AND185HAP Ultra Bright LED Lamps: Type 3 Weight: 0.31 g Unit: mm 5.60.3 AND185HAP InGaAlP High Brightness Amber Light Emission T-1 3/4 Package (5 mm) 5.00.2 1.0 MIN. 25.4 MIN. 1.00.2 8.60.3 Features 0.5 * Peak wavelength (p = 612 nm) high bright emission * All plastic mold type, clear colorless lens * Low drive current: 1 to 20 mA DC * Excellent On-Off contrast ratio * Fast response time, capable of pulse operation * High power luminous intensity * Suitable for Outdoor Message Signboards, Automotive Use * RoHS Compliant Maximum Ratings (Ta = 25C) 2.54 0.5 Cathode Index 1 2 1. Anode 2. Cathode Characteristics Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 5 V Power Dissipation PD 125 mW Operating Temperature Range TOpr -40 to 85 C Storage Temperature Range TStg -40 to 100 C Electro-Optical Characteristics (Ta = 25C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA - 2.0 2.4 V Reverse Current IR VR = 5 V - - 10 A Luminous Intensity IV IF = 20 mA 8,500 11,150 - mcd Peak Emission Wavelength P IF = 20 mA - 612 - nm Spectral Line Half Width IF = 20 mA - 17 - nm Dominant Wavelength d IF = 20 mA - 605 - nm Full Viewing Angle IV = 1/2 Peak - 6 - degree Precaution Please be careful of the following: 1. Soldering temperature: 260C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 6/12/07 AND185HAP InGaAlP High Brightness Amber Light Emission Ultra Bright LED Lamps: Type 3 IV - IF IF - VF 20000 Ta = 25C Ta = 25C 30 Luminous Intensity IV (mcd) Forward Current IF (mA) 50 10 5 3 10000 5000 3000 1000 500 1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 300 2.3 1 Forward Voltage VF (V) 5 10 30 50 100 Forward Current IF (mA) IV - TC Relative Luminous Intensity - Wavelength 3 1.0 Relative Luminous Intensity Relative Luminous Intensity 3 1 0.5 0.3 0.1 -20 0 20 40 60 IF = 20 mA Ta = 25C 0.8 0.6 0.4 0.2 0 580 80 600 620 640 660 680 700 Wavelength (nm) Case Temperature TC (C) Radiation Pattern IF - Ta 20 10 0 10 Ta = 25C 20 30 30 40 40 50 50 60 60 70 70 80 80 Allowable Forward Current IF (mA) 80 60 40 20 90 90 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (C) Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 100 6/12/07