www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.026/02/13
Surface Mount Rectifier
Features:
• Low Cost
• Low Leakage
• Low Forward Voltage Drop
• High Current Capability
• Easily Cleaned With Alcohol,Isopropanol And Similar Solvents
Maximum Ratings and Electrical Characteristics:
Ratings at 25°C ambient temperature unless otherwise specied.
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load,derate by 20%.
Characteristics Symbol MURS120-13-F Units
Maximum recurrent peak reverse voltage VRRM 200 V
Maximum RMS voltage VRMS 140 V
Maximum DC blocking voltage V DC 200 V
Maximum average forward at TL=150°C
Rectied current at TA=125°C IF(AV) 1
2A
Peak forward surge current 8.3ms single half-sine-wave
superimposed on rated load at TJ=125°C IFSM 40 A
Typical reverse recovery time (Note 1) trr 25 ns
Maximum reverse current at TA=25°C
at rated DC blocking voltage at TA=125°C IR2
50 µA
Maximum instantaneous forward at TJ=25°C
Voltage at 1A at TJ=150°C VF0.875
0.71 V
Typical thermal resistance (Note 2) RθJA 13 °C/W
Operating / Storage junction temperature range TJ, TSTG -65 to +175 °C
Mechanical Data:
• Case : JEDEC DO-214AA, molded plastic
• Terminals : Solderable per MIL-STD-202, Method 208
• Polarity : Colour band denotes cathode
• Weight : 0.003oz, 0.093g
• Mounting position : Any
Note:
(1) Measured with IF=0.5A, IR=1A, Irr=0.25A.
(2) Junction to ambient.