SPEC NO: DSAD0945 REV NO: V.8 DATE: OCT/15/2010 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1203001884
2.0x1.25mm SMD CHIP LED LAMP
Part Number: APT2012SURCK Hyper Red
Features
z2.0mm x1.25mm SMT LED,0.75mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD0945 REV NO: V.8 DATE: OCT/15/2010 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1203001884
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APT2012SURCK Hyper Red (AlGaInP) Water Clear 120 230 120°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 650 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA
C Capacitance Hyper Red 35 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
IR Reverse Current Hyper Red 10 uA VR=5V
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAD0945 REV NO: V.8 DATE: OCT/15/2010 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1203001884
Hyper Red APT2012SURCK
SPEC NO: DSAD0945 REV NO: V.8 DATE: OCT/15/2010 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1203001884
APT2012SURCK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAD0945 REV NO: V.8 DATE: OCT/15/2010 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lv ERP: 1203001884
PACKING & LABEL SPECIFICATIONS APT2012SURCK
