SILICON PLANAR EPITAXIAL
NPN TRANSISTOR
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing orders.
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9276
Issue 1
Page 1 of 3
2N4001
• Low Power
• Hermetic TO-39 Metal package.
• Ideally suited for Medium Speed Switching
and General Purpose Applications
• Screening Options Available
ABSOLUTE MAXIMUM RATINGS
(TA = 25°C unless otherwise stated)
VCBO Collector – Base Voltage 120V
VCEO Collector – Emitter Voltage 100V
VEBO Emitter – Base Voltage 8V
IC Continuous Collector Current 1.0A
PD Total Power Dissipation at TA = 25°C 1.0W
Derate Above 25°C 5.71mW/°C
TJ Junction Temperature Range -65 to +200°C
Tstg Storage Temperature Range -65 to +200°C
THERMAL PROPERTIES
Symbols Parameters Max. Units
RθJA Thermal Resistance, Junction To Ambient 175 °C/W
SILICON PLANAR EPITAXIAL
NPN TRANSISTOR
2N4001
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9276
Issue 1
Page 2 of 3
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
Symbols Parameters Test Conditions Min.
Typ Max.
Units
V(BR)CEO
(1)
Collector-Emitter
Breakdown Voltage IC = 10mA IB = 0 100
V(BR)CBO Collector-Base
Breakdown Voltage IC = 100µA IE = 0 120
V(BR)EBO Emitter-Base Breakdown
Voltage IE = 1.0mA IC = 0 8
V
VCE(sat)
(1)
Collector-Emitter Saturation
Voltage IC = 1.0A IB = 100mA 0.5 V
hFE
(1)
Forward-current transfer
ratio IC = 500mA VCE = 2V 40 120
DYNAMIC CHARACTERISTICS
IC = 100mA VCE = 10V
fT Transition Frequency
f = 10MHz
30 40 MHz
VCB = 10V IE = 0
Cobo Output Capacitance
f = 1.0MHz
60 pF
IC = 500mA VCC = 30V
ton Turn-On Time IB1 = 50mA
300
IC = 500mA VCC = 30V
toff Turn-Off Time IB1 = - IB2 = 50mA 2000
ns
Notes
NotesNotes
Notes
(1) Pulse Width ≤ 300us, δ ≤ 2%
SILICON PLANAR EPITAXIAL
NPN TRANSISTOR
2N4001
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9276
Issue 1
Page 3 of 3
MECHANICAL DATA
Dimensions in mm (inches)
TO
-
39 (TO
-
205AD
) METAL PACKAGE
Underside View
Pin 1 - Emitter Pin 2 - Base Pin 3 - Collector
0.89
(0.035)max.
12.70
(0.500)
min. 0.41 (0.016)
0.53 (0.021)
dia.
5.08 (0.200)
typ.
0.71 (0.028)
0.86 (0.034)
2.54
(0.100)
45°
6.10 (0.240)
6.60 (0.260)
8.51 (0.34)
9.40 (0.37)
7.75 (0.305)
8.51 (0.335)
123
0.74 (0.029)
1.14 (0.045)
