3D-1
Termination Boards Selection Guide
100-pin or 50-pin SCSI-type Connectors
DIN-96DI
(Includes ACL-102100)
50-pin Ribbon Connectors
20-pin Header Connectors
37-pin D-type Connectors
3E-2 3E-2 3E-3 3E-3 3E-3
DIN-96DO
(Includes ACL-102100)
DIN-100S
(Includes ACL-102100)
DIN-50S
(Includes ACL-10250) DIN-502S
ACLD-9182A
(Includes ACL-10120-1)
ACLD-9185
(Includes ACL-10120-1)
ACLD-9188
(Includes 2 ACL-10120-1)
ACLD-9178
(Includes 2 ACL-10120-1) DIN-20P
DIN-37D
ACLD-9188
(Includes 2 ACL-10120-1)
ACLD-8125
(Includes ACL-10137-1)
ACLD-9138
(Includes ACL-10237-1)
ACLD-9137 (male)
ACLD-9137F (female)
DIN-24G or TB-24G
( for Grayhill IO modules)
TB-24R
(Includes ACL-10150-1.5)
TB-24P
(Includes ACL-10150-1.5)
TB-16P8R
(Includes ACL-10150-1.5)
TB-24
(Includes ACL-10150-1.5)
DIN-24PDIN-24RDIN-50P
3E-6 3E-4 3E-5 3E-6
3E-63E-53E-43E-3
3E-8 3E-8 3E-7 3E-3
3E-33E-73E-93E-73E-7
3E-7
3D-2
Termination Boards
DIN-96DI
Termination Board with
96-Channel Opto-Isolated Digital Inputs
Features
96 Opto-Isolated digital input channels
For use with PCI-7396
AC or DC polarity-free DI
Screw terminals for easy field wiring
Specifications
Numbers of channel: 96
Opto-isolator: PC3H4
Input impedence: 4.7K Ohms
Input voltage range: 0~24VDC
Input voltage threshold:
• 20VDC for external 24V input
• 8.8VDC for external 12V input
• 1.8VDC for external 5V input
Isolation voltage: 2,500 Vdc
channel-to-ground
Connector: 100-Pin SCSI-type
Dimension:112.7 mm x 225 mm
Operating temp.: 0Ëš ~ 60ËšC
Storage temp.: -20Ëš ~ 80ËšC
Humidity: 5~95%, non-condensing
Power consumption:
• 5V: 48mA(max.) from SCSI cable
• External digital input current:
• 24V: 490mA(max.)
• 12V: 250mA(max.)
• 5V: 102mA(max.)
Ordering Information
DIN-96DI
96 Channel Isolated Digital Input
Terminal Board
(includes 1m ACL-105100-1)
DIN-96DO
Termination Board with
96-Channel Opto-Isolated Digital Outputs
Features
96 Opto-Isolated digital output channels
For use with PCI-7396
On-board relay driver circuitry
Screw terminals for easy field wiring
Specifications
Numbers of channel: 96
Opto-isolator: PC3H7
Output type: Darlingtoin transistors, open
collector up to 35Vdc
Sink current:
• 350mA max.@ 100% duty, one of
transistors device ON
• 370mA @ duty 10% for all transistors
devices ON
• 140mA @ duty 50% for all transistors
devices ON
• 60mA @ duty 100% for all transistors
devices ON
Isolation voltage: 2500 Vrms
Dimensions: 112.7 mm x 225.0 mm
Operating temp.: 0ËšC ~ 60ËšC
Storage temp.: -20Ëš~ 80ËšC
Power consumption:
5V: 102mA(max.) from cable
Ordering Information
DIN-96DO
96 Channel Isolated Digital Input
Terminal Board(includes 1m ACL-105100-1)
3D-3
Termination Boards
DIN Rail Screw Terminal Boards
Features
General
Universal screw terminal boards for easily wiring
DIN socket for easily mounting on DIN-rail
DIN-100S
General purpose termination board for 100-pin
SCSI-II cable
On-board connector type is female 100-pin
Shipped with 1 meter ACL-102100 cable
Dimensions: 157 x 112 x 51 mm3 (WxLxH)
DIN-50S
General purpose termination board for 50-pin
SCSI -II cable
On-board connector type is female 50-pin
Plastic cover for protection of wiring
Shipped with 1 meter ACL-102100 cable
Dimension: 124 x 77 x 50 mm3 (WxLxH)
DIN-502S
Split 100 signals of 100-pin SCSI-II connector to two
DIN-50S sockets
Shipped with 1 meter ACL-10252 cable
DIN-50P
General purpose termination board for 50-pin ribbon
flex cable
Shipped with 1.5 meters ACL-10150-1.5 cable
Dimension: 145 x 77 x 52 mm3 (WxLxH)
DIN-37D
General purpose termination board for D-type 37-pin cable
On-board connector type is female 37-pin
Shipped with 1 meter ACL-10137-1 cable
Dimension: 112 x 77 x 52 mm3 (WxLxH)
DIN-20P
General purpose termination board for 20-pin ribbon
flex cable
Shipped with 1 meters ACL-10120-1 cable
Dimension: 67 x 77 x 51 mm3 (WxLxH)
Ordering Information
DIN-100S
Termination board with 100-pin SCSI-II
con-nector with DIN socket
DIN-50S
Termination board with 50-pin SCSI-II
con-nector with DIN socket
DIN-502S
Two pieces of termination board DIN-50S with
cable
DIN-50P
Termination board with 50-pin ribbon connector
with DIN socket
DIN-37D
Termination board with 37-pin D-type connector
with DIN socket
DIN-20P
Termination board with 20-pin ribbon connector
with DIN socket
DIN-100S
DIN-50S
DIN-502S
DIN-50P
DIN-37D
DIN-20P
DIN-24R/TB-24R
Termination Board
With 24 Relay Outputs
3D-4
Termination Boards
Features
24 single-pole, double-throw (SPDT form C) relays
50-pin Opto-22TM compatible connector
220VDC/250VAC maximum switching voltage
2A DC, AC maximum switching current
On-board relay driver circuitry
LEDs indicate relay status
Screw terminals for easy field wiring
DIN-24R with DIN socket is available for easily mounting
50-pin SCSI-type connector is available for interface
with ND-6058
Introduction
The DIN-24R and TB-24R relay output boards
are designed for industrial control applications.
It contains 24 electro-mechanical SPDT relays
that can be driven by the 24-bit digital output
ports of the PCI-7248, PCI-7296,ACL-7122,
ACL-7124 and PET-48DIO, ND-6058.
Each relay's switching capacity is 60W/120V.
The normally open, normally closed, and
common contacts for each relay are made
available for maximum flexibility.
Specifications
24 Matsushita DS-Relays
Indication display: 24 LEDs
Indication mode:
• logic "1": LED on, relay set
• logic "0": LED off, relay reset
Relay form: Single Pole, Double Throw
(SPDT)
Input terms: Normally open or normally
closed
Relay coil:
Power consumption:
• TB-24R: +5V @ 40mA for each relay is ON
• DIN-24R:
• +5V @ 200mA max.
• +12V @ 33mA for each relay
• 530 mA for all relays on.
Operating temperature: 0Ëš~ 60ËšC
Storage temperature: -20Ëš~ 80ËšC
Operating humidity: 5 ~ 95%, non-
condensing
Dimensions:
• TB-24R: 220 mm x 132 mm
• DIN-24R: 205 mm x 114 mm
Matsushita DS-Relay
High sensitivity, high switching power
UL/CSA recognized
Contact material: Gold-clad silver
Rating (resistive):
• Max. switching power: 60W, 125VA
• Max. switching voltage: 220VDC, 250VAC
• Max. switching current: 2A DC, AC
• Max. carrying current: 3A DC, AC
UL/CSA rating:
• 6A 125V AC
• 6A 10V DC
• 2A 30V DC
Expected life (min. operations):
• Mechanical: 108
• Electrical 2A 30V DC resistive: 5 x 105
• Electrical 1A 30V DC resistive: 2 x 106
Coil (polarized):
• Min. set and reset power: 45mW
• Normal set and reset power: Approx.
90mW
Max. operating speed: 20cpm at rated load
Operating time (at nominal voltage): 3 ms
typical. 10ms max..
Release time (at nominal voltage): 2 ms
typical. 5ms max..
Set time (latching): Approx. 3msec.
Initial breakdown voltage:
• Between open contacts: 500 Vrms
• Between contact and coil: 1,000 Vrms
Initial insulation resistance:
Min. 1,000MΩ
Ordering Information
TB-24R/12
Termination Board with 24 Relay Outputs and
12 Volt Coil
(includes one 1.5meters, 50-pin flat cable)
TB-24R/24
Termination Board with 24 Relay Outputs and
24 Volt Coil
(includes one 1.5meters, 50-pin flat cable)
DIN-24R/24, DIN-24R/12
Termination Board of 24 Relay Outputs and 24
or 12 Volt Coil with DIN Socket
DIN-24R
TB-24R
12V Version 24V Version
Relay model DS1E-S-DC1 DS1E-S-DC2
2V 4V
Nominal voltage 12VDC 24VDC
Min. set and 9.6VDC 19.2VDC
reset voltage
Max. allowable 19.2VDC 38.4VDC
voltage
Coil resistance 1600Ω6400Ω
3D-5
DIN-24P/TB-24P
Termination Board with
24 Opto-isolated Digital Inputs
Features
24 opto-isolated digital input channels
50-pin Opto-22TM compatible connector
50-pin SCSI-type connector available on DIN-24R
to interface with ND-6058
AC or DC polarity-free input, isolated or dry-contact
(without isolation) by jumper selection
Thresholds from 3VDC to 24VDC, adjustable
by changing current-limiting resistors
2500Vrms optical isolation
LEDs indicate input channel status
Jumper selectable for voltage input mode or dry
contact input mode
Screw terminal for easy field wiring
Introduction
The DIN-24P and TB-24P digital input
termination boards feature high-voltage opto-
isolation on all input channels. They provides
24 channels that are accessed through a single
50-pin connector, standard on the NuDAQ
digital I/O boards, such as ACL-7122, ACL-
7124, PET-48DIO, and PCI-7248, PCI-7296
and ND-6058.
Each opto-isolated digital input accepts from
3VDC to 24VDC or 6.3mA to 50mA by
changing a current limiting resistor for logic
high. In addition, opto-isolated inputs provide
isolation between separate channels and
between each input channel of your PC system.
Isolation prevents floating potential and ground
loop problems from damaging the PC.
Specifications
General Information
Numbers of channel: 24
Opto-isolator: 4N35
Input impedance: 1.2K Ohms
or 4.7K Ohms for 24V input version
Isolation voltage: 2500VDC or Peak AC
Input mode: Isolation or dry contact
(non-isolation)
Input electrical characteristics:
• Logic "Low": 0.8V max.
• Logic "High": 3VDC to +24VDC
• Logic input high current:
6.3mA to 50mA
Response time:
• 20 ms without AC filter
• 2.2 ms with AC filter
Dry contact input:
• Internal pull-up voltage supply : +5VDC
• Logic "1": Input Closed
• Logic "0": Input Open
Indication display: 24 LEDs
• Logic "1": LED on
• Logic "0": LED off
Power requirement:
+5V@40mA (max.)
Operating temperature: 0Ëš~ 60ËšC
Storage temperature: -20Ëš~ 80ËšC
Operating humidity:
5 ~ 95%, non-condensing
Dimension:
• TB-24P: 220 mm x 132 mm
• DIN-24P: 205 mm x 114 mm
Ordering Information
TB-24P
24-CH Isolation/Dry contact termination board
(includes one 1.5 meter 50-pin flat cable)
DIN-24P
24-CH Isolation/Dry contact termination board
with DIN socket
(include 1 m cable ACL-10250-1)
DIN-24/P24, TB-24P/24
24V input version of DIN-24P & TB-24P
DIN-24P
TB-24P
Termination Boards
Pin Assignments for 50-pin
connector of TB-24P
3D-6
Termination Boards
TB-16P8R
Termination Board with
16-CH-Isolated DI & 8-CH Relay
Features
16 isolated digital input and 8 SPDT form-C relay output
2500V rms isolation voltage
Maximum 220V DC / 250 V AC switching voltage, 2A DC
switching current
LEDs indicated relay and input status
50-pin male mating connector
Screw terminal for easily filed wiring
Specifications
Number of isolated DI channels: 16
Electronics characteristics of isolated
DI: refer to the TB-24P's specifications
Number of relay output channels: 8
Electronics characteristics of relay:
refer to the TB-24R's specifications
Power requirements:
• +5V@ 40mA (max.)
• +12V@ 100mA (max.)
Operating temperature: 0Ëš ~ 60ËšC
Storage temperature: -20Ëš~ 80ËšC
Operating humility: 5~95%, non-condensing
Dimensions: 220 mm x 132 mm
Ordering Information
TB-16P8R/12
Termination Board with 16 Opto-isolated inputs
& 8 relay outputs and 12 volt relay coils.
(includes one 1.5 meter 50-pin flat cable)
TB-16P8R/24
24V relay coil version
TB-24
General Purpose Termination Board for
DB-37 and Opto-22 Connectors
Connects easily to all 50-pin mating connector or
37-pin D type connector system boards
Breadboard area for customer design
37-pin male D type connector: 2
50-pin male mating connector: 2
Breadboard area: 125 mm x 73 mm
Ordering Information
TB-24
General Purpose Termination Board (Includes one 1.5 meter 50-pin flat cable)
DIN-24G
Termination Board for
24-CH Grayhill I/O Modules
Supports any standard or miniature G5 size modules
Termination board for installing Grayhill I/O modules
At most 24 modules can be installed
Every 8 channels form a group of input or
output channels
Ordering Information
DIN-24G
24-CH Grayhill I/O module Termination Board with DIN socket
3D-7
ACLD Screw Terminal Boards
Features
General
Low cost universal screw terminal board
Blank pads accommodate applications such as break
detection, low-pass filter, current shunt and voltage
attenuator on ACLD-9178, 9188, 9138
Table-top mounting using nylon standoffs
ACLD-9178
40 terminal points for two 20-pin connectors
Reliable screw clamp terminal blocks
Dimension: 102 mm x 114 mm
ACLD-9188
40 terminal points for two 20-pin flat cable connectors or
one DB-37 connectors
Reliable screw clamp terminal blocks
ACLD-9138
One 37-pin DB-37 connector
Blank RC circuits for analog input boards
Reliable screw clamp terminal blocks
ACLD-9137 / ACLD-9137F
ACLD-9137 is with 37-pin DB-37 male connector,
ACLD- 9137F is with female connector
Reliable screw clamp terminal blocks
Termination Boards
ACLD-9178
ACLD-9188
ACLD-9138
ACLD-9137
Ordering Information
ACLD-9178
Screw Termination Board for Two 20-pin
Headers(Includes two 20-pin flat cable ACL-
10120-1)
ACLD-9188
Industrial Termination Board
ACLD-9138
Screw Termination Board for DB-37 Connector
(Includes 1meter cable ACL-10237-1)
ACLD-9137
Screw termination board with male DB-37
Connector
ACLD-9137F
Screw termination board with female DB-37
Connector
Selection Guide of the 20-pin Header ACLD Termination Board
PCI/ISA Cards
ACL-8111/8112/8216/8316/6126/7120
PCI-9111/9112
Accessories
ACL-10120-1/-2
ACL-10220-1/-2 ACLD-9182A/9185/9178/9188
ACLD-9182A
Termination Board with
16-Channel Opto-Isolated Digital Inputs
3D-8
Termination Boards
Features
16 Opto-Isolated digital input channels
For use with 20-pin digital input connector of NuDAQ cards
AC or DC polarity-free digital input
On-board LEDs reflect the input logic status
Screw terminals for easy field wiring
Isolation and dry contact
Specifications
Number of channels: 16
Opto-isolator: 4N35
Input impedence: 1.2K Ohms
Input voltage range: 0~24VDC
Threshold voltage: 1.5VDC
Isolation voltage: 1,000 Vdc channel-to-
channel and channel-to-ground
Input mode: Isolation and Dry Contact
Input Range
Response time: 20msec without AC filter
2.2m sec with AC filter
Connector: 20-Pin flat ribbon cable connector
Screw terminal: #22 to #12 AWG wires
Dimension: 205 mm x 114 mm
Operating temp.: 0Ëš~ 60ËšC
Storage temp.: -20Ëš~ 80ËšC
Humidity: 5~95%, non-condensing
Ordering Information
ACLD-9182A
16 Channel Isolation/Non-Isolation DI Terminal
Board(includes 1m 20-pin flat cable ACL-
10120-1)
ACLD-9185
16-Channel Output Termination Board
Features
16 Single-Pole-Double-Throw (SPDT Form C) Relays
For use with 20-pin digital input connector of NuDAQ cards
LED Indicators to show relay status
On-board relay driver circuitry
Screw terminals for easy field wiring
Specifications
Number of channels: 16
Relay type: SPDT (Form C)
Contact rating:
• AC 120V/0.5A Resistive
• DC 30V/1A Resistive
Breakdown voltage:500VAC 1 min. DC/Peak
AC min.
Relay ON time: 6 msec typical
Relay OFF time: 3 msec typical
Control logic: Input TTL High (5V) relay on
Insulation resistance: 100M Ohms
Life expectancy: > 5 million operations at
full load
Dimension: 205mm x 114cm
Operating temp.: 0Ëš~ 60ËšC
Storage temp.: -20Ëš~ 80ËšC
Humidity: 5~95%, non-condensing
Power consumption:
• +12V:33mA for each relay
• 528 mA for all relays on
• +5V: 200mA maximun
Ordering Information
ACLD-9185
16 Channel Relay Output Terminal Board
(includes 1m 20-pin flat cable ACL-10120-1)
3D-9
ACLD-8125
Termination Board with
Cold-Junction Temperature Sensor
Features
Low cost universal screw terminal board
Blank pads accommodate applications such as break detection,
low-pass filter, current shunt and voltage attenuator
Table-top mounting using nylon standoffs
One DB-37 connector for multi-function DAQ boards
Reliable screw clamp terminal blocks
Specifications
Cold-junction temperature sensor
• LM334 & LM335 generate voltage
proportional to temperature,
• Jumper selectable SE or DI output
• Output to analog input channels #0
• Power from DB-37 Pin-13: +12V
• Calibrated by VR
DB-37 Connector
• Pin1..8: Single-ended voltage input
channel 0~7
• Pin10..17: Single-ended voltage input
channel 8~15 or differential input
channel 0~7
• Analog ground screw terminal for every
analog input channels
• Screw terminal for two analog output and
their reference voltage
• Screw terminal for counter input, output
and gate signals
• Screw terminal for +5V and external
A/D trigger
Dimension: 168 mm x 114 mm
Ordering Information
ACLD-8125
Termination Board with cold-junction
temperature sensor
ACLD-9881
Termination Board of General
Purpose 32-CH Signal Conditioning
Features
Low cost universal screw terminal board
Table-top mounting using nylon standoffs
Pin definition for 32-CH analog input board such as
ACL-8113 and PCI-9113A.
Blank RC-filter pads accommodate applications such as break
detection, low-pass filter, current shunt and voltage attenuator
Industrial type terminal blocks permit heavy-duty and reliable
connection of signals
One 37-pin connector
Specifications
Number of screw terminals: 40
• 32-Screw terminal for AI signal
• 8 Screw terminal for GND
Number of RC-filter pads: 32
Dimension: 221mm x 105cm
Connector: DB-37
Pin definition: The same as ACL-8113 and
PCI-9113A
Pin 9,10,28,29 are grounding pins.
Ordering Information
ACLD-9881
Terminal board for general purpose 32-CH
signal conditioning
Termination Boards
Accesories
3D-10
Termination Boards
ACL-10120-1/-2
20-pin Flat Cable, 1M/2M
ACL-10220-1/-2
20-pin Shielded & Grounded Cable, 1M/2M
ACL-10232
DB-9 RS-232 male-female Cable, 5M
ACL-10137-1/-2
DB-37 Cable, 1M/2M, (male-male)
ACL-10137-1 MF
DB-37 1M male/female Cable(for ACLD-9137)
ACL-10237-1
DB-37 Flat Cable, 1M
ACL-10337
Two 20-pin header to DB-37 PC back panel
ACL-10437
40-pin Header to DB-37 PC back panel
(for ACL-7225, PCI-7200)
ACL-10150-1.5
50-pin Flat Cable, 1.5M
ACL-10250: 50-pin SCSI-II Cable
ACL-102100: 100-pin SCSI-II Cable
ACL-10252
100-pin to 2x50-pin Cable (for DIN-502S)
ACL-10450
50-pin Header to SCSI-II with PC back Panel
ACL-10537
DB-37 Assembly
ACL-10550
50-pin SCSI-II Assembly
ACL-105100
100-pin SCSI-II Assembly
