CPH3112 / CPH3212 Ordering number : ENN6147D CPH3112 / CPH3212 PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Applications * Relay drivers, lamp drivers, motor drivers, flash. Features * * * * * Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3121 Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--50)100 V Collector-to-Emitter Voltage VCES (--50)100 V Collector-to-Emitter Voltage VCEO (--)50 V Emitter-to-Base Voltage VEBO (--)6 V (--)5 A Base Current IC ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Collector Current Collector Current (Pulse) Mounted on a ceramic board (600mm20.8mm) (--)7 A (--)1.2 A 0.9 W 150 C --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Conditions VCB=(--)40V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(--)500mA VCE=(--)10V, IC=(--)500mA VCB=(--)10V, f=1MHz Ratings min typ max 200 Unit (--)0.1 A (--)0.1 A 560 (250)330 Marking : CPH3112 : AM, CPH3212 : CM (50)26 MHz pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000305 / 91003 TS KT TA-4228 / 63003TS KT TA-4189 / 71299TS (KOTO) TA-1762 No.6147-1/5 62005EA MS IM TB-00001408 / CPH3112 / CPH3212 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage V(BR)CES V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time Storage Time Ratings Conditions min typ IC=(--)2A, IB=(--)40mA IC=(--)2A, IB=(--)40mA Unit max (--225)100 (--450)150 (--)0.80 IC=(--)10A, IE=0A IC=(--)100A, RBE=0 mV (--)1.2 V (--50)100 V (--50)100 V (--)50 V IC=(--)1mA, RBE= IE=(--)10A, IC=0A (--)6 V ton tstg See specified Test Circuit. (39)32 See specified Test Circuit. (225)420 ns tf See specified Test Circuit. (25)28 ns Fall Time Package Dimensions ns Switching Time Test Circuit unit : mm 7015-003 IB1 PW=20s D.C.1% 0.15 0.4 OUTPUT IB2 INPUT 0.2 0.6 3 VR 24 1.6 2.8 50 0.6 1 RB 0.05 + 100F 2 + 470F 1.9 VBE= --5V 2.9 0.7 0.9 0.2 1 : Base 2 : Emitter 3 : Collector IC=20IB1= --20IB2=2.5A For PNP, the polarity is reversed. SANYO : CPH3 IC -- VCE IC -- VCE 5 CPH3212 0 --8 A 0m --30mA --20mA 0m A --9 --2 --10mA 30mA 20mA 3 10mA 2 1 --1 IB=0mA --300 Collector-to-Emitter Voltage, VCE -- mV 0 Collector Current, IC -- A --0.8 --0.7 --0.6 --0.5 25C Ta=75 --0.2 --25C C --0.4 300 500 IT06514 IC -- VBE 0.8 0.7 0.6 0.5 0.4 0.3 0.2 --0.1 400 CPH3212 VCE=2V 0.9 --0.3 200 1.0 CPH3112 VCE= --2V --0.9 100 Collector-to-Emitter Voltage, VCE -- mV IT06513 IC -- VBE --1.0 IB=0mA 0 --500 --400 --25C --200 C --100 Ta=75 0 25C 0 Collector Current, IC -- A 4 60m mA --7 40mA mA -60 0mA - A 50m 100 -50m mA - --4 Collector Current, IC -- A A A --40m --1 0 Collector Current, IC -- A CPH3112 A 70 mA 80m A 90m A --5 --3 VCC=12V 0.1 0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 Base-to-Emitter Voltage, VBE -- V --0.8 --0.9 IT06515 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Base-to-Emitter Voltage, VBE -- V 0.8 0.9 IT06516 No.6147-2/5 CPH3112 / CPH3212 hFE -- IC 1000 CPH3112 VCE= --2V 7 DC Current Gain, hFE 3 25C --25C 2 7 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 2 100 7 5 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 2 3 5 7 1.0 2 3 2 100 7 5 3 2 2 3 5 7 0.1 2 3 5 7 1.0 3 2 10 --1.0 2 3 5 7 2 --10 3 5 Collector-to-Base Voltage, VCB -- V 7 5 3 2 --100 7 C 75 = Ta 3 C 5 2 --25 2 2 3 5 7 --0.1 2 C 3 5 7 --1.0 Collector Current, IC -- A 7 5 3 2 2 2 3 5 7 --10 IT06523 3 5 7 2 10 3 5 Collector-to-Base Voltage, VCB -- V 7 100 IT06522 VCE(sat) -- IC 1000 CPH3112 IC / IB=20 5 100 10 1.0 7 --100 IT06521 VCE(sat) -- IC --1000 5 CPH3212 f=1MHz Output Capacitance, Cob -- pF 5 3 IT06520 Cob -- VCB 2 7 2 Collector Current, IC -- A CPH3112 f=1MHz 100 5 7 10 IT06518 CPH3212 VCE=10V IT06519 2 3 f T -- IC 5 10 0.01 5 Cob -- VCB 3 5 7 0.1 7 3 2 3 1000 CPH3112 VCE= --10V 5 2 Collector Current, IC -- A f T -- IC 7 --10 --0.01 5 0.01 5 7 --10 IT06517 --25C 2 7 1000 Output Capacitance, Cob -- pF 3 100 Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Ta=75C 25C 100 CPH3212 IC / IB=20 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV DC Current Gain, hFE 5 Ta=75C 10 --0.01 CPH3212 VCE=2V 7 5 5 --0.01 hFE -- IC 1000 5 3 2 100 7 5 C 75 = Ta 3 2 10 0.01 C --25 2 3 5 7 0.1 2 3 C 25 5 7 1.0 Collector Current, IC -- A 2 3 5 7 10 IT06524 No.6147-3/5 CPH3112 / CPH3212 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3112 IC / IB=50 7 5 3 2 C 75 --100 Ta= 7 5 --25 3 C 25 C 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- mV CPH3112 IC / IB=50 2 --1000 Ta= --25C 7 25C 75C 5 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A s Collector Current, IC -- A s 0 era s s 1m 0m 0 ms 10 op 50 DC tio n 3 2 0.1 7 5 3 2 CPH3112 / CPH3212 Ta=25C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm20.8mm) 0.01 0.1 2 3 100 7 5C 7 Ta= 5 3 C 25 --25C 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT06526 VBE(sat) -- IC CPH3212 IC / IB=50 2 1000 Ta= --25C 7 25C 75C 5 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT06528 Collector Current, IC -- A PC -- Ta CPH3112 / CPH3212 10 1.0 7 5 2 1.2 ICP=7A IC=5A 3 2 3 2 0.01 5 7 --10 IT06527 10 10 7 5 5 3 ASO 2 7 Collector Current, IC -- A VBE(sat) -- IC 3 CPH3212 IC / IB=50 1000 10 0.01 5 7 --10 IT06525 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV --1000 VCE(sat) -- IC 2 Collector Dissipation, PC -- W Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Emitter Voltage, VCE -- V 1.0 M 0.9 ou nte 0.8 do na ce ram 0.6 ic bo ard (6 00 0.4 mm 2 0 .8m 0.2 m) 0 5 7 100 IT06529 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT06530 No.6147-4/5 CPH3112 / CPH3212 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.6147-5/5