Tyco / Electronics PRODUCT: 1206SFS150FM/63 Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 DOCUMENT: SCD 26343 PCN: RF0155-000 REV LETTER: B REV DATE: SEPTEMBER 9, 2005 PAGE NO.: 1 OF 1 Surface Mount Fuse Slow Blow, Marked Specification Status: Released Max Electrical Rating at 25C Max Voltage: 63VDC Max Interrupt Current: 50A G Termination Material: Silver, Nickel, Tin Fuse Element: Silver Body Material: Glass Ceramic Marking: G Part Identification Indicates 1.5A device TABLE I. DIMENSIONS: A mm: in: MIN 3.00 B MAX 3.40 MIN 0.77 C MAX 1.17 (0.118) (0.134) (0.030) (0.046) MIN 0.26 (0.010) D MAX 0.76 MIN 1.40 MAX 1.80 (0.030) (0.055) (0.071) TABLE II. PERFORMANCE RATINGS @ 25C (unless otherwise noted): RATED NOMINAL COLD CURRENT (A) DCR ()* 100% of rated current 1.5 0.15 4 hours min * Measured at 10% of rated current and 25C Agency Recognition: Precedence: Effectivity: OPERATING TEMPERATURE (C) 800% of rated current 120 seconds max 3 seconds max 0.05 seconds max MIN MAX -55 125 UL E197536 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Materials Information ROHS Compliant CLEAR TIME @ 200% of rated 300% of rated current current ELV Compliant (c) 2005 Tyco Electronics Corporation. All rights reserved.