Data Sheet HL6362MG/63MG AIGaInP Laser Diode 640nm/45mW Features: Outline Visible light output: 640nm Typ. Optical output power: 45 mW (CW) Single transverse mode Low operating current: 90mA Typ. Low operating voltage: 2.6V Max. Operating temperature: +50C TE mode oscillation Applications Internal Circuit 1 HL6362MG/63MG Rev.2 Mar. 08, 2013 Laser leveler Laser scanner Light source of optical equipments Data Sheet HL6362MG/63MG Absolute Maximum Ratings (Tc=25C) Item Symbol Ratings Unit Optical output power Po 45 mW LD Reverse Voltage VR(LD) 2 V PD Reverse Voltage VR(PD) 30 V Operating Temperature Topr -10 ~ +50 C Storage Temperature Tstg -40 ~ +85 C Optical and Electrical Characteristics (Tc=25C) Parameter 2 Symbol Min Typ Max Unit Test Condition Threshold current Ith - 45 60 mA - Operating current Iop - 90 110 mA Po=40mW Operating voltage Vop - 2.4 2.6 V Po=40mW Beam divergence Parallel to the junction // 7 10 13 o Po=40mW Beam divergence Perpendicular to the junction 16 21 24 o Po=40mW Lasing Wavelength p - 640 643 nm Po=40mW Monitor current Is 0.15 0.30 0.60 mA Po=40mW, VR(PD)=5V HL6362MG/63MG Rev.2 Mar. 08, 2013 Data Sheet HL6362MG/63MG Typical Characteristic Curves 3 HL6362MG/63MG Rev.2 Mar. 08, 2013 Data Sheet HL6362MG/63MG Cautions 1.Oclaro Japan,Inc.(OCJ) neither warrants nor grants licenses of any our lights or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document, OCJ bears no responsibility for problems that may arise with third party's right, including intellectual property rights, in connection with use of the information contained in this document. 2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3.OCJ makes every attempt to ensure that its products are of high quality and reliability. However, contact our sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic safety equipment or medical equipment for life support. 4.Design your application so that the products is used within the ranges guaranteed by OCJ. particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. OCJ. bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating OCJ product does not cause bodily injury, fire or other consequential damage due to operation of the OCJ product. 5.This product is not designed to be radiation resistant. 6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from OCJ. 7.Contact our sales office for any questions regarding this document or OCJ. products. 1.The laser light is harmful to human body especially to eye no matter what directly or indirectly. The laser beam shall be observed or adjusted through infrared camera or equivalent. 2.This product (without violet laser diode) contains gallium arsenide (GaAs), which may seriously endanger your health even at very low doses. Please avoid treatment which may create GaAs powder or gas, such as disassembly or performing chemical experiments, when you handle the product. When disposing of the product, please follow the laws of your country and separate it from other waste such as industrial waste and household garbage. Contact Information www.oclaro.com Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Oclaro before they become applicable to any particular order or contract. In accordance with the Oclaro policy of continuous improvement specifications may change without notice. Further details are available from any Oclaro sales representative. HL6362MG/63MG Rev.2 Mar. 08, 2013 (c)Oclaro 2013. Oclaro the Oclaro, Inc. logo, and all other Oclaro, Inc product names and slogans are trademarks or registered trademarks of Oclaro, Inc. in the U.S.A. or other countries. Products described in this datasheet may be covered by one or more patents in the U.S.A. and abroad. Information in this datasheet is subject to change without notice.. 4 HL6362MG/63MG Rev.2 Mar. 08, 2013