TOSHIBA TC4040B P/BF/BFN TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC4040BP, TC4040BF, TC4040BFN TC4040B 12 STAGE RIPPLE-CARRY BINARY (Note) The JEDEC SOP (FN) is not available in COUNTER / DIVIDERS Japan. TC4040B is 12 stage ripple carry binary counter having asynchronous clear function. This counter advances its counting stage by falling edge of CLOCK input. When RESET input is placed H , all the circuits are reset 16 regardless of CLOCK input making all the outputs (Q1 through Q12) to be L. os : we : . P (DIP 16-P-300-2.54A) This is most suitable for frequency dividers, control circuits Weight : 1.00g (Typ.) and timing circuits. F (SOP16-P-300-1.27) FN (SOL16-P-150-1.27) Weight : 0.189 (Typ.) Weight : 0.139 (Typ.) MAXIMUM RATINGS PIN ASSIGNMENT CHARACTERISTIC SYMBOL RATING UNIT DC Supply Voltage Vop Vs5 -0.5~Vs5 + 20 Vv Input Voltage Vin Veg 0.5~Vpp + 0.5 V Output Voltage Vout Vss 0.5~Vpp + 0.5 Vv DC Input Current I +10 mA ees iN a2iff ~~ 116 Vpp Power Dissipation Pp 300 (DIP) / 180 (SOIC) | mW ; aes 20 115 Qi Operating T -A0~85 C Temperature Range opr a5 30 14 Qi0 Storage Temperature Tet ~65~150 C q7 4q 1] 13 Q8 Range stg Qa45[ M12 Q9 TRUTH TABLE Q3 6 [] 11 RESET CLOCKA RESET OUTPUT STATE Q2 70 [] 10 CLOCK H ALL OUTPUTS = "L Vss 8Q 9 Qt - L NO CHANGE (TOP VIEW) EL L ADVANCE TO NEXT STATE A\: Level Change , *: Dont Care 961001EBA2 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. 1997-12-11 1/7TOSHIBA LOGIC DIAGRAM TC4040B P/BF/BFN Ql Q2 Q3 Q4 Q5 Q6 & & && & KL & Lp Lp Lp Lp Lp Lp CLOCK 75 cK cK | cK cK | cK cK | ar Qr ar Qr ar Q R R R R R R q J q J q y RESET pet ____f 4 d 4 d 4 4 TR TR TR TR TR TR Q Q JQ Q JQ Q CK CK CK CK CK CK D D D D D D 1 15 14 12 13 4 Qi2 Qil Q10 Q9 Qs Q7 961001EBA2' @ The products described in this document are subject to foreign exchange and foreign trade control laws. otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or 1997-12-11 2/7TOSHIBA TC4040B P/BF/BFN RECOMMENDED OPERATING CONDITIONS (Vss = 0V) CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT DC Supply Voltage Vop 3 18 Vv Input Voltage Vin 0 _ Vop V STATIC ELECTRICAL CHARACTERISTICS (Vss = 0V) SYM- 40C 25C 85C CHARACTERISTIC |a5) | TEST CONDITION [Voo UNIT (vy | MIN. | MAX. | MIN. | TYP. | MAX. | MIN. | MAX. 5] 495| | 495] 500] | 495] ae te : Vou poutl <ah 10/ 9.95} | 995 /1000} | 995] P 9 IN= M'ssr VDD 1514.95 | |1495 {15.00 | |1495| | | 5] | 005 | | 000] 005 | | 005 lta 2 | Vou four] <1aA 10/ | 005 | | 000] 005 | | 005 P 9 IN=M'ss VoD 15 | 005 | | 000] 005 | | 005 Vou= 4.6V 5|-o61] |-o51/-10]/ | -o42) Von = 2.5V 5|-250/} |-2.10/ -40} | -1.70/ cue High lon | Von= 9.5V 10| -1.50/} | -1.30/ -22]} | -1.10) Vou = 13.5V 15| -4.00/] | -3.40/ -90] | -280) Vin=Vss, Vop mA Vo. = 0.4V 5| oo] 051) 15 | 0.42 Output Low VoL =0.5V 10 1.50} 1.30} 3.2 _ 1.10} Current OL | Vo, =1.5V 15| 4.00) 3.40/ 120] 2.80] Vin=Vss, Vop Vour=0.5v,45v | 5/ 35] 35 | 275) 35 | Input High y,, | Vour=1.0v, 9.0v | 10} 7.0 | 70 | 5.50) 70} Voltage 4] Vout = 1.5V, 13.5V] 15] 11.0 | 11.0 8.25, 11.0] | lout| <1pA Vv Vour=0.5v,4.5v | 5[ 15] 225, 15] 1.5 Input Low y, | Vour=1.0V, 9.0v | 10} 30|/ | asol 30] 3.0 Voltage } Vout =1.5V, 13.5V| 15, 40] 6.75} 40] 4.0 | lout| <1pA Input H" Level lig Vin = 18V 18 _ 0.1 _ 10-5 0.1 _ 1.0 Current | L Level] I, | Vj, =0V 13) |-o1] [-10->|-01/ | -1.0 5| 5 [oo05] 5 | 150 | vA cuescent Supply | 1 | Viv=Vss. Voo * 10| | 10 |0.010|] 10 | 300 15| | 20 |0.015| 20 | 600 * All valid input combinations. 1997-12-11 3/7TOSHIBA TC4040B P/BF/BFN DYNAMIC ELECTRICAL CHARACTERISTICS (Ta= 25C, Vss =0V, C, = 50pF) CHARACTERISTIC SYMBOL | TEST CONDITION MIN. TYP. MAX. UNIT Vpp(V) Output Transition Time > _ 70 200 . tru 10 _ 35 100 (Low to High) 15 _ 30 80 Output Transition Time > _ 70 200 trot 10 35 100 (High to Low) 15 _ 30 80 Propagation Delay Time > 7 160 360 Ne town 10 80 160 (CLOCK - Q1) 15 _ 65 130 Propagation Delay Time > 7 160 360 ant toHL 10 _ 80 160 ns (CLOCK - Q1) 15 65 130 Propagation Delay Time > 7 900 1800 a toLH 10 _ 450 900 (CLOCK - Q12) 15 360 720 . . _ 1 Propagation Delay Time > 900 800 tout 10 450 900 (CLOCK - Q12) 15 360 720 _ 1 2 Propagation Delay Time > 30 80 tox 10 70 120 (RESET - Q) 15 50 100 5 3.5 10 Max. Clock Frequency fe, 10 8.0 20 MHz 15 12.0 25 5 50 140 Min. Clock Pulse Width tw 10 20 60 15 15 40 Min. Pulse Width > i 100 200 tw 10 _ 40 80 ns (RESET) 15 _ 30 60 Min. Removal Time ' 1 a a (RESET - CLOCK) mn 15 100 Max. Clock Input Rise Time | trct 0 No Limit 5 Max. Clock Input Fall Time | ty. 6 B Input Capacitance Cin _ 5 7.5 pF 1997-12-11 4/7TOSHIBA TC4040B P/BF/BFN WAVEFORMS FOR MEASUREMENT OF DYNAMIC CHARACTERISTICS WAVEFORM 1 CLOCK 50% 00% ty trae 90% Q 50% 10% tout WAVEFORM 2 20ns 20ns > Lag A 90% RESET ZT 50% Nowe V 10% 10% ty CLOCK / 50% trem Q 50% tout 1997-12-11 5/7TOSHIBA TC4040B P/BF/BFN DIP 16PIN OUTLINE DRAWING (DIP16-P-300-2.54A) Unit in mm 16 8 eee % Py od) ee) 0 ! z & ne] 3 FP wy 1 8 == 19.75MAX 19.2540.2 0.95+0.1 u z 3] 0.735TYP | | 1.440.1 | 0.540.1 FI0.25 2.54 Weight : 1.00g (Typ.) SOP 16PIN (200mil BODY) OUTLINE DRAWING (SOP16-P-300-1.27) Unit in mm 16 9 ; BEBRARAEA Ny 9 = s| i > | toad oo HHA HAHAHA 4 1 8 o.7osTvP| | |_| 0.4310.1 Pere 55 Gy 27] 1 | 10.8MAX 10.340.2 ol FA = Coe ef 2 sar Lt 710.1 eT So | 0,820.2 Weight : 0.18g (Typ.) 1997-12-11 6/7TOSHIBA SOP 16PIN (150mil BODY) OUTLINE DRAWING (SOL16-P-150 -1.27) TC4040B P/BF/BFN Unit in mm Weight : 0.13g (Typ.) 0.505T YP (Note) This package is not available in Japan. 16 9 AAA AAA A 3.940.1 6.040.2 9.9+0.1 1 A BE AHO i 8 0.4240.07 era aEGy [ 710.1] : 1.37540.2 0.15345 0.17540.075 | 0.740.3 1997-12-11 TT