3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M DIN C-Form Socket
Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series
Multi-pin count socket compatible with VME,
Multibus II, and VXI backpanels
Expanded pin counts
Optional press-t or solder tail termination
Mates with C-form and R-form plugs
Optional retention clip
See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3M.com/Interconnects for compliance
information (RIA E1 & C1 apply)
Date Modied: February 2, 2010 TS-2306-E
Sheet 1 of 3
Physical
Insulation:
Material: Glass Filled Polyester (PBT)
Flammability: UL 94V-0
Color: Gray
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” Min.Nickel
Wiping Area: See Ordering Information
Termination: See Ordering Information
Electrical
Current Rating: 3.0A at 30°C T-rise above Ambient
Contact Resistance: ≤20
Insulation Resistance: ≥1,000 MΩ,100VDC
Withstanding Voltage: 1,000 V
AC for 1 minute
Environmental
Temperature Rating: -55°C to 125°C
Process Temperature Rating: Maximum Insulator Temperature 191°C (solder wave process only)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M DIN C-Form Socket
Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series
TS-2306-E
Sheet 2 of 3
Table 1
Contact
Quantity Part Number A B D E
16 DIN-016CSA-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]
32 DIN-032CSB-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]
48 DIN-048CSC-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]
32 DIN-032CSD-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]
16 DIN-016CSE-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]
32 DIN-032CSA-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]
64 DIN-064CSB-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]
96 DIN-096CSC-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]
64 DIN-064CSD-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]
32 DIN-032CSE-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]
B
11.60
[.457]
8.50
[.335]
2.90
[.114]
A
D
E
1.00
[.039]
0.30
[.012]
2-Ø2.80
[Ø.110]MIN.
5.08
[.200]
10.50
[.413]
5.08
[.200]
2.54
[.100]
C
2.54
[.100]
PRESS-FIT TAILS SOLDER TAILS
POSITION A1
POSITION B1
POSITION C1
C
mm
[inch]
Tolerance Unless Noted
X. .X .XX
mm ± 0.50 ± 0.25 ± 0.15
[ ] Dimension for Reference Only
3.80
(.150)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M DIN C-Form Socket
Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series
TS-2306-E
Sheet 3 of 3
Ordering Information
DIN - XXXCS X - XXX - XX
A = A Row only (see note)
B = Rows A & C Filled
C = Rows A, B & C Filled
D = Rows A & B Filled
E = B Row only (see note)
Termination Options:
SEE TABLE 2
Contact Quantity
SEE TABLE 1
RECOMMENDED PCB LAYOUT
E
D
Ø2.8-2.9
[.110-.114]
2.54
[.100]
5.08
[.200]
0.30
[.012]
Ø0.94-1.09
[.037-.043]
2.54
[.100]
PLATED THROUGH HOLE
2a
c
1
b
Plating Options:
SH = 1 - 3 μ” Gold on Contact
120 - 200 μ” Matte Tin on Terminal
FJ = 10 - 20 μ” Gold on Contact
120 - 200 μ” Matte Tin on Terminal
KR = 30 - 40 μ” Gold on Contact
120 - 200 μ” Matte Tin on Terminal
HM = 3 μ” Gold on Contact, 7 μ” Min. PdNi
120 - 200 μ” Matte Tin on Terminal
KV = 30 μ” Gold on contact area, 1 - 3 μ” Gold
on Board Termination
Table 2
SOLDER TERMINATION OPTION NO. DIM “C” mm (in) Comments
R1L 3.75 (.148) with Retention Clips
R3L 2.29 (.090) with Retention Clips
S1L 3.75 (.148) no Retention Clips
S3L 2.29 (.090) no Retention Clips
W 14.70 (.579) no Retention Clips
PRESS-FIT TERMINATION OPTION NO.
PS 5.99 (.236)
PSL 4.25 (.167)
PW1 12.90 (.508)
Note: A and E options are not currently covered in UL File No. E68080
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com 3M is a trademark of 3M Company.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
3M:
DIN-120CSC-R1L-TG30 DIN-096CSC-S1L-HS DIN-016CSA-R1L-KR DIN-016CSE-R1L-KR DIN-032CSA-R1L-KR
DIN-032CSB-R1L-KR DIN-032CSD-R1L-KR DIN-032CSE-R1L-KR DIN-048CSC-R1L-FJ DIN-064CSD-R1L-KR DIN-
096CSC-W-KV DIN-032CSB-R1L-SH DIN-048CSC-R1L-SH DIN-096CSC-S1L-KV DIN-016CSA-R1L-FJ DIN-
016CSA-R1L-SH DIN-016CSE-R1L-FJ DIN-016CSE-R1L-SH DIN-032CSA-R1L-FJ DIN-032CSA-R1L-HM DIN-
032CSA-R1L-SH DIN-032CSB-R1L-FJ DIN-032CSD-R1L-FJ DIN-032CSD-R1L-SH DIN-032CSE-R1L-FJ DIN-
032CSE-R1L-HM DIN-032CSE-R1L-SH DIN-064CSB-R1L-FJ DIN-064CSB-R1L-SH DIN-064CSD-R1L-FJ DIN-
064CSD-R1L-HM DIN-064CSD-R1L-SH DIN-096CSC-R1L-FJ DIN-096CSC-R1L-SH DIN-120CSC-R1L-HS DIN-
120CSC-R1L-MH DIN-120CSC-S1L-HS DIN-32CSBCES70305-HM DIN-064CSB-R1L-KR DIN-048CSC-PSL-HM
DIN-096CSC-S1L-HM DIN-096CSC-S3L-HM DIN-064CSB-S1L-HM DIN-096CSC-PW1-HM DIN-096CSC-S1L-KR
DIN-096CSC-R1L-HM DIN-096CSC-PSL-HM DIN-016CSA-PS-FJ DIN-016CSA-PS-HM DIN-016CSA-PS-KR DIN-
016CSA-PSL-FJ DIN-016CSA-PSL-HM DIN-016CSA-PSL-KR DIN-016CSA-PSL-SH DIN-016CSA-PS-SH DIN-
016CSA-PW1-FJ DIN-016CSA-PW1-HM DIN-016CSA-PW1-KR DIN-016CSA-PW1-SH DIN-016CSA-R3L-FJ DIN-
016CSA-R3L-HM DIN-016CSA-R3L-KR DIN-016CSA-R3L-SH DIN-016CSA-S1L-FJ DIN-016CSA-S1L-HM DIN-
016CSA-S1L-KR DIN-016CSA-S1L-SH DIN-016CSA-S3L-FJ DIN-016CSA-S3L-HM DIN-016CSA-S3L-KR DIN-
016CSA-S3L-SH DIN-016CSA-W-FJ DIN-016CSA-W-HM DIN-016CSA-W-KR DIN-016CSA-W-SH DIN-016CSE-PS-
FJ DIN-016CSE-PS-HM DIN-016CSE-PS-KR DIN-016CSE-PSL-FJ DIN-016CSE-PSL-HM DIN-016CSE-PSL-KR
DIN-016CSE-PSL-SH DIN-016CSE-PS-SH DIN-016CSE-PW1-FJ DIN-016CSE-PW1-HM DIN-016CSE-PW1-KR
DIN-016CSE-PW1-SH DIN-016CSE-R3L-FJ DIN-016CSE-R3L-HM DIN-016CSE-R3L-KR DIN-016CSE-R3L-SH DIN-
016CSE-S1L-FJ DIN-016CSE-S1L-HM DIN-016CSE-S1L-KR DIN-016CSE-S1L-SH DIN-016CSE-S3L-FJ DIN-
016CSE-S3L-HM DIN-016CSE-S3L-KR DIN-016CSE-S3L-SH DIN-016CSE-W-FJ