2N3485A Silicon PNP Transistor Data Sheet Description Applications SEMICOA Corporation offers: * General purpose switching * Low power * PNP silicon transistor * Screening and processing per MIL-PRF-19500 Appendix E * JAN level (2N3485AJ) * JANTX level (2N3485AJX) * JANTXV level (2N3485AJV) * QCI to the applicable level * 100% die visual inspection per MIL-STD-750 method 2072 for JANTXV * Radiation testing (total dose) upon request Features * * * * Hermetically sealed TO-46 metal can Also available in chip configuration Chip geometry 0600 Reference document: MIL-PRF-19500/392 Benefits * Qualification Levels: JAN, JANTX, and JANTXV * Radiation testing available Please contact SEMICOA for special configurations www.SEMICOA.com or (714) 979-1900 Absolute Maximum Ratings Parameter Collector-Emitter Voltage TC = 25C unless otherwise specified Symbol VCEO Rating 60 Collector-Base Voltage VCBO 60 Unit Volts Volts Emitter-Base Voltage VEBO 5 Volts IC 600 mA 0.5 3.08 2.0 11.43 0.325 87 mW mW/C mW mW/C -65 to +200 C Collector Current, Continuous Power Dissipation, TA = 25C Derate linearly above 37.5C Power Dissipation, TC = 25C Derate linearly above 25C PT PT Thermal Resistance RJA RJC Operating Junction Temperature Storage Temperature TJ TSTG Copyright 2010 Rev. F C/W SEMICOA Corporation 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 www.SEMICOA.com Page 1 of 2 2N3485A Silicon PNP Transistor Data Sheet ELECTRICAL CHARACTERISTICS characteristics specified at TA = 25C Off Characteristics Parameter Symbol Collector-Emitter Breakdown Voltage Collector-Base Cutoff Current Emitter-Base Cutoff Current V(BR)CEO Test Conditions IC = 10 mA Min Typ On Characteristics Units Volts 10 10 10 10 50 A nA A A nA 60 VCB = 60 Volts VCB = 50 Volts VCB = 50 Volts, TA = 150C VEB = 5 Volts VEB = 3.5 Volts ICBO1 ICBO2 ICBO3 IEBO1 IEBO2 Max Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0% Parameter Symbol hFE1 hFE2 hFE3 hFE4 hFE5 hFE6 DC Current Gain Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage VBEsat1 VBEsat2 VCEsat1 VCEsat2 Test Conditions IC = 0.1 mA, VCE = 10 Volts IC = 1.0 mA, VCE = 10 Volts IC = 10 mA, VCE = 10 Volts IC = 150 mA, VCE = 10 Volts IC = 500 mA, VCE = 10 Volts IC = 1.0 mA, VCE = 10 Volts TA = -55C IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA Min 40 40 40 40 40 20 Test Conditions VCE = 20 Volts, IC = 50 mA, f = 100 MHz VCE = 10 Volts, IC = 1 mA, f = 1 kHz VCB = 10 Volts, IE = 0 mA, 100 kHZ < f < 1 MHz VEB = 2 Volts, IC = 0 mA, 100 kHZ < f < 1 MHz Min Typ Max Units 120 1.3 2.6 0.4 1.6 Volts Max Units Volts Dynamic Characteristics Parameter Magnitude - Common Emitter, Short Circuit Forward Current Transfer Ratio Small Signal Short Circuit Forward Current Transfer Ratio Symbol |hFE| hFE Open Circuit Output Capacitance COBO Open Circuit Input Capacitance CIBO Typ 2.0 10 40 8 pF 30 pF Switching Characteristics Saturated Turn-On Time tON 45 ns Saturated Turn-Off Time tOFF 175 ns Copyright 2010 Rev. F SEMICOA Corporation 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 www.SEMICOA.com Page 2 of 2