DESCRIPTION OF TERMINOLOGY Electro-optical characteristics Absolute Max. Ratings ITEMS SYMBOLS DEFINITION UNIT Power dissipation (Pd) Power dissipated by forward current and forward voltage (mW) Forward current (IF) Current from anode to cathode (mA) Peak forward current (IFM) Forward peak current driven during pulse lighting (mA) Current derating (IF) Derating over 25C ambient temperature Forward voltage (VF) Voltage drop when forward current goes from anode to cathode Reverse current (IR) Leakage current when bias voltage is applied from cathode to anode (A) Luminous intensity (IV) Flux in lumens per unit of solid angle on optical axis (mcd) Peak wavelength (p) Wavelength at which radiant intensity becomes greatest (nm) Spectral line half width () Wavelength range in which radiant intensity becomes more than 50% of its peak value (nm) (mA/C) (V) RELIABILITY TEST AND MEASURING METHOD Items to be Guaranteed for LEDs STANDARDS TEST ITEM SAMPLE SIZE TEST CONDITION JIS C 7035 Added documents JIS C 7021 Resistance to Soldering Heat A-1 JIS C 7021 Temperature Cycling A-4 JIS C 7021 Humidity (Steady State) B-11 JIS C 7021 High Temperature (Storage) B-10 JIS C 7021 Low Temperature (Storage) A-12 JIS C 7021 Lead Tension A-11 JIS C 7021 Vibration Fatigue A-10 Operating Endurance Test Ta=25C, IF=Maximum Rated Current, t=1000 Hrs. 25 260+5C, 10+1sec., 3mm from package base 25 -30C (30 min) to normal temperature (15 min) to +100C (30 min) To normal temperature (15 min) 5 cycles 25 Ta=60+2C, RH=90+5%, t=1000Hr 25 Ta=100+2C, t=1000Hr 25 Ta=30+2C, t=1000Hr 25 *1kg/10 sec. one time (thin lead: 0.5kg) 10 10G, 100 to 2000Hz sweep for 20 min., 2 hours for directions X, Y and Z 10 Structural Drawing for Numeric Display Measuring Method Luminous Intensity (Iv) Detector Epoxy resin 100mm 7 (0.01sr) Dark room LED chip Lamp house LED A Constant Current Power Supply 2 Lead frame HANDLING PRECAUTIONS Soldering Conditions TYPES SOLDERING IRON DIP SOLDERING REFLOW SOLDERING Temperature at tip of iron: 300C max. (30 W max.) Soldering time: 3 sec. max Location: At least 3.0mm away from resin body Pre-heating: 80C max. (Resin surface temperature) 60 sec. max Bath temperature: 260C max. Dipping time: 5 sec. max. Location: At least 3.0mm away from resin body Not recommended Cleaning Residual solder of flux left on the LED housing could reduce intensity and could affect the optical characteristics. Excess flux can be removed by the following chemical method: 1. Cleaning solvents (dipping time: 3 minutes maximum at normal temperature) * Ethyl alcohol * Isopropyl alcohol * Pure water (after cleaning, the water must be removed by drying) * Drying condition: 90C max., 30 sec. max. and 4 times max. 2. The effect of ultrasonic cleaning on the LED resin body depends on such factors as the oscillator output, size of PCB and LED mounting method. Ultrasonic cleaning is strongly recommended after confirming that there are no problems. 1. Ultrasonic wave frequency: 28 kHz or 40 kHz 2. Output: 20 W/I 3. The solvent for freon equivalent (recommended after confirming that there are no problems). * AK-225AES * Clean through * Pine alpha ST-100S Chemicals Ethyl alcohol Isopropyl alcohol Pure water Freon substitute detergent AK225AES Clean through 705H Pine alpha ST-100S * DIP Soldering and cleaning is not recommended for Alpha-Numeric (AAR121and AAA121) LED displays. 3 SUPER BRIGHT LED LIGHT BAR MODULE Stanley's MU series of super-bright LED light bar modules can be selected from a wide variety of configurations and colors to suit a broad range of requirements. By using front mask patterns, including letters, numbers and even graphics, this series is usable for a myriad of display applications. Description of Part Number MU 0 2 - 2 2 0 1 Shape Code Emitted color Suffix 2.Red 3.Orange 4.Yellow 5.Green / Pure Green Characteristics by Color Ta=25C Absolute Maximum Ratings Forward Voltage Reverse Current VF IR Wavelength Reverse Voltage Operating Temperature Storage Temperature Derating IF 1 Peak Forward Current I FM 2 VR Topr 3 Tstg 4 IF TYP. MAX. IF MAX. VR T Y P. Forward Current Material Emitted Color Part No. Electro-Optical Characteristics Peak p Spectral Line Half Width IF TYP 2 GaAIAs (Red) 30 60 4 -40~+85 -40~+85 0.40 1.7 2.0 20 20 4 660 30 20 3 GaAsP (Orange) 25 60 4 -40~+85 -40~+85 0.33 2.2 2.5 20 20 4 605 30 20 4 GaP (Yellow) 30 60 4 -40~+85 -40~+85 0.40 2.1 2.5 20 20 4 570 30 20 5 1 GaP (Green) 25 60 4 -40~+85 -40~+85 0.33 2.2 2.5 20 20 4 555 30 20 5 2 GaP (Green) 30 60 4 -40~+85 -40~+85 0.40 2.1 2.5 20 20 4 560 30 20 5 5 GaP (Pure Green) 25 60 4 -40~+85 -40~+85 0.33 2.2 2.5 20 20 4 555 30 20 9 1 9 2 9 3 GaAIAs (Red) 30 60 4 -40~+85 -40~+85 0.40 1.7 2.0 20 20 4 660 30 20 GaP (Green) 25 60 4 -40~+85 -40~+85 0.33 2.2 2.5 20 20 4 555 30 20 GaAIAs (Red) 30 60 4 -40~+85 -40~+85 0.40 1.7 2.0 20 20 4 660 30 20 GaP (Yellow) 30 60 4 -40~+85 -40~+85 0.40 2.1 2.5 20 20 4 570 30 20 GaAIAs (Red) 30 60 4 -40~+85 -40~+85 0.40 1.7 2.0 20 20 4 660 30 20 GaAsP (Orange) 25 60 4 -40~+85 -40~+85 0.33 2.2 2.5 20 20 4 605 30 mA mA V mA A V Units C mA/C V nm 20 mA 1 : MU91, MU92 and MU93 series are all 30 mA. 2 : tw 2 msec, duty 1/5 However, for the MU91, MU92 and MU93 series, 300 mA for red and 100 mA for yellow, orange and pure green (tw 1 msec, duty 1/20) 3 4 : For MU91, MU92 and MU93 series, the temperature range is -30C to +85C. Ta=25C Characteristics by Shape Emitted Color Part No. MU02-2201 Resin Color Red MU02-2205 MU02-3201 Orange MU02-3205 MU02-4201 Yellow MU02-4205 No. of Chips Absolute Max. Rating Electro-Optical Characteristics Luminous Intensity Power Dissipation Pd MIN. TYP. fig. IF Red 4 240 20 42 20 Milky White 4 240 20 42 20 Orange 4 250 10 20 20 Milky White 4 250 10 20 20 Yellow 4 300 20 42 20 4 300 20 42 20 Milky White 14 x 14 (15 x 15) Pure Green Green 4 250 10 20 20 MU02-5202 Green Green 4 300 15 32 20 MU02-5205 Pure Green Milky White 4 250 10 20 20 4 240 8 12 20 4 250 8 12 20 Red Pure Green MU03-2201 Red MU03-2205 MU03-3201 Orange MU03-3205 MU03-4201 Yellow MU03-4205 MU03-5201 Green Red 2 120 10 20 20 Milky White 2 120 10 20 20 Orange 2 125 5 10 20 Milky White 2 125 5 10 20 Yellow 2 150 10 20 20 2 150 10 20 20 Green 2 125 3 7 20 Milky White Pure Green 6x9 (7 x 10) MU03-5202 Green Green 2 150 8 16 20 MU03-5205 Pure Green Milky White 2 125 5 10 20 Red Milky White 1 60 5 7 20 1 62.5 3 4 pcs mW MU03-9201 Pure Green Units Package Dimensions mm 1 2 3 20 mcd mA Tolerance : 0.25mm unit : mm 15 14 10 9 8 7 6 +++ ++ 15 14 fig.2 10 1 5.5MIN. +++ ++ 1 23 4 5 (Top View) 10 9 8 7 6 G RRG 4 Iv MU02-5201 MU02-9301 fig.1 Light Emitting Surface (Outer Size) 0.25 (12.7) Shape 0.5 (2.54) (10.16) GRRG 1 2 34 5 SUPER BRIGHT LED LIGHT BAR MODULE Ta=25C Characteristics by Shape Shape Emitted Color Part No. MU04-2101 Resin Color Red MU04-2105 MU04-3101 Orange MU04-3105 MU04-4101 Absolute Max. Rating Electro-Optical Characteristics Luminous Intensity Power Dissipation Pd MIN. TYP. Iv fig. IF Red 3 180 15 32 20 3 180 15 32 20 Orange 3 190 8 16 20 Milky White 3 190 8 16 20 3 225 15 32 20 3 225 15 32 20 Milky White 6 x19 (7x 20) MU04-5101 Pure Green Green 3 190 8 16 20 MU04-5102 Green Green 3 225 10 20 20 MU04-5105 Pure Green Milky White 3 190 8 16 20 MU07-2101 Red Red 5 300 20 40 20 MU07-3101 Orange Orange 5 320 10 20 20 MU07-4101 Yellow Yellow 5 375 20 40 20 MU07-5101 Pure Green Green 5 320 10 20 20 MU08-2201 Red Red 4 240 20 40 20 MU08-3201 Orange Orange 4 250 10 20 20 MU08-4201 Yellow Yellow 4 300 20 40 20 MU08-5201 Pure Green Green 4 250 10 20 20 4 240 8 12 20 4 250 8 12 20 pcs mW Pure Green 14x16 (15x 17) Green mm Units Package Dimensions 6.5 4MIN. 0.5 20 19 0.25 7 6 R G 9201Type only 1 1 2 3 2 6 7 Tolerance : 0.25mm (Top View) + + + 5 mA unit : mm 7 6 0.25 mcd fig.4 (2.2) 6.5 4MIN. 0.5 10 9 6 x29 (7x 30) 4 (2.2) Red MU08-9301 fig.3 No. of Chips Milky White Yellow Yellow MU04-4105 Light Emitting Surface (Outer Size) + + + + + + 3 1 2 3 4 5 6 View) (Top View) 2250Type only 0.5 1 (2.54) 2 1 3 2 1.5 3 (2.54) 1 0.5 (5.08) 2 3 4 5 6 (12.7) fig.6 7 4MIN. 3.5 1 1 17 16 8 7 6 5 0.25 fig.5 2 (12.7) 15 14 + + + + + + + + 1 2 3 4 (Top View) 8 7 6 5 0.5 (2.54) (7.62) 15 fig.7 1 2 3 4 7 5.5MIN. 3.5 1 1 0. 25 17 16 10 9 8 7 6 (12.7) 2 15 14 + + + + + + + + + + 12 34 5 (Top View) 10 9 8 7 6 G R R G 0.5 (2.54) (10.16) 15 G R R G 1 2 3 4 5 5 SUPER BRIGHT LED LIGHT BAR MODULE Ta=25C Characteristics by Shape Emitted Color Part No. MU09-9101 Resin Color Red Pure Green Red MU09-9102 Milky White Milky White Yellow Red MU09-9103 Light Emitting Surface (Outer Size) 6 .4 ( 7) Milky White Orange Absolute Max. Rating Electro-Optical Characteristics Luminous Intensity TYP. 1 60 4 8 20 2 125 4 6 20 1 60 4 8 20 2 150 6 12 20 1 60 4 8 20 2 125 4 8 20 IF Red 2 120 10 20 20 MU11-3201 Orange Orange 2 125 5 10 20 MU11-4201 Yellow Yellow 2 150 10 20 20 MU11-5201 Pure Green Green 2 125 5 10 20 1 60 6 12 20 5 310 7 14 20 1 60 6 12 20 Red Pure Green Red Red MU16-2105 MU16-3101 Orange MU16-3105 MU16-4101 MU16-5101 MU16-5105 MU17-2101 Red MU17-2105 MU17-3101 Orange MU17-3105 MU17-4101 MU17-4105 MU17-5101 MU17-5105 375 20 40 20 2 120 8 16 20 Milky White 2 120 8 16 20 Orange 2 125 6 12 20 2 125 6 12 20 2 150 8 16 20 Milky White 2 150 8 16 20 Green 2 125 4 8 20 Milky White 2 125 4 8 20 Red 3 180 12 24 20 Milky White 3 180 12 24 20 Orange 3 190 9 18 20 3 190 9 18 20 3 225 12 24 20 Milky White 3 225 12 24 20 Green 3 190 5 10 20 Milky White 3 190 5 10 pcs mW Milky White Yellow Yellow Pure Green Units Package Dimensions 9 x9 (10.1x 10.1) 5 Yellow Pure Green 4.6 x9.5 (5.6 x 10.5) Red Milky White Yellow MU16-4105 Milky White Milky White Yellow MU16-2101 4x12 (5x 13) 4x19 (5x 20) mm mcd 8 9 10 11 12 20 mA Tolerance : 0.25mm unit : mm fig.9 5.6 4MIN. 0.5 5.6 4.6 10.5 9.5 + + + 0.25 1 2 3 (Top View) 0.5 (2.54) (5.08) 6 fig. MIN. Red MU13-9102 fig.10 Iv Power Dissipation Pd MU11-2201 MU13-9101 fig.8 No. of Chips (2.2) Shape fig.11 1 2 3 SUPER BRIGHT LED LIGHT BAR MODULE Ta=25C Characteristics by Shape Shape Emitted Color Part No. MU20-2101 Resin Color Red MU20-2105 MU20-3101 Orange MU20-3105 MU20-4105 MU20-5101 Pure Green MU20-5105 Absolute Max. Rating Power Dissipation Pd MIN. TYP. IF Luminous Intensity Iv fig. Red 1 60 4 8 20 1 60 4 8 20 Orange 1 62.50 3 6 20 1 62.50 3 6 20 1 75 4 8 20 Yellow Yellow Electro-Optical Characteristics No. of Chips Milky White Milky White MU20-4101 Light Emitting Surface (Outer Size) 5 x9 (6x 10) Milky White 1 75 4 8 20 Green 1 62.50 2 4 20 Milky White 1 62.50 2 4 20 Red 1 60 3 6 20 1 75 3 6 20 1 75 3 6 20 MU91-2001 Red MU91-3001 Orange Orange MU91-4001 Yellow Yellow MU91-5001 Pure Green Green 1 75 1.2 2.4 20 MU92-2001 Red Red 1 60 3 6 20 MU92-3001 Orange Orange 1 75 3 6 20 MU92-4001 Yellow Yellow 1 75 3 6 20 MU92-5001 Pure Green Green 1 75 1.2 2.4 20 MU93-2001 Red Red 1 60 4 8 20 MU93-3001 Orange Orange 75 4 8 20 MU93-4001 Yellow Yellow 10 x10 (10 x 10) 1 1 75 4 8 20 MU93-5001 Pure Green Green 1 75 1.5 mm pcs mW Units Package Dimensions 6 x6 (6x 6) 9x5 (9x 5) 3 mcd 14 15 16 20 mA Tolerance : 0.25mm unit : mm fig.13 10 9 1 2 fig.14 3.8 1 0.6MAX. 0.4 0.4 27MIN. 25MIN. 8 0.5 6 5 (2) fig.12 13 (2.5) fig.15 10 4.6 0.6MAX. 0.4 16.5MIN. 14.5MIN. 1 15 10 fig.16 (2.5) 7 SUPER BRIGHT LED NUMERIC DISPLAY (SEVEN SEGMENT DISPLAY) Stanley's Numeric Displays which incorporate super-bright LEDs produce vivid, brilliant displays. Available colors are red, pure green, green, yellow and orange. Display types include segment type (character heights 7.5mm to 25mm) and the alpha-numeric type (character heights 25mm and 51mm). These are suitable for dynamic drive due to the low-current drive characteristics. Description of Part Number Ta=25C Characteristics by Color Size Part No. Reverse Current IR Wavelength p Derating Topr Tstg TYP. MAX. IF MAX. VR TYP IF IF 60 4 -30~+85 -30~+85 2.0 2.5 10 100 4 700 10 0.25 N R13 S,ME GaAIAs(Red) 1 40 20 80 4 -30~+85 -30~+85 1.7 2.0 10 100 4 660 10 0.33 N G 1 3 P, S P, M P GaP(Green) 1 48 20 80 4 -30~+85 -30~+85 2.0 2.4 10 100 4 565 10 0.33 GaAsP(Orange) 1 48 20 80 4 -30~+85 -30~+85 2.0 2.4 10 100 4 605 10 0.33 N R14 ,N R24 GaAIAs(Red) 1 60 30 120 4 -40~+85 -40~+85 1.7 2.0 20 100 4 660 20 0.41 N R14 S GaAIAs(Red) 1 40 20 80 4 -30~+85 -30~+85 1.7 2.0 10 100 4 660 10 0.33 N G 1 4 P, N G 2 4 P GaP(Green) 1 63 25 100 4 -40~+85 -40~+85 2.2 2.5 20 100 4 565 20 0.34 N G14 SP GaP(Green) 1 48 20 80 4 -40~+85 -30~+85 2.0 2.4 10 100 4 565 10 0.33 N A14 ,N A24 GaAsP(Orange) 1 63 25 100 4 -40~+85 -40~+85 2.2 2.5 20 100 4 605 20 0.34 N A14 S GaAsP(Orange) 1 48 20 80 4 -30~+85 -30~+85 2.0 2.4 10 100 4 605 10 0.33 1.7 2.0 10 660 10 2.0 2.4 10 570 10 GaAIAs(Red) GaP(Green) 1 36 15 70 4 -30~+70 -30~+80 20 4 0.22 N R16 ,N R26 GaAIAs(Red) 1 60 30 120 4 -40~+85 -40~+85 1.7 2.0 20 100 4 660 20 0.41 N G 1 6 P, N G 2 6 P GaP(Green) 1 63 25 100 4 -40~+85 -40~+85 2.2 2.5 20 100 4 565 20 0.34 GaAsP(Orange) 1 63 25 100 4 -40~+85 -40~+85 2.2 2.5 20 100 4 605 20 0.34 10 660 10 15 70 -30~+80 2.0 36 -30~+70 1.7 1 2.0 2.4 10 20 4 570 10 2 120 30 120 4 -20~+85 -20~+85 3.4 4.0 20 100 8 660 20 0.41 N A16 ,N A26 4 GaAIAs(Red) GaP(Green) 4 0.22 N R10 GaAIAs(Red) N G10 P GaP(Green) 2 126 25 100 4 -20~+85 -20~+85 4.4 5.0 20 100 8 565 20 0.34 GaAsP(Orange) 2 126 25 100 4 -20~+85 -20~+85 4.4 5.0 20 100 8 605 20 0.34 GaAIAs(Red) 2 80 3.4 4.0 10 660 10 GaP(Green) 2 96 20 1 40 4 4.0 4.8 10 570 10 mA mA V nm mA N A10 NARG10 mm Forward Voltage VF 15 NARG16 25 Storage Temp 37.5 NARG14 15 Electro-Optical Characteristics Operating Temp 1 N 13 ,S,M 10 Power Forward Peak Reverse Dissipation Current Forward Voltage Current Pd IF IFM TR GaP(Red) N R13 7.5 Chip/ Segment Absolute Maximum Rating Material Emitted Color Units mW 4 -30~+80 -30~+70 C V mA 100 4 A V 0.33 mA/C * Number of chips per segment * Ratings and specifications are for one segment * When both colors of a bi-color LED are driven simultaneously, the rating of NARG types are the total of the Pd, 1F and 1FM values. 1 : NARG 10 type in dynamic drive has a duty cycle of 1/2 and f=500Hz and the others have a duty cycle of 1/5 and f =1 kHz. 8 SUPER BRIGHT LED NUMERIC DISPLAY 7.5mm Type Ta=25C Luminous Intensity Iv Part No. Case Size (WXH) Emitted Color Shape Anode Common Arrow feather type 7.0 X 11.0 Arrow feather type 10.0 X 15.0 Arrow feather type 10.0 X 19.0 Cathode Common NAR131S/133S NKR131S/133S NAR131SP/133SP NKG131SP/133SP NAA131S/133S NKA131S/133S TYP. MIN. TYP. IF Red 1.4 2.8 2.8 5.6 10 Green 1 2 -- -- 10 Orange 0.6 1.2 -- -- 10 NAR131ME/133ME NKR131ME/133ME Red 1.2 2.4 -- -- 10 NAG131MP/133MP NKG131MP/133MP Green 0.6 1.2 -- -- 10 Orange 0.8 1.6 -- -- 10 Red 0.3 0.6 -- -- 10 Green 0.6 1.2 -- -- 10 Orange 0.8 1.6 -- -- NAA131M/133M NKA131M/133M NAR131/133 NKR131/133 NAG131P/133P NKG131P/133P NAA131/133 NKA131/133 mm Units Package Dimensions S Type 10 2.5 7 3 10 mA a f g e 11 8 1.0 2 Tolerance : 0.25mm 4 b c d DP 0.5 3.5 10 9 8 7 6 1 2 3 4 5 1 fig.2 5 (8) 4.0 mcd unit : mm 2 0.1 fig.1 fig. Rank C Rank B MIN. 1. 2. 3. 4. 5. Cathode a Cathode f Cathode g Cathode e Cathode d 6. 7. 8. 9. 10. Anode DP Cathode DP Cathode c Common Anode Cathode b The polarity of pin No.6 and No.7 is reversed except for the emitting red color. 0.25 Common cathode types have a reverse polarity. However, the polarity of pin No.6 or No.7 is not changed even if it is the common cathode type. (5.3) fig.3 * Common cathode types shown in fig. 2 and 3 have a reverse polarity. 9 SUPER BRIGHT LED NUMERIC DISPLAY 10mm Type Case Size (WXH) Ta=25C Luminous Intensity Iv Shape Square shape type 12.5 X 19.0 Part No. 12.5 X 19.0 fig.4 10 fig. Rank C TYP. MIN. TYP. IF 8 8 11 20 Green 1 2 -- -- 20 NSA141/143 Orange 3 6 -- -- 20 NSR145/147 Red 3.2 6.4 6.4 8.8 20 Green 0.8 1.6 -- -- 20 Orange 2.4 4.8 -- -- 20 NSA145/147 Units Package Dimensions Rank B 4 NSG145P/147P mm MIN. Red NSR141/143 NSG141P/143P Arrow feather type Emitted Color mcd 4 5 mA Tolerance : 0.25mm unit : mm fig.5 SUPER BRIGHT LED NUMERIC DISPLAY 10mm Type Ta=25C Luminous Intensity Iv Part No. Case Size (WXH) Emitted Color Shape Anode Common Arrow feather type 9.6 X 13.0 Square shape type 12.5 X 19.0 Arrow feather type 12.5 X 19.0 fig. Rank C Rank B MIN. TYP. MIN. TYP. IF Red 1.6 3.2 3.2 6.4 10 Green 0.6 1.2 -- -- 10 Orange 0.8 1.6 -- -- 10 Red 4 8 8 11 20 Green 1 2 -- -- 20 Cathode Common NAR141S/143S NKR141S/143S NAR141SP/143SP NKG141SP/143SP NAA141S/143S NKA141S/143S NAR141/143 NKR141/143 NAG141P/143P NKG141P/143P NAA141/143 NKA141/143 Orange 3 6 -- -- 20 NAR145/147 NKR145/147 Red 3.2 6.4 6.4 8.8 20 NAG145P/147P NKG145P/147P Green 0.8 1.6 -- -- 20 NAA145/147 NKA145/147 Orange 2.4 4.8 -- -- 20 mm Units Package Dimensions mcd 6 7 8 mA Tolerance : 0.25mm unit : mm fig.6 fig.7 * Common cathode types shown in fig. 6, 7, and 8 have a reverse polarity. fig.8 6.3 4 0~10 6.8 10 10 9 8 7 6 a f g 1 2 3 4 5 5 (15.24) 0.25 19 10.72 6.3 e b c d DP 1.5 1.7 12.5 2.54 1.6 0.6 (10.16) 1. 2. 3. 4. 5. Cathode Cathode Common Cathode Cathode e d Anode c DP 6. 7. 8. 9. 10. Cathode Cathode Common Cathode Cathode b a Anode f g Leave a minimum clearance of 1.7 mm from body resin to solder. 11 SUPER BRIGHT LED NUMERIC DISPLAY 10mm Type Case Size (WXH) Shape Anode Common Square shape type 25.2 X 19.0 Arrow feather type 25.2 X 19.0 Ta=25C Cathode Common Emitted Color Rank C Rank B fig. MIN. TYP. MIN. TYP. IF Red 4 8 8 11 20 Green 1 2 -- -- 20 NAR241/243 NKR241/243 NAG241P/243P NKG241P/243P NAA241/243 NKA241/243 Orange 3 6 -- -- 20 NAR245/247 NKR245/247 Red 3.2 6.4 6.4 8.8 20 NAG245P/247P NKG245P/247P Green 0.8 1.6 -- -- 20 NAA245/247 NKA245/247 Orange 2.4 4.8 -- -- 20 mm Units Package Dimensions fig.9 Luminous Intensity Iv Part No. mcd 9 10 mA Tolerance : 0.25mm unit : mm fig.10 * Common cathode types shown in fig. 9 and 10 have a reverse polarity. 12 SUPER BRIGHT LED NUMERIC DISPLAY 15mm Type Case Size (WXH) Ta=25C Part No. Emitted Color Shape Anode Common Arrow feather type 12.5 X 19.0 Arrow feather type 12.5 X 19.0 Arrow feather type 25.2 X 19.0 Luminous Intensity Iv Cathode Common MIN. TYP. IF NSR161/163 Red 6 12 12 15 20 NSG161P/163P Green 2 4 -- -- 20 NSA161/163 Orange 4 8 -- -- 20 Red 6 12 12 15 20 Green 2 4 -- -- 20 NKR161/163 NAG161P/163P NKG161P/163P NAA161/163 NKA161/163 Orange 4 8 -- -- 20 NAR261/263 NKR261/263 Red 6 12 12 15 20 NAG261P/263P NKG261P/263P Green 2 4 -- -- 20 NAA261/263 NKA261/263 Orange 4 8 -- -- 20 Units Package Dimensions fig.13 fig. TYP. NAR161/163 mm fig.11 Rank C Rank B MIN. mcd 11 12 13 mA Tolerance : 0.25mm unit : mm fig.12 * Common cathode types shown in fig. 12 and 13 have a reverse polarity. 13 SUPER BRIGHT LED NUMERIC DISPLAY 25mm Type Case Size (WXH) Ta=25C Part No. Anode Common Square shape type 22.8 X 33.0 Square shape type 22.8 X 33.0 Arrow feather type 22.8 X 33.0 Cathode Common MIN. TYP. IF Red 10 20 20 25 20 NSG101P/103P Green 4 8 -- -- 20 NSA101/103 Orange 8 16 -- -- 20 Red 10 20 20 25 20 Green 4 8 -- -- 20 NKR101/103 NAG101P/103P NKG101P/103P NAA101/103 NKA101/103 Orange 8 16 -- -- 20 NAR105/107 NKR105/107 Red 10 20 20 25 20 NAG105P/107P NKG105P/107P Green 4 8 -- -- 20 NAA105/107 NKA105/107 Orange 8 16 -- -- 20 Package Dimensions fig.16 TYP. NSR101/103 Units fig.14 fig. Rank C Rank B MIN. NAR101/103 mm 14 Luminous Intensity Iv Emitted Color Shape mcd 14 15 16 mA Tolerance : 0.25mm unit : mm fig.15 * Common cathode types shown in fig. 15 and 16 have a reverse polarity. SUPER BRIGHT LED NUMERIC DISPLAY Bi-color LED Numeric Displays 10/15/25mm TYPE Case Size (WXH) Ta=25C Part No. Luminous Intensity Iv Emitted Color Shape Anode Common fig. MIN. TYP. IF Red 1.2 2.4 10 Green 1.2 2.4 10 Red 1.2 2.4 10 Green 1.2 2.4 10 Red 2 4 10 Green 2 4 10 Cathode Common Arrow feather type 10.0 X 19.0 NARG141/143 NKRG141/143 17 Arrow feather type 12.5 X 19.0 NARG161/163 18 NKRG161/163 Arrow feather type 22.8 X 33.0 19 NARG105/107 mm Units Package Dimensions fig.17 mcd mA Tolerance : 0.25mm unit : mm fig.18 fig.19 15 ALPHA-NUMERIC LED DISPLAY Description of Part Number Characteristics by Color Size Part No. AAR Material (Emitted color) GaAIAs (Red) Ta=25C Absolute Maximum Ratings 1 Power Dissipation Pd Forward current IF Peak Forward current IFM 25 100 50 2 100 1 60 Reverse Voltage VR Electro-Optical Characteristics Operating Temp. Topr Storage Temp. Tstg -20~+85 -20~+100 Reverse Current IR Forward Voltage VF TYP. MAX. 1.7 2.0 4 8 3.4 4.0 2.2 2.5 IF MAX. 20 100 VR Wavelength p Derating TYP. VR 660 20 0.33 605 20 0.33 40 0.66 20 0.33 40 0.66 20 0.33 mA mA/C IF 4 8 25 AAA AAR GaAsP (Orange) GaAIAs (Red) 4 25 2 120 4 200 100 -20~+85 -20~+100 8 40 4 20 4.4 5.0 1.7 2.0 8 200 40 8 2 100 20 100 4 200 40 200 100 -30~+70 -30~+80 20 8 20 10 40 20 660 50 AAA mm GaAsP (Orange) Units 8 2 100 20 100 mW mA mA -30~+70 V -30~+80 2.1 2.5 V C 8 20 10 mA A V 605 nm Characteristics by Shape (25/50 mm TYPE) Case Size (WXH) Part No. Shape Ta=25C Anode Common Emitted Color AAR101 Red 22.8 X 33 Luminous Intensity Iv Rank B Rank C MIN. TYP. MIN. TYP. 1 6 12 12 15 2 12 24 24 30 1 2 4 -- -- 2 4 8 -- -- 4 6 -- -- IF fig. 20 20 AAA101 AAR121 Orange Red 20 40 40 X 74 21 AAA121 mm Orange Units 2 3 -- mcd -- 40 mA 20 mA/segment is for segments A,B,E,F,U and P. Package Dimensions fig.20 16 Tolerance : 0.25mm unit : mm fig.21