P-NS www.vishay.com Vishay Dale Thin Film Commercial Thin Film Resistor, Surface Mount Chip FEATURES Actual Size 0505 For applications requiring low noise, stability, low temperature coefficient of resistance, and low voltage coefficient, all Vishay's proven precision thin film wraparound resistors will meet your exact requirements. Manufactured with the same material and processes as QPL and manufactured in a QPL facility. CONSTRUCTION SPM Passivation Enhancement Passivated Nichrome Resistive Film Solder Coating * Moisture resistant (SPM) special passivation method Available * Non-standard values available * Pre-tinned terminations over nickel barrier Available (gold available) * Very low noise and voltage coefficient (< -35 dB, 0.1 ppm/V) Available * Non-inductive * Laser-trimmed tolerances to 0.02 % Available * In-lot tracking less than 5 ppm/C * Epoxy bondable termination available * Sulfur resistant (per ASTM B809-95 humid vapor test) * Flame resistant UL 94 V-0 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. Nickel Barrier High Purity Alumina Substrate Adhesion Layer TYPICAL PERFORMANCE ABSOLUTE TCR TOL. 25 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Passivated nichrome 10 to 6.19 M 10 ppm/C to 100 ppm/C 0.02 % to 5 % R 0.02 % 0.1 ppm/V (typical) 75 V to 200 V -55 C to +155 C -55 C to +155 C < -35 dB (typical) R 0.01 % CONDITIONS -55 C to +125 C +25 C 2000 h at 70 C 1 year at +25 C COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) 50 100 150 150 250 250 250 500 400 400 800 800 1000 WORKING VOLTAGE (V) 75 75 75 75 100 100 100 150 200 150 150 200 200 0402 0502 0505 0603 0705 0805 1005 1010 1206 1505 2208 2010 2512 Notes (1) 0705 and 0805 are the same (only use 0805 when ordering) (2) Values > 1M best TCR 25 ppm/C Revision: 02-May-16 RESISTANCE RANGE () 0.1 % < 0.1 % 24.9 to 100K 250 to 100K 20 to 150K 250 to 150K 20 to 301K 250 to 301K 10 to 261K 250 to 261K 10 to 475K 250 to 475K 10 to 475K 250 to 475K 10 to 649K 250 to 649K 50 to 1M 250 to 1M 250 to 1M 10 to 1.5M (2) 10 to 1M 250 to 1M 250 to 1M 10 to 3.16M (2) 250 to 1M 10 to 4.02M (2) 250 to 1M 10 to 6.19M (2) Document Number: 60023 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P-NS www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T L E CASE SIZE TERM L W 0402 B 0.042 0.008 0.022 0.005 0502 B 0.055 0.006 0.025 0.005 0505 B 0.055 0.006 0.050 0.005 0603 B 0.064 0.006 0.032 0.005 0705, 0805 (1) B 0.080 0.006 0.050 0.005 1005 B 0.105 0.007 0.050 0.005 1010 B 0.105 0.007 0.100 0.005 1206 B 0.126 0.008 0.063 0.005 1505 B 0.155 0.007 0.050 0.005 2010 B 0.209 0.009 0.098 0.005 2208 B 0.230 0.007 0.075 0.005 2512 B 0.259 0.009 0.124 0.005 Note (1) 0705 and 0805 are the same (only use 0805 when ordering). T 0.012 to 0.033 0.012 to 0.033 0.012 to 0.033 0.020 max. 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 ENVIRONMENTAL TESTS Thermal Shock 0.02 0.02 Short Time Overload 0.01 0.01 Low Temperature Operation 0.01 0.01 Resistance to Solder Heat 0.04 0.03 Moisture Resistance 0.02 0.01 High Temperature Exposure 0.03 0.06 Load Life (10 000 h, + 70 C) 0.05 0.05 25 ppm/C 25 ppm/C 100 Precent of Rated Power 100 k R (%) TCR E 0.010 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.020 + 0.005/- 0.010 0.015 0.005 0.020 0.005 0.020 0.005 0.020 0.005 DERATING CURVE 10 k R (%) ENVIRONMENTAL TEST D 0.010 0.005 0.010 0.005 0.010 0.005 0.012 0.005 0.016 0.008 0.015 0.005 0.015 0.005 0.020 + 0.005/- 0.010 0.015 0.005 0.020 0.005 0.020 0.005 0.020 0.005 80 60 40 20 0 0 70 125 155 Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: P-1206E1002BBTS P - GLOBAL CASE MODEL SIZE P- 0402 0502 0505 0603 0805 1005 1010 1206 1505 2208 2010 2512 1 2 TCR CHARACTERISTIC Y = 10 ppm/C (2) D = 15 ppm/C E = 25 ppm/C H = 50 ppm/C K = 100 ppm/C Note (2) 49.9 0 6 E 1 RESISTANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. "R" designates the decimal point. Example: 10R0 = 10 1001 = 1 k 1002 = 10 k 0 TOLERANCE 0 2 B B TERMINATION Q = 0.02 % (3) B = Wraparound A = 0.05 % (3) Sn/Pb solder B = 0.1 % 63 % Sn/37 % Pb D = 0.5 % w/ nickel barrier F = 1 % G = Wraparound Au G = 2 % over Ni (gold) J = 5 % termination epoxy bondable Note RoHS-compliant - e4 (3) For values S = Wraparound 250 electroplated 100 % pure matte tin RoHS-compliant e3 T S PACKAGING BULK BS = 100 min., 1 mult WAFFLE WS = 100 min., 1 mult W0 = 100 min.,100 mult WI = 100 min.,1 mult (4) WP = 100 min.,1 mult (5) TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (6) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min., 1 mult (4) TP = 100 min., 1 mult (5) Notes (4) Item single lot date code (5) Package unit single lot date code (6) Preferred packaging code Historical Part Number Example: P0805H6801BBT (for reference purposes only) P 0805 H 6801 B B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING Revision: 02-May-16 Document Number: 60023 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000