SIGC06T60G 3 IGBT Chip FEATURES: * 600V Trench & Field Stop technology * low VCE(sat) * low turn-off losses * short tail current * positive temperature coefficient * easy paralleling Chip Type SIGC06T60G VCE ICn 600V 10A This chip is used for: * power module * discrete components C Applications: * drives * white goods * resonant applications Die Size G Package 2.44 x 2.42 mm2 sawn on foil E Ordering Code Q67050A4344-A101 MECHANICAL PARAMETER: Raster size 2.44 x 2.42 mm 2 5.9 / 3.6 mm 2 Thickness 70 m Wafer size 150 mm Flat position 0 deg Emitter pad size 1.558 x 1.577 Gate pad size 0.361 x 0.513 Area total / active Max. possible chips per wafer 2485 pcs Passivation frontside Photoimide Emitter metallization 3200 nm AlSiCu Collector metallization Die bond Wire bond Reject ink dot size Recommended storage environment 1400 nm Ni Ag -system suitable for epoxy and soft solder die bonding electrically conductive glue or solder Al, <500m 0.65mm ; max 1.2mm store in original container, in dry nitrogen, < 6 month at an ambient temperature of 23C Edited by INFINEON Technologies AI PS DD CLS, L7521A, Edition 2, 27.01.2005 SIGC06T60G MAXIMUM RATINGS: Parameter Symbol Value Unit 600 V Collector-emitter voltage, Tj= 25 C VC E DC collector current, limited by Tjmax IC 1) A Pulsed collector current, tp limited by Tjmax Icpuls 30 A Gate emitter voltage V GE 20 V Operating junction and storage temperature Tj, Ts t g -40 ... +175 C SC data, VGE = 15V, VCC = 360V 1) Tvj = 150C Tvj = 25C 6 tp s 8 depending on thermal properties of assembly STATIC CHARACTERISTICS (tested on chip), Tj=25 C, unless otherwise specified Parameter Symbol Value Conditions min. Unit typ. max. Collector-emitter breakdown voltage V(BR)CES VGE=0V , IC= 2mA 600 Collector-emitter saturation voltage VCE(sat) VGE=15V, IC =10A 1.1 1.5 1.9 Gate-emitter threshold voltage VGE(th) IC =150A , VGE=VCE 5.0 5.8 6.5 Zero gate voltage collector current ICES VCE=600V , VGE=0V 0.6 A Gate-emitter leakage current IGES VCE=0V , VGE=20V 300 nA Integrated gate resistor RGint V none ELECTRICAL CHARACTERISTICS (verified by design/characterization): Parameter Symbol Conditions Value min. typ. Input capacitance Ci s s V C E= 2 5 V , Output capacitance Co s s V GE= 0 V , 40 Reverse transfer capacitance Cr s s f =1MHz 17 max. 551 Unit pF SWITCHING CHARACTERISTICS (verified by design/characterization), inductive load Parameter Symbol Turn-on delay time t d(on) Rise time tr Turn-off delay time td(off) Fall time tf 2) Conditions Value min. Tj= 1 2 5 C V C C = 30 0 V , I C =10A , V GE= - 1 5 / 1 5 V , R G = 2 7 values also influenced by parasitic L- and C- in measurement and package. Edited by INFINEON Technologies AI PS DD CLS, L7521A, Edition 2, 27.01.2005 typ. 12 13 120 130 2) max. Unit ns SIGC06T60G CHIP DRAWING: Edited by INFINEON Technologies AI PS DD CLS, L7521A, Edition 2, 27.01.2005 SIGC06T60G FURTHER ELECTRICAL CHARACTERISTICS: This chip data sheet refers to the device data sheet DESCRIPTION: AQL 0,65 for visual inspection according to failure catalog Electrostatic Discharge Sensitive Device according to MIL-STD 883 Test-Normen Villach/Pruffeld Published by Infineon Technologies AG, Bereich Kommunikation St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 2004 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and / or maintain and sustain and / or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Edited by INFINEON Technologies AI PS DD CLS, L7521A, Edition 2, 27.01.2005