!Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. CONTENTS Part Numbering 2 Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2- 5 2 Type KH (Basic Insulation) -IEC60384-14 Class X1, Y2- 7 3 Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1- 9 4 Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1- 11 Type KY/KH/KX Specifications and Test Methods 13 DEJ Series -Based on the Electrical Appliance and Material Safety Law of Japan- 17 DEJ Series Specifications and Test Methods 18 Safety Certified Ceramic Capacitors Characteristics Data (Typical Example) 21 Safety Certified Ceramic Capacitors Packaging 24 Safety Certified Ceramic Capacitors !Caution 26 Safety Certified Ceramic Capacitors Notice 29 6 7 8 9 10 11 DES Series (125C Guaranteed/Low-dissipation Factor/DC500V-1kV) 30 DES Series Specifications and Test Methods 32 DEH Series (125C Guaranteed/Low-dissipation Factor/DC500V-3.15kV) 34 DEH Series Specifications and Test Methods 37 DEA Series (125C Guaranteed/Class 1/DC1k-3.15kV) 39 DEA Series Specifications and Test Methods 42 DEB Series (Class 2/DC1k-3.15kV) 44 DEB Series Specifications and Test Methods 47 DEC Series (Class 1, 2/DC6.3kV) 49 DEC Series Specifications and Test Methods 51 DEF Series (Only for LCD Backlight Inverter Circuit/6.3kVp-p) 53 DEF Series Specifications and Test Methods 55 High Voltage Ceramic Capacitors Characteristics Data (Typical Example) 57 High Voltage Ceramic Capacitors Packaging 58 High Voltage Ceramic Capacitors !Caution 60 High Voltage Ceramic Capacitors Notice 67 12 Jul.13,2011 1 1 5 C85E.pdf Type KJ -IEC60384-14 Class X1, Y2- 68 Type KJ Specifications and Test Methods 69 Safety Certified Ceramic Capacitors for Automotive Characteristics Data (Typical Example) 74 Safety Certified Ceramic Capacitors for Automotive Packaging 75 Safety Certified Ceramic Capacitors for Automotive !Caution 76 Safety Certified Ceramic Capacitors for Automotive Notice 79 Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications 80 2 3 4 5 6 7 8 9 10 11 12 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. o Part Numbering Safety Standard Certified Ceramic Capacitors (Part Number) DE 2 E3 KH 102 M N3 A q w e r u i o t y yCapacitance Tolerance qProduct ID Code Product ID Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors DE wSeries Category Code Outline Contents 1 Safety Standard Certified IEC60384-14 Class X1, Y1 2 J AC250V (r.m.s.) T5% K T10% M T20% Z W80%, Y20% uLead Style IEC60384-14 Class X1, Y2 -Products based on the Electrical Appliance and Material Safety Law of Japan- For Electrical Appliance and Material Safety Law of Japan, the first three digits (qProduct ID and wSeries Category) express "Series Name." For Safety Certified Capacitors, the first three digits express product code. The fourth figure expresses certified type shown in rSafety Standard Certified Type column. Lead Style Code A2 eTemperature Characteristics A4 Code B3 B T10% E3 E W20%,Y55% F3 F W30%,Y80% 1X SL Temperature Range W350 to Y1000ppm/D W20 to W85D Code 2 Lead Diameter o0.6T0.05 10 10 5 Pitch of Components Y o0.6W0.1,Y0.05 Vertical Crimp Short 7.5 10 o0.6W0.1, Y0.05 C3 Straight Long 7.5 o0.6T0.05 Y D3 Straight Short 7.5 o0.6T0.05 Y Vertical Crimp Taping 7.5 B3 o0.6T0.05 10 5 N3 N4 N5 N7 rRated Voltage/Safety Standard Certified Type 7.5 B2 N2 Y25 to W85D Lead Spacing A5 B5 Cap. Change or Temp. Coeff. Dimensions (mm) 5 Vertical Crimp Long A3 B4 Temperature Characteristics Capacitance Tolerance J Straight Taping P3 Y 12.7 o0.6T0.05 10 15 25.4 10 o0.6W0.1, Y0.05 25.4 7.5 o0.6T0.05 30 7.5 o0.6T0.05 15 Rated Voltage iPackaging E2 AC250V KH X1, Y2; AC250V, (Safety Standard Certified Type KH) Code Packaging KY X1, Y2; AC250V, (Safety Standard Certified Type KY) A Ammo Pack Taping KX X1, Y1; AC250V, (Safety Standard Certified Type KX) B Bulk tCapacitance oIndividual Specification Code Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. For part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics. C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors (500V-6.3kV) (Part Number) DE B B3 3A 102 K N2 A q w e r t y u i o yCapacitance Tolerance qProduct ID Product ID Code Capacitance Tolerance C T0.25pF D T0.5pF High Voltage Ceramic Capacitors (500V-6.3kV) / Safety Standard Certified Ceramic Capacitors DE wSeries Category Code Outline Contents A Class 1 (Char. SL) DC1-3.15kV Rated B Class 2 DC1-3.15kV Rated C Class 1, 2 DC6.3kV Rated High Temperature Guaranteed, Low-dissipation Factor (Char. R, C) S High Temperature Guaranteed, Low-dissipation Factor (Char. D) A2 F LCD Backlight Inverter Circuit A4 High Voltage The first three digits (qProduct ID and wSeries Category) express "Series Name." T5% K T10% Z W80%, Y20% uLead Style Code H J Lead Style A3 B2/J2 B3/J3 B4 eTemperature Characteristics Cap. Change or Temp. Coeff. B3 B T10% E3 E W20%,Y55% F3 F W30%,Y80% Code C3 C R3 R D3 D 1X SL 2C CH Temperature Range Vertical Crimp Short 7.5 C4 D1 Straight Short D3 T20% Y25 to W85D DD W15%,Y30% W85 to W125D N2 T15% Y25 to W85D N3 W15%,Y30% W85 to W125D N7 W20%,Y30% Y25 to W125D P2 W350 to Y1000ppm/D W20 to W85D P3 0T60ppm/D Straight Long W20 to W85D rRated Voltage Vertical Crimp Taping Straight Taping Pitch of Components o0.6T0.05 Y o0.6T0.05 Y 10 5 10 5 C3 Lead Diameter 5 7.5 CD Y25 to W85D Lead Spacing Vertical Crimp Long C1 Temperature Characteristics Dimensions (mm) 7.5 10 o0.5T0.05 o0.6T0.05 7.5 o0.5T0.05 5 o0.5T0.05 7.5 o0.6T0.05 7.5 o0.5T0.05 5 7.5 30 5 12.7 7.5 o0.6T0.05 Code Packaging A Ammo Pack Taping DC500V B Bulk 3A DC1kV 3D DC2kV 3F DC3.15kV DC6.3kV 15 iPackaging Rated Voltage 6.3kVp-p 15 7.5 2H 3J Y 12.7 o0.6T0.05 Code LH Y oIndividual Specification Code For part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics. tCapacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. 3 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Standard Certified Ceramic Capacitors for Automotive (Part Number) DE 6 E3 KJ q w e r 102 M t y N3 A u i o yCapacitance Tolerance qProduct ID Product ID Code Capacitance Tolerance K T10% M T20% Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors DE uLead Style wSeries Category Code Outline Contents 6 Safety Standard Certified IEC60384-14 Class X1, Y2 The first three digits express product code. The fourth figure expresses certified type shown in rSafety Standard Certified Type column. Code Lead Style A3 Vertical Crimp Long B3 Vertical Crimp Short N3 Vertical Crimp Taping eTemperature Characteristics Code Temperature Characteristics Cap. Change or Temp. Coeff. B3 B T10% E3 E W20%,Y55% Temperature Range Y25 to W85D rRated Voltage/Safety Standard Certified Type Code Rated Voltage KJ X1, Y2; AC300V, (Safety Standard Certified Type KJ) tCapacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. 4 Dimensions (mm) Lead Spacing Lead Diameter Pitch of Components Y 7.5 o0.6T0.05 Y 15 iPackaging Code Packaging A Ammo Pack Taping B Bulk oIndividual Specification Code For part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics. C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Standard Certified Ceramic Capacitors 1 Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2D max. T max. 25.0 min. e F1.0 od (in mm) [Bulk] Vertical Crimp Long (A2, A3) Lead Code Coating Extension e od A2, A3 Up to the end of crimp 0.60.05 T max. 3.0 max. D max. e 5.01.0 1. Compact size; diameter 25% less than Type KH. 2. Operating temperature range guaranteed up to 125 degrees (UL: 85 deg.). 3. Dielectric strength: AC2000V (for lead spacing F=5mm) AC2600V (for lead spacing F=7.5mm) 4. Class X1/Y2 capacitors certified by UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/ NSW. 5. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 6. Taping available for automatic insertion. 3.0 max. Features Applications od F0.8 1. Ideal for use as X/Y capacitors for AC line filters and primary-secondary coupling on switching power supplies and AC adapters. 2. Ideal for use on D-A isolation and noise absorption for DAA modems without transformers. (in mm) [Bulk] Vertical Crimp Short (B2, B3) Lead Code Coating Extension e od B2, B3 Up to the end of crimp 0.60.05 Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. Standard Certification UL CSA VDE BSI Marking Standard No. Certified No. UL1414 CSA E60384-14 IEC 60384-14 EN 60384-14 EN 60065 (8.8, 14.2) IEC 60384-14 EN 60384-14 E37921 1283280 Example Rated Voltage 40006273 w q KM 37901 SEMKO DEMKO FIMKO NEMKO ESTI IEC 60384-14 EN 60384-14 812168 314115 24197 P08209361 08.0710 NSW IEC 60384-14 AS3250 6824 Item q Type Designation KY AC250V(r.m.s.) t 472M KY250~ X1 Y2 16 8 w Nominal Capacitance (Under 100pF: Actual value, 100pF and over: Marked with 3 figures) e e Capacitance Tolerance r r Company Name Code 8 : Made in Taiwan 15 : Made in Thailand t Manufactured Date Code Class Code X1Y2 Rated Voltage Mark 250~ * The certification number might change due to revision of the application standard and changes in the range of acquisition. * Please contact us when the certification of Chinese Safety Standard or South Korean Safety Standard is necessary. 5 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. 1 C85E.pdf Jul.13,2011 Lead Spacing F=7.5mm Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) DE21XKY100JpppM02 250 SL 10 5% 8 max. 7.5 5.0 max. A3B B3B N3A DE21XKY150JpppM02 250 SL 15 5% 8 max. 7.5 5.0 max. A3B B3B N3A DE21XKY220JpppM02 250 SL 22 5% 8 max. 7.5 5.0 max. A3B B3B N3A DE21XKY330JpppM02 250 SL 33 5% 8 max. 7.5 5.0 max. A3B B3B N3A DE21XKY470JpppM02 250 SL 47 5% 8 max. 7.5 5.0 max. A3B B3B N3A DE21XKY680JpppM02 250 SL 68 5% 8 max. 7.5 5.0 max. A3B B3B N3A DE2B3KY101KpppM02 250 B 100 10% 7 max. 7.5 5.0 max. A3B B3B N3A DE2B3KY151KpppM02 250 B 150 10% 7 max. 7.5 5.0 max. A3B B3B N3A DE2B3KY221KpppM02 250 B 220 10% 7 max. 7.5 5.0 max. A3B B3B N3A DE2B3KY331KpppM02 250 B 330 10% 7 max. 7.5 5.0 max. A3B B3B N3A DE2B3KY471KpppM02 250 B 470 10% 7 max. 7.5 5.0 max. A3B B3B N3A DE2B3KY681KpppM02 250 B 680 10% 8 max. 7.5 5.0 max. A3B B3B N3A DE2E3KY102MpppM02 250 E 1000 20% 7 max. 7.5 5.0 max. A3B B3B N3A DE2E3KY152MpppM02 250 E 1500 20% 7 max. 7.5 5.0 max. A3B B3B N3A DE2E3KY222MpppM02 250 E 2200 20% 8 max. 7.5 5.0 max. A3B B3B N3A DE2E3KY332MpppM02 250 E 3300 20% 9 max. 7.5 5.0 max. A3B B3B N3A DE2E3KY472MpppM02 250 E 4700 20% 10 max. 7.5 5.0 max. A3B B3B N3A DE2F3KY103MpppM02 250 F 10000 20% 14 max. 7.5 5.0 max. A3B B3B N3A Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code. Individual specification code "M02" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V." Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. Lead Spacing F=5mm Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) DE21XKY100JpppM01 250 SL 10 5% 8 max. 5.0 5.0 max. A2B B2B N2A DE21XKY150JpppM01 250 SL 15 5% 8 max. 5.0 5.0 max. A2B B2B N2A DE21XKY220JpppM01 250 SL 22 5% 8 max. 5.0 5.0 max. A2B B2B N2A DE21XKY330JpppM01 250 SL 33 5% 8 max. 5.0 5.0 max. A2B B2B N2A DE21XKY470JpppM01 250 SL 47 5% 8 max. 5.0 5.0 max. A2B B2B N2A DE21XKY680JpppM01 250 SL 68 5% 8 max. 5.0 5.0 max. A2B B2B N2A DE2B3KY101KpppM01 250 B 100 10% 7 max. 5.0 5.0 max. A2B B2B N2A DE2B3KY151KpppM01 250 B 150 10% 7 max. 5.0 5.0 max. A2B B2B N2A DE2B3KY221KpppM01 250 B 220 10% 7 max. 5.0 5.0 max. A2B B2B N2A DE2B3KY331KpppM01 250 B 330 10% 7 max. 5.0 5.0 max. A2B B2B N2A DE2B3KY471KpppM01 250 B 470 10% 7 max. 5.0 5.0 max. A2B B2B N2A DE2B3KY681KpppM01 250 B 680 10% 8 max. 5.0 5.0 max. A2B B2B N2A DE2E3KY102MpppM01 250 E 1000 20% 7 max. 5.0 5.0 max. A2B B2B N2A DE2E3KY152MpppM01 250 E 1500 20% 7 max. 5.0 5.0 max. A2B B2B N2A DE2E3KY222MpppM01 250 E 2200 20% 8 max. 5.0 5.0 max. A2B B2B N2A DE2E3KY332MpppM01 250 E 3300 20% 9 max. 5.0 5.0 max. A2B B2B N2A DE2E3KY472MpppM01 250 E 4700 20% 10 max. 5.0 5.0 max. A2B B2B N2A Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code. Individual specification code "M01" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2000V." Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. 6 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Standard Certified Ceramic Capacitors Type KH (Basic Insulation) -IEC60384-14 Class X1, Y22 D max. T max. e 25.0 min. 1. Operating temperature range guaranteed up to 125 degrees (UL: 85 deg.). 2. Dielectric strength: AC2600V 3. Class X1/Y2 capacitors certified by UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/ NSW. 4. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 5. Taping available for automatic insertion. 3.0 max. Features F1.0 od (in mm) [Bulk] Vertical Crimp Long (A3) Lead Code Coating Extension e od A3 Up to the end of crimp 0.60.05 D max. T max. Ideal for use as X/Y capacitors for AC line filters and primary-secondary coupling on switching power supplies and AC adapters. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. Standard Certification UL CSA VDE BSI Standard No. UL1414 CSA E60384-14 IEC 60384-14 EN 60384-14 EN 60065 (8.8, 14.2) IEC 60384-14 EN 60384-14 SEMKO DEMKO FIMKO NEMKO ESTI IEC 60384-14 EN 60384-14 NSW IEC 60384-14 AS3250 3.0 max. Applications 5.01.0 e od F0.8 (in mm) [Bulk] Vertical Crimp Short (B3) Lead Code Coating Extension e od B3 Up to the end of crimp 0.60.05 Marking Certified No. Item Example Rated Voltage q Type Designation E37921 1343805 40002796 e Capacitance Tolerance r Company Name Code 8 : Made in Taiwan 15 : Made in Thailand w KM 37901 812163 314578 24195 P08209182 08.0708 KH w Nominal Capacitance (Marked with 3 figures) AC250V(r.m.s.) 6529 * The certification number might change due to revision of the application standard and changes in the range of acquisition. * Please contact us when the certification of Chinese Safety Standard or South Korean Safety Standard is necessary. q KH472M X1Y2 BSI FI MJ502 250~ 8 N 16 D t Manufactured Date Code UL Approval Mark CSA Approval Mark r VDE Approval Mark t BSI Approval Mark SEMKO Approval Mark DEMKO Approval Mark FIMKO Approval Mark NEMKO Approval Mark ESTI Approval Mark Class Code Rated Voltage Mark e BSI D FI N MJ502 X1Y2 250~ 7 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) DE2B3KH101Kppp 250 B 100 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE2B3KH151Kppp 250 B 150 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE2B3KH221Kppp 250 B 220 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE2B3KH331Kppp 250 B 330 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE2B3KH471Kppp 250 B 470 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE2B3KH681Kppp 250 B 680 10% 9 max. 7.5 7.0 max. A3B B3B N3A DE2E3KH102Mppp 250 E 1000 20% 8 max. 7.5 7.0 max. A3B B3B N3A DE2E3KH152Mppp 250 E 1500 20% 9 max. 7.5 7.0 max. A3B B3B N3A DE2E3KH222Mppp 250 E 2200 20% 10 max. 7.5 7.0 max. A3B B3B N3A DE2E3KH332Mppp 250 E 3300 20% 12 max. 7.5 7.0 max. A3B B3B N3A DE2E3KH472Mppp 250 E 4700 20% 13 max. 7.5 7.0 max. A3B B3B N3A DE2F3KH103Mppp 250 F 10000 20% 16 max. 7.5 7.0 max. A3B B3B N7A Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code. Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KH) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. 8 Jul.13,2011 AC Rated Voltage (Vac) Part Number 2 C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Standard Certified Ceramic Capacitors Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1D max. T max. Features 3.0 max. 3 25.0 min. e F1.0 od (in mm) Lead Code Coating Extension e od A4 Up to the end of crimp 0.60.05 D max. T max. 3.0 max. [Bulk] Vertical Crimp Long (A4) e 5.01.0 1. We design capacitors much more compact in size than current Type KX, having reduced the diameter by 20% max. 2. Operating temperature range guaranteed up to 125 degrees (UL: 85 deg.). 3. Dielectric strength: AC4000V 4. Class X1/Y1 capacitors certified by UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/ IMQ. 5. Can be use with a component in appliances requiring reinforced insulation and double insulation based on UL1492, IEC60065 and IEC60950. 6. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 7. Taping available for automatic insertion. od F0.8 (in mm) Applications 1. Ideal for use as X/Y capacitors for AC line filters and primary-secondary coupling on switching power supplies and AC adapters. 2. Ideal for use on D-A isolation and noise absorption for DAA modems without transformers. [Bulk] Vertical Crimp Short (B4) Lead Code Coating Extension e od B4 Up to the end of crimp 0.60.05 Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. *: Small sized Type KX differs from current Type KX in electrical characteristics, such as the voltage dependency, capacitance temperature dependency, and Dielectric strength. Therefore, before replacing current Type KX, please make a performance check by equipment. Please also refer to Notice (Rating) item 2, "Performance Check by Equipment," below. 9 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Standard Certification UL CSA VDE BSI 3 SEMKO DEMKO FIMKO NEMKO ESTI IMQ Certified No. UL1414 CSA E60384-14 IEC 60384-14 EN 60384-14 EN 60065 (8.8, 14.2) IEC 60384-14 EN 60384-14 E37921 1343810 Example Rated Voltage Item q Type Designation KX 40002831 w q KM 37901 AC250V(r.m.s.) t 812158 314577 24191 P08209173 08.0707 V4069 EN 60384-14 Jul.13,2011 Marking Standard No. IEC 60384-14 EN 60384-14 C85E.pdf 472M KX250~ X1 Y1 16 8 e w Nominal Capacitance (Marked with 3 figures) e Capacitance Tolerance r Company Name Code 8 : Made in Taiwan 15 : Made in Thailand r t Manufactured Date Code Class Code X1Y1 Rated Voltage Mark 250~ * The certification number might change due to revision of the application standard and changes in the range of acquisition. * Please contact us when the certification of Chinese Safety Standard or South Korean Safety Standard is necessary. Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) DE1B3KX101KpppL01 250 B 100 10% 8 max. 10.0 7.0 max. A4B B4B N4A DE1B3KX151KpppL01 250 B 150 10% 8 max. 10.0 7.0 max. A4B B4B N4A DE1B3KX221KpppL01 250 B 220 10% 8 max. 10.0 7.0 max. A4B B4B N4A DE1B3KX331KpppL01 250 B 330 10% 8 max. 10.0 7.0 max. A4B B4B N4A DE1B3KX471KpppL01 250 B 470 10% 8 max. 10.0 7.0 max. A4B B4B N4A DE1B3KX681KpppL01 250 B 680 10% 9 max. 10.0 7.0 max. A4B B4B N4A DE1E3KX102MpppL01 250 E 1000 20% 7 max. 10.0 7.0 max. A4B B4B N4A DE1E3KX152MpppL01 250 E 1500 20% 8 max. 10.0 7.0 max. A4B B4B N4A DE1E3KX222MpppL01 250 E 2200 20% 9 max. 10.0 7.0 max. A4B B4B N4A DE1E3KX332MpppL01 250 E 3300 20% 10 max. 10.0 7.0 max. A4B B4B N4A DE1E3KX472MpppL01 250 E 4700 20% 12 max. 10.0 7.0 max. A4B B4B N4A Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code. Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. 10 C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 Safety Standard Certified Ceramic Capacitors Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1D max. T max. 25.0 min. e F1.0 4 od (in mm) Lead Code Coating Extension e od A5 Up to the end of crimp 0.60.1 0.05 D max. T max. 4.0 max. [Bulk] Vertical Crimp Long (A5) e 5.01.0 1. Operating temperature range guaranteed up to 125 degrees (UL: 85 deg.). 2. Dielectric strength: AC4000V 3. Class X1/Y1 capacitors certified by UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/ IMQ. 4. Can be use with a component in appliances requiring reinforced insulation and double insulation based on UL1492, IEC60065 and IEC60950. 5. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 6. Taping available for automatic insertion. 4.0 max. Features Applications od F0.8 Ideal for use as X/Y capacitors for AC line filters and primary-secondary coupling on switching power supplies and AC adapters. (in mm) [Bulk] Vertical Crimp Short (B5) Lead Code Coating Extension e od B5 Up to the end of crimp 0.60.1 0.05 Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. Standard Certification UL CSA VDE BSI SEMKO DEMKO FIMKO NEMKO ESTI IMQ Marking Standard No. Certified No. UL1414 CSA E60384-14 IEC 60384-14 EN 60384-14 EN 60065 (8.8, 14.2) IEC 60384-14 EN 60384-14 E37921 1343810 IEC 60384-14 EN 60384-14 EN 60384-14 Item q Type Designation Example Rated Voltage KX w Nominal Capacitance (Under 100pF: Actual value, 100pF and over: Marked with 3 figures) 40002831 e Capacitance Tolerance r Company Name Code 8 : Made in Taiwan 15 : Made in Thailand w KM 37901 AC250V(r.m.s.) 812158 314577 24191 P08209173 08.0707 V4069 * The certification number might change due to revision of the application standard and changes in the range of acquisition. * Please contact us when the certification of Chinese Safety Standard or South Korean Safety Standard is necessary. q t Manufactured Date Code UL Approval Mark CSA Approval Mark FI VDE Approval Mark MJ502 N BSI Approval Mark 8 r SEMKO Approval Mark 250~ D 16 t DEMKO Approval Mark FIMKO Approval Mark NEMKO Approval Mark ESTI Approval Mark IMQ Approval Mark Class Code Rated Voltage Mark KX222M X1Y1 BSI e BSI D FI N MJ502 X1Y1 250~ 11 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) DE11XKX100Jppp 250 SL 10 5% 9 max. 10.0 8.0 max. A5B B5B N5A DE11XKX150Jppp 250 SL 15 5% 9 max. 10.0 8.0 max. A5B B5B N5A DE11XKX220Jppp 250 SL 22 5% 9 max. 10.0 8.0 max. A5B B5B N5A DE11XKX330Jppp 250 SL 33 5% 9 max. 10.0 8.0 max. A5B B5B N5A DE11XKX470Jppp 250 SL 47 5% 9 max. 10.0 8.0 max. A5B B5B N5A DE11XKX680Jppp 250 SL 68 5% 9 max. 10.0 8.0 max. A5B B5B N5A DE1B3KX101Kppp 250 B 100 10% 9 max. 10.0 8.0 max. A5B B5B N5A DE1B3KX151Kppp 250 B 150 10% 9 max. 10.0 8.0 max. A5B B5B N5A DE1B3KX221Kppp 250 B 220 10% 9 max. 10.0 8.0 max. A5B B5B N5A DE1B3KX331Kppp 250 B 330 10% 9 max. 10.0 8.0 max. A5B B5B N5A DE1B3KX471Kppp 250 B 470 10% 9 max. 10.0 8.0 max. A5B B5B N5A DE1B3KX681Kppp 250 B 680 10% 10 max. 10.0 8.0 max. A5B B5B N5A DE1E3KX102MpppA01 250 E 1000 20% 8 max. 10.0 8.0 max. A5B B5B N5A DE1E3KX152MpppA01 250 E 1500 20% 9 max. 10.0 8.0 max. A5B B5B N5A DE1E3KX222MpppA01 250 E 2200 20% 10 max. 10.0 8.0 max. A5B B5B N5A DE1E3KX332MpppA01 250 E 3300 20% 12 max. 10.0 8.0 max. A5B B5B N5A DE1E3KX392MpppA01 250 E 3900 20% 13 max. 10.0 8.0 max. A5B B5B N5A DE1E3KX472MpppA01 250 E 4700 20% 15 max. 10.0 8.0 max. A5B B5B N5A Part Number 4 C85E.pdf Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code. Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. 12 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Standard Certified Type KY/KH/KX Specifications and Test Type KY/KH/KX Specifications andMethods Test Methods Operating Temperature Range: -25 to +125C (-25 to +85C for UL standards ) No. Item Specifications 1 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 2 Marking To be easily legible The capacitor should be visually inspected. 3 Capacitance Within specified tolerance 4 Dissipation Factor (D.F.) Q Char. B, E F SL 5 Insulation Resistance (I.R.) Specifications D.F.V2.5% D.F.V5.0% QU400+20C*1(CF30pF) QU1000 (CU30pF) 10000M min. Test Method The capacitance, dissipation factor and Q should be measured at 20C with 10.1kHz (char. SL: 10.1MHz) and AC5V(r.m.s.) max. The insulation resistance should be measured with DC50050V within 605 sec. of charging. The voltage should be applied to the capacitor through a resistor of 1M. The capacitor should not be damaged when the test voltages from Table 1 are applied between the lead wires for 60 sec. <Table 1> Between Lead No failure Wires Type KY KH KX 6 Dielectric Strength Body Insulation No failure Test Voltage For lead spacing F=5mm AC2000V(r.m.s.) For lead spacing F=7.5mm AC2600V(r.m.s.) AC2600V(r.m.s.) AC4000V(r.m.s.) First, the terminals of the capacitor should be connected together. Then, as shown in the figure at right, a metal foil should be closely wrapped around Metal the body of the capacitor to the about Foil 3 to 6mm distance of about 3 to 6mm from each terminal. Metal Then, the capacitor should be inserted Balls into a container filled with metal balls of about 1mm diameter. Finally, AC voltage from Table 2 is applied for 60 sec. between the capacitor lead wires and metal balls. <Table 2> Type KY KH KX 7 Temperature Characteristics Char. Capacitance Change B Within 10% E Within +20 -55% F Within +30 -80% (Temp. range: -25 to +85C) Char. Temperature Coefficient SL +350 to -1000ppm/C (Temp. range: +20 to +85C) 8 Solderability of Leads Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Test Voltage AC2600V(r.m.s.) AC2600V(r.m.s.) AC4000V(r.m.s.) The capacitance measurement should be made at each step specified in Table 3. <Table 3> Step 1 2 3 4 5 Temperature (C) 202 -252 202 852 202 The lead wire of a capacitor should be dipped into molten solder for 20.5 sec. The depth of immersion is up to about 1.5 to 2.0mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C *1 "C" expresses nominal capacitance value (pF). Continued on the following page. 13 4 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Standard Certifiedand Type KY/KH/KX Type KY/KH/KX Specifications Test MethodsSpecifications and Test Methods Continued from the preceding page. No. 9 Item Soldering Effect (Non-Preheat) 4 Specifications Appearance No marked defect Capacitance Change Within 10% I.R. 1000M min. Dielectric Strength Per Item 6 Appearance No marked defect Capacitance Change Within 10% I.R. 1000M min. Dielectric Strength Per Item 6 Appearance No marked defect Capacitance Within the specified tolerance First the capacitor should be ,,Capacitor Thermal stored at 120+0/-5C for Screen ,, , 60+0/-5 sec. ,, , ,,,,,,,,,, , 1.5 ,,,,,, Then, as in the figure, the lead ,,,,,,,,,, ,,,, , to 2.0mm , ,Molten wires should be immersed in ,, solder of 260+0/-5C up to 1.5 to Solder 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*2 for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*2 Soldering 10 Effect (On-Preheat) 11 Vibration Resistance D.F. Q Char. B, E F SL 12 Humidity (Under Steady State) No marked defect Capacitance Change Char. B E, F SL Capacitance Change Within 10% Within 15% Within 5% Char. B, E F Specifications D.F.V5.0% D.F.V7.5% QU275+5/2C*1(CF30pF) QU350 (CU30pF) SL Humidity 13 Loading Specifications D.F.V2.5% D.F.V5.0% QU400+20C*1(CF30pF) QU1000 (CU30pF) Appearance D.F. Q I.R. 3000M min. Dielectric Strength Per Item 6 Appearance No marked defect Capacitance Change Char. B E, F SL Capacitance Change Within 10% Within 15% Within 5% Char. B, E F Specifications D.F.V5.0% D.F.V7.5% QU275+5/2C*1(CF30pF) QU350 (CU30pF) D.F. Q SL I.R. 3000M min. Dielectric Strength Per Item 6 Test Method As shown in the figure, the lead Thermal ,,Capacitor wires should be immersed in ,, solder of 35010C or 2605C up Screen ,,,,,,,,,, , , 1.5 ,,,,,,,,,, ,,,,,, , to 1.5 to 2.0mm from the root of , to 2.0mm ,,,, , terminal for 3.50.5 sec. (101 ,Molten ,, sec. for 2605C). Solder Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*2 for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*2 The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. Set the capacitor for 50012 hrs. at 402C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*2 Apply the rated voltage for 50012 hrs. at 402C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*2 *1 "C" expresses nominal capacitance value (pF). *2 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 14 C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 Safety Standard Certified Type KY/KH/KX Specifications and Test Type KY/KH/KX Specifications andMethods Test Methods Continued from the preceding page. No. Item Specifications Appearance No marked defect Capacitance Change Within 20% I.R. 3000M min. Test Method Impulse Voltage Each individual capacitor should be subjected to a 5kV (Type KX: 8kV) impulses for three times. Then the capacitors are applied to life test. 100 (%) 90 Front time (T1) =1.2s=1.67T Time to half-value (T2) =50s 50 30 0 t T T1 14 Life 4 T2 Dielectric Strength Apply a voltage from Table 4 for 1000 hrs. at 125+2/-0C, and relative humidity of 50% max. Per Item 6 <Table 4> Applied Voltage AC425V(r.m.s.), except that once each hour the voltage is increased to AC1000V(r.m.s.) for 0.1 sec. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*2 The capacitor should be subjected to applied flame for 15 sec. and then removed for 15 sec. until 5 cycles are completed. The capacitor flame extinguishes as follows. Cycle 1 to 4 5 Capacitor Flame 76 Time (sec.) 30 max. 60 max. 7 12 38 20 15 Flame Test Gas Burner: Inside Dia. 9.5 Tensile Robustness 16 of Terminations Lead wire should not be cut off. Capacitor should not be broken. As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 101 sec. (in mm) W Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending The capacitor should be individually wrapped in at least one but not more than two complete layers of cheesecloth. The capacitor should be subjected to 20 discharges. The interval between successive discharges should be 5 sec. The UAC should be maintained for 2 min. after the last discharge. F S1 Tr S2 C1 UAC L1 C2 L3 R L2 C3 Cx Ct Ut L4 Oscilloscope 17 Active Flammability The cheesecloth should not be on fire. C1,2 L1 to 4 Ct Cx F : 1F10% C3 : 0.033F5% 10kV : 1.5mH20% 16A Rod core choke : 3F5% 10kV R : 1002% : Capacitor under test UAC : UR5% : Rated Voltage : Fuse, Rated 10A UR : Voltage applied to Ct Ut Ux 5kV time *2 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 15 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Standard Certifiedand Type KY/KH/KX Type KY/KH/KX Specifications Test MethodsSpecifications and Test Methods Continued from the preceding page. Item The burning time should not exceed 30 sec. The tissue paper should not ignite. Test Method The capacitor under test should be held in the flame in the position that best promotes burning. Each specimen should only be exposed once to the flame. Time of exposure to flame: 30 sec. Length of flame : 121mm Gas burner : Length 35mm min. Inside Dia. 0.50.1mm Outside Dia. 0.9mm max. Gas : Butane gas Purity 95% min. Test Specimen About 8mm 18 Passive Flammability Specifications 4 45 200T5mm No. Tissue About 10mm Thick Board No marked defect Capacitance Change Char. B E, F SL Capacitance Change Within 10% Within 20% Within 5% Char. B, E F Specifications D.F.V5.0% D.F.V7.5% QU275+5/2C*1(CF30pF) QU350 (CU30pF) D.F. Q 19 Temperature and Immersion Cycle The capacitor should be subjected to 5 temperature cycles, then consecutively to 2 immersion cycles. Appearance SL I.R. Dielectric Strength 3000M min. <Temperature Cycle> Step 1 2 3 4 Temperature (C) -25+0/-3 Room temp. 125+3/-0 Room temp. <Immersion Cycle> Step Temperature (C) Time (min) 1 65+5/-0 15 2 03 15 Immersion Water Clean water Salt water Cycle time: 2 cycles Per Item 6 Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*2 for 242 hrs. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.*2 *1 "C" expresses nominal capacitance value (pF). *2 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 16 Time (min) 30 3 30 3 Cycle time: 5 cycles C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 Safety Standard Certified Ceramic Capacitors DEJ Series Based on the Electrical Appliance and Material Safety Law of Japan Features <Fig. 1> <Fig. 2> T max. T max. 1. This type is based on the electrical appliance and material safety law of Japan (separated table 4). 2. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 3. Taping available for automatic insertion. 3.0 max. D max. 25.0 min. 25.0 min. e F1.0 od (in mm) Lead Code Coating Extension e [Bulk] Vertical Crimp Long (A3) Straight Long (C3) A3 od Style Up to the end of crimp 0.60.05 Fig. 1 0.60.05 Fig. 2 3.0 max. C3 5 Applications Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. <Fig. 1> <Fig. 2> T max. T max. od 5.01.0 e 5.01.0 D max. 3.0 max. Ideal for use on AC line filters and primary-secondary coupling for switching power supplies and AC adapters. F0.8 (in mm) Lead Code Coating Extension e [Bulk] Vertical Crimp Short (B3) Straight Short (D3) B3 od Style Up to the end of crimp 0.60.05 Fig. 1 0.60.05 Fig. 2 3.0 max. D3 Marking Nominal Body Diameter Temp. Char. Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) DEJE3E2102Zppp 250 E 1000 +80/-20% 7 max. 7.5 DEJE3E2222Zppp 250 E 2200 +80/-20% 8 max. 7.5 DEJE3E2332Zppp 250 E 3300 +80/-20% 9 max. DEJE3E2472Zppp 250 E 4700 +80/-20% 11 max. DEJF3E2472Zppp 250 F 4700 +80/-20% DEJF3E2103Zppp 250 F E, F o7-8mm 102Z 250~ 16 o9-11mm 332Z 250~ 16 Nominal Capacitance Marked with 3 figures Capacitance Tolerance Marked with code Rated Voltage Marked with code Manufacturer's Identification Marked with (omitted for nominal body diameter o8mm and under) Manufactured Date Code Abbreviation Lead Body Spacing F Thickness T (mm) (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) Lead Package Taping (2) 4.0 max. C3B D3B N2A P3A 4.0 max. A3B B3B N2A N3A 7.5 4.0 max. A3B B3B N2A N3A 7.5 4.0 max. A3B B3B N2A N3A 8 max. 7.5 4.0 max. A3B B3B N2A N3A 10000 +80/-20% 11 max. 7.5 4.0 max. A3B B3B N2A N3A Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code. Taping (1): Lead spacing F=5.0mm, Taping (2): Lead spacing F=7.5mm. 17 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DEJ Series Specifications (Which Meet Japanese Specifications and Test Methods and TestLaw) Methods Operating Temperature Range: -25 to +85C No. Item 1 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 2 Marking To be easily legible The capacitor should be visually inspected. 3 Capacitance Within specified tolerance The capacitance should be measured at 20C with 10.1kHz and AC5V(r.m.s.) max. 4 Dissipation Factor (D.F.) 5 Insulation Resistance (I.R.) 5 6 Dielectric Strength Specifications Char. E F Specifications D.F.V2.5% D.F.V5.0% Test Method The dissipation factor should be measured at 20C with 10.1kHz and AC5V(r.m.s.) max. The insulation resistance should be measured with DC50050V within 605 sec. of charging. 10000M min. Between Lead No failure Wires The capacitor should not be damaged when AC1500V(r.m.s.) are applied between the lead wires for 60 sec. Body Insulation First, the terminals of the capacitor should be connected together. Then, as shown in the figure at right, the capacitor should be immersed into 10% salt solution up to a position About of about 3 to 4mm apart from the 3 to 4mm terminals. Electrode Finally, AC1500V(r.m.s.) is applied Plate for 60 sec. between the capacitor lead 10% Salt Solution wires and electrode plate. No failure The capacitance measurement should be made at each step specified in Table 1. <Table 1> 7 Temperature Characteristics Char. E F Appearance No marked defect I.R. 1000M min. Capacitance Change Within +20 -55% Within +30 -80% Step 1 2 3 4 5 Temperature (C) 202 -252 202 852 202 As in Figure 1, discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. R3 S R1 Vs Cd 8 Discharge Test Dielectric Strength Ct: Capacitor under test S: High-voltage switch R1: 1000 Cd Vs 9 Solderability of Leads R2 Fig.1 Per Item 6 Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Ct R2: 100M R3: Surge resistance 0.001F DC10kV The lead wire of a capacitor should be dipped into molten solder for 20.5 sec. The depth of immersion is up to about 1.5 to 2.0mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C Continued on the following page. 18 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DEJ Series (Which Meet Japanese Law) Specifications and Test Methods DEJ Series Continued from the preceding page. No. Item Soldering 10 Effect (Non-Preheat) Soldering 11 Effect (On-Preheat) 12 No marked defect I.R. 1000M min. Dielectric Strength Per Item 6 Appearance No marked defect I.R. 1000M min. 14 15 Solvent Resistance Humidity (Under Steady State) Humidity Insulation First the capacitor should be ,,Capacitor Thermal stored at 120+0/-5C for Screen ,, , ,, , 60+0/-5 sec. ,,,,,,,,,, ,,,,,, , 1.5 ,,,,,,,,,, ,,,, , Then, as in the figure, the lead , to 2.0mm , ,,Molten wires should be immersed in Solder solder of 260+0/-5C up to 1.5 to 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 Per Item 6 Appearance No marked defect Capacitance Within the specified tolerance Vibration Resistance Char. E F Specifications D.F.V2.5% D.F.V5.0% No marked defect Appearance No marked defect Capacitance Change Char. E F Capacitance Change Within 20% Within 30% D.F. Char. E F Specifications D.F.V5.0% D.F.V7.5% I.R. 1000M min. Dielectric Strength Per Item 6 Appearance No marked defect Capacitance Change Char. E F Capacitance Change Within 20% Within 30% D.F. Char. E F Specifications D.F.V5.0% D.F.V7.5% 1000M min. Dielectric Strength Per Item 6 The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. The capacitor should be immersed into a isopropyl alcohol for 305 sec. Appearance I.R. Test Method As shown in the figure, the lead Thermal ,,Capacitor wires should be immersed in Screen , ,, ,,,,,,,,,, , solder of 35010C up to 1.5 to , 1.5 ,,,,,,,,,, ,,,,,, ,,,, , to 2.0mm 2.0mm from the root of terminal for , ,Molten 3.50.5 sec. ,, Solder Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 Dielectric Strength D.F. 13 Specifications Appearance Set the capacitor for 50012 hrs. at 402C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 The capacitor should be subjected to 402C, relative humidity of 90 to 98% for 8 hrs., and then removed in room temperature for 16 hrs. until 5 cycles are completed. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 19 5 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DEJ Series Specifications (Which Meet Japanese Specifications and Test Methods and TestLaw) Methods Continued from the preceding page. 16 Item Humidity Loading 5 17 Life Specifications Appearance No marked defect Capacitance Change Char. E F Capacitance Change Within 20% Within 30% D.F. Char. E F Specifications D.F.V5.0% D.F.V7.5% I.R. 1000M min. Dielectric Strength Per Item 6 Appearance No marked defect Capacitance Change Char. E F I.R. Dielectric Strength Apply the rated voltage for 50012 hrs. at 402C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 Apply a voltage from Table 2 for 1500 hrs. at 852C, relative humidity 50% max. Capacitance Change Within 20% Within 30% 1000M min. <Table 2> Applied Voltage AC500V(r.m.s.), except that once each hour the voltage is increased to AC1000V(r.m.s.) for 0.1 sec. Per Item 6 Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 The capacitor flame discontinued as follows. The capacitor should be subjected to applied flame for 15 sec. and then removed for 15 sec. until 3 cycles are completed. Cycle 1 to 2 3 18 Flame Test Test Method Time (sec.) 15 max. 60 max. 7 Gas Burner: Inside Dia. 9.5 Lead wire should not be cut off. Capacitor should not be broken. W The capacitor should be subjected to 5 temperature cycles, then consecutively to 2 immersion cycles. Appearance No marked defect Capacitance Change Char. E F Capacitance Change Within 20% Within 30% D.F. Char. E F Specifications D.F.V5.0% D.F.V7.5% I.R. (in mm) Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending Temperature and 20 Immersion Cycle 38 As shown in the figure at right, fix the body of the capacitor, apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 101 sec. Tensile Robustness 19 of Terminations Capacitor Flame 76 12 20 No. <Temperature Cycle> Step 1 2 3 4 Temperature (C) -25+0/-3 Room temp. 85+3/-0 Room temp. Time (min) 30 3 30 3 Cycle time: 5 cycles 1000M min. <Immersion Cycle> Dielectric Strength Step Temperature (C) Time (min) 1 65+5/-0 15 2 03 15 Per Item 6 Immersion Water Clean water Salt water Cycle time: 2 cycles Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 20 C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 Safety Certified Ceramic Capacitors Characteristics Data (Typical Example) Capacitance - Temperature Characteristics 40 20 SL Cap. Change (%) 0 B B SL -20 -40 E -60 F E -80 F -100 -40 -20 0 20 40 60 80 100 120 140 5 Temperature (C) Insertion Loss - Frequency Characteristics Type KY Type KH 0 Signal power: 1mW AC240V(r.m.s.) / 60Hz is applied on the capacitor. (1) DE2B3KY101KA2BM01 (2) DE2B3KY221KA2BM01 (3) DE2B3KY471KA2BM01 (4) DE2E3KY102MA2BM01 (5) DE2E3KY222MA2BM01 (6) DE2E3KY472MA2BM01 (7) DE2F3KY103MA3BM02 20 (1) 30 (3) (5) (4) (2) (6) 40 Type KH Signal power: 1mW AC240V(r.m.s.) / 60Hz is applied on the capacitor. 10 Insertion Loss (dB) 10 Insertion Loss (dB) 0 Type KY (1) 30 (5) (4) (2) (3) (6) 40 (7) (7) 50 50 1 10 100 1 1000 10 100 Type KX Small Size Type KX 0 0 Type KX Small Size Signal power: 1mW AC240V(r.m.s.) / 60Hz is applied on the capacitor. (1) DE1B3KX101KA4BL01 (2) DE1B3KX221KA4BL01 (3) DE1B3KX471KA4BL01 (4) DE1E3KX102MA4BL01 (5) DE1E3KX222MA4BL01 (6) DE1E3KX472MA4BL01 20 (3) (2) (1) (4) Signal power: 1mW AC240V(r.m.s.) / 60Hz is applied on the capacitor. (1) DE1B3KX101KA5B (2) DE1B3KX221KA5B (3) DE1B3KX471KA5B (4) DE1E3KX102MA5BA01 (5) DE1E3KX222MA5BA01 (6) DE1E3KX472MA5BA01 20 (1) (2) 30 (5) 40 Type KX 10 Insertion Loss (dB) 10 30 1000 Frequency (MHz) Frequency (MHz) Insertion Loss (dB) (1) DE2B3KH101KA3B (2) DE2B3KH221KA3B (3) DE2B3KH471KA3B (4) DE2E3KH102MA3B (5) DE2E3KH222MA3B (6) DE2E3KH472MA3B (7) DE2F3KH103MA3B 20 (6) (4) (3) (5) (6) 40 50 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) 21 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Certified Ceramic Capacitors Characteristics Data (Typical Example) Leakage Current Characteristics Type KY (E,F char.) Type KY (B char.) AC voltage : 60Hz Temperature : 25C AC voltage : 60Hz Temperature : 25C 6.0 5 Leakage current [mA(r.m.s.)] Leakage current [mA(r.m.s.)] 1.0 0.8 0.6 1 BM0 KA2 Y471 3K E2B D 0.4 2 21KA 3KY2 DE2B 0.2 BM01 2BM01 5.0 Y1 F3K DE2 3.0 DE2E3KY222MA2BM01 DE2E3KY102MA2BM01 1.0 0.0 0.0 0 1000 2000 0 3000 1000 2000 3000 AC voltage [V(r.m.s.)] AC voltage [V(r.m.s.)] Type KH (B char.) Type KH (E, F char.) AC voltage : 60Hz Temperature : 25C AC voltage : 60Hz Temperature : 25C 1.0 6.0 0.8 A3B Leakage current [mA(r.m.s.)] Leakage current [mA(r.m.s.)] M01 472MA2B DE2E3KY 2.0 KA DE2B3KY101 471K 3KH B DE2 0.6 3B 1KA H22 B3K DE2 0.4 3B H101KA 0.2 DE2B3K A3B 03M KH1 F3 DE2 5.0 4.0 3B 72MA 3KH4 DE2E 3.0 2.0 MA3B DE2E3KH222 1.0 DE2E3KH102MA3B 0.0 0.0 0 1000 2000 3000 0 1000 AC voltage [V(r.m.s.)] 2000 3000 AC voltage [V(r.m.s.)] Type KX Small Size (B char.) Type KX Small Size (E char.) AC voltage : 60Hz Temperature : 25C AC voltage : 60Hz Temperature : 25C 1.0 4.0 0.8 71KA 3KX4 DE1B 0.6 01 4BL 1KA X22 3K E1B D 0.4 0.2 01 A4BL 472M 4BL01 L01 01KA4B 1B3KX1 Leakage current [mA(r.m.s.)] Leakage current [mA(r.m.s.)] M02 A3B 03M 4.0 3KX DE1E 3.0 2.0 L01 222MA4B DE1E3KX 1.0 DE1E3KX102MA4BL01 DE 0.0 0.0 0 1000 2000 AC voltage [V(r.m.s.)] 3000 4000 0 1000 2000 3000 4000 AC voltage [V(r.m.s.)] Continued on the following page. 22 C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Ceramic Capacitors Characteristics Data (Typical Example) Continued from the preceding page. Type KX (B char.) Type KX (E char.) AC voltage : 60Hz Temperature : 25C AC voltage : 60Hz Temperature : 25C 6.0 1.0 A5B 471K X B3K DE1 Leakage current [mA(r.m.s.)] Leakage current [mA(r.m.s.)] 1.2 0.8 0.6 0.4 A5B 221K 3KX B DE1 5B X101KA DE1B3K 0.2 0.0 01 5BA 2MA 5.0 47 3KX E DE1 4.0 3.0 5BA01 X222MA DE1E3K 2.0 BA01 DE1E3KX102MA5 1.0 5 0.0 0 1000 2000 AC voltage [V(r.m.s.)] 3000 4000 0 1000 2000 3000 4000 AC voltage [V(r.m.s.)] 23 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Certified Ceramic Capacitors Packaging Taping Specifications 12.7mm pitch / lead spacing 5mm taping Vertical crimp type (Lead Code: N2) S P2 P S D e S P2 P 25.4mm pitch / lead spacing 10.0mm taping Vertical crimp type (Lead Code: N4, N5) h1 R Item 3.0 max. 4.0 max. H0 Lead Code N5 Lead Code P3 W W1 L F W0 W2 H0 od oD0 R H0 Lead Code N2, N3, N4, N7 e D O h2 T max. Marked side S P P0 t2 t1 oD0 N2 P 12.71.0 Pitch of sprocket hole P0 12.70.3 15.00.3 12.70.3 Lead spacing F 5.0 +0.8 -0.2 7.51.0 10.01.0 Length from hole center to component center P2 6.351.3 7.51.5 -- Length from hole center to lead P1 3.850.7 3.751.0 7.71.5 Body diameter D Deviation along tape, left or right S Carrier tape width W Position of sprocket hole W1 Lead distance between reference H0 N3 P3 N7 N5 Code Pitch of component N4 30.02.0 15.02.0 25.42.0 See the individual product specifications. 01.0 02.0 18.00.5 9.00.5 18.0 +2.0 -0 18.0 +2.0 -0 - 20.0 +1.5 -1.0 - - and bottom planes H Protrusion length r +0.5 to -1.0 Diameter of sprocket hole oD0 4.00.1 Lead diameter od 0.6 +0.1 -0.05 0.60.05 Total tape thickness t1 0.60.3 Total thickness, tape and lead wire t2 1.5 max. Body thickness T See the individual product specifications. Portion to cut in case of defect L 11.0 +0 -1.0 Hold down tape width W0 11.5 min. Hold down tape position W2 Coating extension on lead W L P0 P1 W1 e od F oD0 R P0 P1 W W0 L W2 od F H W1 P1 S D W0 W2 H0 D W 30mm pitch / lead spacing 7.5mm taping Vertical crimp type (Lead Code: N7) e P W2 W0 L W1 L P2 oD0 R P0 15mm pitch / lead spacing 7.5mm taping Straight type (Lead Code: P3) 5 od F oD0 R P0 P1 W od F W0 W2 H0 P1 H0 W1 D P e P2 15mm pitch / lead spacing 7.5mm taping Vertical crimp type (Lead Code: N3) e Deviation across tape, front h1 Deviation across tape, rear h2 1.51.5 Up to the end of crimp 1.0 max. 3.0 max. Up to the end of crimp 2.0 max. (in mm) Continued on the following page. 24 C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Ceramic Capacitors Packaging Continued from the preceding page. Packaging Styles Bulk Taping Polyethylene Bag Ammo Pack 5 Minimum Quantity (Order in Sets Only) [Bulk] (pcs./Bag) Body Dia. D (mm) Lead Code Ap, Cp Lead Code Bp, Dp Long Short 7 250 * 500 Type KH 8 to 11 250 500 Type KX (Small Size) 12 to 14 200 250 15, 16 100 200 8, 9 250 500 10 100 250 12 to 15 100 200 Type KY DEJ Series Type KX * Lead Spacing F=5.0mm (Code: A2): 500pcs. [Taping] Lead Code (pcs./Ammo Pack) N2 N3, P3 Type KY 1,000 900 - Type KH - 900 400 Type KX (Small Size) - - 500 Type KX - - 500 1,500 1,000 - DEJ Series N4, N5, N7 25 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Certified Ceramic Capacitors !Caution !Caution (Rating) 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p that contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. Voltage DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2) 5 Positional Measurement V0-p V0-p Vp-p Vp-p Vp-p 2. Operating Temperature and Self-generated Heat (Apply to B/E/F Char.) Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may have self-generated heat due to dielectric loss. Applied voltage load should be such that self-generated heat is within 20C under the condition where the capacitor is subjected to an atmospheric temperature of 25C. When measuring, use a thermocouple of small thermal capacity-K of o0.1mm under conditions where the capacitor is not affected by radiant heat from other components or wind from surroundings. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) 3. Test Condition for Withstanding Voltage (1) Test Equipment Test equipment for AC withstanding voltage should be used with the performance of the wave similar to 50/60Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. Continued on the following page. 26 C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Ceramic Capacitors !Caution Continued from the preceding page. (2) Voltage Applied Method When the withstanding voltage is applied, the capacitor's lead or terminal should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage without the raise from near zero voltage would be applied directly to capacitor, test voltage should be applied with the zero cross.* At the end of the test time, the test voltage should be reduced to near zero, and then capacitor's lead or terminal should be taken off the output of the withstanding voltage test equipment. If the test voltage without the raise from near zero voltage would be applied directly to capacitor, the surge voltage may rise, and therefore, a defect may be caused. *ZERO CROSS is the point where voltage sine wave passes 0V. See the figure at right. 5 Voltage sine wave 0V zero cross 4. Fail-Safe When the capacitor is broken, failure may result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fuming. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 27 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Certified Ceramic Capacitors !Caution !Caution (Storage and Operating Condition) 5 Operating and Storage Environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to moisture. Before cleaning, bonding, or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed -10 to 40 degrees centigrade and 15 to 85%. Use capacitors within 6 months after delivery. Check the solderability after 6 months or more. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. !Caution (Soldering and Mounting) 1. Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment. 2. Soldering When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specifications of the capacitor. Subjecting this product to excessive heating could melt the internal junction solder and may result in thermal shocks that can crack the ceramic element. Soldering the capacitor with a soldering iron should be performed in the following conditions. Temperature of iron-tip: 400 degrees C. max. Soldering iron wattage: 50W max. Soldering time: 3.5 sec. max. 3. Bonding, Resin Molding and Coating For bonding, molding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the performance of the bonded, molded or coated product in the intended equipment. When the amount of applications, dryness/hardening conditions of adhesives and molding resins containing organic solvents (ethyl acetate, methyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is damaged by the organic solvents and it may result, worst case, in a short circuit. The variation in thickness of adhesive, molding resin or coating may cause outer coating resin cracking and/or ceramic element cracking of a capacitor in a temperature cycling. 4. Treatment after Bonding, Resin Molding and Coating When the outer coating is hot (over 100 degrees C.) after soldering, it becomes soft and fragile. Therefore, please be careful not to give it mechanical stress. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. !Caution (Handling) Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. 28 Please confirm there is no influence of holding measures on the product with the intended equipment. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Ceramic Capacitors Notice Notice (Soldering and Mounting) Cleaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the following conditions. Rinse bath capacity: Output of 20 watts per liter or less. Rinsing time: 5 min. maximum. Do not vibrate the PCB/PWB directly. Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires. Notice (Rating) 1. Capacitance Change of Capacitors (1) For SL char. Capacitance might change a little depending on a surrounding temperature or an applied voltage. Please contact us if you use a strict constant time circuit. (2) For B/E/F char. Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a constant time circuit. Please contact us if you need detailed information. 2. Performance Check by Equipment Before using a capacitor, check that there is no problem in the equipment's performance and the specifications. Generally speaking, CLASS 2 (B/E/F char.) ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance, so the capacitance value may change depending on the operating condition in the equipment. Therefore, be sure to confirm the apparatus performance of receiving influence in the capacitance value change of a capacitor, such as leakage current and noise suppression characteristic. Moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed specific value by the inductance of the circuit. 5 29 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf High Voltage Ceramic Capacitors DES Series (125C Guaranteed/Low-dissipation Factor/DC500V-1kV) D max. 25.0 min. e F1.0 od (in mm) Lead Code Coating Extension e od A2, A3 Up to the end of crimp 0.60.05 D max. T max. e Applications od Ideal for use on high-frequency pulse circuits such as snubber circuits for switching power supplies. 3.0 max. [Bulk] Vertical Crimp Long (A2,A3) 1.0 3.50.5 6 1. Low dissipation factor series that can be used for power supplies with an increased switching frequency. 2. The allowable power in the 100 to 300kHz band is improved to approximately one and a half times that of the DEH series while remaining the same size. 3. Operating temperature range is guaranteed up to 125 degrees C. 4. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 5. Taping available for automatic insertion. T max. 3.0 max. Features F0.8 (in mm) Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. [Bulk] Vertical Crimp Short (J2,J3) Lead Code Coating Extension e od J2, J3 Up to the end of crimp 0.60.05 Marking Rated Voltage DC500V DC1kV o6mm SD 101 66 SD 101 1KV 66 o7-9mm SD 102K 66 SD 471K 1KV 66 o10-17mm SD 222K 66 SD 152K 1KV 66 Nominal Body Diameter Series Code Temperature Characteristic Nominal Capacitance Capacitance Tolerance Rated Voltage 30 Abbreviation (S) Marked with code Marked with 3 figures Marked with code (omitted for nominal body diameter o6mm) Marked with code (omitted for DC500V) Manufacturer's Identification Marked with Manufactured Date Code Abbreviation (omitted for nominal body diameter o9mm and under) Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 D Characteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk Lead Package Short Bulk Lead Package Taping DESD32H101Kppp 500 100 10% 6 5.0 4.0 A2B J2B N2A DESD32H151Kppp 500 150 10% 6 5.0 DESD32H221Kppp 500 220 10% 6 5.0 4.0 A2B J2B N2A 4.0 A2B J2B DESD32H331Kppp 500 330 10% 6 N2A 5.0 4.0 A2B J2B DESD32H471Kppp 500 470 10% N2A 6 5.0 4.0 A2B J2B DESD32H681Kppp 500 N2A 680 10% 6 5.0 4.0 A2B J2B N2A DESD32H102Kppp DESD32H152Kppp 500 1000 10% 8 5.0 4.0 A2B J2B N2A 500 1500 10% 9 5.0 4.0 A2B J2B N2A DESD32H222Kppp 500 2200 10% 10 5.0 4.0 A2B J2B N2A DESD32H332Kppp 500 3300 10% 12 7.5 4.0 A3B J3B N3A DESD32H472Kppp 500 4700 10% 14 7.5 4.0 A3B J3B N7A DESD33A101Kppp 1000 100 10% 6 5.0 4.5 A2B J2B N2A DESD33A151Kppp 1000 150 10% 6 5.0 4.5 A2B J2B N2A DESD33A221Kppp 1000 220 10% 6 5.0 4.5 A2B J2B N2A DESD33A331Kppp 1000 330 10% 6 5.0 4.5 A2B J2B N2A DESD33A471Kppp 1000 470 10% 7 5.0 4.5 A2B J2B N2A DESD33A681Kppp 1000 680 10% 8 5.0 4.5 A2B J2B N2A DESD33A102Kppp 1000 1000 10% 9 5.0 4.5 A2B J2B N2A DESD33A152Kppp 1000 1500 10% 10 5.0 4.5 A2B J2B N2A DESD33A222Kppp 1000 2200 10% 12 7.5 4.5 A3B J3B N3A DESD33A332Kppp 1000 3300 10% 14 7.5 4.5 A3B J3B N7A DESD33A472Kppp 1000 4700 10% 17 7.5 4.5 A3B J3B N7A 6 Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 31 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DESSeries Series Specifications and Test Methods DES (125C Guaranteed / Low-dissipation Factor / DC500V-1kV) Specifications and Test Methods No. Item Test Method 1 Operating Temperature Range 2 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking To be easily legible The capacitor should be visually inspected. No failure The capacitor should not be damaged when DC voltage of 200% of the rated voltage (DC1kV) or DC voltage of 250% of the rated voltage (DC500V) is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) No failure The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and AC1250V(r.m.s.) <50/60Hz> is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) Between Lead Wires 4 Dielectric Strength Body Insulation 6 Specifications -25 to +125C 10000M min. The insulation resistance should be measured with DC50050V within 605 sec. of charging. Capacitance Within specified tolerance The capacitance should be measured at 20C with 10.2kHz and AC5V(r.m.s.) max. Dissipation Factor (D.F.) 0.3% max. The dissipation factor should be measured at 20C with 10.2kHz and AC5V(r.m.s.) max. Within +20/-30% (Temp. range: -25 to +125C) The capacitance measurement should be made at each step specified in the Table. 5 Insulation Resistance (I.R.) 6 7 8 Between Lead Wires Temperature Characteristics Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before measurements. 2 3 4 5 1 Step 202 -253 202 1252 202 Temp. (C) Pull 9 Lead wire should not be cut off. Capacitor should not be broken. Strength of Lead 11 12 Vibration Resistance Appearance No marked defect Capacitance Within specified tolerance D.F. 0.3% max. Solderability of Leads Soldering Effect (Non-Preheat) As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 101 sec. W Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending 10 About 2mm Metal balls Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Appearance No marked defect Capacitance Change Within 10% Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 20.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C The lead wire should be immersed into the melted solder of 35010C up to about 1.5 to 2mm from the main body for 3.50.5 sec. Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 32 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DES Series Specifications andand Test Methods DES Series (125C Guaranteed / Low-dissipation Factor / DC500V-1kV) Specifications Test Methods Continued from the preceding page. No. 13 14 15 16 17 Item Soldering Effect (On-Preheat) Temperature Cycle Humidity (Under Steady State) Humidity Loading Life Specifications Appearance No marked defect Capacitance Change Within 10% Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Within 10% D.F. 0.4% max. I.R. 1000M min. Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Within 10% D.F. 0.4% max. I.R. 1000M min. Appearance No marked defect Capacitance Change Within 10% D.F. 0.6% max. I.R. 1000M min. Appearance No marked defect Capacitance Change Within 10% D.F. 0.4% max. I.R. 2000M min. Test Method First the capacitor should be , Capacitor Thermal stored at 120+0/-5C for Screen, , 60+0/-5 sec. , , ,,,,,,,,,, ,,,,,, , 1.5 Then, as in the figure, the lead ,,,,,,,,,, ,,,, , , to 2.0mm , wires should be immersed in ,,,Molten solder of 260+0/-5C up to 1.5 to Solder 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* The capacitor should be subjected to 5 temperature cycles. <Temperature Cycle> Step 1 2 3 4 Temperature (C) Time (min) -253 30 Room Temp. 3 1253 30 Room Temp. 3 Cycle time: 5 cycles Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* Set the capacitor for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* Apply the rated voltage for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* Apply a DC voltage of 200% of the rated voltage (DC500V) or DC voltage of 150% of the rated voltage (DC1kV) for 1000 +48/-0 hrs. at 1252C with a relative humidity of 50% max. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 33 6 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf High Voltage Ceramic Capacitors DEH Series (125C Guaranteed/Low-dissipation Factor/DC500V-3.15kV) Features 1. Reduced heat dissipation permitted due to small dielectric loss of the ceramic material. 2. Operating temperature range is guaranteed up to 125 degrees C. 3. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 4. Taping available for automatic insertion. <Fig. 2> T max. T max. 25.0 min. F1.0 od (in mm) Lead Code Coating Extension e Fig. 1 0.60.05 Fig. 2 3.0 max. <Fig. 1> <Fig. 2> T max. T max. od 5.01.0 e F0.8 (in mm) Lead Code Coating Extension e [Bulk] Vertical Crimp Short (Fig. 1) Straight Short (Fig. 2) 0.60.05 Fig. 2 D3 3.0 max. 34 C R o7-9mm HR C 152K 66 HR R 102K 1KV 66 o10-21mm HR C 472K 66 HR R 272K 3KV 66 Capacitance Tolerance Rated Voltage DC1-3.15kV HR 471 66 Nominal Capacitance HR Marked with code (omitted for nominal body diameter o6mm) Marked with 3 figures Marked with code (omitted for nominal body diameter o6mm) DC500V Omitted DC1-3.15kV Marked with code (for DC3.15kV, marked with 3KV) Manufacturer's Identification Marked with Manufactured Date Code Abbreviation Style Fig. 1 o6mm Temperature Characteristics od B2, B3, B4 Up to the end of crimp 0.60.05 DC500V Temp. Char. High Temperature Guaranteed Code 5.01.0 C3 Marking Nominal Body Diameter Style A2, A3, A4 Up to the end of crimp 0.60.05 D max. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. od 3.0 max. [Bulk] Vertical Crimp Long (Fig. 1) Straight Long (Fig. 2) Ideal for use on high-frequency pulse circuits such as a horizontal resonance circuit for CTV and snubber circuits for switching power supplies. Rated Voltage 25.0 min. e Applications 7 <Fig. 1> 3.0 max. D max. (omitted for nominal body diameter o9mm and under) Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DC500V, C Characteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk Lead Package Short Bulk Lead Package Taping DEHC32H331Kppp 500 330 10% 6 5.0 4.0 A2B B2B N2A DEHC32H471Kppp 500 470 10% 6 5.0 DEHC32H681Kppp 500 680 10% 7 5.0 4.0 A2B B2B N2A 4.0 A2B B2B DEHC32H102Kppp 500 1000 10% 8 N2A 5.0 4.0 A2B B2B DEHC32H152Kppp 500 1500 10% N2A 9 5.0 4.0 A2B B2B DEHC32H222Kppp 500 N2A 2200 10% 10 5.0 4.0 A2B B2B N2A DEHC32H332Kppp DEHC32H472Kppp 500 3300 10% 12 5.0 4.0 A2B B2B N2A 500 4700 10% 14 10.0 4.0 A4B B4B - Lead Package Short Bulk Lead Package Taping Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. DC1-3.15kV, R Characteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk DEHR33A221Kppp 1000 220 10% 7 5.0 4.5 A2B B2B N2A DEHR33A331Kppp 1000 330 10% 7 5.0 4.5 A2B B2B N2A DEHR33A471Kppp 1000 470 10% 7 5.0 4.5 A2B B2B N2A DEHR33A681Kppp 1000 680 10% 8 5.0 4.5 A2B B2B N2A DEHR33A102Kppp 1000 1000 10% 9 5.0 4.5 A2B B2B N2A DEHR33A152Kppp 1000 1500 10% 11 5.0 4.5 A2B B2B N2A DEHR33A222Kppp 1000 2200 10% 13 7.5 4.5 A3B B3B N3A DEHR33A332Kppp 1000 3300 10% 15 7.5 4.5 A3B B3B N7A DEHR33A472Kppp 1000 4700 10% 17 7.5 4.5 A3B B3B N7A DEHR33D221Kppp 2000 220 10% 7 7.5 5.0 C3B D3B P3A DEHR33D271Kppp 2000 270 10% 7 7.5 5.0 C3B D3B P3A DEHR33D331Kppp 2000 330 10% 8 7.5 5.0 A3B B3B N3A DEHR33D391Kppp 2000 390 10% 8 7.5 5.0 A3B B3B N3A DEHR33D471Kppp 2000 470 10% 9 7.5 5.0 A3B B3B N3A DEHR33D561Kppp 2000 560 10% 9 7.5 5.0 A3B B3B N3A DEHR33D681Kppp 2000 680 10% 10 7.5 5.0 A3B B3B N3A DEHR33D821Kppp 2000 820 10% 11 7.5 5.0 A3B B3B N3A DEHR33D102Kppp 2000 1000 10% 12 7.5 5.0 A3B B3B N3A DEHR33D122Kppp 2000 1200 10% 12 7.5 5.0 A3B B3B N3A DEHR33D152Kppp 2000 1500 10% 12 7.5 5.0 A3B B3B N3A DEHR33D182Kppp 2000 1800 10% 14 7.5 5.0 A3B B3B N7A DEHR33D222Kppp 2000 2200 10% 15 7.5 5.0 A3B B3B N7A DEHR33D272Kppp 2000 2700 10% 17 7.5 5.0 A3B B3B N7A DEHR33D332Kppp 2000 3300 10% 19 10.0 5.0 A4B B4B - DEHR33D392Kppp 2000 3900 10% 20 10.0 5.0 A4B B4B - DEHR33D472Kppp 2000 4700 10% 21 10.0 5.0 A4B B4B - DEHR33F151Kppp 3150 150 10% 7 7.5 6.0 C3B D3B P3A DEHR33F181Kppp 3150 180 10% 7 7.5 6.0 C3B D3B P3A DEHR33F221Kppp 3150 220 10% 7 7.5 6.0 C3B D3B P3A DEHR33F271Kppp 3150 270 10% 7 7.5 6.0 C3B D3B P3A DEHR33F331Kppp 3150 330 10% 8 7.5 6.0 A3B B3B N3A DEHR33F391Kppp 3150 390 10% 9 7.5 6.0 A3B B3B N3A DEHR33F471Kppp 3150 470 10% 10 7.5 6.0 A3B B3B N3A DEHR33F561Kppp 3150 560 10% 10 7.5 6.0 A3B B3B N3A DEHR33F681Kppp 3150 680 10% 11 7.5 6.0 A3B B3B N3A DEHR33F821Kppp 3150 820 10% 12 7.5 6.0 A3B B3B N3A DEHR33F102Kppp 3150 1000 10% 13 7.5 6.0 A3B B3B N3A DEHR33F122Kppp 3150 1200 10% 14 7.5 6.0 A3B B3B N7A DEHR33F152Kppp 3150 1500 10% 15 7.5 6.0 A3B B3B N7A 7 Continued on the following page. 35 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Continued from the preceding page. Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk DEHR33F182Kppp 3150 1800 10% 16 7.5 6.0 DEHR33F222Kppp 3150 2200 10% 17 7.5 6.0 DEHR33F272Kppp 3150 2700 10% 19 10.0 6.0 Lead Package Short Bulk Lead Package Taping A3B B3B N7A A3B B3B N7A A4B B4B - Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 7 36 Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DEH Series (125C Guaranteed / Low-dissipationDEH FactorSeries / DC250V-3.15kV) Specifications and Test Methods Specifications and Test Methods No. Item Specifications Test Method Operating Temperature Range -25 to +125C 2 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking To be easily legible The capacitor should be visually inspected. No failure The capacitor should not be damaged when DC voltage of 200% of the rated voltage (DC1 to 3.15kV) or DC voltage of 250% of the rated voltage (DC500V) is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) No failure The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and AC1250V(r.m.s.) <50/60Hz> is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) 1 Between Lead Wires Dielectric Strength 4 Body Insulation 10000M min. The insulation resistance should be measured with DC50050V within 605 sec. of charging. Capacitance Within specified tolerance The capacitance should be measured at 20C with 10.2kHz and AC5V(r.m.s.) max. Dissipation Factor (D.F.) Char. R: 0.2% max. Char. C: 0.3% max. The dissipation factor should be measured at 20C with 10.2kHz and AC5V(r.m.s.) max. 5 Insulation Resistance (I.R.) 6 7 Between Lead Wires T. C. R C 8 About 2mm Metal balls Temp. Char. -25 to +85C +85 to +125C Within 15% Within +15/-30% Within 20% 7 The capacitance measurement should be made at each step specified in the Table. Temperature Characteristics Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before measurements. Step Temp. (C) 1 202 Pull 9 Lead wire should not be cut off. Capacitor should not be broken. Strength of Lead Vibration Resistance Appearance No marked defect Capacitance Within specified tolerance D.F. Char. R: 0.2% max. Char. C: 0.3% max. 11 Solderability of Leads Soldering Effect 12 (Non-Preheat) *1 3 202 4 1252 5 202 As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N (5N for lead diameter 0.5mm), and keep it for 101 sec. W Each lead wire should be subjected to 5N (2.5N for lead diameter 0.5mm) of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending 10 2 -253 Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Appearance No marked defect Capacitance Change Within 10% Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 20.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C The lead wire should be immersed into the melted solder of 35010C up to about 1.5 to 2mm from the main body for 3.50.5 sec. Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 37 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DEH Series (125C Guaranteed / Low-dissipation Factor / DC250V-3.15kV) Specifications and Test Methods DEH Series Specifications and Test Methods Continued from the preceding page. No. 13 Item Soldering Effect (On-Preheat) Temperature 14 Cycle 7 15 16 Humidity (Under Steady State) Humidity Loading Specifications Appearance No marked defect Capacitance Change Within 10% Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Within 10% D.F. 0.4% max. I.R. 1000M min. Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Within 10% D.F. 0.4% max. I.R. 1000M min. Appearance No marked defect Capacitance Change Within 10% D.F. 0.6% max. I.R. 1000M min. Appearance No marked defect Capacitance Change Within 10% D.F. 0.4% max. I.R. 2000M min. 17 Life Test Method First the capacitor should be Thermal ,,Capacitor stored at 120+0/-5C for Screen,, , 60+0/-5 sec. ,,,,,,,,,, , 1.5 ,,,,,,,,,, ,,,,,,, , Then, as in the figure, the lead , to 2.0mm ,,,, , wires should be immersed in ,Molten ,, solder of 260+0/-5C up to 1.5 to Solder 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* The capacitor should be subjected to 5 temperature cycles. <Temperature Cycle> Step Temperature (C) Time (min) 1 30 -253 2 3 Room Temp. 3 30 1253 4 3 Room Temp. Cycle time: 5 cycles Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* Set the capacitor for 500 +24/-0 hrs. at 402C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* Apply the rated voltage for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* Apply a DC voltage of 200% of the rated voltage (DC500V) or DC voltage of 150% of the rated voltage (DC1 to 3.15kV) for 1000 +48/-0 hrs. at 1252C with a relative humidity of 50% max. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 38 C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 High Voltage Ceramic Capacitors DEA Series (125C Guaranteed/Class 1/DC1k-3.15kV) D max. T max. 25.0 min. e 25.0 min. F1.0 od (in mm) Lead Code Coating Extension e A2, A3 Style Fig. 1 C1, CD 3.0 max. 0.50.05 Fig. 2 C3 3.0 max. 0.60.05 Fig. 2 D max. Applications 1. Ideal for use as the ballast in backlighting inverters for liquid crystal display. 2. Ideal for use on high-frequency pulse circuits such as a horizontal resonance circuit for CTV and snubber circuits for switching power supplies. od Up to the end of crimp 0.60.05 <Fig. 1> <Fig. 2> T max. T max. od 5.01.0 e 5.01.0 [Bulk] Vertical Crimp Long (Fig. 1) Straight Long (Fig. 2) 3.0 max. 1. Temperature compensating type ceramics realize lower heat dissipation than DEH/DES series. 2. Operating temperature range is guaranteed up to 125 degrees C. 3. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 4. Taping available for automatic insertion. <Fig. 2> T max. 3.0 max. Features <Fig. 1> F0.8 (in mm) Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. Lead Code Coating Extension e B2, B3 [Bulk] Vertical Crimp Short (Fig. 1) Straight Short (Fig. 2) od 8 Style Up to the end of crimp 0.60.05 Fig. 1 D1, DD 3.0 max. 0.50.05 Fig. 2 D3 3.0 max. 0.60.05 Fig. 2 Marking Temp. Char. SL Nominal Body Diameter o4.5-5mm 68 1KV o6mm 39 3KV 66 o7-9mm 181J 2KV 66 o10-16mm 391J 3KV 66 Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code Under 100pF: Actual value, 100pF and over: Marked with 3 figures Marked with code (omitted for nominal body diameter o6mm and under) Marked with code (for DC3.15kV, marked with 3KV) Marked with (omitted for nominal body diameter o9mm and under) Abbreviation (omitted for nominal body diameter o5mm and under) 39 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf SL Characteristics 8 Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk Lead Package Short Bulk Lead Package Taping DEA1X3A100Jppp 1000 10 5% 4.5 5.0 4.0 C1B D1B P2A DEA1X3A120Jppp 1000 12 5% 4.5 5.0 DEA1X3A150Jppp 1000 15 5% 4.5 5.0 4.0 C1B D1B P2A 4.0 C1B D1B DEA1X3A180Jppp 1000 18 5% 4.5 P2A 5.0 4.0 C1B D1B DEA1X3A220Jppp 1000 22 5% P2A 4.5 5.0 4.0 C1B D1B DEA1X3A270Jppp 1000 P2A 27 5% 4.5 5.0 4.0 C1B D1B P2A DEA1X3A330Jppp DEA1X3A390Jppp 1000 33 5% 4.5 5.0 4.0 C1B D1B P2A 1000 39 5% 4.5 5.0 4.0 C1B D1B P2A DEA1X3A470Jppp 1000 47 5% 4.5 5.0 4.0 C1B D1B P2A DEA1X3A560Jppp 1000 56 5% 5 5.0 4.0 C1B D1B P2A DEA1X3A680Jppp 1000 68 5% 5 5.0 4.0 C1B D1B P2A DEA1X3A820Jppp 1000 82 5% 6 5.0 4.0 A2B B2B N2A DEA1X3A101Jppp 1000 100 5% 6 5.0 4.0 A2B B2B N2A DEA1X3A121Jppp 1000 120 5% 6 5.0 4.0 A2B B2B N2A DEA1X3A151Jppp 1000 150 5% 7 5.0 4.0 A2B B2B N2A DEA1X3A181Jppp 1000 180 5% 7 5.0 4.0 A2B B2B N2A DEA1X3A221Jppp 1000 220 5% 8 5.0 4.0 A2B B2B N2A DEA1X3A271Jppp 1000 270 5% 9 5.0 4.0 A2B B2B N2A DEA1X3A331Jppp 1000 330 5% 10 5.0 4.0 A2B B2B N2A DEA1X3A391Jppp 1000 390 5% 10 5.0 4.0 A2B B2B N2A DEA1X3A471Jppp 1000 470 5% 11 5.0 4.0 A2B B2B N2A DEA1X3A561Jppp 1000 560 5% 12 7.5 4.0 A3B B3B N3A DEA1X3D100Jppp 2000 10 5% 4.5 5.0 5.0 C1B D1B P2A DEA1X3D120Jppp 2000 12 5% 4.5 5.0 5.0 C1B D1B P2A DEA1X3D150Jppp 2000 15 5% 4.5 5.0 5.0 C1B D1B P2A DEA1X3D180Jppp 2000 18 5% 4.5 5.0 5.0 C1B D1B P2A DEA1X3D220Jppp 2000 22 5% 4.5 5.0 5.0 C1B D1B P2A DEA1X3D270Jppp 2000 27 5% 4.5 5.0 5.0 C1B D1B P2A DEA1X3D330Jppp 2000 33 5% 4.5 5.0 5.0 C1B D1B P2A DEA1X3D390Jppp 2000 39 5% 5 5.0 5.0 C1B D1B P2A DEA1X3D470Jppp 2000 47 5% 6 5.0 5.0 A2B B2B N2A DEA1X3D560Jppp 2000 56 5% 6 5.0 5.0 A2B B2B N2A DEA1X3D680Jppp 2000 68 5% 6 5.0 5.0 A2B B2B N2A DEA1X3D820Jppp 2000 82 5% 7 5.0 5.0 A2B B2B N2A DEA1X3D101Jppp 2000 100 5% 7 5.0 5.0 A2B B2B N2A DEA1X3D121Jppp 2000 120 5% 8 5.0 5.0 A2B B2B N2A DEA1X3D151Jppp 2000 150 5% 8 5.0 5.0 A2B B2B N2A DEA1X3D181Jppp 2000 180 5% 9 5.0 5.0 A2B B2B N2A DEA1X3D221Jppp 2000 220 5% 10 5.0 5.0 A2B B2B N2A DEA1X3D271Jppp 2000 270 5% 11 5.0 5.0 A2B B2B N2A DEA1X3D331Jppp 2000 330 5% 12 7.5 5.0 A3B B3B N3A DEA1X3D391Jppp 2000 390 5% 13 7.5 5.0 A3B B3B N3A DEA1X3D471Jppp 2000 470 5% 14 7.5 5.0 A3B B3B N7A DEA1X3D561Jppp 2000 560 5% 15 7.5 5.0 A3B B3B N7A DEA1X3F100Jppp 3150 10 5% 5 7.5 6.0 CDB DDB P3A DEA1X3F120Jppp 3150 12 5% 5 7.5 6.0 CDB DDB P3A DEA1X3F150Jppp 3150 15 5% 5 7.5 6.0 CDB DDB P3A DEA1X3F180Jppp 3150 18 5% 5 7.5 6.0 CDB DDB P3A DEA1X3F220Jppp 3150 22 5% 5 7.5 6.0 CDB DDB P3A DEA1X3F270Jppp 3150 27 5% 6 7.5 6.0 C3B D3B P3A DEA1X3F330Jppp 3150 33 5% 6 7.5 6.0 C3B D3B P3A DEA1X3F390Jppp 3150 39 5% 6 7.5 6.0 C3B D3B P3A DEA1X3F470Jppp 3150 47 5% 7 7.5 6.0 C3B D3B P3A DEA1X3F560Jppp 3150 56 5% 7 7.5 6.0 C3B D3B P3A Continued on the following page. 40 Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Continued from the preceding page. Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk Lead Package Short Bulk Lead Package Taping DEA1X3F680Jppp 3150 68 5% 8 7.5 6.0 DEA1X3F820Jppp 3150 82 5% 8 7.5 6.0 A3B B3B N3A A3B B3B DEA1X3F101Jppp 3150 100 5% 9 7.5 N3A 6.0 A3B B3B DEA1X3F121Jppp 3150 120 5% 10 N3A 7.5 6.0 A3B B3B N3A DEA1X3F151Jppp 3150 150 5% DEA1X3F181Jppp 3150 180 5% 11 7.5 6.0 A3B B3B N3A 11 7.5 6.0 A3B B3B DEA1X3F221Jppp 3150 N3A 220 5% 12 7.5 6.0 A3B B3B DEA1X3F271Jppp N3A 3150 270 5% 14 7.5 6.0 A3B B3B N7A DEA1X3F331Jppp 3150 330 5% 15 7.5 6.0 A3B B3B N7A DEA1X3F391Jppp 3150 390 5% 16 7.5 6.0 A3B B3B N7A Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 8 41 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DEASeries Series(125C Specifications Test /Methods DEA Guaranteedand / Class1 DC1kV-3.15kV) Specifications and Test Methods No. Item Specifications Test Method 1 Operating Temperature Range -25 to +125C 2 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking To be easily legible The capacitor should be visually inspected. No failure The capacitor should not be damaged when DC voltage of 200% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) No failure The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and AC1250V(r.m.s.) <50/60Hz> is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) Between Lead Wires 4 Dielectric Strength Body Insulation 10000M min. The insulation resistance should be measured with DC50050V within 605 sec. of charging. Capacitance Within specified tolerance The capacitance should be measured at 20C with 10.2MHz and AC5V(r.m.s.) max. Q 400+20C*2min. (30pF under) 1000 min. (30pF min.) The Q should be measured at 20C with 10.2MHz and AC5V(r.m.s.) max. +350 to -1000ppm/C (Temp. range: +20 to +85C) The capacitance measurement should be made at each step specified in the Table. 5 Insulation Resistance (I.R.) 6 7 8 Between Lead Wires Temperature Characteristics Step Temp. (C) 1 202 8 Pull 9 Lead wire should not be cut off. Capacitor should not be broken. Strength of Lead 11 12 Vibration Resistance Appearance No marked defect Capacitance Within specified tolerance Q 400+20C*2min. (30pF under) 1000 min. (30pF min.) Solderability of Leads Soldering Effect (Non-Preheat) 2 -253 3 202 4 852 5 202 As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N (5N for lead diameter 0.5mm), and keep it for 101 sec. W Each lead wire should be subjected to 5N (2.5N for lead diameter 0.5mm) of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending 10 About 2mm Metal balls Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Appearance No marked defect Capacitance Change Within 2.5% Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 20.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C The lead wire should be immersed into the melted solder of 35010C (Body of o5mm and under: 2705C) up to about 1.5 to 2mm from the main body for 3.50.5 sec. (Body of o5mm and under: 50.5 sec.) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 42 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Series Specifications DEA Series (125C Guaranteed / Class1 /DEA DC1kV-3.15kV) Specificationsand andTest Test Methods Methods Continued from the preceding page. No. 13 14 15 16 17 Item Soldering Effect (On-Preheat) Temperature Cycle Humidity (Under Steady State) Humidity Loading Specifications Test Method First the capacitor should be , Capacitor Thermal stored at 120+0/-5C for Screen, , 60+0/-5 sec. , , ,,,,,,,,,, , 1.5 ,,,,,, Then, as in the figure, the lead ,,,,,,,,,, ,,,, , , to 2.0mm wires should be immersed in , ,,,Molten solder of 260+0/-5C up to 1.5 to Solder 2.0mm from the root of terminal for 7.5+0/-1 sec. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 Appearance No marked defect Capacitance Change Within 2.5% Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Within 5% Q 275+5/2C*2min. (30pF under) 350 min. (30pF min.) I.R. 1000M min. Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Within 5% Set the capacitor for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. Q 275+5/2C*2min. (30pF under) 350 min. (30pF min.) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 I.R. 1000M min. Appearance No marked defect Capacitance Change Within 5% Q 275+5/2C*2min. (30pF under) 350 min. (30pF min.) I.R. 1000M min. Appearance No marked defect Capacitance Change Within 3% Q 275+5/2C*2min. (30pF under) 350 min. (30pF min.) I.R. 2000M min. Life The capacitor should be subjected to 5 temperature cycles. <Temperature Cycle> Step 1 2 3 4 Temperature (C) Time (min) -253 30 Room Temp. 3 1253 30 Room Temp. 3 Cycle time: 5 cycles Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 Apply the rated voltage for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 Apply a DC voltage of 150% of the rated voltage for 1000+48/-0 hrs. at 1252C with a relative humidity of 50% max. (Charge/Discharge currentV50mA) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). 1 43 8 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf High Voltage Ceramic Capacitors DEB Series (Class 2/DC1k-3.15kV) D max. 1. Small size and high capacitance 2. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 3. Taping available for automatic insertion. <Fig. 2> T max. T max. 3.0 max. Features <Fig. 1> 25.0 min. 25.0 min. e F1.0 od (in mm) Lead Code Coating Extension e [Bulk] Vertical Crimp Long (Fig. 1) Straight Long (Fig. 2) Applications A2, A3 od Style Up to the end of crimp 0.60.05 Fig. 1 C1, CD 3.0 max. 0.50.05 Fig. 2 C3 3.0 max. 0.60.05 Fig. 2 Ideal for use on decoupling circuits for power supplies. <Fig. 2> T max. T max. od 5.01.0 e 5.01.0 Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. <Fig. 1> 3.0 max. D max. F0.8 (in mm) Lead Code Coating Extension e B2, B3 [Bulk] Vertical Crimp Short (Fig. 1) Straight Short (Fig. 2) od Fig. 1 D1, DD 3.0 max. 0.50.05 Fig. 2 D3 3.0 max. 0.60.05 Fig. 2 9 Marking Temp. Char. B E F o4.5-5mm 221 3KV 102 1KV 102 2KV o6mm 331 3KV 66 102 2KV 66 222 1KV 66 o7-9mm 102K 3KV 66 102Z 3KV 66 472Z 2KV 66 o10-16mm B 332K 3KV 66 E 472Z 3KV 66 103Z 2KV 66 Nominal Body Diameter Temperature Characteristics Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code 44 Marked with code for char. B and E (omitted for nominal body diameter o9mm and under) Marked with 3 figures Marked with code (omitted for nominal body diameter o6mm and under) Marked with code (for DC3.15kV, marked with 3KV) Marked with Style Up to the end of crimp 0.60.05 (omitted for nominal body diameter o9mm and under) Abbreviation (omitted for nominal body diameter o5mm and under) Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 B Characteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk Lead Package Short Bulk Lead Package Taping DEBB33A101Kppp 1000 100 10% 4.5 5.0 4.0 C1B D1B P2A DEBB33A151Kppp 1000 150 10% 4.5 5.0 DEBB33A221Kppp 1000 220 10% 4.5 5.0 4.0 C1B D1B P2A 4.0 C1B D1B DEBB33A331Kppp 1000 330 10% 4.5 P2A 5.0 4.0 C1B D1B DEBB33A471Kppp 1000 470 10% P2A 5 5.0 4.0 C1B D1B DEBB33A681Kppp 1000 P2A 680 10% 6 5.0 4.0 A2B B2B N2A DEBB33A102Kppp DEBB33A152Kppp 1000 1000 10% 6 5.0 4.0 A2B B2B N2A 1000 1500 10% 8 5.0 4.0 A2B B2B N2A DEBB33A222Kppp 1000 2200 10% 9 5.0 4.0 A2B B2B N2A DEBB33A332Kppp 1000 3300 10% 10 5.0 4.0 A2B B2B N2A DEBB33A472Kppp 1000 4700 10% 12 7.5 4.0 A3B B3B N3A DEBB33A682Kppp 1000 6800 10% 15 7.5 4.0 A3B B3B N7A DEBB33D101Kppp 2000 100 10% 4.5 5.0 5.0 C1B D1B P2A DEBB33D151Kppp 2000 150 10% 4.5 5.0 5.0 C1B D1B P2A DEBB33D221Kppp 2000 220 10% 4.5 5.0 5.0 C1B D1B P2A DEBB33D331Kppp 2000 330 10% 5 5.0 5.0 C1B D1B P2A DEBB33D471Kppp 2000 470 10% 6 5.0 5.0 A2B B2B N2A DEBB33D681Kppp 2000 680 10% 7 5.0 5.0 A2B B2B N2A DEBB33D102Kppp 2000 1000 10% 8 5.0 5.0 A2B B2B N2A DEBB33D152Kppp 2000 1500 10% 9 5.0 5.0 A2B B2B N2A DEBB33D222Kppp 2000 2200 10% 10 5.0 5.0 A2B B2B N2A DEBB33D332Kppp 2000 3300 10% 12 7.5 5.0 A3B B3B N3A DEBB33D472Kppp 2000 4700 10% 15 7.5 5.0 A3B B3B N7A DEBB33F101Kppp 3150 100 10% 5 7.5 6.0 CDB DDB P3A DEBB33F151Kppp 3150 150 10% 5 7.5 6.0 CDB DDB P3A DEBB33F221Kppp 3150 220 10% 5 7.5 6.0 CDB DDB P3A DEBB33F331Kppp 3150 330 10% 6 7.5 6.0 C3B D3B P3A DEBB33F471Kppp 3150 470 10% 7 7.5 6.0 C3B D3B P3A DEBB33F681Kppp 3150 680 10% 8 7.5 6.0 A3B B3B N3A DEBB33F102Kppp 3150 1000 10% 9 7.5 6.0 A3B B3B N3A DEBB33F152Kppp 3150 1500 10% 11 7.5 6.0 A3B B3B N3A DEBB33F222Kppp 3150 2200 10% 13 7.5 6.0 A3B B3B N3A DEBB33F332Kppp 3150 3300 10% 15 7.5 6.0 A3B B3B N7A Lead Package Short Bulk Lead Package Taping 9 Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. E Characteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk DEBE33A102Zppp 1000 1000 +80/-20% 5 5.0 4.0 C1B D1B P2A DEBE33A222Zppp 1000 2200 +80/-20% 7 5.0 4.0 A2B B2B N2A DEBE33A472Zppp 1000 4700 +80/-20% 9 5.0 4.0 A2B B2B N2A DEBE33A103Zppp 1000 10000 +80/-20% 13 7.5 4.0 A3B B3B N3A DEBE33D102Zppp 2000 1000 +80/-20% 6 5.0 5.0 A2B B2B N2A DEBE33D222Zppp 2000 2200 +80/-20% 8 5.0 5.0 A2B B2B N2A DEBE33D472Zppp 2000 4700 +80/-20% 11 5.0 5.0 A2B B2B N2A DEBE33D103Zppp 2000 10000 +80/-20% 16 7.5 5.0 A3B B3B N7A DEBE33F102Zppp 3150 1000 +80/-20% 7 7.5 6.0 C3B D3B P3A DEBE33F222Zppp 3150 2200 +80/-20% 10 7.5 6.0 A3B B3B N3A DEBE33F472Zppp 3150 4700 +80/-20% 13 7.5 6.0 A3B B3B N3A Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 45 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf F Characteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk Lead Package Short Bulk Lead Package Taping DEBF33A222Zppp 1000 2200 +80/-20% 6 5.0 4.0 A2B B2B N2A DEBF33A472Zppp 1000 4700 +80/-20% 7 5.0 DEBF33A103Zppp 1000 10000 +80/-20% 10 5.0 4.0 A2B B2B N2A 4.0 A2B B2B DEBF33D102Zppp 2000 1000 +80/-20% 5 N2A 5.0 5.0 C1B D1B DEBF33D222Zppp 2000 2200 +80/-20% P2A 7 5.0 5.0 A2B B2B N2A DEBF33D472Zppp 2000 4700 +80/-20% 9 5.0 5.0 A2B B2B N2A DEBF33D103Zppp 2000 10000 +80/-20% 12 7.5 5.0 A3B B3B N3A Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 9 46 Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Series Specifications and Test Methods DEB Series (Class2 / DC1kV-3.15kV) DEB Specifications and Test Methods No. Item Specifications Test Method 1 Operating Temperature Range -25 to +85C 2 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking To be easily legible The capacitor should be visually inspected. No failure The capacitor should not be damaged when DC voltage of 200% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) No failure The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and DC voltage of 1.3kV is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) Between Lead Wires 4 Dielectric Strength Body Insulation 10000M min. The insulation resistance should be measured with DC50050V within 605 sec. of charging. Capacitance Within specified tolerance The capacitance should be measured at 20C with 10.2kHz and AC5V(r.m.s.) max. Dissipation Factor (D.F.) Char. B, E: 2.5% max. Char. F: 5.0% max. The dissipation factor should be measured at 20C with 10.2kHz and AC5V(r.m.s.) max. Char. B: Within 10% Char. E: Within +20/-55% Char. F: Within +30/-80% The capacitance measurement should be made at each step specified in the Table. 5 Insulation Resistance (I.R.) 6 7 8 Between Lead Wires Temperature Characteristics Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. before measurements. 1 2 3 4 5 Step 202 -253 202 852 202 Temp. (C) Pull 9 Lead wire should not be cut off. Capacitor should not be broken. Strength of Lead 11 12 Vibration Resistance Appearance No marked defect Capacitance Within specified tolerance D.F. Char. B, E: 2.5% max. Char. F: 5.0% max. Solderability of Leads Soldering Effect (Non-Preheat) As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N (5N for lead diameter 0.5mm), and keep it for 101 sec. 9 W Each lead wire should be subjected to 5N (2.5N for lead diameter 0.5mm) of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending 10 About 2mm Metal balls Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Appearance No marked defect Capacitance Change Char. B: Within 5% Char. E: Within 15% Char. F: Within 20% Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 20.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C The lead wire should be immersed into the melted solder of 35010C (Body of o5mm and under: 2705C) up to about 1.5 to 2mm from the main body for 3.50.5 sec. (Body of o5mm and under: 50.5 sec.) Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.* * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 47 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Specifications and Test Methods DEB Series (Class2 / DC1kV-3.15kV) Specifications and Test Methods Continued from the preceding page. No. 13 14 9 15 16 17 Item Specifications Appearance No marked defect Capacitance Change Char. B: Within 5% Char. E: Within 15% Char. F: Within 20% Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Char. B: Within 10% Char. E: Within 20% Char. F: Within 30% D.F. Char. B, E: 4.0% max. Char. F: 7.5% max. I.R. 2000M min. Soldering Effect (On-Preheat) Temperature and Immersion Cycle Humidity (Under Steady State) Humidity Loading Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Char. B: Within 10% Char. E: Within 20% Char. F: Within 30% D.F. Char. B, E: 5.0% max. Char. F: 7.5% max. I.R. 1000M min. Appearance No marked defect Capacitance Change Char. B: Within 10% Char. E: Within 20% Char. F: Within 30% D.F. Char. B, E: 5.0% max. Char. F: 7.5% max. I.R. 500M min. Appearance No marked defect Capacitance Change Char. B: Within 10% Char. E: Within 20% Char. F: Within 30% D.F. Char. B, E: 4.0% max. Char. F: 7.5% max. I.R. 2000M min. Life Test Method First the capacitor should be , Capacitor Thermal stored at 120+0/-5C for Screen, , 60+0/-5 sec. , , ,,,,,,,,,, , 1.5 ,,,,,, Then, as in the figure, the lead ,,,,,,,,,, ,,,, , , to 2.0mm , wires should be immersed in ,,,Molten solder of 260+0/-5C up to 1.5 to Solder 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.* The capacitor should be subjected to 5 temperature cycles, then consecutively to 2 immersion cycles. <Temperature Cycle> Step 1 2 3 4 <Immersion Cycle> Step Temperature (C) Time (min) Immersion Water 1 65+5/-0 15 Clean water 2 03 15 Salt water Cycle time : 2 cycles Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.* Set the capacitor for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* Apply the rated voltage for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. Apply a DC voltage of 150% of the rated voltage for 1000+48/-0 hrs. at 852C with a relative humidity of 50% max. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition* for 242 hrs. * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 48 Temperature (C) Time (min) -253 30 Room Temp. 3 853 30 Room Temp. 3 Cycle time: 5 cycles C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 High Voltage Ceramic Capacitors DEC Series (Class 1, 2/DC6.3kV) Features Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. <Fig. 1> <Fig. 2> T max. T max. 4.0 max. D max. 25.0 min. 25.0 min. e F1.0 od (in mm) Applications [Bulk] Vertical Crimp Long (Fig. 1) Straight Long (Fig. 2) 1. Ideal for use as the ballast in backlighting inverters for liquid crystal displays (SL Char.). 2. Ideal for use on high voltage circuits such as Cockcroft circuits (B Char.). Lead Code Coating Extension e A3 od Style Up to the end of crimp 0.60.05 Fig. 1 0.60.05 Fig. 2 C4 3.0 max. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. Marking Temp. Char. SL Nominal Body Diameter B o7mm 10J 6KV o8-9mm 47J 6KV 66 331K 6KV 66 o10-15mm 151J 6KV 66 B 102K 6KV 66 E 10 Temperature Characteristics Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code 222Z 6KV 66 Marked with code for char. B (omitted for nominal body diameter o9mm and under) Under 100pF: Actual value, 100pF and over: Marked with 3 figures Marked with code Marked with code (for DC6.3kV, marked with 6KV) Marked with (omitted for nominal body diameter o9mm and under) Abbreviation (omitted for nominal body diameter o7mm) 49 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. SL Characteristics DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) DEC1X3J100JA3BMS1 6300 10 5% 7 7.5 7.0 DEC1X3J100JC4BMS1 6300 10 5% 7 10.0 7.0 DEC1X3J120JA3B 6300 12 5% 8 7.5 7.0 DEC1X3J120JC4B 6300 12 5% 8 10.0 7.0 DEC1X3J150JA3B 6300 15 5% 8 7.5 7.0 DEC1X3J150JC4B 6300 15 5% 8 10.0 7.0 DEC1X3J180JA3B 6300 18 5% 9 7.5 7.0 DEC1X3J180JC4B 6300 18 5% 9 10.0 7.0 DEC1X3J220JA3B 6300 22 5% 9 7.5 7.0 DEC1X3J220JC4B 6300 22 5% 9 10.0 7.0 DEC1X3J270JA3B 6300 27 5% 9 7.5 7.0 DEC1X3J270JC4B 6300 27 5% 9 10.0 7.0 DEC1X3J330JA3B 6300 33 5% 9 7.5 7.0 DEC1X3J330JC4B 6300 33 5% 9 10.0 7.0 DEC1X3J390JA3B 6300 39 5% 9 7.5 7.0 DEC1X3J390JC4B 6300 39 5% 9 10.0 7.0 DEC1X3J470JA3B 6300 47 5% 9 7.5 7.0 DEC1X3J470JC4B 6300 47 5% 9 10.0 7.0 DEC1X3J560JC4B 6300 56 5% 10 10.0 7.0 DEC1X3J680JC4B 6300 68 5% 12 10.0 7.0 DEC1X3J820JC4B 6300 82 5% 12 10.0 7.0 DEC1X3J101JC4B 6300 100 5% 13 10.0 7.0 DEC1X3J121JC4B 6300 120 5% 14 10.0 7.0 DEC1X3J151JC4B 6300 150 5% 15 10.0 7.0 DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) DECB33J101KC4B 6300 100 10% 9 10.0 7.0 DECB33J151KC4B 6300 150 10% 9 10.0 7.0 DECB33J221KC4B 6300 220 10% 9 10.0 7.0 DECB33J331KC4B 6300 330 10% 9 10.0 7.0 DECB33J471KC4B 6300 470 10% 10 10.0 7.0 DECB33J681KC4B 6300 680 10% 11 10.0 7.0 DECB33J102KC4B 6300 1000 10% 13 10.0 7.0 DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) DECE33J102ZC4B 6300 1000 +80/-20% 11 10.0 7.0 DECE33J222ZC4B 6300 2200 +80/-20% 15 10.0 7.0 Part Number B Characteristics Part Number 10 E Characteristics Part Number 50 C85E.pdf Jul.13,2011 C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 DEC Series and Specifications and Test Methods DEC Series (Class1, 2 / DC6.3kV) Specifications Test Methods No. Item Specifications Test Method 1 Operating Temperature Range -25 to +85C 2 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking To be easily legible The capacitor should be visually inspected. No failure The capacitor should not be damaged when DC voltage of 200% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) No failure The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and DC voltage of 1.3kV is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) Between Lead Wires 4 Dielectric Strength Body Insulation 10000M min. The insulation resistance should be measured with DC50050V within 605 sec. of charging. Capacitance Within specified tolerance The capacitance should be measured at 20C with 10.2kHz (Char. SL: 10.2MHz) and AC5V(r.m.s.) max. Q Char. SL: 400+20C*2min. (30pF under) 1000 min. (30pF min.) Dissipation Factor (D.F.) Char. B, E: 2.5% max. 5 Insulation Resistance (I.R.) 6 Between Lead Wires 7 Char. SL: +350 to -1000ppm/C (Temp. range: +20 to +85C) Char. B: Within 10% Char. E: Within +20/-55% 8 About 2mm Metal balls The dissipation factor and Q should be measured at 20C with 10.2kHz (Char. SL: 10.2MHz) and AC5V(r.m.s.) max. The capacitance measurement should be made at each step specified in the Table. Temperature Characteristics Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before measurements. (Char. B, E) 2 3 4 5 1 Step 202 -253 202 852 202 Temp. (C) Pull 9 Lead wire should not be cut off. Capacitor should not be broken. Strength of Lead 11 12 Vibration Resistance Appearance No marked defect Capacitance Within specified tolerance Q Char. SL: 400+20C*2min. (30pF under) 1000 min. (30pF min.) D.F. Char. B, E: 2.5% max. Solderability of Leads Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Appearance No marked defect Capacitance Change Char. SL: Within 2.5% Char. B: Within 5% Char. E: Within 15% Dielectric Strength (Between Lead Wires) Per item 4. Soldering Effect (Non-Preheat) W 10 Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending 10 As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 101 sec. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 20.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C The lead wire should be immersed into the melted solder of 35010C up to about 1.5 to 2mm from the main body for 3.50.5 sec. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (Char. SL) Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 (Char. B, E) *1 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 51 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Specifications and Test Methods DEC Series (Class1, 2 / DC6.3kV) Specifications and Test Methods Continued from the preceding page. No. 13 14 10 15 16 17 Item Specifications Appearance No marked defect Capacitance Change Char. SL: Within 2.5% Char. B: Within 5% Char. E: Within 15% Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Char. SL: Within 3% Char. B: Within 10% Char. E: Within 20% Q Char. SL: 275+5/2C*2min. (30pF under) 350 min. (30pF min.) D.F. Char. B, E: 4.0% max. I.R. 2000M min. Soldering Effect (On-Preheat) Temperature and Immersion Cycle Humidity (Under Steady State) Humidity Loading Life Test Method First the capacitor should be , Capacitor Thermal stored at 120+0/-5C for Screen, , 60+0/-5 sec. , , ,,,,,,,,,, , 1.5 ,,,,,, Then, as in the figure, the lead ,,,,,,,,,, ,,,, , , to 2.0mm , wires should be immersed in ,,,Molten solder of 260+0/-5C up to 1.5 to Solder 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (Char. SL) Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 (Char. B, E) The capacitor should be subjected to 5 temperature cycles, then consecutively to 2 immersion cycles. <Temperature Cycle> Step 1 2 3 4 <Immersion Cycle> Step Temperature (C) Time (min) Immersion Water 1 65+5/-0 15 Clean water 2 03 15 Salt water Cycle time: 2 cycles Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Char. SL: Within 5% Char. B: Within 10% Char. E: Within 20% Q Char. SL: 275+5/2C*2min. (30pF under) 350 min. (30pF min.) Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 D.F. Char. B, E: 5.0% max. I.R. 1000M min. Appearance No marked defect Capacitance Change Char. SL: Within 7.5% Char. B: Within 10% Char. E: Within 20% Q Char. SL: 100+10/3C*2min. (30pF under) 200 min. (30pF min.) D.F. Char. B, E: 5.0% max. I.R. 500M min. Appearance No marked defect Capacitance Change Char. SL: Within 3% Char. B: Within 10% Char. E: Within 20% Q Char. SL: 275+5/2C*2min. (30pF under) 350 min. (30pF min.) D.F. Char. B, E: 4.0% max. I.R. 2000M min. Set the capacitor for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 Apply the rated voltage for 500+24/-0 hrs. at 402C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA.) Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (Char. SL) Post-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. (Char. B, E) Apply a DC voltage of 150% of the rated voltage for 1000+48/-0 hrs. at 852C with a relative humidity of 50% max. (Charge/Discharge currentV50mA.) Pre-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (Char. SL) Post-treatment: Capacitor should be stored at 852C for 1 hr., then placed at room condition*1 for 242 hrs. (Char. B, E) *1 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). 52 Temperature (C) Time (min) -253 30 Room Temp. 3 853 30 Room Temp. 3 Cycle time: 5 cycles !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors DEF Series (Only for LCD Backlight Inverter Circuit/6.3kVp-p) D max. 1. Compact size: Diameter is 20% less than DEC series. 2. Low self-heating at high frequency and high voltage due to low dielectric loss of the ceramic material. 3. Operating temperature range is guaranteed up to 105 degrees C. 4. Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 5. Taping available for automatic insertion. T max. 4.0 max. Features 25.0 min. e F1.0 od (in mm) [Bulk] Vertical Crimp Long (A3) Lead Code Coating Extension e od A3 Up to the end of crimp 0.60.05 D max. T max. Ideal for use in LCD backlight inverters. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment. od 1.0 3.50.5 e 4.0 max. Applications F0.8 (in mm) [Bulk] Vertical Crimp Short (J3) Lead Code Coating Extension e od J3 Up to the end of crimp 0.60.05 Marking Temp. Char. CH SL 10J 6K~ 66 33J 6K~ 66 Upper horizontal line - Nominal Body Diameter o7-9mm Temperature Characteristics Nominal Capacitance 11 Actual value Capacitance Tolerance Marked with code Rated Voltage Marked with code (Marked with 6K~) Manufactured Date Code Abbreviation SL Characteristics Part Number Rated Voltage (Vp-p) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk Lead Package Short Bulk Lead Package Taping DEF1XLH100Jppp 6300 10 5% 7 7.5 6.0 DEF1XLH120Jppp 6300 12 5% 7 7.5 6.0 A3B J3B N3A A3B J3B DEF1XLH150Jppp 6300 15 5% 7 7.5 N3A 6.0 A3B J3B DEF1XLH180Jppp 6300 18 5% 7 N3A 7.5 6.0 A3B J3B N3A DEF1XLH220Jppp 6300 22 5% DEF1XLH270Jppp 6300 27 5% 7 7.5 6.0 A3B J3B N3A 8 7.5 6.0 A3B J3B DEF1XLH330Jppp 6300 N3A 33 5% 9 7.5 6.0 A3B J3B DEF1XLH390Jppp N3A 6300 39 5% 9 7.5 6.0 A3B J3B DEF1XLH470Jppp N3A 6300 47 5% 9 7.5 6.0 A3B J3B N3A Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 53 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf CH Characteristics Part Number Rated Voltage (Vp-p) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Lead Body Thickness T Package (mm) Long Bulk Lead Package Short Bulk Lead Package Taping DEF2CLH020Cppp 6300 2 0.25pF 7 7.5 6.0 A3B J3B N3A DEF2CLH030Cppp 6300 3 0.25pF 7 7.5 DEF2CLH040Cppp 6300 4 0.25pF 7 7.5 6.0 A3B J3B N3A 6.0 A3B J3B DEF2CLH050Dppp 6300 5 0.5pF 7 N3A 7.5 6.0 A3B J3B DEF2CLH060Dppp 6300 6 0.5pF N3A 7 7.5 6.0 A3B J3B DEF2CLH070Dppp 6300 N3A 7 0.5pF 8 7.5 6.0 A3B J3B N3A DEF2CLH080Dppp DEF2CLH090Dppp 6300 8 0.5pF 8 7.5 6.0 A3B J3B N3A 6300 9 0.5pF 8 7.5 6.0 A3B J3B DEF2CLH100Jppp N3A 6300 10 5% 8 7.5 6.0 A3B J3B N3A Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code. 11 54 Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DEF Series (Only for LCD Backlight InverterDEF Circuit / 6.3kVp-p) Specifications TestMethods Methods Series Specifications andand Test No. Item Specifications Test Method Operating Temperature Range -25 to +105C 2 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking To be easily legible The capacitor should be visually inspected. No failure The capacitor should not be damaged when DC12.6kV is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) No failure The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2.0mm off the metal balls as shown in the figure at right, and DC voltage of 1.3kV is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) 1 Between Lead Wires 4 Dielectric Strength Body Insulation The insulation resistance should be measured with DC50050V within 605 sec. of charging. Capacitance Within specified tolerance The capacitance should be measured at 20C with 10.2MHz and AC5V(r.m.s.) max. Q 400+20C*2min. (30pF under) 1000 min. (30pF min.) The Q should be measured at 20C with 10.2MHz and AC5V(r.m.s.) max. Char. CH: 060ppm/C Char. SL: +350 to -1000ppm/C (Temp. range: +20 to +85C) The capacitance measurement should be made at each step specified in the Table. Insulation Resistance (I.R.) 6 7 Between Lead Wires Temperature Characteristics Step Temp. (C) 1 202 Pull 9 Lead wire should not be cut off. Capacitor should not be broken. Strength of Lead Vibration Resistance Appearance No marked defect Capacitance Within specified tolerance Q 400+20C*2min. (30pF under) 1000 min. (30pF min.) 11 Solderability of Leads 12 Soldering Effect (Non-Preheat) 2 -253 3 202 4 852 5 202 As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 101 sec. W Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returned to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending 10 Metal balls 10000M min. 5 8 About 2.0mm Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Appearance No marked defect Capacitance Change Within 2.5% Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 20.5 sec. In both cases the depth of dipping is up to about 1.5 to 2.0mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C The lead wire should be immersed into the melted solder of 35010C up to about 1.5 to 2.0mm from the main body for 3.50.5 sec. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 55 11 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 DEF Series (Only for LCD Backlight Circuit / 6.3kVp-p) Specifications and Test Methods DEF Series Specifications and Inverter Test Methods Continued from the preceding page. No. 13 Item Soldering Effect (On-Preheat) Temperature 14 and Immersion Cycle Specifications Appearance No marked defect Capacitance Change Within 2.5% Dielectric Strength (Between Lead Wires) Per item 4. Appearance No marked defect Capacitance Change Within 3% Q 200+10C*2min. (10pF under) 275+5/2C*2min. (10pF min. and 30pF under) 350 min. (30pF min.) I.R. 2000M min. Test Method First the capacitor should be Thermal ,,Capacitor stored at 120+0/-5C for Screen,, , 60+0/-5 sec. ,,,,,,,,,, , 1.5 ,,,,,,,,,, ,,,,,, , Then, as in the figure, the lead , to 2.0mm ,,,, , wires should be immersed in ,Molten ,, solder of 260+0/-5C up to 1.5 to Solder 2.0mm from the root of terminal for 7.5+0/-1 sec. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 The capacitor should be subjected to 5 temperature cycles, then consecutively to 2 immersion cycles. <Temperature Cycle> Step 1 2 3 4 Temperature (C) Time (min) -253 30 Room Temp. 3 1053 30 Room Temp. 3 Cycle time: 5 cycles <Immersion Cycle> Dielectric Strength (Between Lead Wires) Per item 4. Step 1 2 Temperature (C) Time (min) Immersion Water 65+5/-0 15 Clean water 03 15 Salt water Cycle time: 2 cycles Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 Appearance No marked defect Capacitance Change Within 5% Humidity (Under 15 Steady State) Q 16 Life 11 Set the capacitor for 500 +24/-0 hrs. at 402C in 90 to 95% relative humidity. 200+10C* min. (10pF under) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at 2 275+5/2C* min. (10pF min. and 30pF under) room condition.*1 350 min. (30pF min.) 2 I.R. 1000M min. Appearance No marked defect Capacitance Change Within 3% Q 200+10C*2min. (10pF under) 275+5/2C*2min. (10pF min. and 30pF under) 350 min. (30pF min.) I.R. 2000M min. Apply 6.3kVp-p at the frequency in the Table for 1000+48/-0 hrs. at 1052C with a relative humidity of 50% max. (Charge/Discharge currentV50mA.) <Frequency> Capacitance (pF) to 10 12 to 22 27 to 47 Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). 56 Frequency (kHz) 100 45 33 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors Characteristics Data (Typical Example) Capacitance - Temperature Characteristics CH, SL, B, E, F char. C, D, R char. 20 20 10 SL CH B Cap. Change (%) D CH SL B -10 10 -20 -30 -40 E E -50 C R Cap. Change (%) 0 0 -10 -60 -70 -80 F -20 F R C -90 -100 -40 -20 0 20 40 60 Temp. (C) 80 100 120 -30 -40 -20 0 20 40 60 Temperature (C) 80 100 D 120 140 Capacitance - DC Bias Characteristics 20 DESD33A471KA2B DEA1X3D221JA2B 0 Cap. Change (%) DEHR33D102KA3B -20 -40 DEBB33D102KA2B -60 DEBE33D222ZA2B -80 -100 0 500 1000 DC Bias (V) 1500 2000 11 57 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors Packaging Taping Specifications 15.0mm pitch / lead spacing 7.5mm taping Straight type (Lead Code: P3) S e L W0 12.7mm pitch / lead spacing 5.0mm taping Straight type (Lead Code: P2) S P2 S D P e oD0 R P0 3.0 max. P3 N3 H0 Lead Code N3 Lead Code P2, P3 t1 H0 Except DEF Series Code W Lead Code N2, N3, N7 oD0 Item 11 W e L F h2 W0 W2 H0 W1 P1 od O h1 T max. Marked side oD0 R P0 S D P od 4.0 max. R 12.7mm pitch / lead spacing 5.0mm taping Vertical crimp type (Lead Code: N2) P2 F L L P0 P1 W0 W2 H W1 od F W0 W2 H0 W1 W P1 t2 D e P oD0 R P0 30.0mm pitch / lead spacing 7.5mm taping Vertical crimp type (Lead Code: N7) P2 od F oD0 R P0 P1 W W0 L W2 od F H W1 P1 S D P P2 H0 W1 W D W2 P e P2 15.0mm pitch / lead spacing 7.5mm taping Vertical crimp type (Lead Code: N3) DEF Series P2 N7 N2 Pitch of component P Pitch of sprocket hole P0 15.00.3 12.70.3 Lead spacing F 7.51.0 5.0+0.8 -0.2 Length from hole center to component center P2 7.51.5 6.351.3 Length from hole center to lead P1 3.751.0 3.850.7 Body diameter D See the individual product specifications. Deviation along tape, left or right S Carrier tape width W Position of sprocket hole W1 Lead distance between reference and bottom planes H H0 15.02.0 12.71.0 30.02.0 02.0 01.0 18.00.5 9.00.5 20.0 +1.5 -1.0 -- 20.0 +1.5 -1.0 -- -- 18.0 +2.0 -0 -- 18.0 +2.0 -0 r +0.5 to -1.0 Diameter of sprocket hole D0 4.00.1 Lead diameter d 0.60.05 Total tape thickness t1 0.60.3 Total thickness, tape and lead wire t2 1.5 max. Body thickness T See the individual product specifications. Portion to cut in case of defect L Protrusion length 11.0 +0 -1.0 Hold down tape width W0 Hold down tape position W2 1.51.5 e 3.0 max. (Vertical crimp type: Up to the end of crimp) Coating extension on lead Deviation across tape, front h1 Deviation across tape, rear h2 11.5 min. 2.0 max. 1.0 max. (in : mm) Continued on the following page. 58 C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors Packaging Continued from the preceding page. Packaging Styles Bulk Taping Polyethylene Bag Ammo Pack Minimum Quantity (Order in Sets Only) [Bulk] (pcs./Bag) Body Dia. D (mm) Lead Code Ap, Cp Lead Code Bp, Dp, Jp Long Short 500 500 4.5 to 6 DES Series DEH Series DEA Series DEB Series DEC Series DEF Series 7 250 *1 500 8 to 11 250 500 12 200 *2 250 *3 13, 14 200 250 15 to 18 100 200 19 to 21 50 100 7 to 9 250 500 10, 11 100 - 12 to 15 100 - *1 Lead Spacing F=5.0mm (Code: A2): 500pcs. *2 Rated Voltage DC500V (Code: 2H): 250pcs. *3 Rated Voltage DC500V (Code: 2H): 500pcs. [Taping] Lead Code (pcs./Ammo Pack) N2, P2 N3, P3 N7 DES Series 1,500 1,000 500 DEH Series 1,500 900 *4 500 DEA Series 1,500 900 *4 500 DEB Series 1,500 *4 500 DEF Series - 900 900 11 - *4 Rated Voltage DC1kV (Code: 3A): 1,000pcs. 59 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors !Caution !Caution (Rating) <DES/DEH/DEA/DEB/DEC Series> 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p that contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. When using the low-dissipation DEA (SL Char.) /DEC (SL Char.) /DEH (C, R Char.) /DES (D Char.) series in a highfrequency and high-voltage circuit, be sure to read the instructions in item 4. Voltage Positional Measurement 11 DC Voltage V0-p DC+AC Voltage V0-p When DC-rated capacitors are to be used in input circuits from commercial power source (AC filter), be sure to use Safety Certified Capacitors because various regulations on withstand voltage or impulse withstand established for each type of equipment should be taken into consideration. AC Voltage Vp-p Pulse Voltage (1) Vp-p Pulse Voltage (2) Vp-p 2. Operating Temperature and Self-generated Heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. The frequency of the applied sine wave voltage should be less than 300kHz. The applied voltage load (*) should be such that the capacitor's self-generated heat is within 20C in an atmospheric temperature of 25C. When measuring, use a thermocouple of small thermal capacity-K of o0.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) *Before using the low-dissipation DEA/DEC (SL Char.) /DEH/DES series, be sure to read the instructions in item 4. 3. Fail-Safe When the capacitor is broken, failure may result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could follow an electric shock, fire or fume. Continued on the following page. 60 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors !Caution Continued from the preceding page. <Table 1> Allowable Conditions at High frequency DC Temp. Rated Char. Voltage C 500V 1kV DEH R 2kV 3.15kV DEA SL DEC SL DES D Applied Self-heating Temp. Voltage (Max.) (25C Ambient Temp.) *1 500Vp-p 20C Max. 800Vp-p 20C Max. 1000Vp-p 5C Max. 1400Vp-p 20C Max. 2000Vp-p 5C Max. 1600Vp-p 20C Max. 3150Vp-p 1kV 1000Vp-p 2kV 2000Vp-p 3.15kV 3150Vp-p 6.3kV 6300Vp-p 500V 500Vp-p 1kV 800Vp-p 1000Vp-p 5C Max. Capacitor's Ambient Temp. *2 -25 to +85C FAILURE TO FOLLOW THE ABOVE CAUTIONS (ITEMS 1 TO 4) MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. <Fig. 1> Relationship Between Applied Voltage and Self-heating Temperature (Allowable Self-heating Temp. at 25C Ambient Temp.) DEH Series R Char. (Rated Voltage: DC1kV to 3.15kV) 5C Max. 25 20 15 10 5 0 100 11 Rated Voltage: 1kV 2kV 3.15kV 1000 Applied Voltage (Vp-p) 10000 5C Max. DES Series D Char. (Rated Voltage: DC1kV) 15C Max. 5C Max. *1 Fig. 1 shows the relationship between the applied voltage and the allowable selfheating temperature regarding 1 to 3.15kV rated voltage of the DEH series R characteristic and 1kV rated voltage of the DES series D characteristic. *2 When the ambient temperature is 85 to 125C, the applied voltage needs to be further reduced. If the DEA/DEH/DES series needs to be used at an ambient temperature of 85 to 125C, please contact our sales representatives or product engineers. *3 Fig. 3 shows reference data on the allowable voltage - frequency characteristics for a sine wave voltage. Allowable Self-heating Temp. (C) Series Allowable Conditions at High-frequency *3 We are offering free software, The Capacitor Selection Tool: by Voltage Form, which will assist you in selecting a suitable capacitor. The software can be downloaded from Murata's Web site (http://www.murata.com/products/design_support/mmcsv/ index.html). By inputting capacitance values and applied voltage waveform of the specific capacitor series, this software will calculate the capacitor's power consumption and list suitable capacitors. When the result of this software is different from the measurement result of the self-heating temperature on your side, please contact our sales representatives or product engineers. Allowable Self-heating Temp. (C) 4. Load Reduction and Self-generated Heat During Application of High-frequency and High-voltage Due to the low self-heating characteristics of lowdissipation capacitors, the allowable electric power of these capacitors is generally much higher than that of B characteristic capacitors. However, if the self-heating temperature is 20C under a high-frequency voltage whose peak-to-peak value equals the capacitor's rated voltage, the capacitor's power consumption may exceed its allowable electric power. Therefore, when using the DEA/DEC (SL Char.) /DEH /DES series in a high-frequency and high-voltage circuit with a frequency of 1kHz or higher, make sure that the Vp-p values including the DC bias, do not exceed the applied voltage value specified in Table 1. Also make sure that the self-heating temperature (the difference between the capacitor's surface temperature and the capacitor's ambient temperature) at an ambient temperature of 25C does not exceed the value specified in Table 1. As shown in Fig. 2, the self-heating temperature depends on the ambient temperature. Therefore, if you are not able to set the ambient temperature to approximately 25C, please contact our sales representatives or product engineers. 25 20 15 10 5 0 100 Rated Voltage: DC1kV 1000 Applied Voltage (Vp-p) 10000 Continued on the following page. 61 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors !Caution Continued from the preceding page. <Fig. 2> Dependence of Self-heating Temperature on Ambient Temperature DEH Series C Char. and R Char. (Rated Voltage: DC1kV to 3.15kV) DEA/DEC Series SL Char. (Rated Voltage: DC1kV to 6.3kV) 20 Self-heating Temperature (C) Self-heating Temperature (C) 25 20 15 C Char. (500V) R Char. (1 to 3.15kV) 10 5 0 15 10 5 SL Char. (1 to 6.3kV) 0 20 (25) 0 40 60 80 100 Ambient Temperature (C) 0 20 (25) 40 60 80 100 Ambient Temperature (C) DES Series D Char. (Rated Voltage: DC500V to 1kV) Self-heating Temperature (C) 25 20 15 D Char. (500V to 1kV) 10 5 0 0 20 (25) 40 60 80 100 Ambient Temperature (C) Continued on the following page. 11 62 C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors !Caution Continued from the preceding page. <Fig. 3> Allowable Voltage (Sine Wave Voltage) - Frequency Characteristics (At Ambient Temperature of 85C or less) Because of the influence of harmonics, when the applied to the allowable voltage for a sine wave whose fundamental voltage is a rectangular wave or pulse wave voltage (instead frequency is twice as large as that of the rectangular wave or of a sine wave voltage), the heat generated by the capacitor pulse wave. This allowable voltage, however, varies is higher than the value obtained by application of the sine depending on the voltage and current waveforms. wave with the same fundamental frequency. Therefore, you are requested to make sure that the selfRoughly calculated for reference, the allowable voltage for a heating temperature is not higher than the value specified in rectangular wave or pulse wave corresponds approximately Table 1. DEH Series C Char. (Rated Voltage: DC500V) DEH Series R Char. (Rated Voltage: DC1kV) 10000 1000 to 470pF (500) 1000pF Allowable Voltage (Vp-p) Allowable Voltage (Vp-p) 10000 1000 220pF 470pF 1000pF 2200pF 2200pF 4700pF 4700pF 100 1 10 Frequency (kHz) 100 100 1000 DEH Series R Char. (Rated Voltage: DC2kV) 10 Frequency (kHz) 100 1000 DEH Series R Char. (Rated Voltage: DC3.15kV) 10000 1000 220pF 470pF 1000pF 2200pF Allowable Voltage (Vp-p) 10000 Allowable Voltage (Vp-p) 1 (3150) 1000 220pF 470pF 1000pF 2200pF 11 4700pF 100 1 10 Frequency (kHz) 100 100 1000 DEA Series SL Char. (Rated Voltage: DC1kV) 100 1000 10000 to 100pF 220pF 470pF 1000 1 10 Frequency (kHz) 100 1000 Allowable Voltage (Vp-p) Allowable Voltage (Vp-p) 10 Frequency (kHz) DEA Series SL Char. (Rated Voltage: DC2kV) 10000 100 1 10pF 100pF 220pF 470pF 1000 100 1 10 Frequency (kHz) 100 1000 Continued on the following page. 63 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors !Caution Continued from the preceding page. <Fig. 3 (continued)> Allowable Voltage (Sine Wave Voltage) Frequency Characteristics (At Ambient Temperature of 85C or less) Because of the influence of harmonics, when the applied voltage is a rectangular wave or pulse wave voltage (instead of a sine wave voltage), the heat generated by the capacitor is higher than the value obtained by application of the sine wave with the same fundamental frequency. Roughly calculated for reference, the allowable voltage for a rectangular wave or pulse wave corresponds approximately to the allowable voltage for a sine wave whose fundamental frequency is twice as large as that of the rectangular wave or pulse wave. This allowable voltage, however, varies depending on the voltage and current waveforms. Therefore, you are requested to make sure that the selfheating temperature is not higher than the value specified in Table 1. DEA Series SL Char. (Rated Voltage: DC3.15kV) DEC Series SL Char. (Rated Voltage: DC6.3kV) 10000 10000 (3150) Allowable Voltage (Vp-p) Allowable Voltage (Vp-p) (6300) 10pF 100pF 220pF 1000 100 1 10 Frequency (kHz) 100 1000 100 1000 DES Series D Char. (Rated Voltage: DC500V) (500) to 1000pF 2200pF 4700pF 1 10 Frequency (kHz) 100 1000 Allowable Voltage (Vp-p) Allowable Voltage (Vp-p) 10 Frequency (kHz) 100 1000 10000 1000 100 1 DES Series D Char. (Rated Voltage: DC1kV) 10000 11 to 22pF 47pF 100pF 100pF 220pF 470pF 1000pF 2200pF 4700pF 1000 100 1 10 Frequency (kHz) 100 1000 Continued on the following page. 64 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors !Caution Continued from the preceding page. <DEF Series> 1. Operating Voltage The frequency of the applied sine wave voltage should be less than 100kHz. The applied voltage should be less than the value shown in the figure below. For non-sine wave that includes a harmonic frequency, please contact our sales representatives or product engineers. 10000 to 10pF Allowable Voltage (Vp-p) (6300) The temperature of the surface of the capacitor: below the upper limit of its rated operating temperature range (including self-heating). 12 to 22pF 27 to 47pF The capacitor can be applied at a maximum of 6.3kVp-p at 100kHz when the lamp is turned on. Voltage 1000 Positional Measurement 1 10 Frequency (kHz) AC Voltage Vp-p 100 2. Operating Temperature and Self-generated Heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) 3. Fail-Safe When the capacitor is broken, failure may result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fume. 11 65 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors !Caution !Caution (Storage and Operating Condition) Operating and Storage Environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to moisture. Before cleaning, bonding or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed -10 to 40 degrees centigrade and 15 to 85%. Use capacitors within 6 months after delivery. Check the solderability after 6 months or more. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. !Caution (Soldering and Mounting) 11 1. Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment. 2. Soldering When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor. Subjecting this product to excessive heating could melt the internal junction solder and may result in thermal shocks that can crack the ceramic element. Soldering the capacitor with a soldering iron should be performed in following conditions. Temperature of iron-tip: 400 degrees C. max. Soldering iron wattage: 50W max. Soldering time: 3.5 sec. max. 3. Bonding, Resin Molding and Coating For bonding, molding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the performance of the bonded, molded or coated product in the intended equipment. When the amount of applications, dryness/hardening conditions of adhesives and molding resins containing organic solvents (ethyl acetate, methyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is damaged by the organic solvents and it may result, worst case, in a short circuit. The variation in thickness of adhesive, molding resin or coating may cause outer coating resin cracking and/or ceramic element cracking of a capacitor in a temperature cycling. 4. Treatment after Bonding, Resin Molding and Coating When the outer coating is hot (over 100 degrees C.) after soldering, it becomes soft and fragile. Therefore, please be careful not to give it mechanical stress. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. !Caution (Handling) Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. 66 Please confirm there is no influence of holding measures on the product with the intended equipment. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 High Voltage Ceramic Capacitors Notice Notice (Soldering and Mounting) Cleaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the following conditions. Rinse bath capacity: Output of 20 watts per liter or less. Rinsing time: 5 min. maximum. Do not vibrate the PCB/PWB directly. Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires. Notice (Rating) Capacitance Change of Capacitors 1. DEA/DEC/DEF Series (Temp. Char. CH, SL) Capacitance might change a little depending on the surrounding temperature or an applied voltage. Please contact us if you intend to use this product in a strict time constant circuit. 2. DEB/DEC Series (Temp. Char. B, E, F) Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. 3. DEH/DES Series Capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. 11 67 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Standard Certified Ceramic Capacitors for Automotive Type KJ -IEC60384-14 Class X1, Y2D max. T max. 1. Capacitors designed for AC line filters for PHEV/EV. 2. Meet AEC-Q200 3. Heat cycle: 1000cycle (-55/+125 deg.) 4. Class X1/Y2 capacitors certified by UL/ENEC(VDE). 5. Rated Voltage: AC300V 6. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). 7. Available product for RoHS Restriction (EU Directive 2002/95/EC). 8. Taping available for automatic insertion. 3.0 max. Features 25.0 min. e F1.0 od (in mm) [Bulk] Vertical Crimp Long (A3) Lead Code Coating Extension e od A3 Up to the end of crimp 0.60.05 Applications T max. 3.0 max. D max. 1. Ideal for use as Y capacitors for AC line filters and primary-secondary coupling on battery chargers for PHEV/EV. 2. Ideal for use as a filter capacitor for DC-DC converters for PHEV/EV and HEV. 5.01.0 e od F0.8 (in mm) [Bulk] Vertical Crimp Short (B3) Standard Certification Standard No. UL ENEC (VDE) Coating Extension e od B3 Up to the end of crimp 0.60.05 Marking Certified No. UL 60384-14 EN 60384-14 Lead Code E37921 40031217 Example Rated Voltage Item q Type Designation KJ AC300V(r.m.s.) w q t w Nominal Capacitance (Marked with 3 figures) 472M KJ300~ X1 Y2 e 15 r 1D e Capacitance Tolerance r Company Name Code 15: Made in Thailand t Manufactured Date Code Class Code X1Y2 Rated Voltage Mark 300~ 12 AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) DE6B3KJ101Kppp 300 B 100 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE6B3KJ151Kppp 300 B 150 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE6B3KJ221Kppp 300 B 220 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE6B3KJ331Kppp 300 B 330 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE6B3KJ471Kppp 300 B 470 10% 8 max. 7.5 7.0 max. A3B B3B N3A DE6B3KJ681Kppp 300 B 680 10% 9 max. 7.5 7.0 max. A3B B3B N3A DE6E3KJ102Mppp 300 E 1000 20% 7 max. 7.5 7.0 max. A3B B3B N3A DE6E3KJ152Mppp 300 E 1500 20% 8 max. 7.5 7.0 max. A3B B3B N3A DE6E3KJ222Mppp 300 E 2200 20% 9 max. 7.5 7.0 max. A3B B3B N3A DE6E3KJ332Mppp 300 E 3300 20% 10 max. 7.5 7.0 max. A3B B3B N3A DE6E3KJ472Mppp 300 E 4700 20% 12 max. 7.5 7.0 max. A3B B3B N3A Part Number Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code. Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KJ) and capacitance of products in the parts list when it is required for applying safety standard of electric equipment. 68 C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 Safety Standard Certified Type KJ for Automotive Specifications and Test Type KJ Specifications Test Methods Methods Operating Temperature Range: -40 to +125C No. Item Specifications 1 Appearance and Dimensions No visible defect, and dimensions are within specified range. The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 2 Marking To be easily legible The capacitor should be visually inspected. 3 Capacitance Within specified tolerance 4 Dissipation Factor (D.F.) 5 Insulation Resistance (I.R.) Char. B, E Specifications D.F.V2.5% 10000M min. Test Method The dissipation factor should be measured at 20C with 10.1kHz and AC5V(r.m.s.) max. The insulation resistance should be measured with DC50050V within 605 sec. of charging. The voltage should be applied to the capacitor through a resistor of 1M. The capacitor should not be damaged when the test voltages from Table 1 are applied between the lead wires for 60 sec. Between Lead No failure Wires 6 Dielectric Strength Body Insulation No failure <Table 1> Type KJ Test Voltage AC2600V(r.m.s.) First, the terminals of the capacitor should be connected together. Then, as shown in the figure at right, a metal foil should be closely wrapped around Metal the body of the capacitor to the about Foil 3 to 4mm distance of about 3 to 4mm from each terminal. Metal Then, the capacitor should be inserted Balls into a container filled with metal balls of about 1mm diameter. Finally, AC voltage from Table 2 is applied for 60 sec. between the capacitor lead wires and metal balls. <Table 2> Type KJ Test Voltage AC2600V(r.m.s.) The capacitance measurement should be made at each step specified in Table 3. <Table 3> 7 Temperature Characteristics Char. Capacitance Change B Within 10% E Within +20 -55% (Temp. range: -25 to +85C) Step 1 2 3 4 5 Temperature (C) 202 -252 202 852 202 Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. 8 9 Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. Solderability Resistance to Soldering Heat Appearance No marked defect Capacitance Change Within 10% I.R. 1000M min. Dielectric Strength Per Item 6 Should be placed into steam aging for 8 hrs.15 min. After the steam aging, the lead wire of a capacitor should be dipped into an ethanol solution of 25% rosin and then into molten solder for 5+0/-0.5 sec. The depth of immersion is up to about 1.5 to 2.0mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 2455C H63 Eutectic Solder 2355C As shown in the figure, the lead ,, Thermal wires should be immersed in ,,Capacitor ,, , Screen solder of 2605C up to 1.5 to ,, , ,,,,,,,,,, ,,,,,, , 1.5 ,,,,,,,,,, ,,,, , 2.0mm from the root of terminal for to 2.0mm , , 101 sec. ,, ,Molten Pre-treatment: Solder Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 69 12 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Type KJMethods for Automotive Specifications and Test Methods Type KJStandard Specifications and Test Continued from the preceding page. No. Item Specifications Appearance No marked defect Capacitance Within the specified tolerance 10 Vibration D.F. 11 12 13 Mechanical Shock Humidity (Under Steady State) Char. B, E Specifications D.F.V2.5% Appearance No marked defect Capacitance Within the specified tolerance D.F. Char. B, E Specifications D.F.V5.0% I.R. 10000M min. Appearance No marked defect Capacitance Change Char. B E Capacitance Change Within 10% Within 15% D.F. Char. B, E Specifications D.F.V5.0% I.R. 3000M min. Dielectric Strength Per Item 6 Appearance No marked defect Capacitance Change Char. B E Capacitance Change Within 10% Within 15% Char. B, E Specifications D.F.V5.0% Humidity Loading D.F. I.R. 3000M min. Appearance No marked defect Capacitance Change Within 20% I.R. 3000M min. Test Method Solder the capacitor and gum up the body to the test jig Resin (Adhesive) (glass epoxy board) by resin (adhesive). The capacitor should be firmly soldered to the supporting lead wire, 1.5mm in total amplitude, with about a 20 minutes rate of vibration change from 10Hz to 2000Hz and back to 10Hz. This motion should be applied 12 times in each of 3 mutually perpendicular directions (total of 36 times). The acceleration is 5g max. Solder the capacitor and gum up the body to the test Resin (Adhesive) jig (glass epoxy board) by resin (adhesive). Three shocks in each direction should be applied along 3 mutually perpendicular axes to and from of the test specimen (18 shocks). The specified test pulse should be half-sine and should have a duration: 0.5ms, peak value: 100g and velocity change: 4.7m/s. Set the capacitor for 100012 hrs. at 853C in 80 to 85% relative humidity. Pre-treatment: Capacitor should be stored at 1253C for 1hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* Apply the rated voltage for 100012 hrs. at 853C in 80 to 85% relative humidity. Pre-treatment: Capacitor should be stored at 1253C for 1hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* Impulse Voltage Each individual capacitor should be subjected to a 5kV impulses for three times. Then the capacitors are applied to life test. 100 (%) 90 Front time (T1) =1.2s=1.67T Time to half-value (T2) =50s 50 30 0 12 t T T1 14 T2 Apply a voltage from Table 4 for 1000 hrs. at 125+2/-0C, and relative humidity of 50% max. Life Dielectric Strength <Table 4> Per Item 6 Applied Voltage AC510V(r.m.s.), except that once each hour the voltage is increased to AC1000V(r.m.s.) for 0.1 sec. Pre-treatment: Capacitor should be stored at 1253C for 1hr., then placed at room condition* for 242 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 70 C85E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Jul.13,2011 Safety Standard Certified Type KJ for Automotive Specifications and Test Type KJ Specifications Test Methods Methods Continued from the preceding page. No. Item Specifications Test Method The capacitor should be subjected to applied flame for 15 sec. and then removed for 15 sec. until 5 cycles are completed. The capacitor flame extinguishes as follows. Cycle 1 to 4 5 Capacitor Flame 76 Time (sec.) 30 max. 60 max. 7 12 38 20 15 Flame Test Gas Burner: Inside Dia. 9.5 Tensile Robustness 16 of Terminations Lead wire should not be cut off. Capacitor should not be broken. As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 101 sec. (in mm) W Each lead wire should be subjected to 5N of weight and bent 90 at the point of egress, in one direction, then returend to its original position and bent 90 in the opposite direction at the rate of one bend in 2 to 3 sec. Bending The capacitor should be individually wrapped in at least one, but not more than two, complete layers of cheesecloth. The capacitor should be subjected to 20 discharges. The interval between successive discharges should be 5 sec. The UAC should be maintained for 2 min. after the last discharge. F S1 Tr S2 L1 C1 UAC R L2 C2 C3 L3 Cx Ct Ut L4 Oscilloscope 17 Active Flammability The cheesecloth should not catch on fire. C1,2 L1 to 4 Ct Cx F : 1F10% C3 : 0.033F5% 10kV : 1.5mH20% 16A Rod core choke : 3F5% 10kV R : 1002% : Capacitor under test UAC : UR5% : Rated Voltage : Fuse, Rated 10A UR : Voltage applied to Ct Ut Ux 5kV time Test Specimen 45 200T5mm The burning time should not exceed 30 sec. The tissue paper should not ignite. About 8mm 18 Passive Flammability The capacitor under test should be held in the flame in the position that best promotes burning. Each specimen should only be exposed once to the flame. Time of exposure to flame: 30 sec. Length of flame : 121mm Gas burner : Length 35mm min. Inside Dia. 0.50.1mm Outside Dia. 0.9mm max. Gas : Butane gas Purity 95% min. Tissue About 10mm Thick Board * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 71 12 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Type KJMethods for Automotive Specifications and Test Methods Type KJStandard Specifications and Test Continued from the preceding page. No. 19 Item Temperature Cycle High Temperature 20 Exposure (Storage) 21 22 23 Thermal Shock No marked defect Capacitance Change Char. B E Capacitance Change Within 10% Within 20% D.F. Char. B, E Specifications D.F.V5.0% I.R. 3000M min. Dielectric Strength Per Item 6 Capacitance Change Within 20% D.F. Char. B, E Specifications D.F.V5.0% No marked defect except color change of outer coating. Capacitance Change Char. B E Capacitance Change Within 10% Within 20% D.F. Char. B, E Specifications D.F.V5.0% I.R. 3000M min. Appearance No marked defect Capacitance Change Char. B E Capacitance Change Within 10% Within 20% D.F. Char. B, E Specifications D.F.V5.0% I.R. 3000M min. Appearance No marked defect Capacitance Change Char. B E Capacitance Change Within 10% Within 15% Char. B, E Specifications D.F.V5.0% I.R. Temperature (C) -55+0/-3 Room temp. 125+3/-0 Room temp. Time (min) 30 3 30 3 Cycle time: 1000 cycles Set the capacitor for 100012 hrs. at 1503C. Appearance Biased Humidity Step 1 2 3 4 Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* 1000M min. Resistance to Solvents Test Method The capacitor should be subjected to 1000 temperature cycles. I.R. D.F. 12 Specifications Appearance Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* The capacitor should be subjected to 300 cycles. Step 1 2 Temperature (C) -55+0/-3 125+3/-0 Time (min) 30 30 Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* Per MIL-STD-202 Method 215 Solvent 1: 1 part (by volume) of isopropyl alcohol 3 parts (by volume) of mineral spirits Solvent 2: Terpene defluxer Solvent 3: 42 parts (by volume) of water 1 part (by volume) of propylene glycol monomethyl ether 1 part (by volume) of monoethanolomine Apply the rated voltage and DC1.3+0.2/-0V (add 6.8k resistor) at 853C and 80 to 85% humidity for 100012 hrs. Pre-treatment: Capacitor should be stored at 1253C for 1hr., then placed at room condition* for 242 hrs. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* 3000M min. * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 72 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Standard Certified Type KJ for Automotive Specifications and Test Type KJ Specifications Test Methods Methods Continued from the preceding page. 24 Item Specifications Appearance No marked defect Capacitance Change Char. B E Capacitance Change Within 10% Within 20% D.F. Char. B, E Specifications D.F.V5.0% Moisture Resistance I.R. 3000M min. Test Method Apply 24 hrs. of heat (25 to 65C) and humidity (80 to 98%) treatment shown below, 10 consecutive times. Pre-treatment: Capacitor should be stored at 1253C for 1 hr., then placed at room condition* for 242 hrs. Post-treatment: Capacitor should be stored for 242 hrs. at room condition.* C 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 -5 -10 Humidity 90-98% Temperature No. Humidity Humidity Humidity 80-98% 90-98% 80-98% Humidity 90-98% +10 -2 C Initial measurement One cycle 24 hours 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Hours * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 12 73 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Safety Certified Ceramic Capacitors for Automotive Characteristics Data (Typical Example) Capacitance - Temperature Characteristics Insertion Loss - Frequency Characteristics 40 0 Type KJ 20 Signal power: 1mW AC240V(r.m.s.) / 60Hz is applied on the capacitor. 10 B Insertion Loss (dB) Cap. Change (%) 0 B -20 -40 E (1) 100pF (2) 220pF (3) 470pF (4) 1000pF (5) 2200pF (6) 4700pF 20 (3) 30 (2) (1) (4) -60 (5) 40 E (6) -80 50 -100 -40 1 -20 0 20 40 60 80 100 120 10 140 100 1000 Frequency (MHz) Temperature (C) Leakage Current Characteristics Type KJ (B char.) Type KJ (E char.) AC voltage : 60Hz Temperature : 25C AC voltage : 60Hz Temperature : 25C 1.0 4.0 470pF 0.8 0.6 220pF 0.4 0.2 100pF 0 1000 2000 AC voltage [V(r.m.s.)] 74 3.0 2.0 2200pF 1.0 1000pF 0.0 0.0 12 Leakage current [mA(r.m.s.)] Leakage current [mA(r.m.s.)] 4700pF 3000 4000 0 1000 2000 AC voltage [V(r.m.s.)] 3000 4000 Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Ceramic Capacitors for Automotive Packaging Taping Specifications 15mm pitch / lead spacing 7.5mm taping Vertical crimp type (Lead Code: N3) P S D h1 O h2 e P2 od W H0 W1 W0 L F W2 P1 T max. Marked side 3.0 max. P0 R oD0 H0 t2 Item t1 Code N3 Pitch of component P 15.02.0 Pitch of sprocket hole P0 15.00.3 Lead spacing F 7.51.0 Length from hole center to component center P2 7.51.5 Length from hole center to lead P1 3.751.0 Body diameter D See the individual product specifications. Deviation along tape, left or right S 02.0 Carrier tape width W 18.00.5 Position of sprocket hole W1 9.00.5 Lead distance between reference and bottom planes H0 18.0 +2.0 -0 r +0.5 to -1.0 Protrusion length Diameter of sprocket hole oD0 4.00.1 Lead diameter od 0.60.05 Total tape thickness t1 0.60.3 Total thickness, tape and lead wire t2 1.5 max. Body thickness T 7.0 max. Portion to cut in case of defect L 11.0 +0 -1.0 Hold down tape width W0 11.5 min. Hold down tape position W2 1.51.5 e Up to the end of crimp Coating extension on lead Deviation across tape, front h1 Deviation across tape, rear h2 2.0 max. (in mm) 12 Minimum Quantity (Order in Sets Only) Packaging Styles Bulk Polyethylene Bag Taping Ammo Pack [Bulk] (pcs./Bag) Lead Code A3 Lead Code B3 Long Short 7 to 10 250 500 12 200 250 Body Dia. D (mm) [Taping] Lead Code: N3 700pcs./Ammo Pack 75 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Certified Ceramic Capacitors for Automotive !Caution !Caution (Rating) 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p that contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. Voltage Positional Measurement DC Voltage V0-p DC+AC Voltage V0-p AC Voltage Vp-p Pulse Voltage (1) Vp-p Pulse Voltage (2) Vp-p 2. Operating Temperature and Self-generated Heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may have self-generated heat due to dielectric loss. Applied voltage load should be such that self-generated heat is within 20C under the condition where the capacitor is subjected to an atmospheric temperature of 25C. When measuring, use a thermocouple of small thermal capacity-K of o0.1mm under conditions where the capacitor is not affected by radiant heat from other components or wind from surroundings. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) 12 3. Test Condition for Withstanding Voltage (1) Test Equipment Test equipment for AC withstanding voltage should be used with the performance of the wave similar to 50/60Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. Continued on the following page. 76 C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Ceramic Capacitors for Automotive !Caution Continued from the preceding page. (2) Voltage Applied Method When the withstanding voltage is applied, the capacitor's lead or terminal should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage without the raise from near zero voltage would be applied directly to capacitor, test voltage should be applied with the zero cross.* At the end of the test time, the test voltage should be reduced to near zero, and then capacitor's lead or terminal should be taken off the output of the withstanding voltage test equipment. If the test voltage without the raise from near zero voltage would be applied directly to capacitor, the surge voltage may rise, and therefore, a defect may be caused. *ZERO CROSS is the point where voltage sine wave passes 0V. See the figure at right. Voltage sine wave 0V zero cross 4. Fail-Safe When the capacitor is broken, failure may result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fuming. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 12 77 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Certified Ceramic Capacitors for Automotive !Caution !Caution (Storage and Operating Condition) Operating and Storage Environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to moisture. Before cleaning, bonding, or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed -10 to 40 degrees centigrade and 15 to 85%. Use capacitors within 6 months after delivery. Check the solderability after 6 months or more. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. !Caution (Soldering and Mounting) 12 1. Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. Please confirm there is no influence of holding measures on the product with the intended equipment. 2. Soldering When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specifications of the capacitor. Subjecting this product to excessive heating could melt the internal junction solder and may result in thermal shocks that can crack the ceramic element. Soldering the capacitor with a soldering iron should be performed in the following conditions. Temperature of iron-tip: 400 degrees C. max. Soldering iron wattage: 50W max. Soldering time: 3.5 sec. max. 3. Bonding, Resin Molding and Coating For bonding, molding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the performance of the bonded, molded or coated product in the intended equipment. When the amount of applications, dryness/hardening conditions of adhesives and molding resins containing organic solvents (ethyl acetate, methyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is damaged by the organic solvents and it may result, worst case, in a short circuit. The variation in thickness of adhesive, molding resin or coating may cause outer coating resin cracking and/or ceramic element cracking of a capacitor in a temperature cycling. 4. Treatment after Bonding, Resin Molding and Coating When the outer coating is hot (over 100 degrees C.) after soldering, it becomes soft and fragile. Therefore, please be careful not to give it mechanical stress. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. !Caution (Handling) Vibration and Impact Do not expose a capacitor or its lead wires to excessive shock or vibration during use. Excessive shock or vibration may cause fatigue destruction of lead wires mounted on the circuit board. Please take measures to hold a capacitor on the circuit boards by adhesive, molding resin or another coating. 78 Please confirm there is no influence of holding measures on the product with the intended equipment. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. C85E.pdf Jul.13,2011 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C85E.pdf Jul.13,2011 Safety Certified Ceramic Capacitors for Automotive Notice Notice (Soldering and Mounting) Cleaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the following conditions. Rinse bath capacity: Output of 20 watts per liter or less. Rinsing time: 5 min. maximum. Do not vibrate the PCB/PWB directly. Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires. Notice (Rating) 1. Capacitance Change of Capacitors Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a constant time circuit. Please contact us if you need detailed information. 2. Performance Check by Equipment Before using a capacitor, check that there is no problem in the equipment's performance and the specifications. Generally speaking, CLASS 2 ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance. Therefore, the capacitance value may change depending on the operating condition in the equipment. Therefore, be sure to confirm the apparatus performance of receiving influence in the capacitance value change of a capacitor, such as leakage current and noise suppression characteristic. Moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed specific value by the inductance of the circuit. 12 79 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications Manufacturing plants that produce the products in this catalog have obtained the ISO9000 quality system certificate. Plant Applied Standard Izumo Murata Manufacturing Co., Ltd. ISO9001 Murata Electronics (Thailand), Ltd. ISO9001 Taiwan Murata Electronics Co., Ltd. ISO9001 12 80 C85E.pdf Jul.13,2011