Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor with extended temperature range Ni4-S12-AZ31X/S100 M12 x 1 17/8 40 60 LED threaded barrel, M12 x 1 plastic, PA12-GF30 for temperatures up to 100C 2-wire AC, 20...250 VAC 2-wire DC, 10...300 VDC normally open cable connection Wiring diagram 4 BN BU Type Ident-No. Ni4-S12-AZ31X/S100 1302201 Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature 4 mm non-flush 3... 15 % 2 % 10 % 20 %, +70 C -25 ...+ 100 C Rated operational voltage (AC) UB 20... 250 VAC Rated operational voltage (DC) UB 10... 300 VDC Rated operational current (AC) Ie 100 mA Rated operational current (DC) Ie 100 mA Line frequency Max. OFF-state current Max. switching frequency Rated insulation voltage Surge Current Output function Max. voltage drop at Ie see derating curve 50... 60 Hz 1,7 mA 0,02 kHz 1,5 kV 1 A (10 ms max. 5 Hz) 2-wire, normally open 6 V Min. operational current Im 3 mA Housing style Dimensions Housing material Active face Max. fixing torque of coupling nut Wiring Cable Cable cross section Vibration resistance Shock resistance Degree of protection threaded barrel; M12 x 1 64 mm plastic, PA12-GF30 plastic, PA12-GF30 1 Nm cable O 5,2, LiYY-T105, PVC, 2 m 2 x 0,5 mm2 55 Hz (1 mm) 30 x g (11 ms) IP67 Switching status indication LED red Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil. Special inductive sensors versions can be used at temperatures of -40C up to +160C Derating curve Ie [mA] Z3 400 300 200 100 50 0 Z31 10 ........................... 70 80 90 100 T [C] Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor with extended temperature range Ni4-S12-AZ31X/S100 Mounting instructions Gap D Gap W Gap T Gap S Gap G Gap N minimum gap 3xB 3 x Sn 3xB 1,5 x B 6 x Sn 2 x Sn Diameter of active face B O 12 mm N G S D T W Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor with extended temperature range Ni4-S12-AZ31X/S100 Accessories Typ QM-12 IdentNo. 6945101 Description Dimension drawing quick-mount fixing clamp with dead-stop; material: chrome-plated brass external thread M16 x 1 22/4 o 12 BST-12B 6947212 19,5 34 fixing clamp with dead-stop; material: PA6 M5 20 28 40 18 o 12 30 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264