Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 •
sales@purdyelectronics.com
• www.purdyelectronics.com
6/12/07
AND185HAP
Ultra Bright LED Lamps: Type 3
Weight: 0.31 g Unit: mm
1.0±0.2
8.6±0.3
5.6±0.3
5.0±0.2
25.4 MIN.
0.5
1.0 MIN.
1. Anode
2. Cathode
0.5
2.54
12
Cathode Index
AND185HAP
InGaAlP High Brightness Amber Light
Emission
T-1 3/4 Package (5 mm)
Features
• Peak wavelength (
λ
p = 612 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards, Automotive Use
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current
I
F
50 mA
Reverse Voltage
V
R
5V
Power Dissipation
P
D
125 mW
Operating Temperature Range
T
Opr
-40 to 85 °C
Storage Temperature Range
T
Stg
-40 to 100 °C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage
V
F
I
F
= 20 mA –2.02.4V
Reverse Current
I
R
V
R
= 5 V – – 10 µA
Luminous Intensity
I
V
I
F
= 20 mA 8,500 11,150 – mcd
Peak Emission Wavelength
λ
P
I
F
= 20 mA – 612 – nm
Spectral Line Half Width
∆
λ
I
F
= 20 mA –17–nm
Dominant Wavelength
λ
dI
F
= 20 mA – 605 – nm
Full Viewing Angle
θ
I
V
= 1/2 Peak – 6 – degree
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
• RoHS Compliant
AND185HAP
InGaAlP High Brightness Amber Light Emission Ultra Bright LED Lamps: Type 3
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 •
sales@purdyelectronics.com
• www.purdyelectronics.com
6/12/07
-20 0 20 40 60 80
0.1
0.3
0.5
1
3
IV – TC
Case Temperature TC (°C)
Relative Luminous Intensity
IF – Ta
Ambient Temperature Ta (°C)
Allowable Forward Current IF (mA)
0 20 40 60 80 100
0
20
40
60
80
580 600 620 640 660 680 700
0
0.2
0.4
0.6
0.8
1.0
Relative Luminous Intensity – Wavelength
Wavelength λ (nm)
Relative Luminous Intensity
IF = 20 mA
Ta = 25°C
Radiation Pattern
Ta = 25°C
90°
80°
70°
60°
50°
40°
30°
20°10°0°10°20°
30°
40°
50°
60°
70°
80°
90°
0.200.40.80.6
1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3
1
3
5
10
30
50
IF – VF
Forward Voltage VF (V)
Forward Current IF (mA)
Ta = 25°C
1 3 5 10 30 50 100
300
500
10000
5000
3000
1000
20000
Ta = 25°C
IV – IF
Forward Current IF (mA)
Luminous Intensity IV (mcd)
