A-116
Specifications and dimensions subject to change
www.ck-components.com
A
Pushbutton
Features/Benefits
•IP68 sealed
•10,000,000 life cycle
•Multiple colored caps
•Redundant output available
Typical Applications
•Harsh environments
•Off-Road
•Industrial
•Medical
•Transportation
•Joystick control modules
•Gaming
•Military
Specifications
FUNCTION: Linear output (See chart on next page)
MOUNTING TYPE: Front mount, Rear mount
Mechanical
MECHANICAL TRAVEL: 0.150 (3.81mm)
SHOCK: 60g 11ms sawtooth wave
VIBRATION: 10-500Hz 10g max.
Electrical
SUPPLY VOLTAGE: 5 ± 0.5 VDC
SUPPLY CURRENT: 10mA max.
OUTPUT CURRENT: 1mA max.
OUTPUT VOLTAGE: Programable from 0.5 -4.5V
ESD PROTECTION: 16kV per EIA-545
Materials
CASE / BUSHING: Anodized Aluminum
INSIDE HOUSING: PBT
CAP: PBT
ACTUATOR: PBT
Operating Environment
OPERATING TEMPERATURE: -40˚C to 85˚C
OPERATING LIFE: 10,000,000 cycles
SEALING: IP68S
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, please contact Customer Service.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box.
HP Series
Hall Effect Pushbutton Switch
NEW!
Designation
HP HP Series
PH
Bushing / Mounting Style
1Front mount, 5/8-24 thread
2Rear mount, 5/8-24 thread
3Rear mount, 15/32-32 thread
Cap Style
1ø .625 Dome (front mount only)
2ø .370 Flat
Sensor Configuration
SSingle Output
DDual Output,
Output 2 mirrors Output 1
(see figure 1) Output Voltage Code
1V1= 1.0V, V2= 4.0V
2V1= 4.0V, V2= 1.0V
3V1= 0.5V, V2= 4.5V
4V1= 4.5V, V2= 0.5V
Bushing Finish
1Clear anodize
2Black anodize (STD)
Hardware
0No hardware
1Plated hardware (STD)
2Stainless hardware
Cap Color
1White
2Black (STD)
3Red
4Orange
5Yellow
Termination Style
W12” wire leads, 22 AWG XLPE (26 AWG for Dual Output)
Actuation Force
S2.7lb (12N)
Please contact Customer
Service for additional options.
A-117
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Pushbutton
A
0.150
V1
V2
ACTUATOR TRAVEL (IN)
FIGURE 1: OUTPUT VOLTAGE
GND
OUT
VDD
GND
OUT
VDD
PIN 1-GND 1, BLACK
PIN 2-VDD 1, RED
PIN 3-OUT 1, YELLOW
PIN 4-GND 2, GREEN
PIN 5-VDD 2, PURPLE
PIN 6-OUT 2, BLUE
FIGURE 2- SCHEMATIC
F
n
7.4
DUAL OUTPUT ONLY
OUTPUT VOLTAGE (V)
OUTPUT 2
OUTPUT 1
F
n
7.4
F
n
7.4
F
n
7.4
HP Series
Hall Effect Pushbutton Switch
STANDARD VIEW
Third Angle
Projection
NEW!
.520
[13,21 ]
.625
[15,88 ]
.580
[14,73 ]
.725
[18,42 ]
5/8-24 UNEF
HP11
.250
[ 6,35 ] .370
[ 9,4 ]
.875
[22,23 ]
.187
[ 4,75 ]
.663
[16,84 ]
.875
[ 22,23 ]
.370
[ 9,4 ]
.250
[ 6,35 ]
.419
[10,64 ]
.431
[10,95 ]
HP12
5/8-24 UNEF
HP22
5/8-24 UNEF
HP32
.370
[ 9,4 ]
.250
[ 6,35 ]
.325
[ 8,26 ]
.803
[ 20,4 ]
.620
[15,75 ]
15/32-32 UNS
