MBR10150
Document number: DS31499 Rev. 9 - 2 1 of 4
www.diodes.com April 2011
© Diodes Incorporated
MBR10150CTP
10A SCHOTTKY BARRIER RECTIFIER
Features
• Low Forward Voltage Drop
• Soft, Fast Switching Capability
• Schottly Barrier Chip
• ITO-220S Heat Sink Tab Electrically Isolated from Cathode
• UL Approval in Accordance with UL 1557, Reference No.
E94661
Mechanical Data
• Case: ITO-220S
• Case Material: Molded Plastic, UL Flammability Classification
Rating 94V-0
• Terminals: Matte Tin Finish annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Weight: 1.335 grams (approximate)
Ordering Information (Note 1)
Part Number Case Packaging
MBR10150CTP ITO-220S 50 pieces/tube
Notes: 1. For packaging details, go to our website at http://www.diodes.com.
Marking Information
Package Pin Out
Confi
g
uration
123
4
Anode
Common
Cathode Anode
Isolated
Top View Bottom View
MBR10150CTP = Product Type Marking Code
A
B = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last two digits of year (ex: 08 = 2008)
WW = Week (01 - 53)
10150CTP
YYWW AB
MBR
MBR10150
Document number: DS31499 Rev. 9 - 2 2 of 4
www.diodes.com April 2011
© Diodes Incorporated
MBR10150CTP
Maximum Ratings (Per Leg) @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VRM 150 V
Average Rectified Output Current (Per Leg) IO 5 A
(Total) 10
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load IFSM 105 A
Isolation Voltage
From Terminal Heatsink t = 1 min. VAC 2000 V
Thermal Characteristics (Per Leg)
Characteristic Symbol Value Unit
Typical Thermal Resistance Junction to Case R
θ
JC 3 °C/W
Operating and Storage Temperature Range TJ, TSTG -65 to +175 °C
Electrical Characteristics (Per Leg) @TA = 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop VF - - 0.91
V IF = 5A, TJ = 25ºC
- - 0.75 IF = 5A, TJ = 125ºC
Leakage Current (Note 2) IR - - 0.05
mA VR = 150V, TJ = 25ºC
- - 20 VR = 150V, TJ = 125ºC
Notes: 2. Short duration pulse test used to minimize self-heating effect.
0 200 400 600 800 1,000 1,200
0.0001
0.001
0.01
0.1
1
10
100
I, INS
T
AN
T
ANE
O
U
S
F
O
R
WA
R
D
C
U
R
R
EN
T
(A)
F
Fig. 1 Typical Forward Characteristics
V , INSTANTANEOUS FORW ARD VOLT AGE (mV)
F
T = 25°C
A
T = 85°C
A
T = 125°C
A
T = 150°C
A
0.01
0.1
1
10
100
1,000
0306090120150
Fig. 2 Typical Reverse Characteristics
V , INSTANTANEOUS REVERSE VOL TAGE (V)
R
I , INSTANTANEOUS REVERSE CURRENT (µA)
R
T = 25°C
A
T = 85°C
A
T = 125°C
A
T = 150°C
A
MBR10150
Document number: DS31499 Rev. 9 - 2 3 of 4
www.diodes.com April 2011
© Diodes Incorporated
MBR10150CTP
0
5
10
25 50 75 100 125 150
Fig. 3 Forward Current Derating Curve
T , AMBIENT TEMPERA TURE (°C)
A
I , AVERAGE FORWARD CURRENT (A)
F(AV)
R = R
Total Device
θθ
JA JC
R = 21°C/W
Per Element
θ
JA
Package Outline Dimensions
ITO-220S
DIM. MIN. MAX. TYP.
A 4.52 4.62 4.57
A1 1.17 1.39 −
A2 2.57 2.77 2.67
b 0.72 0.95 0.84
b2 1.15 1.54 1.26
c 0.356 0.61 −
D 14.22 16.51 15.00
D1 8.60 8.80 8.70
D2 13.68 14.08 −
e 2.49 2.59 2.54
e1 4.98 5.18 5.08
E 10.01 10.21 10.11
E1 6.86 8.89 −
H1 5.85 6.85 −
L 13.30 13.90 13.60
L1 −4.00 −
P 3.54 4.08 −
Q 2.54 3.42 −
All Dimensions in mm
E
D1
Lb2
b
e
A2
+
A
D
7 Ref
°
5 Ref
°
+
D2
H1
E1
5 Ref
°
A1
c
e1
Q
ØP
1.7 Ref
5 Ref
°
5 Ref
°
L1
Ø1.5
Dp 0.1 max
MBR10150
Document number: DS31499 Rev. 9 - 2 4 of 4
www.diodes.com April 2011
© Diodes Incorporated
MBR10150CTP
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
