Rev: 006 Product Family Data Sheet LM561B - 5630 Middle Power LED Introduction Features Beam Angle: 120 Precondition : JEDEC Level 2a Dimension : 5.6 x 3.0 x 0.8 mm ESD withstand Voltage : up to 5KV [HBM] Applications INDOOR LIGHTING : Ambient Light, LED tube, Down light, LED bulb and Ceiling Light SAMSUNG ELECTRONICS 95, Samsung2-Ro, Giheung-Gu, Yongin-City, Gyeonggi-Do 446-711, KOREA http://www.samsungled.com 1 / 49 Contents 1. Product Code Information ----------------------- 2. Characteristics ----------------------- 10 3. Typical Characteristics Graph ----------------------- 11 4. Outline Drawing & Dimension ----------------------- 17 5. Reliability Test Items & Conditions ----------------------- 18 6. Solder Conditions ----------------------- 19 7. Tape & Reel ----------------------- 20 8. Label Structure ----------------------- 22 9. Packing Structure ----------------------- 23 10. Precaution For Use ----------------------- 26 11. Hazard Substance Analysis Report ----------------------- 29 Revision History http://www.samsungled.com 3 ----------------------- 49 2 / 49 1. Product Code Information 1) Luminous Flux Bins (Ts = 25) Nominal CCT 2700K 3000K 3500K 4000K 5000K 5700K 6500K Sorting Condition lm @65mA Product Code Flux Rank Flux Range (v, lm) SPMWH541MD5WAWS1 S1 24.0 ~ 26.0 SPMWH541MD5WAWS2 S2 26.0 ~ 28.0 SPMWH541MD5WAWS3 S3 28.0 ~ 30.0 SPMWH541MD5WAVS1 S1 24.5 ~ 26.5 SPMWH541MD5WAVS2 S2 26.5 ~ 28.5 SPMWH541MD5WAVS3 S3 28.5 ~ 30.5 SPMWH541MD5WAUS1 S1 25.0 ~ 27.0 SPMWH541MD5WAUS2 S2 27.0 ~ 29.0 SPMWH541MD5WAUS3 S3 29.0 ~ 31.0 SPMWH541MD5WATS1 S1 26.0 ~ 28.0 SPMWH541MD5WATS2 S2 28.0 ~ 30.0 SPMWH541MD5WATS3 S3 30.0 ~ 32.0 SPMWH541MD5WARS1 S1 27.0 ~ 29.0 SPMWH541MD5WARS2 S2 29.0 ~ 31.0 SPMWH541MD5WARS3 S3 31.0 ~ 33.0 SPMWH541MD5WAQS1 S1 26.5 ~ 28.5 SPMWH541MD5WAQS2 S2 28.5 ~ 30.5 SPMWH541MD5WAQS3 S3 30.5 ~ 32.5 SPMWH541MD5WAPS1 S1 26.0 ~ 28.0 SPMWH541MD5WAPS2 S2 28.0 ~ 30.0 SPMWH541MD5WAPS3 S3 30.0 ~ 32.0 Notes: 1)SAMSUNG ELECTRONICS maintains a tolerance of 5% on Luminous Flux measurements. 2)"" (the quantity of PKG on the Reel) can be "T"(2,500pcs) or "1"(10,000pcs). 3)Warm white : "" can be "0"(Whole Bin), "H"(Half Bin) or "M"(Quarter Bin) of the color binning. Cool white : "" can be "0"(Whole Bin) or "M"(Quarter Bin) of the color binning. http://www.samsungled.com 3 / 49 2) Color Bins (Ts = 25) 1) Color Binning Nominal CCT Product Code Color Rank SPMWH541MD5WAW0S1 SPMWH541MD5WAW0S2 W0(Whole bin) SPMWH541MD5WAW0S3 Chromaticity Bins W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG SPMWH541MD5WAWHS1 2700K SPMWH541MD5WAWHS2 WH(Half bin) W5, W6, W7, W8, W9, WA, WB, WC SPMWH541MD5WAWHS3 SPMWH541MD5WAWMS1 SPMWH541MD5WAWMS2 WM(Quarter bin) W6, W7, WA, WB SPMWH541MD5WAWMS3 SPMWH541MD5WAV0S1 SPMWH541MD5WAV0S2 V0(Whole bin) SPMWH541MD5WAV0S3 V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG SPMWH541MD5WAVHS1 3000K SPMWH541MD5WAVHS2 VH(Half bin) V5, V6, V7, V8, V9, VA, VB, VC SPMWH541MD5WAVHS3 SPMWH541MD5WAVMS1 SPMWH541MD5WAVMS2 VM(Quarter bin) V6, V7, VA, VB SPMWH541MD5WAVMS3 SPMWH541MD5WAU0S1 SPMWH541MD5WAU0S2 U0(Whole bin) SPMWH541MD5WAU0S3 U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG SPMWH541MD5WAUHS1 3500K SPMWH541MD5WAUHS2 UH(Half bin) U5, U6, U7, U8, U9, UA, UB, UC SPMWH541MD5WAUHS3 SPMWH541MD5WAUMS1 SPMWH541MD5WAUMS2 UM(Quarter bin) U6, U7, UA, UB SPMWH541MD5WAUMS3 http://www.samsungled.com 4 / 49 1) Color Binning (Continued) Nominal CCT Product Code Color Rank SPMWH541MD5WAT0S1 SPMWH541MD5WAT0S2 T0(Whole bin) SPMWH541MD5WAT0S3 Chromaticity Bins T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG SPMWH541MD5WATHS1 4000K SPMWH541MD5WATHS2 TH(Half bin) T5, T6, T7, T8, T9, TA, TB, TC TM(Quarter bin) T6, T7, TA, TB SPMWH541MD5WATHS3 SPMWH541MD5WATMS1 SPMWH541MD5WATMS2 SPMWH541MD5WATMS3 SPMWH541MD5WAR0S1 SPMWH541MD5WAR0S2 R0(Whole bin) SPMWH541MD5WAR0S3 R1, R2, R3, R4, R5 R6, R7, R8, R9 ,RA 5000K SPMWH541MD5WARMS1 SPMWH541MD5WARMS2 RM(Quarter bin) R1, R2, R3, R4, R5, R6 SPMWH541MD5WARMS3 SPMWH541MD5WAQ0S1 SPMWH541MD5WAQ0S2 Q0(Whole bin) SPMWH541MD5WAQ0S3 Q1, Q2, Q3, Q4, Q5 Q6, Q7, Q8, Q9, QA 5700K SPMWH541MD5WAQMS1 SPMWH541MD5WAQMS2 QM(Quarter bin) Q1, Q2, Q3, Q4, Q5, Q6 SPMWH541MD5WAQMS3 SPMWH541MD5WAP0S1 SPMWH541MD5WAP0S2 P0(Whole bin) SPMWH541MD5WAP0S3 P1, P2, P3, P4, P5 P6, P7, P8, P9, PA 6500K SPMWH541MD5WAPMS1 SPMWH541MD5WAPMS2 PM(Quarter bin) P1, P2, P3, P4, P5, P6 SPMWH541MD5WAPMS3 http://www.samsungled.com 5 / 49 2) Chromaticity Region & Coordinates http://www.samsungled.com 6 / 49 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X W rank (2700K) W1 W2 W3 W4 W5 W6 W7 W8 0.4373 0.3893 0.4418 0.3981 0.4475 CIE Y Region CIE X CIE Y V rank (3000K) 0.4465 0.4071 0.4513 0.4164 0.3994 0.4573 0.4178 0.4242 0.3919 0.4322 0.4096 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4475 0.3994 0.4573 0.4178 0.4532 0.4008 0.4634 0.4193 0.4300 0.3939 0.4385 0.4119 0.4483 0.3919 0.4582 0.4099 0.4259 0.3853 0.4342 0.4028 0.4483 0.3919 0.4582 0.4099 0.4259 0.3853 0.4342 0.4028 0.4532 0.4008 0.4634 0.4193 0.4589 0.4021 0.4695 0.4207 0.4359 0.3960 0.4449 0.4141 0.4538 0.3931 0.4641 0.4112 0.4316 0.3873 0.4403 0.4049 0.4538 0.3931 0.4641 0.4112 0.4316 0.3873 0.4403 0.4049 0.4589 0.4021 0.4695 0.4207 0.4646 0.4034 0.4756 0.4221 0.4418 0.3981 0.4513 0.4164 0.4593 0.3944 0.4700 0.4126 0.4373 0.3893 0.4465 0.4071 0.4418 0.3981 0.4513 0.4164 0.4183 0.3898 0.4259 0.4073 0.4465 0.4071 0.4562 0.4260 0.4523 0.4085 0.4624 0.4274 0.4281 0.4006 0.4364 0.4188 0.4475 0.3994 0.4573 0.4178 0.4242 0.3919 0.4322 0.4096 0.4475 0.3994 0.4573 0.4178 0.4242 0.3919 0.4322 0.4096 0.4523 0.4085 0.4624 0.4274 0.4582 0.4099 0.4687 0.4289 0.4342 0.4028 0.4430 0.4212 0.4532 0.4008 0.4634 0.4193 0.4300 0.3939 0.4385 0.4119 0.4532 0.4008 0.4634 0.4193 0.4300 0.3939 0.4385 0.4119 0.4582 0.4099 0.4687 0.4289 0.4641 0.4112 0.4750 0.4304 0.4403 0.4049 0.4496 0.4236 0.4589 0.4021 0.4695 0.4207 0.4359 0.3960 0.4449 0.4141 0.4589 0.4021 0.4695 0.4207 0.4359 0.3960 0.4449 0.4141 0.4641 0.4112 0.4750 0.4304 0.4700 0.4126 0.4813 0.4319 0.4465 0.4071 0.4562 0.4260 0.4646 0.4034 0.4756 0.4221 0.4418 0.3981 0.4513 0.4164 http://www.samsungled.com W9 WA WB WC WD WE WF WG 0.4147 0.3814 V1 V2 V3 V4 V5 V6 V7 V8 0.4183 0.3898 0.4242 0.3919 0.4300 0.3939 0.4359 0.3960 0.4221 0.3984 0.4281 0.4006 0.4342 0.4028 0.4403 0.4049 0.4221 0.3984 V9 VA VB VC VD VE VF VG 0.4259 0.4073 0.4322 0.4096 0.4385 0.4119 0.4449 0.4141 0.4299 0.4165 0.4364 0.4188 0.4430 0.4212 0.4496 0.4236 7 / 49 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X U rank (3500K) U1 U2 U3 U4 U5 U6 U7 U8 0.3889 0.3690 0.3915 0.3768 0.3981 CIE Y Region CIE X CIE Y T rank (4000K) 0.3941 0.3848 0.3968 0.3930 0.3800 0.4040 0.3966 0.3744 0.3685 0.3782 0.3837 0.3953 0.3720 0.4010 0.3882 0.3686 0.3649 0.3719 0.3797 0.3953 0.3720 0.4010 0.3882 0.3726 0.3612 0.3763 0.3760 0.3981 0.3800 0.4040 0.3966 0.4048 0.3832 0.4113 0.4001 0.3804 0.3721 0.3847 0.3877 0.4017 0.3751 0.4080 0.3916 0.3744 0.3685 0.3782 0.3837 0.4017 0.3751 0.4080 0.3916 0.3783 0.3646 0.3825 0.3798 0.4048 0.3832 0.4113 0.4001 0.4116 0.3865 0.4186 0.4037 0.3863 0.3758 0.3912 0.3917 0.4082 0.3782 0.4150 0.3950 0.3804 0.3721 0.3847 0.3877 0.4082 0.3782 0.4150 0.3950 0.384 0.3887 0.3837 0.4116 0.3865 0.4186 0.4037 0.4183 0.3898 0.4259 0.4073 0.3924 0.3794 0.3978 0.3958 0.4147 0.3814 0.4221 0.3984 0.3863 0.3758 0.3912 0.3917 0.3915 0.3768 0.3968 0.3930 0.3686 0.3649 0.3719 0.3797 0.3941 0.3848 0.3996 0.4015 0.4010 0.3882 0.4071 0.4052 0.3763 0.376 0.3802 0.3916 0.3981 0.3800 0.4040 0.3966 0.3702 0.3722 0.3736 0.3874 0.3981 0.3800 0.4040 0.3966 0.3744 0.3685 0.3782 0.3837 0.4010 0.3882 0.4071 0.4052 0.4080 0.3916 0.4146 0.4089 0.3825 0.3798 0.3869 0.3958 0.4048 0.3832 0.4113 0.4001 0.3763 0.376 0.3802 0.3916 0.4048 0.3832 0.4113 0.4001 0.3804 0.3721 0.3847 0.3877 0.4080 0.3916 0.4146 0.4089 0.4150 0.3950 0.4222 0.4127 0.3887 0.3836 0.3937 0.4001 0.4116 0.3865 0.4186 0.4037 0.3825 0.3798 0.3869 0.3958 0.4116 0.3865 0.4186 0.4037 0.3863 0.3758 0.3912 0.3917 0.4150 0.3950 0.4222 0.4127 0.4221 0.3984 0.4299 0.4165 0.395 0.3875 0.4006 0.4044 0.4183 0.3898 0.4259 0.4073 0.3887 0.3836 0.3937 0.4001 http://www.samsungled.com U9 UA UB UC UD UE UF UG 0.367 T1 T2 T3 T4 T5 T6 T7 T8 0.3578 0.3726 0.3612 0.3783 0.3646 0.3840 0.3681 0.3702 0.3722 T9 TA TB 0.3681 0.3898 0.3716 0.3744 0.3685 0.3804 0.3721 0.3863 0.3758 0.3924 0.3794 TC TD TE TF TG 0.3763 0.376 0.3825 0.3798 0.3887 0.3836 0.395 0.3875 0.3782 0.3837 0.3847 0.3877 0.3912 0.3917 0.3978 0.3958 8 / 49 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region R rank (5000K) R1 R2 R3 R4 R5 0.3366 0.3369 0.3441 0.3428 0.3449 0.3515 0.3369 0.3451 0.3441 0.3428 0.3515 0.3487 0.3527 0.3578 0.3449 CIE X CIE Y Region CIE X CIE Y P rank (6500K) 0.3456 0.3601 0.3539 0.3669 0.3551 0.3760 0.3464 0.3688 0.3055 0.3177 0.3117 0.3393 0.3363 0.3287 0.3145 0.3187 0.3081 0.3049 0.3433 0.3341 0.3441 0.3428 0.3515 0.3366 0.3369 0.3135 0.3256 0.3068 0.3113 0.3369 0.3451 0.3433 0.3341 0.3055 0.3177 0.3154 0.3119 0.3449 0.3515 0.3503 0.3396 0.3456 0.3601 0.3515 0.3487 0.3373 0.3534 0.3441 0.3428 0.3041 0.3240 0.3145 0.3187 0.3449 0.3515 0.3376 0.3616 0.3135 0.3256 0.3028 0.3304 0.3527 0.3578 0.3464 0.3688 0.3539 0.3669 0.3471 0.3775 0.3456 0.3601 0.3379 0.3698 0.3126 0.3324 0.3015 0.3368 0.3373 0.3534 0.3464 0.3688 0.3041 0.3240 0.3117 0.3393 0.3456 0.3601 0.3551 0.3760 0.3126 0.3324 0.3464 0.3688 0.3564 0.3851 0.3376 0.3616 0.3471 0.3775 R6 R7 R8 R9 RA 0.3068 0.3113 P1 P2 P3 P4 P5 0.3145 0.3187 0.3135 0.3256 0.3221 0.3261 0.3216 0.3334 0.3135 0.3256 0.3126 0.3324 0.3216 0.3334 0.3210 0.3408 0.3117 0.3393 0.3028 0.3304 0.3126 0.3324 P6 P7 P8 P9 PA 0.3210 0.3408 0.3205 0.3481 0.3154 0.3119 0.3145 0.3187 0.3226 0.3188 0.3221 0.3261 0.3117 0.3393 0.3107 0.3461 0.3205 0.3481 0.3200 0.3554 0.3107 0.3461 Q rank (5700K) Q1 Q2 Q3 Q4 Q5 0.3222 0.3243 0.3292 0.3461 0.3294 0.3306 0.3293 0.3384 0.3373 0.3534 0.3376 0.3616 0.3217 0.3316 0.3292 0.3539 0.3294 0.3306 0.3227 0.3170 0.3366 0.3369 0.3295 0.3228 0.3369 0.3451 0.3294 0.3306 0.3293 0.3384 0.3222 0.3243 0.3217 0.3316 0.3295 0.3228 0.3293 0.3384 0.3363 0.3287 0.3292 0.3461 0.3366 0.3369 0.3212 0.3389 0.3294 0.3306 0.3293 0.3384 0.3207 0.3462 0.3369 0.3451 0.3292 0.3539 0.3373 0.3534 0.3291 0.3617 0.3292 0.3461 0.3202 0.3535 0.3212 0.3389 0.3292 0.3539 0.3292 0.3461 0.3376 0.3616 0.3292 0.3539 0.3379 0.3698 0.3207 0.3462 0.3291 0.3617 Q6 Q7 Q8 Q9 QA Notes: SAMSUNG ELECTRONICS maintains 0.005 tolerance of Cx, Cy http://www.samsungled.com 9 / 49 2. Characteristics 1) Absolute Maximum Rating Item Operating temperature range Storage temperature range LED junction temperature Forward Current Peak Pulsed Forward Current Thermal resistance Assembly Process Temperature ESD Symbol Top Tstg TJ IF IFP Rth, j-s - Rating -40 ~ +85 -40 ~ +120 110 150 mA 300 mA 16/W 260, < 10sec 5kV Condition Duty 1/10 pulse width 10ms Junction to solder point HBM 2) Electro-optical Characteristi Item Forward Voltage1) (VF) (@65 mA, Ts = 25) Unit V Nominal CCT - 2700K (W) 3000K (V) 3500K (U) Luminous Flux2) (v) (@65 mA, Ts = 25) lm 4000K (T) 5000K (R) 5700K (Q) 6500K (P) Reverse Voltage (@5 mA, Ts = 25) Color Rendering Index3)(Ra) Special CRI4) (R9) Product Code - *WAWS1 *WAWS2 *WAWS3 *WAVS1 *WAVS2 *WAVS3 *WAUS1 *WAUS2 *WAUS3 *WATS1 *WATS2 *WATS3 *WARS1 *WARS2 *WARS3 *WAQS1 *WAQS2 *WAQS3 *WAPS1 *WAPS2 *WAPS3 Rank AZ A1 WA A2 A3 A4 S1 S2 S3 S1 S2 S3 S1 S2 S3 S1 S2 S3 S1 S2 S3 S1 S2 S3 S1 S2 S3 Min Typ Max 2.70 2.80 2.90 3.00 3.10 24.0 26.0 28.0 24.5 26.5 28.5 25.0 27.0 29.0 26.0 28.0 30.0 27.0 29.0 31.0 26.5 28.5 30.5 26.0 28.0 30.0 - 2.80 2.90 3.00 3.10 3.20 26.0 28.0 30.0 26.5 28.5 30.5 27.0 29.0 31.0 28.0 30.0 32.0 29.0 31.0 33.0 28.5 30.5 32.5 28.0 30.0 32.0 V - - - 0.7 - 1.2 - - - 5 - 80 0 - - Notes: 1)~4) SAMSUNG ELECTRONICS maintains a tolerance of VF:0.1 V, v:5 %, Ra :3.0, R9 :6.5 on measurements 5) " * " is Product Code of "SPMWH541MD5" http://www.samsungled.com 10 / 49 3. Typical Characteristics Graph (Ts = 25) 1) Spectrum Distribution [CCT : 2700K & 3000K] [CCT : 3500K & 4000K] http://www.samsungled.com 11 / 49 [CCT : 5000K & 5700K] [CCT : 6500K] http://www.samsungled.com 12 / 49 2) Forward Current Characteristics [Relative Luminous Flux vs. Forward Current] (Ts = 25) [Forward Current vs. Forward Voltage] (Ts = 25) http://www.samsungled.com 13 / 49 3) Temperature Characteristics [Relative Luminous Flux vs. Ts] (IF = 65mA) [Forward Voltage vs. Ts] (IF = 65mA) http://www.samsungled.com 14 / 49 4) Color shift Characteristics [Color x, y vs. Forward Current] [Color x, y vs. Ts] http://www.samsungled.com (Ts = 25) (IF = 65mA) 15 / 49 5) Derating Curve 6) Beam Angle Characteristics http://www.samsungled.com 16 / 49 4. Outline Drawing & Dimension 1. Tolerance is 0.10 mm 2. The maximum compressing force is 15N on the body 3. Do not place pressure on the encapsulation resin Top View Left Side View Anode Mark Bottom View Cathode Anode Front View Recommended Land Pattern Notes: 1) This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s). 2) Ts point & measurement method Measure the nearest point to the thermal pad. If necessary, remove PSR of PCB to reach Ts point. Thermal pad must be soldered to the PCB to dissipate heat properly. Otherwise, LED can be damaged. 3) Precautions The pressure on the LEDs will influence to the reliability of the LEDs. Precautions should be taken to avoid the strong pressure on the LEDs. Do not put stress on the LEDs during heating. Re-soldering should not be done after the LEDs have been soldered. If re-soldering is unavoidable, LEDs characteristics should be carefully checked before and after such repair. Do not stack assembled PCBs together. Since materials of LEDs is soft, abrasion between two PCB assembled with LED might cause catastrophic failure of the LEDs. http://www.samsungled.com 17 / 49 5. Reliability Test Items and Conditions 1) Test Items Test Item Test Conditions Test Hours/Cycles Sample No MSL Test 125 24hrs drying 60 , 60 %RH 120hrs 260 10sec 3 cycles 1 cycle 11 Room Temperature life test 25 3 , DC150 1,000 hrs 22 High Temperature life test 85 3 , DC150 1,000 hrs 22 High Temperature humidity life test 85 3 , 85 %2 %RH, DC150 1,000 hrs 22 Low Temperature life test -40 3 , DC150 1,000 hrs 22 Powered Temperature Cycle test -45/20 min 85/20 min, Sweep 100min cycle on/off: each 5 min, DC 150mA 100 cycle 22 Thermal Shock -45 /15 min 125 /15 min Hot plate 180 500 cycle 100 High Temperature Storage Ta=120 3 1000 hrs 11 Low Temperature Storage Ta=-40 3 1000 hrs 11 ESD(HBM) R1:10 , R2:1.5 , C:100 , V = 5 kV 5 times 5 ESD(MM) R1:10 , R2: 0, C:200 , V = 0.5 kV 5 times 5 Vibration Test 20~2000~20 Hz 200 m/s2, Sweep 4 min X, Y, Z 3 direction, each 1 cycle 4 cycles 11 Mechanical Shock Test 1500G, 0.5 ms, 3 shocks each X-Y-Z axis 5 cycles 11 2) Criteria for Judging the Damage Item Symbol Limit Test Condition Min Max Forward Voltage VF IF = 65 Init. Value*0.9 Init. Value*1.1 Luminous Flux v IF = 65 Init. Value*0.7 Init. Value*1.2 http://www.samsungled.com 18 / 49 6. Solder Conditions 1) Reflow Conditions ( Pb Free ) Reflow Frequency : 2 times max. 2) For Manual Soldering Not more than 5 seconds @Max. 300, under soldering iron. http://www.samsungled.com 19 / 49 7. Tape & Reel 1) Taping Dimension (unit : mm) Anode Mark (Cutting side) Tapping Diretion Start End More than 500 Mounted with More than 100~200 Leading part more than Unloaded tape LED package Unloaded tape 500 http://www.samsungled.com 20 / 49 2-1) Reel Dimension (max 2,500 pcs) 2-2) Reel Dimension (max 10,000 pcs) Symbol A B C W1 W2 Spec(mm) O3301 801 130.5 130.3 17.51 (1) Quantity : The quantity/Reel to be 2,500 pcs or 10,000 pcs, . (2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be 0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data code no. and quantity to be indicated on a damp proof Package. http://www.samsungled.com 21 / 49 8. Label Structure 1) Label Structure A11S1 SPMWHT541MD5WA0S1 A11S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Rank Code N.B) Denoted rank is the only example. '' means All kind of Chromaticity Coordinate Rank. Rank Code : Forward Voltage(VF) Rank (refer to page. 11) : Chromaticity Coordinate Rank (refer to page. 4~10) : Luminous Flux(v, lm) Rank (refer to page. 3) 2) LOT Number The Lot number is composed of the following characters A11S1 SPMWHT541MD5WA0S1 A11S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII / 1 / 2,500 or 10,000 PCS : Production Site (S:SAMSUNG ELECTRONICS, G:TIAJIN CHINA) : L (LED) : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample) : Year (V:2011, W:2012, X:2013...) : Month (1 ~ 9, A, B) : Day (1 ~ 9, A, B ~ V) : SAMSUNG ELECTRONICS LED Product number (1 ~ 999) : Reel Number (1 ~ 999) http://www.samsungled.com 22 / 49 9. Packing Structure 1-1) Packing Process (The quantity of PKG on the Reel to be Max 2,500 pcs) Reel A11S1 SPMWHT541MD5WA0S1 A11S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII LEVEL 2a Aluminum Vinyl Bag A11S1 SPMWHT541MD5WA0S1 A11S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Material : Paper(SW3B(B)) TYPE SIZE(mm) L W H 7inch 2455 2205 1825 SIDE H A11S1 CHIP LED SPMWHT541MD5WA0S1 A11S1 01 W IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 25,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII http://www.samsungled.com L 23 / 49 1-2) Packing Process (The quantity of PKG on the Reel to be Max 10,000 pcs) Reel A11S1 SPMWH1541MD5WA0S1 A11S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 10,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII LEVEL 2a Aluminum Vinyl Bag A11S1 SPMWH1541MD5WA0S1 A11S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 10,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII A11S1 SPMWH1541MD5WA0S1 A11S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 150,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII [Box Label] Box Inner SIZE(mm) L W 3405 3705 H 805 Outer 3455 3785 4055 http://www.samsungled.com 24 / 49 2) Aluminum Packing Bag A11S1 SPMWHT541MD5WA0S1 A11S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag http://www.samsungled.com 25 / 49 10. Precaution for use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. . 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. , , , IPA . 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. LED , . 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from Samsung Electronics, they should be packed by a sealed container with nitrogen gas injected.(Shelf life of sealed bags: 12 months, temp. ~40, ~90%RH) LED , 3 . ( bag : 12 , ~40, ~90%RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: Bag , reflow . a. Mounted within 672 hours(28 days) at an assembly line with a condition of no more than 30/60%RH, a. 30/60%RH 672(28) . b. Stored at <10%RH. b. 10% . 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. , . http://www.samsungled.com 26 / 49 7) Devices require baking before mounting, if humidity card reading is >60% at 235. 235 60% , baking . 8) Devices must be baked for 1 hour at 605, if baking is required. baking , 605 1 baking . 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. LED , LED . If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. LED , LED . Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. , Turn on , . 10) VOCs (volatile organic compounds) can be generated from adhesives, flux, hardener or organic additives used in luminaires (fixtures). Transparent LED silicone encapsulant is permeable to those chemicals and they may lead a discoloration of encapsualnt when they expose to heat or light. VOCs( ) , Flux, , LED , . This phenomenon can cause a significant loss of light emitted(output) from the luminaires(fixtures). . In order to prevent these problems, we recommend you to know the physical properties of the materials used in luminaires, They must be selected carefully. , . http://www.samsungled.com 27 / 49 11) Risk of Sulfurization (or Tarnishing) The LED from Samsung Electronics uses a silver-plated lead frame and its surface color may change to black(or dark colored) when it is exposed to sulfur(S), chlorine (Cl) or other halogen compound. LED Ag() . (S), (Cl), Ag() ( ) . Sulfurization of lead frame may cause intensity degradation, change of chromaticity coordinates and, in extreme cases, open circuit. It requires caution. (Sulfurization) , LED (Open) . Due to possible sulfurization of lead frame, LED should not be used and stored together with oxidizing substances made of materials in a following list, : Rubber, plain paper, lead solder cream and so on. (Sulfurization) LED , : , , http://www.samsungled.com 28 / 49 11. Hazard Substance Analysis - SGS http://www.samsungled.com 29 / 49 http://www.samsungled.com 30 / 49 http://www.samsungled.com 31 / 49 http://www.samsungled.com 32 / 49 http://www.samsungled.com 33 / 49 http://www.samsungled.com 34 / 49 11. Hazard Substance Analysis - SVHC(REACH) http://www.samsungled.com 35 / 49 http://www.samsungled.com 36 / 49 http://www.samsungled.com 37 / 49 http://www.samsungled.com 38 / 49 http://www.samsungled.com 39 / 49 http://www.samsungled.com 40 / 49 http://www.samsungled.com 41 / 49 http://www.samsungled.com 42 / 49 http://www.samsungled.com 43 / 49 http://www.samsungled.com 44 / 49 http://www.samsungled.com 45 / 49 http://www.samsungled.com 46 / 49 http://www.samsungled.com 47 / 49 http://www.samsungled.com 48 / 49 Revision History Date No. Revision History 2013.02.08 001 2013.03.06 002 2013.03.25 003 Writer Drawn Approved New version. W.H Jung Y.T KIM Add up Quarter and half of color binning. W.H Jung Y.T KIM C.H. KWON Y.T KIM W.H Jung Y.T KIM W.H Jung Y.T KIM W.H Jung Y.B Yun 1) Change of tapping Q'ty from 2,000 pcs to 2,500 pcs. 2) Change of CIE tolerance x,y:0.005 2013.05.14 004 Add up a mark of UL certification. 1) Add up ErP(Energy-related Products) of the Energy regulation. 2013.06.25 005 2) Change of Graph on Color shift Characteristics 2013.11.09 006 1) Deletes ErP(Energy-related Products) codes in the product data sheet. http://www.samsungled.com 49 / 49