPECIFIED UP TO

20V

■STANDARDIZED SYMMETRICAL OUTPUT

CHARACTERISTICS

■5V, 10V AND 15V PARAMETRICRATINGS

■INPUT LEAKAGE CURRENT

II= 100nA (MAX) AT VDD = 18V TA=25°C

■100% TESTEDFOR QUIESCENT CURRENT

■MEETS ALL REQUIREMENTS OF JEDEC

JESD13B ” STANDARD SPECIFICATIONS

FOR DESCRIPTION OF B SERIES CMOS

DEVICES”

DESCRIPTION

The HCF4041UB is a monolithic integrated circuit

fabricated in Metal Oxide Semiconductor

technology available in DIP and SOP packages.

The HCF4041UB is a QUAD TRUE/

COMPLEMENT buffer consisting of n and p

channel units having low channel resistance and

high current (sourcing and sinking) capability. This

device is intended for use as a buffer, line driver,

or CMOS to TTL driver. It can be used as an

ultra-low powerresistor network driver for A/D and

D/A conversion, as a transmission line driver, and

in other applications where high noise immunity

and low power dissipation are primary design

requirements.

HCF4041UB

QUAD TRUE/COMPLEMENT BUFFER

PIN CONNECTION

ORDER CODES

PACKAGE TUBE T & R

DIP HCF4041UBEY

SOP HCF4041UBM1 HCF4041UM013TR

DIP SOP

HCF4041UB

2/8

INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION

TRUTH TABLE

FUNCTIONAL DIAGRAM

ABSOLUTE MAXIMUM RATINGS

Absolute Maximum Ratings are those values beyond which damage to thedevice may occur. Functional operation under these conditions is

not implied.

All voltage values are referred to VSS pin voltage.

PIN No SYMBOL NAME AND FUNCTION

3, 6, 10, 13 A, B, C, D Data Inputs

1, 4, 8, 11 E, G, K, M Data Outputs (TRUE)

2, 5, 9, 12 F,H, L, N Data Outputs

(COMPLEMENT)

7VSS Negative Supply Voltage

14 VDD Positive Supply Voltage

INPUTS OUTPUTS

(TRUE) OUTPUTS

(COMPLEMENT)

A, B, C, D E, G, K, M F,H, L, N

HHL

LLH

Symbol Parameter Value Unit

VDD Supply Voltage -0.5 to +22 V

VIDC Input Voltage -0.5 to VDD + 0.5 V

IIDC Input Current ±10 mA

PDPower Dissipation per Package 200 mW

Power Dissipation per Output Transistor 100 mW

Top Operating Temperature -55 to +125 °C

Tstg Storage Temperature -65 to +150 °C

HCF4041UB

3/8

RECOMMENDED OPERATING CONDITIONS

DC SPECIFICATIONS

The Noise Margin for both ”1” and ”0” level is: 1V min. with VDD=5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V

Symbol Parameter Value Unit

VDD Supply Voltage 3to20 V

IInput Voltage 0 to VDD V

Top Operating Temperature -55 to 125 °C

Symbol Parameter

Test Condition Value

Unit

(V) VO

(V) |IO|

(µA) VDD

(V)

TA=25°C-40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

ILQuiescent Current 0/5 5 0.02 1 30 30

µA

0/10 10 0.02 2 60 60

0/15 15 0.02 4 120 120

0/20 20 0.04 20 600 600

VOH High Level Output

Voltage 0/5 <1 5 4.95 4.95 4.95 V0/10 <1 10 9.95 9.95 9.95

0/15 <1 15 14.95 14.95 14.95

VOL Low Level Output

Voltage 5/0 <1 5 0.05 0.05 0.05 V10/0 <1 10 0.05 0.05 0.05

15/0 <1 15 0.05 0.05 0.05

VIH High Level Input

Voltage 0.5/4.5 <1 5 4 4 4 V1/9 <1 10 8 8 8

1.5/13.5 <1 15 12.5 12.5 12.5

VIL Low Level Input

Voltage 4.5/0.5 <1 5 1 1 1 V9/1 <1 10 2 2 2

13.5/1.5 <1 15 2.5 2.5 2.5

IOH Output Drive

Current 0/5 2.5 <1 5 -5.44 -12.8 -4.08 -4.08

0/5 4.6 <1 5 -1.36 -3.2 -1.02 -1.02

0/10 9.5 <1 10 -4.25 -10 -3.18 -3.18

0/15 13.5 <1 15 -16.1 -38 -12.1 -12.1

IOL Output Sink

Current 0/5 0.4 <1 5 1.36 3.2 1.02 1.02 mA0/10 0.5 <1 10 4.25 10 3.18 3.18

0/15 1.5 <1 15 16.1 38 12.11 12.11

IIInput Leakage

Current 0/18 Any Input 18 ±10-5 ±0.1 ±1±1µA

CIInput Capacitance Any Input 15 22.5 pF

HCF4041UB

4/8

DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb =25°C, CL= 50pF, RL= 200KΩ,t

r=t

f= 20 ns)

(*) Typical temperature coefficient for all VDD value is 0.3 %/°C.

TEST CIRCUIT

CL= 50pF or equivalent (includes jig and probe capacitance)

RL= 200KΩ

RT=Z

OUT of pulse generator (typically 50Ω)

Symbol Parameter Test Condition Value (*) Unit

VDD (V) Min. Typ. Max.

tPLH tPHL Propagation Delay Time 5 60 120 ns10 35 70

15 25 50

tTLH tTHL Output Transition Time 5 40 80 ns10 20 40

15 15 30

HCF4041UB

5/8

WAVEFORM 1 : PROPAGATION DELAY TIMES FOR NON INVERTING CONDITIONS (f=1MHz; 50%

duty cycle)

WAVEFORM 2 : PROPAGATION DELAY TIMES FOR INVERTING CONDITIONS (f=1MHz; 50% duty

cycle)

HCF4041UB

6/8

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

a1 0.51 0.020

B 1.39 1.65 0.055 0.065

b 0.5 0.020

b1 0.25 0.010

D 20 0.787

E 8.5 0.335

e 2.54 0.100

e3 15.24 0.600

F 7.1 0.280

I 5.1 0.201

L 3.3 0.130

Z 1.27 2.54 0.050 0.100

Plastic DIP-14 MECHANICAL DATA

P001A

HCF4041UB

7/8

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 1.75 0.068

a1 0.1 0.2 0.003 0.007

a2 1.65 0.064

b 0.35 0.46 0.013 0.018

b1 0.19 0.25 0.007 0.010

C 0.5 0.019

c1 45°(typ.)

D 8.55 8.75 0.336 0.344

E 5.8 6.2 0.228 0.244

e 1.27 0.050

e3 7.62 0.300

F 3.8 4.0 0.149 0.157

G 4.6 5.3 0.181 0.208

L 0.5 1.27 0.019 0.050

M 0.68 0.026

S8°(max.)

SO-14 MECHANICAL DATA

PO13G

HCF4041UB

8/8

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the

consequences of use of such information nor for any infringement of patents or other rights ofthird parties which may resultfrom

its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications

mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information

previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or

systems without express written approval of STMicroelectronics.

The ST logo is a registered trademark of STMicroelectronics

STMicroelectronics GROUP OF COMPANIES

Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco

Singapore - Spain - Sweden - Switzerland - United Kingdom

http://www.st.com