Relay and Socket Usage Chart
Terminal Hold-Down Socket
Relay Socket Type Spring Notes Page Comments
KUP 27E415 QC & Solder 20C228 or 20C254 — 101 20C228 held in place by socket hold down screw whereas 20C254
[4 pole snaps onto socket.
with .110" 27E419 PC 20C228 or 20C254 — 101 20C228 held in place by socket hold down screw whereas 20C254
(2.79mm) QC] snaps onto socket.
27E867 Screw 20C254 4 101
OAC & ODC — — — — — Refer to page 176 for I/O module mounting board details.
OACM & ODCM — — — — — Refer to page 184 for Slim Line I/O modules mounting board details.
R10, R10L & 27E125 Solder 20C249 2, 3 86 Tin plated terminals with grounding strip.
R10S (2 pole) 27E162 Solder 20C249 2, 3 86 Tin plated terminals no grounding provision.
27E128 PC Stag. 20C249 or 20C259 2, 3 86 Tin plated terminals with grounding strip.
27E446 Solder 20C249 1, 2, 3 86 Tin plated terminals with grounding strip.
27E709 PC Stag. 20C249 or 20C259 2, 3 86 Gold flashed terminals with grounding strip.
27E193 PC Stag. 20C249 or 20C259 2, 3 86 Tin plated terminals with grounding terminals.
27E212 PC Stag. 20C249 or 20C259 2, 3 86 Tin plated terminals no grounding provision.
27E342 PC In-Line 20C249 or 20C259 2, 3 86 Tin plated terminals no grounding provision.
27E317 Solder/Bkt. Mt. 20C249 2, 3 87 Tin plated terminals with grounding strip.
27E460 Screw 20C249 or 20C259 2, 3, 4 87 Tin plated terminals no grounding provision.
R10, R10L & 27E126 Solder 20C250 2, 3 86 Tin plated terminals with grounding strip.
R10S (4 pole) 27E163 Solder 20C250 2, 3 86 Tin plated terminals no grounding provision.
27E129 PC Stag. 20C250 2, 3 86 Tin plated terminals with grounding strip.
27E194 PC Stag. 20C250 or 20C259 2, 3 86 Tin plated terminals with grounding terminal.
27E213 PC Stag. 20C250 or 20C259 2, 3 86 Tin plated terminals no grounding provision.
27E714 PC Stag. 20C250 or 20C259 2, 3 86 Gold flashed terminals no grounding provision.
27E629 PC In-Line 20C250 or 20C259 2, 3 86 Tin plated terminals no grounding provision.
27E461 Screw 20C250 or 20C259 2, 3, 4 87 Tin plated terminals no grounding provision.
R10 & R10L 27E127 Solder 20C251 3 86 Tin plated terminals with grounding strip.
(6 pole) 27E130 PC Stag. 20C251 or 20C259 3 86 Tin plated terminals with grounding strip.
27E195 PC Stag. 20C251 or 20C259 3 86 Tin plated terminals with grounding terminal.
27E630 PC In-Line 20C251 or 20C259 3 86 Tin plated terminals no ground provision.
27E462 Screw 20C251 or 20C259 3, 4 87 Tin plated terminals no grounding provision.
R10-T1 27E122 Screw — — 109
(8-pin octal) 27E891 Screw 20C318 5 109 Use 20C317 anchor clip for hold down spring (2 supplied per socket).
R10-T2 27E123 Screw — — 109
(11-pin octal) 27E892 Screw 20C318 5 109 Use 20C317 anchor clip for hold down spring (2 supplied per socket).
RKA/RKS 27E936 PC 20C330 — 72 Use with Code 1.
27E937 PC 20C330 — 72 Use with Codes 2, 3 & 5.
27E1038 Screw 20C330 5 72 Use with Code 1.
27E1039 Screw 20C330 5 72 Use with Codes 2, 3 & 5.
S89R11APP & 27E122 Screw — — 109
S89R11DPP 27E891 Screw 5 109
(8-pin octal)
SDAS-01 27E043 Solder — — 101
27E046 PC — — 101
27E067 QC & Solder — — 101
27E088 Blank — — 101
27E121 Screw 20C314 — 101 Use 2 pieces 20C314 per socket.
27E396 QC & Solder — — 101
27E400 Solder — — 101
27E893 Screw — 5 101
Note 1: Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above.
Note 2: Listed hold-down springs cannot be used for R10S.
Note 3: On R10L series hold down spring fits to the side of light emitting diode.
Note 4: Use 40G432 insulator or suitable insulator (2 per socket).
Note 5: Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware.
Note 6: 27E893 cannot be used with KUIP and KUGP series relays.
Specifications and availability subject to change without notice.
13CXXXX Printed in U.S.A. IH/3-00
Tyco Electronics Corporation - P&B, Winston-Salem, NC 27102
Technical Support Center: 1-800-522-6752, www.pandbrelays.com