LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 D Single-Supply Operation: D D D D D D D DW PACKAGE (TOP VIEW) Input Voltage Range Extends to Ground, and Output Swings to Ground While Sinking Current Input Offset Voltage 300 V Max at 25C for LT1014 Offset Voltage Temperature Coefficient 2.5 V/C Max for LT1014 Input Offset Current 1.5 nA Max at 25C for LT1014 High Gain 1.2 V/V Min (RL = 2 k), 0.5 V/V Min (RL = 600 ) for LT1014 Low Supply Current 2.2 mA Max at 25C for LT 1014 Low Peak-to-Peak Noise Voltage 0.55 V Typ Low Current Noise 0.07 pA/Hz Typ 1OUT 1IN- 1IN+ VCC+ 2IN+ 2IN- 2OUT NC 1OUT 1IN- 1IN+ VCC+ 2IN+ 2IN- 2OUT The LT1014, LT1014A, and LT1014D are quad precision operational amplifiers with 14-pin industry-standard configuration. They feature low offset-voltage temperature coefficient, high gain, low supply current, and low noise. 2 15 3 14 4 13 5 12 6 11 7 10 8 9 4OUT 4IN- 4IN+ VCC-/GND 3IN+ 3IN- 3OUT NC 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN- 4IN+ VCC- 3IN+ 3IN- 3OUT 1IN- 1OUT NC 4OUT 4IN- FK PACKAGE (TOP VIEW) 1IN+ NC VCC+ NC 2IN+ 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4IN+ NC VCC-/GND NC 3IN+ 2IN- 2OUT NC 3OUT 3IN- The LT1014C and LT1014D are characterized for operation from 0C to 70C. The LT1014I and LT1014DI are characterized for operation from -40C to 105C. The LT1014M, LT1014AM and LT1014DM are characterized for operation over the full military temperature range of -55C to 125C. 16 J OR N PACKAGE (TOP VIEW) description The LT1014, LT1014A, and LT1014D can be operated with both dual 15-V and single 5-V power supplies. The common-mode input voltage range includes ground, and the output voltage can also swing to within a few milivolts of ground. Crossover distortion is eliminated. 1 NC - No internal connection Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2009, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 AVAILABLE OPTIONS{ PACKAGED DEVICES} VIO max AT 25C SMALL OUTLINE (DW) CHIP CARRIER (FK) CERAMIC DIP (J) PLASTIC DIP (N) 0C to 70C 300 V 800 V -- LT1014DDW -- -- -- -- LT1014CN LT1014DN -40C 40C to 105C 300 V 800 V -- LT1014DIDW -- -- -- -- LT1014IN LT1014DIN -55C 55 C to 125 125C C 180 V 300 V 800 V -- -- LT1014DMDW LT1014AMFK LT1014MFK -- LT1014AMJ LT1014MJ -- -- LT1014MN LT1014DMN TA For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. The DW package is available taped and reeled. Add the suffix R to the device type (e.g., LT1014DDWR). 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 400 400 Q21 Q1 Q5 Q22 Q2 9 k Q6 Q12 75 pF Q28 Q27 9 k Component values are nominal. VCC- IN+ IN- V CC+ Q9 Q11 Q13 5 k Q7 Q8 5 k Q29 Q4 1.6 k Q16 Q3 1.6 k Q10 10 pF 3.9 k Q14 1.6 k 2 k Q19 2.5 pF Q17 Q18 21 pF Q15 1.3 k Q20 Q32 100 Q25 Q23 Q31 Q26 2 k 10 pF 2 k 4 pF 2.4 k Q30 1 k Q24 Q34 18 Q33 14 k 30 42 k OUT Q35 Q40 Q37 Q38 J1 600 Q39 Q41 Q36 800 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 schematic (each amplifier) 3 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V VCC- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -22 V Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V Input voltage range, VI (any input) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC- - 5 V to VCC+ Duration of short-circuit current at (or below) TA = 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: LT1014C, LT1014D . . . . . . . . . . . . . . . . . . . . . . . . . . . -0C to 70C LT1014I, LT1014DI . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to 105C LT1014M, LT1014AM, LT1014DM . . . . . . . . . . . . . -55C to 125C Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC-. 2. Differential voltages are at the noninverting input with respect to the inverting input. 3. The output may be shorted to either supply. DISSIPATION RATING TABLE 4 PACKAGE TA 25C POWER RATING DW 1025 mV 8.2 mW/C 656 mW 369 mW 205 mW FK 1375 mV 11.0 mW/C 880 mW 495 mW 275 mW J 1375 mV 11.0 mW/C 880 mW 495 mW 275 mW N 1150 mV 9.2 mW/C 736 mW 414 mW 230 mW DERATING FACTOR ABOVE TA = 25C POST OFFICE BOX 655303 TA = 70C POWER RATING * DALLAS, TEXAS 75265 TA = 105C POWER RATING TA = 125C POWER RATING LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 electrical characteristics at specified free-air temperature, VCC = 15 V, VIC = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage aV Temperature coeficient of input offset voltage IO LT1014C TEST CONDITIONS TA Input offset current IIB Input bias current MAX 60 300 Full range Full range 0.4 25C 0.5 25C 0.15 Full range VOM Maximum peak output voltage swing AVD Large-signal L i l diff differential ti l voltage amplification RL = 2 k VO = 10 V, VO = 10 V V, -12 -15 to 13.5 Full range -15 to 13 25C 12.5 Common mode Common-mode rejection ratio kSVR Supply-voltage rejection ratio (VCC/VIO) VCC = 2 V to 18 V Channel separation VO = 10 V, VIC = -15 V to 13 V MAX 800 1000 2.5 0.7 5 1.5 0.15 -12 -15.3 to 13.8 V/C nA -30 -38 -15 to 13.5 V V 1.5 2.8 -30 UNIT V/mo 0.5 -15.3 to 13.8 nA V -15 to 13 14 12.5 14 Full range 12 25C 0.5 2 0.5 2 25C 1.2 8 1.2 8 Full range 0.7 25C 97 Full range 94 25C 100 Full range 97 VIC = -15 V to 13.5 V CMRR 200 -38 25C RL = 600 RL = 2 k TYP 2.8 Full range Common-mode input voltage range MIN 550 25C VICR LT1014D TYP 25C RS = 50 Long-term drift of input offset voltage IIO MIN V 12 V/V 0.7 117 97 117 dB 94 117 100 117 dB RL = 2 k 97 25C 120 137 120 137 dB rid Differential input resistance 25C 70 300 70 300 M ric Common-mode input resistance 25C 4 4 G ICC Supply current per amplifier 25C 0.35 Full range 0.55 0.6 0.35 0.55 0.6 mA Full range is 0C to 70C. All typical values are at TA = 25C. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 electrical characteristics at specified free-air temperature, VCC = 5 V, VCC- = 0, VO = 1.4 V, VIC = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage IIO Input offset current IIB Input bias current VICR Common-mode input voltage range TA TEST CONDITIONS LT1014C MIN MAX 90 450 25C RS = 50 Full range 0.2 25C Output low, RL = 600 to GND M i t t Maximum peakk output voltage swing AVD Large-signal differential voltage amplification ICC Supply current per amplifier 0.2 -50 -15 0 to 3.5 Full range 0 to 3 -0.3 to 3.8 nA -50 -90 0 to 3.5 V V 2 6 -90 25C 950 UNIT -0.3 to 3.8 nA V 0 to 3 25C 15 25 15 25 25C 5 10 5 10 Full range 13 Isink = 1 mA 25C No load 25C 4 4.4 4 4.4 25C 3.4 4 3.4 4 V Full range 3.2 220 350 1 V/V 3.2 25C 1 25C 0.3 Full range 350 mV Output low, VO = 5 mV to 4 V, RL = 500 220 13 Output high, Output high, RL = 600 to GND -15 MAX 1200 6 Full range No load TYP 250 2 Full range Output low, MIN 570 25C VOM LT1014D TYP 0.5 0.3 0.55 0.5 0.55 mA Full range is 0C to 70C. operating characteristics, VCC = 15 V, VIC = 0, TA = 25C PARAMETER SR 6 TEST CONDITIONS Slew rate MIN TYP 0.2 0.4 f = 10 Hz 24 f = 1 kHz 22 MAX UNIT V/s Vn Equivalent input noise voltage VN(PP) Peak-to-peak equivalent input noise voltage f = 0.1 Hz to 10 Hz 0.55 V In Equivalent input noise current f = 10 Hz 0.07 pA/Hz POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 nV/Hz LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 electrical characteristics at specified free-air temperature, VCC = 15 V, VIC = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage aV Temperature coeficient of input offset voltage IO LT1014I TEST CONDITIONS TA Input offset current IIB Input bias current MAX 60 300 Full range Full range 0.4 25C 0.5 25C 0.15 Full range VOM Maximum peak output voltage swing AVD Large-signal L i l diff differential ti l voltage amplification RL = 2 k VO = 10 V, VO = 10 V V, -12 CMRR Common mode Common-mode rejection ratio 15 V to 13 13.5 5V VIC = -15 kSVR Supply-voltage rejection ratio (VCC/VIO) VCC = 2 V to 18 V Channel separation VO = 10 V, 200 -15 to 13.5 Full range -15 to 13 25C 12.5 MAX 800 1000 2.5 0.7 5 1.5 0.15 -12 -15.3 to 13.8 V/C nA -30 -38 -15 to 13.5 V V 1.5 2.8 -30 UNIT V/mo 0.5 -38 25C -15.3 to 13.8 nA V -15 to 13 14 12.5 14 Full range 12 25C 0.5 2 0.5 2 25C 1.2 8 1.2 8 Full range 0.7 25C 97 Full range 94 25C 100 Full range 97 RL = 600 RL = 2 k TYP 2.8 Full range Common-mode input voltage range MIN 550 25C VICR LT1014DI TYP 25C RS = 50 Long-term drift of input offset voltage IIO MIN V 12 V/V 0.7 117 97 117 dB 94 117 100 117 dB RL = 2 k 97 25C 120 137 120 137 dB rid Differential input resistance 25C 70 300 70 300 M ric Common-mode input resistance 25C 4 4 G ICC Supply current per amplifier 25C 0.35 Full range 0.55 0.6 0.35 0.55 0.6 mA Full range is -40C to 105C. All typical values are at TA = 25C. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC- = 0, VO = 1.4 V, VIC = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage IIO Input offset current IIB Input bias current VICR Common-mode input voltage range LT1014I TEST CONDITIONS TA MIN MAX 90 450 25C RS = 50 Full range 0.2 Full range Output low, RL = 600 to GND M i k Maximum peak output voltage swing AVD Large-signal differential voltage amplification ICC Supply current per amplifier 0.2 -50 -15 0 to 3.5 Full range 0 to 3 -0.3 to 3.8 nA -50 -90 0 to 3.5 V V 2 6 -90 25C 950 UNIT -0.3 to 3.8 nA V 0 to 3 25C 15 25 15 25 25C 5 10 5 10 Full range 13 25C Output high, No load 25C 4 4.4 4 4.4 25C 3.4 4 3.4 4 V Full range 3.2 220 350 1 V/V 3.2 25C 1 25C 0.3 Full range 350 mV Isink = 1 mA VO = 5 mV to 4 V, RL = 500 220 13 Output low, Output high, RL = 600 to GND -15 MAX 1200 6 25C No load TYP 250 2 Full range Output low, MIN 570 25C VOM LT1014DI TYP 0.5 0.3 0.55 0.5 0.55 mA Full range is -40C to 105C. operating characteristics, VCC+ = 15 V, VIC = 0, TA = 25C PARAMETER 8 TEST CONDITIONS MIN TYP 0.2 0.4 MAX UNIT SR Slew rate Vn Equivalent input noise voltage VN(PP) Peak-to-peak equivalent input noise voltage f = 0.1 Hz to 10 Hz 0.55 V In Equivalent input noise current f = 10 Hz 0.07 pA/Hz POST OFFICE BOX 655303 f = 10 Hz 24 f = 1 kHz 22 * DALLAS, TEXAS 75265 V/s nV/H nV/Hz LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 electrical characteristics at specified free-air temperature, VCC = 15 V, VIC = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage aV Temperature coefficient of input offset voltage IO TEST CONDITIONS RS = 50 Long-term drift of input offset voltage IIO Input offset current IIB Input bias current VICR Common-mode input voltage range VOM Maximum peak output voltage swing AVD Large-signal differential voltage amplification CMRR kSVR Common mode Common-mode rejection ratio TA LT1014M MIN MAX 60 300 25C Full range Full range 0.5 25C 0.5 25C 0.15 -12 Full range VO = 10 V, RL = 2 k MAX 60 180 -15 to 13.5 Full range -14.9 to 13 25C 12.5 Full range 11.5 MIN 2.5 200 0.5 1.5 0.15 2 0.5 -12 0.8 13 2.5 -12 -15.3 to 13.8 V V V/C 1.5 nA -30 -45 -15 to 13.5 UNIT V/mo 5 -20 -14.9 to 13 14 0.15 -30 -15 to 13.5 800 0.5 2.8 -30 MAX 1000 0.5 -15.3 to 13.8 TYP 350 -45 25C LT1014DM TYP 5 25C VO = 10 V, RL = 600 MIN 550 Full range RL = 2 k LT1014AM TYP -15.3 to 13.8 nA V -14.9 to 13 14 12.5 12 14 V 11.5 25C 0.5 2 0.8 2.2 0.5 2 25C 1.2 8 1.5 8 1.2 8 Full range 0.25 0.4 V/ V V/V 0.25 VIC = -15 V to 13.5 V 25C 97 VIC = -14.9 V to 13 V Full range 94 25C 100 Full range 97 25C 120 137 123 137 120 137 dB 70 300 100 300 70 300 M 4 G Supply-voltage rejection ratio (VCC/VIO) VCC = 2 V to 18 V Channel separation VO = 10 V, RL = 2 k 117 100 117 97 117 dB 96 117 103 94 117 100 117 dB 100 rid Differential input resistance 25C ric Common-mode input resistance 25C 4 ICC Supply current per amplifier 25C 0.35 Full range 97 4 0.55 0.7 0.35 0.50 0.6 0.35 0.55 0.7 mA Full range is -55C to 125C. All typical values are at TA = 25C. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC- = 0, VO = 1.4 V, VIC = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage IIO Input offset current IIB Input bias current VICR Commonmode input voltage range TEST CONDITIONS RS = 50 TA AVD Large-signal differential voltage amplification ICC Supply current per amplifier LT1014AM MAX MIN LT1014DM TYP MAX MIN TYP MAX 25C 90 450 90 280 250 950 400 1500 400 960 800 2000 125C 200 750 200 480 560 1200 25C 0.2 2 0.2 1.3 0.2 2 -15 -50 -15 -35 -15 -50 RS = 50, VIC = 0.1 V Full range 10 25C Full range 25C Full range Output low, RL = 600 to GND Maximum peak output voltage swing TYP Full range Output low, No load VOM LT1014M MIN 7 -120 0 to 3.5 0 to 3.5 0.1 to 3 -0.3 to 3.8 nA -120 0 to 3.5 0.1 to 3 V 10 -90 -0.3 to 3.8 UNIT -0.3 to 3.8 V 0.1 to 3 25C 15 25 15 25 15 25 25C 5 10 5 10 5 10 mV Full range 18 15 18 Output low, Isink = 1 mA 25C Output high, No load 25C 4 4.4 4 4.4 4 4.4 Output high, 25C 3.4 4 3.4 4 3.4 4 V RL = 600 to GND Full range 3.1 1 V/V VO = 5 mV to 4 V, RL = 500 220 220 350 3.2 25C 1 25C 0.3 Full range 350 220 3.1 1 0.5 350 0.3 0.65 0.45 0.3 0.55 0.5 0.65 mA Full range is -55C to 125C. operating characteristics, VCC = 15 V, VIC = 0, TA = 25C PARAMETER SR TEST CONDITIONS Slew rate MIN TYP 0.2 0.4 f = 10 Hz 24 f = 1 kHz 22 MAX UNIT V/s Vn Equivalent input noise voltage VN(PP) Peak-to-peak equivalent input noise voltage f = 0.1 Hz to 10 Hz 0.55 V In Equivalent input noise current f = 10 Hz 0.07 pA/Hz 10 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 nV/H nV/Hz LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO Input offset voltage vs Balanced source resistance 1 VIO Input offset voltage vs Free-air temperature 2 VIO Warm-Up Change in input offset voltage vs Elapsed time 3 IIO Input offset current vs Free-air temperature 4 IIB Input bias current vs Free-air temperature 5 VIC Common-mode input voltage vs Input bias current AVD Differential voltage amplification 6 vs Load resistance 7, 8 vs Frequency 9, 10 Channel separation vs Frequency 11 Output saturation voltage vs Free-air temperature 12 CMRR Common-mode rejection ratio vs Frequency 13 kSVR Supply-voltage rejection ratio vs Frequency 14 ICC Supply current vs Free-air temperature 15 IOS Short-circuit output current vs Elapsed time 16 Vn Equivalent input noise voltage vs Frequency 17 In Equivalent input noise current vs Frequency 17 VN(PP) Peak-to-peak input noise voltage vs Time 18 Pulse response (small signal) vs Time 19, 21 Pulse response (large signal) vs Time 20, 22, 23 Phase shift vs Frequency POST OFFICE BOX 655303 9 * DALLAS, TEXAS 75265 11 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 TYPICAL CHARACTERISTICS INPUT OFFSET VOLTAGE OF REPRESENTATIVE UNITS vs FREE-AIR TEMPERATURE LT1014 INPUT OFFSET VOLTAGE vs BALANCED SOURCE RESISTANCE 250 10 1 VCC = 5 V VCC- = 0 0.1 RS VCC = 15 V 0.01 1k - + 150 100 50 0 -50 -100 -150 -200 RS 3k VCC = 15 V 200 VIO - Input Offset Voltage - V VIO - Input Offset Voltage - mV TA = 25C 10 k 30 k 100 k 300 k 1 M -250 -50 3 M 10 M -25 0 Rs - Source Resistance - Figure 1 I IO - Input Offset Current - nA V IO - Change in Input Offset Votlage - V N Package 1 0.8 0.6 VCC = 2.5 V 0.4 VCC+ = 5 V, VCC- = 0 0.2 J Package 2 3 4 VCC = 15 V 5 0 -50 -25 Figure 3 12 0 25 50 75 100 TA - Free-Air Temperature - C t - Time After Power-On - min 125 VIC = 0 2 1 100 1 3 0 75 INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE VCC = 15 V TA = 25C 4 0 50 Figure 2 WARM-UP CHANGE IN INPUT OFFSET VOLTAGE vs ELAPSED TIME 5 25 TA - Free-Air Temperature - C Figure 4 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 TYPICAL CHARACTERISTICS COMMON-MODE INPUT VOLTAGE vs INPUT BIAS CURRENT INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE -30 5 15 VIC = 0 I IB - Input Bias Current - nA -25 -20 VCC+ = 5 V, VCC- = 0 -15 VCC = 2.5 V -10 VCC = 15 V -5 0 -50 10 4 5 3 VCC = 15 V (Left Scale) 1 -10 0 -15 -25 0 25 50 75 100 0 125 -5 -10 -25 -1 -30 VCC = 15 V VO = 10 V TA = 25C TA = -55C 1 TA = 125C 0.4 1k DIFFERENTIAL VOLTAGE AMPLIFICATION vs LOAD RESISTANCE A VD - Differential Voltage Amplivication - V/ V A VD - Differential Voltage Amplivication - V/ V 10 400 -20 Figure 6 DIFFERENTIAL VOLTAGE AMPLIFICATION vs LOAD RESISTANCE 4 -15 IIB - Input Bias Current - nA Figure 5 4k 10 k 10 VCC+ = 5 V, VCC- = 0 VO = 20 mV to 3.5 V 4 TA = -55C 1 TA = 25C TA = 125C 0.4 0.1 100 RL - Load Resistance - 400 1k 4k 10 k RL - Load Resistance - Figure 7 2 -5 TA - Free-Air Temperature - C 0.1 100 VCC+ = 5 V VCC- = 0 (Right Scale) 0 VIC - Common-Mode Input Voltage - V VIC - Common-Mode Input Voltage - V TA = 25C Figure 8 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 TYPICAL CHARACTERISTICS DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY VCC = 15 V 100 120 AVD VCC+ = 5 V VCC- = 0 10 140 160 VCC+ = 5 V VCC- = 0 0 180 200 VCC = 15 V 220 -10 0.01 0.3 1 A VD - Differential Voltage Amplivication - dB 20 140 80 VIC = 0 CL = 100 pF TA = 25C - Phase Shift A VD - Differential Voltage Amplivication - dB DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 120 100 VCC + = 5 V VCC - = 0 80 40 20 0 1 10 Figure 9 OUTPUT SATURATION VOLTAGE vs FREE-AIR TEMPERATURE Limited by Thermal Interaction VCC+ = 5 V to 30 V VCC- = 0 Output Saturation Voltage - V Channel Separation - dB 10 VCC = 15 V VI(PP) = 20 V to 5 kHz RL = 2 k TA = 25C 120 RL = 100 RL = 1 k 100 Limited by Pin-to-Pin Capacitance 80 1 k 10 k 100 k 1 M 10 M Figure 10 CHANNEL SEPARATION vs FREQUENCY 140 100 f - Frequency - Hz f - Frequency - MHz 160 VCC = 15 V 60 -20 0.01 0.1 240 10 3 CL = 100 pF TA = 25C Isink = 10 mA 1 Isink = 5 mA Isink = 1 mA 0.1 Isink = 100 A Isink = 10 A Isink = 0 60 10 100 1k 100 k 10 k 1M 0.01 -50 -25 f - Frequency - Hz Figure 11 14 0 25 50 75 100 TA - Free-Air Temperature - C Figure 12 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 TYPICAL CHARACTERISTICS SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY COMMON-MODE REJECTION RATIO vs FREQUENCY 140 TA = 25C K SVR - Supply-Voltage Rejection Ratio - dB CMRR - Common-Mode Rejection Ratio - dB 120 100 VCC = 15 V VCC+ = 5 V VCC- = 0 80 60 40 20 0 10 100 1k 100 k 10 k 120 100 Positive Supply Negative Supply 80 60 40 20 0 0.1 1M VCC = 15 V TA = 25C 1 f - Frequency - Hz I OS - Short-Circuit Output Current - mA I CC - Supply Current Per Amplifier - A 40 420 380 VCC = 15 V 340 VCC+ = 5 V VCC- = 0 0 25 100 k 1M 50 75 100 125 VCC = 15 V TA = -55C 30 TA = 25C 20 TA = 125C 10 0 -10 -20 -30 -40 0 TA - Free-Air Temperature - C TA = 125C TA = 25C TA = -55C 1 2 3 t - Time - min Figure 15 10 k SHORT-CIRCUIT OUTPUT CURRENT vs ELAPSED TIME 460 -25 1k Figure 14 SUPPLY CURRENT vs FREE-AIR TEMPERATURE 260 -50 100 f - Frequency - Hz Figure 13 300 10 Figure 16 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 TYPICAL CHARACTERISTICS PEAK-TO-PEAK INPUT NOISE VOLTAGE OVER A 10-SECOND PERIOD vs TIME 1000 300 300 In 100 100 Vn 30 30 1/f Corner = 2 Hz 10 1 VCC = 2 V to 18 V f = 0.1 Hz to 10 Hz TA = 25C 1600 1200 800 400 0 10 1k 100 10 2000 V N(PP) - Noise Voltage - nV VCC = 2 V to 18 V TA = 25C I n - Equivalent Input Noise Current -fA/ Hz Vn - Equivalent Input Noise Voltage - fA/ Hz 1000 EQUIVALENT INPUT NOISE VOLTAGE AND EQUIVALENT INPUT NOISE CURRENT vs FREQUENCY 0 2 4 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE vs TIME VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE vs TIME 6 VCC = 15 V AV = 1 TA = 25C 5 40 V O - Output Voltage - V V O - Output Voltage - mV 60 20 0 -20 4 2 1 0 -60 -1 0 2 4 6 8 10 12 14 VCC+ = 5 V VCC- = 0 VI = 0 to 4 V RL = 0 AV = 1 TA = 25C 3 -40 -80 -2 t - Time - s 0 10 20 30 t - Time - s Figure 19 16 10 Figure 18 Figure 17 80 8 6 t - Time - s f - Frequency - Hz Figure 20 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 40 50 60 70 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE vs TIME 160 6 VCC+ = 5 V VCC- = 0 VI = 0 to 100 mV RL = 600 to GND AV = 1 TA = 25C 120 100 5 4 V O - Output Voltage - mV 140 80 60 40 2 1 0 0 -1 -20 0 20 40 60 80 VCC+ = 5 V VCC- = 0 VI = 0 to 4 V RL = 4.7 k to 5 V AV = 1 TA = 25C 3 20 -2 100 120 140 10 20 30 40 t - Time - s 0 t - Time - s Figure 21 50 60 70 Figure 22 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE vs TIME 6 5 V O - Output Voltage - V V O - Output Voltage - mV VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE vs TIME 4 VCC+ = 5 V VCC- = 0 VI = 0 to 4 V RL = 0 AV = 1 TA = 25C 3 2 1 0 -1 -2 0 10 20 30 40 50 60 70 t - Time - s Figure 23 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 APPLICATION INFORMATION single-supply operation The LT1014 is fully specified for single-supply operation (VCC- = 0). The common-mode input voltage range includes ground, and the output swings within a few millivolts of ground. Furthermore, the LT1014 has specific circuitry that addresses the difficulties of single-supply operation, both at the input and at the output. At the input, the driving signal can fall below 0 V, either inadvertently or on a transient basis. If the input is more than a few hundred millivolts below ground, the LT1014 is designed to deal with the following two problems that can occur: 1. On many other operational amplifiers, when the input is more than a diode drop below ground, unlimited current flows from the substrate (VCC- terminal) to the input, which can destroy the unit. On the LT1014, the 400- resistors in series with the input (see schematic) protect the device even when the input is 5 V below ground. 2. When the input is more than 400 mV below ground (at TA = 25C), the input stage of similar type operational amplifiers saturates, and phase reversal occurs at the output. This can cause lockup in servo systems. Because of unique phase-reversal protection circuitry (Q21, Q22, Q27, and Q28), the LT1014 outputs do not reverse, even when the inputs are at -1.5 V (see Figure 24). However, this phase-reversal protection circuitry does not function when the other operational amplifier on the LT1014 is driven hard into negative saturation at the output. Phase-reversal protection does not work on an amplifier: D D D D When 4's output is in negative saturation (the outputs of 2 and 3 have no effect) When 3's output is in negative saturation (the outputs of 1 and 4 have no effect) When 2's output is in negative saturation (the outputs of 1 and 4 have no effect) When 1's output is in negative saturation (the outputs of 2 and 3 have no effect) At the output, other single-supply designs either cannot swing to within 600 mV of ground or cannot sink more than a few microproamperes while swinging to ground. The all-npn output stage of the LT1014 maintains its low output resistance and high gain characteristics until the output is saturated. In dual-supply operations, the output stage is free of crossover distortion. 4 3 2 1 0 -1 -2 5 V O - Output Voltage - V 5 V O - Output Voltage - V V I(PP) - Input Voltage - V 5 4 3 2 1 0 -1 (a) VI(PP) = -1.5 V to 4.5 V 4 3 2 1 0 -1 (b) Output Phase Reversal Exhibited by LM358 (c) No Phase Reversal Exhibited by LT1014 Figure 24. Voltage-Follower Response With Input Exceeding the Negative Common-Mode Input Voltage Range 18 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 APPLICATION INFORMATION comparator applications The single-supply operation of the LT1014 can be used as a precision comparator with TTL-compatible output. In systems using both operational amplifiers and comparators, the LT1014 can perform multiple duties (see Figures 25 and 26). 5 4 10 mV 5 mV 2 mV 3 2 Overdrive 1 V O - Output Voltage - V V O - Output Voltage - V 5 VCC+ = 5 V VCC- = 0 TA = 25C 4 3 2 10 mV 5 mV 2 mV 1 Overdrive 0 100 mV 0 VCC+ = 5 V VCC- = 0 TA = 25C 50 100 150 200 250 300 350 400 450 Differential Input Voltage Differential Input Voltage 0 100 mV 0 50 100 150 200 250 300 350 400 450 t - Time - s t - Time - s Figure 25. Low-to-High-Level Output Response for Various Input Overdrives Figure 26. High-to-Low-Level Output Response for Various Input Overdrives low-supply operation The minimum supply voltage for proper operation of the LT1014 is 3.4 V (three Ni-Cad batteries). Typical supply current at this voltage is 290 A; therefore, power dissipation is only 1 mW per amplifier. offset voltage and noise testing Figure 30 shows the test circuit for measuring input offset voltage and its temperature coefficient. This circuit with supply voltages increased to 20 V is also used as the burn-in configuration. The peak-to-peak equivalent input noise voltage of the LT1014 is measured using the test circuit shown in Figure 27. The frequency response of the noise tester indicates that the 0.1-Hz corner is defined by only one zero. The test time to measure 0.1-Hz to 10-Hz noise should not exceed 10 seconds, as this time limit acts as an additional zero to eliminate noise contribution from the frequency band below 0.1 Hz. An input noise-voltage test is recommended when measuring the noise of a large number of units. A 10-Hz input noise-voltage measurement correlates well with a 0.1-Hz peak-to-peak noise reading because both results are determined by the white noise and the location of the 1/f corner frequency. Noise current is measured by the circuit and formula shown in Figure 28. The noise of the source resistors is subtracted. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 19 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 APPLICATION INFORMATION 0.1 F 100 k 10 + 2 k + LT1014 - 4.7 F 4.3 k 22 F LT1001 2.2 F - AVD = 50,000 Oscilloscope Rin = 1 M 100 k 110 k 24.3 k 0.1 F NOTE A: All capacitor values are for nonpolarized capacitors only. Figure 27. 0.1-Hz to 10-Hz Peak-to-Peak Noise Test Circuit 10 k 10 M 10 M + 100 10 M 10 M Vn LT1014 In + Vno2 * (820 nV)2 40 MW - Metal-film resistor Figure 28. Noise-Current Test Circuit and Formula 50 (see Note A) 15 V 100 (see Note A) + LT1014 VO = 1000 VIO - 50 (see Note A) -15 V NOTE A: Resistors must have low thermoelectric potential. Figure 29. Test Circuit for VIO and VIO 20 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 100 12 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 APPLICATION INFORMATION 5V Q3 2N2905 820 Q1 2N2905 T1 10 F + 68 1N4002 (4) 10 F + SN74HC04 (6) 0.002 F 10 k 10 k 0.33 F Q4 2N2222 820 Q2 2N2905 10 k 100 k 5V 10 2 k 1/4 LT1014 + 100 pF 5V 10 k 20-mA Trim 4 k 10 k 1 k 4-mA Trim 4.3 k 80 1/4 LT1014 + 100 4-mA to 20-mA OUT To Load 2.2 k Max LT1004 1.2 V IN 0 to 4 V 1% film resistor. Match 10-k resistors 0.05%. T1 = PICO-31080 Figure 30. 5-V Powered, 4-mA to 20-mA Current-Loop Transmitter With 12-Bit Accuracy POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 21 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 APPLICATION INFORMATION 5V 100 k 1/4 LT1014 + 10 F + + 1/4 LT1014 - - To Inverter Driver 1N4002 (4) T1 0.1 68 k 4-mA to 20-mA OUT Fully Floating 10 k 2 k 4-mA Trim LT1004 1.2 V 301 4 k 4.3 k 5V 1 k 20-mA Trim IN 0 to 4 V 1% film resistor Figure 31. Fully Floating Modification to 4-mA to 20-mA Current-Loop Transmitter With 8-Bit Accuracy 5V 1/2 LTC1043 IN+ 5 6 2 5 6 3 IN- 18 8 1/4 LT1014 1 F 1 F + - 15 7 4 OUT A R2 R1 1/2 LTC1043 IN+ 8 7 11 IN- + 1/4 LT1014 1 F 1 F 12 13 3 2 - 14 0.01 F 1 OUT B R2 R1 NOTE A: VIO = 150 V, AVD = (R1/R2) + 1, CMRR = 120 dB, VICR = 0 to 5 V Figure 32. 5-V Single-Supply Dual Instrumentation Amplifier 22 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 LT1014, LT1014A, LT1014D QUAD PRECISION OPERATIONAL AMPLIFIERS SLOS039D - JULY 1989 - REVISED AUGUST 2009 APPLICATION INFORMATION 10 200 k 2 LT1014 20 k 3 - 10 k 1 10 k + 10 k 5V 13 RG (2 k Typ) 12 1 F 20 k 5 IN+ - 4 14 200 k 6 To Input Cable Shields - IN- 8 LT1014 9 5V + LT1014 + 10 k OUT 11 - LT1014 7 + 10 k 10 k 5V 1% film resistor. Match 10-k resistors 0.05%. For high source impedances, use 2N2222 as diodes (with collector connected to base). NOTE A: AVD = (400,000/RG) + 1 Figure 33. 5-V Powered Precision Instrumentation Amplifier POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 23 PACKAGE OPTION ADDENDUM www.ti.com 23-Apr-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) 5962-89677012A ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-8967701CA ACTIVE CDIP J 14 1 TBD Call TI Call TI 5962-89677022A ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-8967702CA ACTIVE CDIP J 14 1 TBD Call TI Call TI LT1014AMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type LT1014AMJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type LT1014AMJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type LT1014CN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LT1014CNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LT1014DDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DDWE4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DDWRE4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DDWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DIDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DIDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DIDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DIDWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DIN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LT1014DINE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Addendum-Page 1 (3) PACKAGE OPTION ADDENDUM www.ti.com 23-Apr-2012 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DMDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LT1014DN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LT1014DNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LT1014IN OBSOLETE PDIP N 14 LT1014MFKB ACTIVE LCCC FK 20 1 TBD LT1014MJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type LT1014MJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type Call TI Samples (Requires Login) LT1014DMDW TBD (3) Call TI POST-PLATE N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 23-Apr-2012 OTHER QUALIFIED VERSIONS OF LT1014D : * Enhanced Product: LT1014D-EP NOTE: Qualified Version Definitions: * Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LT1014DDWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 LT1014DIDWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LT1014DDWR SOIC DW 16 2000 367.0 367.0 38.0 LT1014DIDWR SOIC DW 16 2000 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated