G4 Digital AC Output Modules Features G4OAC5A and G4OAC5AMA Modules Description Opto 22's G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero current turn-off. All AC output modules are equivalent to single-pole, single-throw, normally open contacts (Form A, SPST-NO) except the G4OAC5A5, which is equivalent to a single-pole, single-throw, normally closed contact (Form B, SPST-NC). Each module is equipped with a 4 amp fast-blow fuse. The fuse breaking capacity is 40 amps at 250 VAC. Current should be limited to prevent the short circuit current from exceeding the rated breaking capacity of the fuse. The G4OAC5MA and the G4OAC5AMA are special modules featuring a manual-on/manual-off/automatic switch, ideal for diagnostic testing of control applications. Typical applications for AC output modules include switching loads such as AC relays, solenoids, motor starters, heaters, lamps, and indicators. Part Numbers Part Description G4OAC5FM G4 AC Output 12-140 VAC, 5 VDC Logic, Factory Mutual Approved G4OAC5A G4 AC Output 24-280 VAC, 5 VDC Logic G4OAC5AFM G4 AC Output 24-280 VAC, 5 VDC Logic, Factory Mutual Approved G4OAC5A5 G4 AC Output 24-280 VAC, 5 VDC Logic NC G4OAC5A5FM G4 AC Output 24-280 VAC, 5 VDC Logic NC, Factory Mutual Approved G4OAC5MA G4 AC Output 12-140 VAC, 5 VDC Logic With Manual/Auto Switch G4OAC5AMA G4 AC Output 24-280 VAC, 5 VDC Logic With Manual/Auto Switch G4OAC15 G4 AC Output 12-140 VAC, 15 VDC Logic G4OAC15A G4 AC Output 24-280 VAC, 15 VDC Logic G4OAC24 G4 AC Output 12-140 VAC, 24 VDC Logic G4OAC24A G4 AC Output 24-280 VAC, 24 VDC Logic Part numbers ending in FM are Factory Mutual approved. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET G4 AC Output 12-140 VAC, 5 VDC Logic Form 0252-130503 G4OAC5 G4 Digital AC Output Modules 4000 volts optical isolation (transient) Built-in LED status indicator Logic levels of 5, 15, and 24 VDC Removable fuse Current rating: 3 amps at 45 C UL Motor Load rating: 1.5 amps Ability to withstand one-cycle surge of 80 amps Operating temperature: -30 C to 70 C PAGE 1 G4 Digital AC Output Modules Specifications G4 Digital AC Output Modules Units G4OAC5MA G4OAC5AMA VAC 120 120/240 120/240 120 120/240 VAC 12-140 24-280 24-280 12-140 24-280 Key feature -- -- -- Normally closed Diagnostic switch Diagnostic switch Current rating: At 45 C ambient At 70 C ambient A A 3 2 3 2 3 2 3 2 3 2 UL Motor Load Rating A 1.5 1.5 1.5 1.5 1.5 4000 1500 4000 1500 4000 1500 4000 1500 4000 1500 5 1.25/2.5 1.25/2.5 5 1.25/2.5 Isolation input-tooutput (transient): 1 ms 1 minute Off-state leakage at nominal voltage (60 Hz) volts mARMS Nominal logic voltage VDC 5 5 5 5 5 Logic voltage range VDC 4-8 4-8 4-8 4-8 4-8 Logic pickup voltage VDC 4 4 4 4 4 Logic dropout voltage VDC 1 1 1 1 1 Logic input current at nominal logic voltage mA 12 12 12 12 12 ohms 220 220 220 220 220 A peak 80 80 80 80 80 milliseconds 8.3** 8.3*** 8.3** 8.3*** 8.3** 8.3*** 8.3** 8.3*** 8.3** 8.3*** VAC 500 500 500 500 500 Turn-on time @ 60 Hz milliseconds Turn-off time @ 60 Hz Peak repetitive voltage Minimum load current mA 20 20 20 20 20 Output voltage drop maximum peak V 1.6 1.6 1.6 1.6 1.6 Operating frequency Hz 25-65 25-65 25-65 25-65 25-65 V/microseconds 200 200 200 200 200 dV/dT-commutating -- snubbed for 0.5 power factor load snubbed for 0.5 power factor load snubbed for 0.5 power factor load snubbed for 0.5 power factor load snubbed for 0.5 power factor load Temperature Operating: Storage: C C -30 to +70 -30 to +85 -30 to +70 -30 to +85 -30 to +70 -30 to +85 -30 to +70 -30 to +85 -30 to +70 -30 to +85 dV/dT-off-state DATA SHEET G4OAC5A5 G4OAC5A5FM* Output voltage range One-cycle surge Form 0252-130503 G4OAC5A G4OAC5AFM* Nominal line voltage Control resistance (Rc in schematic) PAGE 2 G4OAC5 G4OAC5FM* * Part numbers ending in FM are Factory Mutual approved. ** One-half cycle maximum. Module turns on at the zero volt crossing of the AC sine wave. *** One-half cycle maximum. Module turns off at the zero current crossing of the AC sine wave. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. G4 Digital AC Output Modules Specifications (cont.) G4OAC15*** G4OAC15A*** G4OAC24*** G4OAC24A*** Nominal line voltage VAC 120 120/240 120 120/240 Output voltage range VAC 12-140 24-280 12-140 24-280 Key feature -- -- -- -- -- Current rating: At 45 C ambient At 70 C ambient A A 3 2 3 2 3 2 3 2 UL Motor Load Rating A 1.5 1.5 1.5 1.5 volts 4000 1500 4000 1500 4000 1500 4000 1500 mARMS 5 1.25/2.5 5 1.25/2.5 Logic voltage range VDC 10.5-16 10.5-16 19.5-32 19.5-32 Logic pickup voltage VDC 10.5 10.5 19.5 19.5 Logic dropout voltage VDC 1 1 1 1 mA 15 15 18 18 ohms 1K 1K 2.2 K 2.2 K One-cycle surge A peak 80 80 80 80 Turn-on time @ 60 Hz microseconds 8.3* 8.3* 8.3* 8.3* Turn-off time @ 60 Hz microseconds 8.3** 8.3** 8.3** 8.3** Peak repetitive voltage VAC 500 500 500 500 Minimum load current mA 20 20 20 20 V 1.6 1.6 1.6 1.6 Isolation input-to-output (transient): 1 ms 1 minute Off-state leakage at nominal voltage (60 Hz) Logic input current at nominal logic voltage Control resistance (Rc in schematic) Output voltage drop maximum peak Operating frequency Hz 25-65 25-65 25-65 25-65 V/microsecond 200 200 200 200 dV/dT-commutating -- snubbed for 0.5 power factor load snubbed for 0.5 power factor load snubbed for 0.5 power factor load snubbed for 0.5 power factor load Temperature Operating: Storage: C C -30 to +70 -30 to +85 -30 to +70 -30 to +85 -30 to +70 -30 to +85 -30 to +70 -30 to +85 dV/dT-off-state G4 Digital AC Output Modules Units * One-half cycle maximum. Module turns on at the zero volt crossing of the AC sine wave. ** One-half cycle maximum. Module turns off at the zero current crossing of the AC sine wave. *** Not for use with Opto 22 brains. Form 0252-130503 DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PAGE 3 G4 Digital AC Output Modules DATA SHEET Schematics Form 0252-130503 G4 Digital AC Output Modules Dimensions PAGE 4 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. More About Opto 22 Products Opto 22 develops and manufactures reliable, flexible, easy-touse hardware and software products for industrial automation, energy management, remote monitoring, and data acquisition applications. OptoEMU Energy Management System The easy-to-use OptoEMU Sensor monitors electrical energy use in your facility and delivers detailed, real-time data you can see, analyze, and use in building and control systems. The Sensor can monitor energy data from pulsing meters, electrical panels or subpanels, and equipment. View energy data online using a software service or incorporate the data into your control system for complete energy management. SNAP PAC System Designed to simplify the typically complex process of selecting and applying an automation system, the SNAP PAC System consists of four integrated components: * SNAP PAC controllers * PAC ProjectTM Software Suite * SNAP PAC brains * SNAP I/OTM SNAP PAC Controllers Programmable automation controllers (PACs) are multifunctional, modular controllers based on open standards. Opto 22 has been manufacturing PACs for over two decades. The standalone SNAP PAC S-series, the rack-mounted SNAP PAC R-series, and the software-based SoftPACTM all handle a wide range of digital, analog, and serial functions for data collection, remote monitoring, process control, and discrete and hybrid manufacturing. SNAP PACs are based on open Ethernet and Internet Protocol (IP) standards, so you can build or extend a system easily, without the expense and limitations of proprietary networks and protocols. Wired+WirelessTM models are also available. PAC Project Software Suite Opto 22's PAC Project Software Suite provides full-featured, cost-effective control programming, HMI (human machine interface) development and runtime, OPC server, and database connectivity software for your SNAP PAC System. Control programming includes both easy-to-learn flowcharts and optional scripting. Commands are in plain English; variables and I/O point names are fully descriptive. PAC Project Basic offers control and HMI tools and is free for download on our website, www.opto22.com. PAC Project Professional, available for separate purchase, adds one SoftPAC, OptoOPCServer, OptoDataLink, options for controller redundancy or segmented networking, and support for legacy Opto 22 serial misticTM I/O units. SNAP PAC Brains While SNAP PAC controllers provide central control and data distribution, SNAP PAC brains provide distributed intelligence for I/O processing and communications. Brains offer analog, digital, and serial functions, including thermocouple linearization; PID loop control; and optional high-speed digital counting (up to 20 kHz), quadrature counting, TPO, and pulse generation and measurement. SNAP I/O I/O provides the local connection to sensors and equipment. Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module, depending on the type of module and your needs. Analog, digital, and serial modules are all mixed on the same mounting rack and controlled by the same processor (SNAP PAC brain or rack-mounted controller). Quality Founded in 1974, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula, California. Because we test each product twice before it leaves our factory, rather than only testing a sample of each batch, we can guarantee most solid-state relays and optically isolated I/O modules for life. Free Product Support Opto 22's California-based Product Support Group offers free, comprehensive technical support for Opto 22 products. Our staff of support engineers represents decades of training and experience. Support is available in English and Spanish by phone or email, Monday-Friday, 7 a.m. to 5 p.m. PST. Additional support is always available on our website: how-to videos, OptoKnowledgeBase, self-training guide, troubleshooting and user's guides, and OptoForums. In addition, hands-on training is available for free at our Temecula, California headquarters, and you can register online. Purchasing Opto 22 Products Opto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-3216786 or 951-695-3000, or visit our website at www.opto22.com. www.opto22.com www.opto22.com * Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * Form 1335-121210 SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.