MSM (Military M83401)
Vishay Dale
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ040 to RZ090, Single-In-Line, Molded SIP
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31514
1Revision: 01-Jun-10
FEATURES
•Isolated, bussed and dual terminator schematics available
•MIL-PRF-83401 qualified
•0.195" (4.95 mm) “A” and 0.350" (8.89 mm) “C” maximum
seated heights
•Thick film resistive elements
•TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C)
characteristic
•All device leads are hot-solder dipped
•Rugged molded case construction
•Compatible with automatic insertion equipment
•100 % screen tested per group A, subgroup 1 of
MIL-PRF-83401
•All devices are capable of passing the MIL-STD-202,
method 210, condition D “Resistance to Soldering Heat”
test
•Available in tube pack
Notes
(1) ± 2 % standard, ± 1 % and ± 5 % available
(2) K = ± 100 ppm/°C; M = ± 300 ppm/°C
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL/
PIN NO/
PROFILE
MIL
STYLE
MIL
SPEC.
SHEET
SCHEMATIC
POWER RATING RESISTANCE
RANGE
Ω
TOLERANCE (1)
± %
TEMPERATURE
COEFFICIENT (2)
(- 55 °C to + 125 °C)
± ppm/°C
WEIGHT
g
ELEMENT
P70 °C
W
PACKAGE
P70 °C
W
MSM06C RZ040 04
01 (C) 0.20 1.00 10 to 1M
1, 2, 5 100, 300 0.703 (G) 0.20 0.60 10 to 1M
05 (H) 0.11 0.88 Consult factory
MSM08C RZ050 05
01 (C) 0.20 1.40 10 to 1M
1, 2, 5 100, 300 0.903 (G) 0.20 0.80 10 to 1M
05 (H) 0.11 1.32 Consult factory
MSM10C RZ060 06
01 (C) 0.20 1.80 10 to 1M
1, 2, 5 100, 300 1.103 (G) 0.20 1.00 10 to 1M
05 (H) 0.11 1.80 Consult factory
MSM06A RZ070 07
01 (C) 0.12 0.60 10 to 1M
1, 2, 5 100, 300 0.403 (G) 0.12 0.36 10 to 1M
05 (H) 0.07 0.60 Consult factory
MSM08A RZ080 08
01 (C) 0.12 0.84 10 to 1M
1, 2, 5 100, 300 0.503 (G) 0.12 0.48 10 to 1M
05 (H) 0.07 0.84 Consult factory
MSM10A RZ090 09
01 (C) 0.12 1.08 10 to 1M
1, 2, 5 100, 300 0.603 (G) 0.12 0.60 10 to 1M
05 (H) 0.07 1.08 Consult factory
Document Number: 31514 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 01-Jun-10 2
MSM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401
Qualified, Type RZ040 to RZ090, Single-In-Line, Molded SIP Vishay Dale
DIMENSIONS in inches (millimeters)
SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING
04 = 6 pin, “C” profile K = 100 ppm F = ± 1 % C = Bussed D03 = Tin/lead, tube
DSL = Tin/lead, tube,
single lot date code
05 = 8 pin, “C” profile M = 300 ppm G = ± 2 %G = Isolated
06 = 10 pin, “C” profile J = ± 5 %
07 = 6 pin, “A” profile 10R0 = 10 Ω
08 = 8 pin, “A” profile 3302 = 33 k Ω
09 = 10 pin, “A” profile 1004 = 1 M Ω
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340107K1003GCD03 (preferred part numbering format)
Historical Part Number example: M8340107K1003GC (will continue to be accepted)
MIL
STYLE
M83401
RESISTANCE
VALUE
3 digit significant
figure, followed by
a multiplier
M83401 07 K 1003 G C D03
MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE TOLERANCE SCHEMATIC PACKAGING
SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING
MIL
STYLE
RESISTANCE
VALUE
M83401 04 = 6 pin, “C” profile K = 100 ppm Per std. Mil. Spec F = ± 1 % H = Dual
05 = 8 pin, “C” profile M = 300 ppm (see Impedence G = ± 2 %terminator
06 = 10 pin, “C” profile Codes table) J = ± 5 %
07 = 6 pin, “A” profile
08 = 8 pin, “A” profile
09 = 10 pin, “A” profile
New Global Part Numbering: M8340104KA001GHD03 (preferred part numbering format)
M83 4 0 1 0 4 K A 0 0 1G HD 0 3
Historical Part Number example: M8340104KA001GH (will continue to be accepted)
M83401 04 K A001 GH
D03
MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE TOLERANCE SCHEMATIC PACKAGING
M 3
8 K 3
0
4 0
0 C 3
0
1 1
7 0 D
G
D03 = Tin/lead, tube
DSL = Tin/lead, tube,
single lot date code
“A” Profile
0.100 ± 0.005
(2.54 ± 0.127)
Non-Accumulative
0.040 + 0.009
- 0.015
(1.02 + 0.229
- 0.381) 0.017 ± 0.004
[0.432 ± 0.102]
0.135 + 0.015
- 0.010
(3.43 + 0.381
- 0.254)
0.030 + 0.005
- 0.015
(0.762 + 0.127
- 0.381)
B
C Equal Space
0.187 + 0.008
- 0.010
(4.75 + 0.203
- 0.254)
A
Pin # 1
“C” Profile
B
C Equals Spaces
0.342 + 0.008
- 0.010
(8.69 + 0.203
- 0.254)
0.135 + 0.015
- 0.010
(3.43 + 0.381
- 0.254)
0.040 + 0.009
- 0.015
(1.02 + 0.229
- 0.381)
0.100 ± 0.005
(2.54 ± 0.127)
Non-Accumulative
0.030 + 0.005
- 0.015
(0.762 + 0.127
- 0.381)
A
Pin # 1
0.017 ± 0.004
(0.432 ± 0.102)
VISHAY DALE MODEL
MSM06
MSM08
MSM10
B
0.500
(12.70)
0.700
(17.78)
0.900
(22.86)
A
0.583 ± 0.015
(14.81 ± 0.381)
0.783 ± 0.015
(19.89 ± 0.381)
0.983 ± 0.015
(24.97 ± 0.381)
C
5
7
9
0.098 max.
(2.49 max.)
0.012 ± 0.004
(0.305 ± 0.102)
0.098 max.
(2.49 max.)
0.012 ± 0.004
(0.305 ± 0.102)
TECHNICAL SPECIFICATIONS
PARAMETER UNIT MSM SERIES
Maximum Operating Voltage VDC 50
Voltage Coefficient of Resistance Veff < 50 ppm
Dielectric Strength VAC 200 min.
Insulation Resistance Ω10 000 M
Operating Temperature Range °C - 55 to + 125
Storage Temperature Range °C - 55 to + 150
MECHANICAL SPECIFICATIONS
Body Molded epoxy
Terminals Copper alloy, hot-solder dipped
Solderability Per MIL-PRF-83401
CAGE CODE: 91637 and SH903
MSM (Military M83401)
Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ040 to RZ090, Single-In-Line, Molded SIP
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31514
3Revision: 01-Jun-10
Note
(1) Offered for the M83401/09 product only
DERATING
01 Schematic
03 Schematic
MILITARY IMPEDANCE CODES
CODE R1 (Ω) R2 (Ω)CODE R1 (Ω) R2 (Ω)
A001 82 130 A011 330 680
A002 120 200 A012 1.5K 3.3K
A003 130 210 A013 3K 6.2K
A004 160 260 A014 180 270
A005 180 240 A015 270 270
A006 180 390 A016 560 560
A007 220 270 A017 560 1.2K
A008 220 330 A018 620 2.7K
A009 330 390 A019 (1) 150 1K
A010 330 470 A020 (1) 1K 1K
“A” Profile
1.08
0.12
MSM10A Package
MSM08A Package
MSM06A Package
Single Resistor
- 55 0+ 25 + 70 + 125 + 150
0.60
0.84
Power Rating (W)
Ambient Temperature °C
1.00
1.40
1.80
0.20
“C” Profile
MSM10C Package
MSM08C Package
MSM06C Package
Single Resistor
- 55 0 + 25 + 70 + 125 + 150
Power Rating (W)
Ambient Temperature °C
0.60
0.48
0.36
0.12
MSM10A Package
MSM08A Package
MSM06A Package
Single Resistor
“A” Profile
- 55 0 + 25 + 70 + 125 + 150
Power Rating (W)
Ambient Temperature °C
0.20
1.00
0.80
Single Resistor
MSM06C Package
MSM10C Packag e
MSM08C Package
0.60
“C” Profile
- 55 0 + 25 + 70 + 125 + 150
Ambient Temperature °C
Power Rating (W)
Document Number: 31514 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 01-Jun-10 4
MSM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401
Qualified, Type RZ040 to RZ090, Single-In-Line, Molded SIP Vishay Dale
05 Schematic
“A” Profile
1.08
0.84
0.60
0.07 Single Resistor
MSM06A Package
MSM08A Package
MSM10A Package
- 55 0 + 25 + 70 + 125 + 150
Ambient Tem
p
erature °C
Power Rating (W)
“C” Profile
1.80
1.32
0.88
0.1 1
MSM10C Package
MSM08C Package
MSM06C Package
Single Resistor
- 55 0 + 25 + 70 + 125 + 150
Ambient Temperature °C
Power Rating (W)
CIRCUIT APPLICATIONS
01 Schematic 5, 7 or 9 resistors with one pin common
“A” Profile “C” Profile
MSM06A01 (M8340107xxxxxxC) MSM06C01 (M8340104xxxxxxC)
MSM08A01 (M8340108xxxxxxC) MSM08C01 (M8340105xxxxxxC)
MSM10A01 (M8340109xxxxxxC) MSM10C01 (M8340106xxxxxxC)
The MSM06A01, MSM08A01, MSM10A01, MSM06C01, MSM08C01 and
MSM10C01 molded single-in-line resistor networks provide the user with a
choice of 5, 7 or 9 nominally equal resistors, each connected to a common
pin (Pin No. 1).
Commonly used in the following applications:
• “Wired OR” Pull-up • Open Collector Pull-up
• Power Gate Pull-up • TTL Input Pull-down
• MOS/ROM Pull-up/Pull-down • TTL Unused Gate Pull-up
03 Schematic 3, 4 or 5 isolated resistors
“A” Profile “C” Profile
MSM06A03 (M8340107xxxxxxG) MSM06C03 (M8340104xxxxxxG)
MSM08A03 (M8340108xxxxxxG) MSM08C03 (M8340105xxxxxxG)
MSM10A03 (M8340109xxxxxxG) MSM10C03 (M8340106xxxxxxG)
The MSM06A03, MSM08A03, MSM10A03, MSM06C03, MSM08C03 and
MSM10C03 molded single-in-line resistor networks provide the user with a
choice of 3, 4 or 5 nominally equal resistors. Each resistor is isolated from all
others.
Commonly used in the following applications:
• “Wired OR” Pull-up • Long-Line Impedance Balance
• Power Driven Pull-up • LED Current Limiting
• Power Gate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
05 Schematic 4, 6 or 8 resistor pairs
“A” Profile “C” Profile
MSM06A05 (M8340107xxxxxxH) MSM06C05 (M8340104xxxxxxH)
MSM08A05 (M8340108xxxxxxH) MSM08C05 (M8340105xxxxxxH)
MSM10A05 (M8340109xxxxxxH) MSM10C05 (M8340106xxxxxxH)
The MSM06A05, MSM08A05, MSM10A05, MSM06C05, MSM08C05
and MSM10C05 molded single-in-line resistor networks provide the
user with a choice of 4, 6 or 8 pair of R1/R2 resistor values for pulse
squaring and TTL dual-line terminating requirements.
1 2 3 n-1 n
1 2 3 4 n-1 n
1 2 3 n-1 n
R
2
R
1
MSM (Military M83401)
Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ040 to RZ090, Single-In-Line, Molded SIP
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31514
5Revision: 01-Jun-10
PERFORMANCE
TEST CONDITIONS MAX. ΔR (TYPICAL TEST LOTS)
Power Conditioning 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”
for 100 h ± 4 h at + 25 °C ambient temperature ± 0.50 % ΔR
Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR
Short Time Overload 2.5 x rated working voltage for 5 s ± 0.25 % ΔR (Characteristic K)
± 0.50 % ΔR (Characteristic M)
Low Temperature Operation 45 min at full rated working voltage at - 65 °C ± 0.25 % ΔR (Characteristic K)
± 0.50 % ΔR (Characteristic M)
Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR
Resistance to Soldering Heat Leads immersed in + 260 °C solder to within 1/16" of body for 10 s ± 0.25 % ΔR
Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR
Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % ΔR
Load Life 1000 h at + 70 °C, rated power applied 1.5 h “ON”,
0.5 h “OFF” for full 1000 h period
± 0.50 % ΔR (Characteristic K)
± 2.00 % ΔR (Characteristic M)
Terminal Strength 4 1/2 pound pull for 30 s ± 0.25 % ΔR
Insulation Resistance 10 000 MΩ (minimum) -
Dielectric Withstanding
Voltage No evidence of arcing or damage (200 VRMS for 1 min) -
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
