Document Number: 94407 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 11-Aug-08 1
Phase Control Thyristors
(Hockey PUK Version), 720 A
ST330CPbF Series
Vishay High Power Products
FEATURES
Center amplifying gate
Metal case with ceramic insulator
International standard case TO-200AB (E-PUK)
Lead (Pb)-free
Designed and qualified for industrial level
TYPICAL APPLICATIONS
DC motor controls
Controlled DC power supplies
AC controllers
ELECTRICAL SPECIFICATIONS
PRODUCT SUMMARY
IT(AV) 720 A
TO-200AB (E-PUK)
RoHS
COMPLIANT
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
IT(AV)
720 A
Ths 55 °C
IT(RMS)
1420 A
Ths 25 °C
ITSM
50 Hz 9000 A
60 Hz 9420
I2t50 Hz 405 kA2s
60 Hz 370
VDRM/VRRM 400 to 1600 V
tqTypical 100 µs
TJ- 40 to 125 °C
VOLTAGE RATINGS
TYPE NUMBER VOLTAGE
CODE
VDRM/VRRM, MAXIMUM REPETITIVE PEAK
AND OFF-STATE VOLTAGE
V
VRSM, MAXIMUM
NON-REPETITIVE PEAK VOLTAGE
V
IDRM/IRRM MAXIMUM
AT TJ = TJ MAXIMUM
mA
ST330C..C
04 400 500
50
08 800 900
12 1200 1300
14 1400 1500
16 1600 1700
www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 94407
2Revision: 11-Aug-08
ST330CPbF Series
Vishay High Power Products Phase Control Thyristors
(Hockey PUK Version), 720 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average on-state current
at heatsink temperature IT(AV)
180° conduction, half sine wave
double side (single side) cooled
720 (350) A
55 (75) °C
Maximum RMS on-state current IT(RMS) DC at 25 °C heatsink temperature double side cooled 1420
A
Maximum peak, one-cycle
non-repetitive surge current ITSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
9000
t = 8.3 ms 9420
t = 10 ms 100 % VRRM
reapplied
7570
t = 8.3 ms 7920
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
405
kA2s
t = 8.3 ms 370
t = 10 ms 100 % VRRM
reapplied
287
t = 8.3 ms 262
Maximum I2t for fusing I2t t = 0.1 to 10 ms, no voltage reapplied 4050 kA2s
Low level value of threshold voltage VT(TO)1 (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum 0.91 V
High level value of threshold voltage VT(TO)2 (I > π x IT(AV)), TJ = TJ maximum 0.92
Low level value of on-state slope resistance rt1 (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum 0.58 mΩ
High level value of on-state slope resistance rt2 (I > π x IT(AV)), TJ = TJ maximum 0.57
Maximum on-state voltage VTM Ipk = 1810 A, TJ = TJ maximum, tp = 10 ms sine pulse 1.96 V
Maximum holding current IHTJ = 25 °C, anode supply 12 V resistive load 600 mA
Typical latching current IL1000
SWITCHING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum non-repetitive rate of
rise of turned-on current dI/dt Gate drive 20 V, 20 Ω, tr 1 µs
TJ = TJ maximum, anode voltage 80 % VDRM
1000 A/µs
Typical delay time td
Gate current 1 A, dIg/dt = 1 A/µs
Vd = 0.67 % VDRM, TJ = 25 °C 1.0
µs
Typical turn-off time tq
ITM = 550 A, TJ = TJ maximum, dI/dt = 40 A/µs,
VR = 50 V, dV/dt = 20 V/µs, gate 0 V 100 Ω, tp = 500 µs 100
BLOCKING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum critical rate of rise of
off-state voltage dV/dt TJ = TJ maximum linear to 80 % rated VDRM 500 V/µs
Maximum peak reverse and
off-state leakage current
IRRM,
IDRM
TJ = TJ maximum, rated VDRM/VRRM applied 50 mA
Document Number: 94407 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 11-Aug-08 3
ST330CPbF Series
Phase Control Thyristors
(Hockey PUK Version), 720 A Vishay High Power Products
Note
The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC
TRIGGERING
PARAMETER SYMBOL TEST CONDITIONS
VALUES UNITS
TYP. MAX.
Maximum peak gate power PGM TJ = TJ maximum, tp 5 ms 10.0 W
Maximum average gate power PG(AV) TJ = TJ maximum, f = 50 Hz, d% = 50 2.0
Maximum peak positive gate current IGM TJ = TJ maximum, tp 5 ms 3.0 A
Maximum peak positive gate voltage + VGM TJ = TJ maximum, tp 5 ms 20 V
Maximum peak negative gate voltage - VGM 5.0
DC gate current required to trigger IGT
TJ = - 40 °C
Maximum required gate trigger/
current/voltage are the lowest
value which will trigger all units
12 V anode to cathode applied
200 -
mATJ = 25 °C 100 200
TJ = 125 °C 50 -
DC gate voltage required to trigger VGT
TJ = - 40 °C 2.5 -
V
TJ = 25 °C 1.8 3.0
TJ = 125 °C 1.1 -
DC gate current not to trigger IGD
TJ = TJ maximum
Maximum gate current/voltage
not to trigger is the maximum
value which will not trigger any
unit with rated VDRM anode to
cathode applied
10 mA
DC gate voltage not to trigger VGD 0.25 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating junction temperature range TJ- 40 to 125 °C
Maximum storage temperature range TStg - 40 to 150
Maximum thermal resistance, junction to heatsink RthJ-hs
DC operation single side cooled 0.09
K/W
DC operation double side cooled 0.04
Maximum thermal resistance, case to heatsink RthC-hs
DC operation single side cooled 0.02
DC operation double side cooled 0.01
Mounting force, ± 10 % 9800
(1000)
N
(kg)
Approximate weight 83 g
Case style See dimensions - link at the end of datasheet TO-200AB (E-PUK)
ΔRthJ-hs CONDUCTION
CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.012 0.011 0.008 0.007
TJ = TJ maximum K/W
120° 0.014 0.012 0.014 0.013
90° 0.017 0.015 0.019 0.017
60° 0.025 0.022 0.026 0.023
30° 0.043 0.036 0.043 0.037
www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 94407
4Revision: 11-Aug-08
ST330CPbF Series
Vishay High Power Products Phase Control Thyristors
(Hockey PUK Version), 720 A
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Current Ratings Characteristics
Fig. 3 - Current Ratings Characteristics
Fig. 4 - Current Ratings Characteristics
Fig. 5 - On-State Power Loss Characteristics
Fig. 6 - On-State Power Loss Characteristics
70
80
90
100
110
120
130
0 50 100 150 200 250 300 350 400
30° 60° 90°
120°
180°
Average On-state Current (A)
Conduction Angle
Maximum Allowable Heatsink Temperature (°C)
ST3 3 0 C . . C Se r i e s
(Single Side Cooled)
R (DC) = 0.09 K/ W
thJ-hs
20
30
40
50
60
70
80
90
100
110
120
130
0 100 200 300 400 500 600 700 800 900
DC
30°
60°
90°120° 180°
Average On-state Current (A)
Conduction Period
Maximum Allowable Heatsink Temperature (°C)
ST3 3 0 C . . C Se r i e s
(Single Side Cooled)
R (DC) = 0.09 K/W
thJ-hs
20
30
40
50
60
70
80
90
100
110
120
130
0 200 400 600 800 1000
30° 60° 90° 120° 180°
Average On-state Current (A)
Conduction Angle
Maximum Allowable Heatsink Temperature (°C)
ST3 3 0 C . . C Se r i e s
(Double Side Cooled)
R (DC) = 0.04 K/ W
thJ-hs
10
20
30
40
50
60
70
80
90
100
110
120
130
0 200 400 600 800 1000 1200 1400 1600
DC
30°
60°
90°
120°
180°
Average On-state Current (A)
Conduction Period
Maximum Allowable Heatsink Temperature (°C
)
ST330C..C Se ries
(Double Side Cooled)
R (DC) = 0.04 K/ W
thJ-hs
0
200
400
600
800
1000
1200
1400
0 100 200 300 400 500 600 700 800
180°
120°
90°
60°
30° RM S Li m i t
Conduction Angle
Ma ximum A ve ra g e On -sta t e Pow e r Lo ss (W)
Average On-state Current (A)
ST3 3 0 C . . C Se r i e s
T = 125°C
J
0
200
400
600
800
1000
1200
1400
1600
1800
0 200 400 600 800 1000 1200
DC
180°
120°
90°
60°
30°
RM S Li m i t
Conduction Period
Maximum Average On-state Power Loss (W)
Average On-state Current (A)
ST330C..C Series
T = 125°C
J
Document Number: 94407 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 11-Aug-08 5
ST330CPbF Series
Phase Control Thyristors
(Hockey PUK Version), 720 A Vishay High Power Products
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 9 - On-State Voltage Drop Characteristics
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
3500
4000
4500
5000
5500
6000
6500
7000
7500
8000
110100
Number Of Equal Amp litude Half Cyc le Current Pulses (N)
Pea k Ha lf S
ine Wave On-state Current (A)
Initia l T = 125°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
ST3 3 0 C . . C Se r i e s
At Any Rated Loa d Condition And With
Rated V Applied Following Surge.
RRM
3500
4000
4500
5000
5500
6000
6500
7000
7500
8000
8500
9000
0.01 0.1 1
Pulse Tra in Du ra t io n (s)
Versus Pulse Train Duration. Control
Peak Half Sine Wave On-state Current (A)
Initial T = 125°C
No Voltage Reapplied
Ra ted V Reap plied
RRM
J
ST3 3 0 C . . C Se r i e s
Maximum Non Repetitive Surge Current
Of Conduction May Not Be Maintained.
100
1000
10000
01234567
T = 2 5° C
J
In st a n t a n e o u s O n -st a t e Cu rr e n t ( A)
Instantaneous On-state Voltage (V)
T = 1 2 5 ° C
J
ST330C..C Serie s
0.001
0.01
0.1
0.001 0.01 0.1 1 10
Sq u a r e W a v e Pu l se D u r a t i o n ( s)
thJ-hs
St e a d y St a t e V a l u e
R = 0.09 K/ W
(Single Side Cooled)
R = 0.04 K/ W
(Double Side Cooled)
(DC Operation)
thJ-hs
thJ-hs
ST3 3 0 C . . C Se r i e s
Transient Thermal Impedanc e Z (K/ W)
www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 94407
6Revision: 11-Aug-08
ST330CPbF Series
Vishay High Power Products Phase Control Thyristors
(Hockey PUK Version), 720 A
Fig. 11 - Gate Characteristics
ORDERING INFORMATION TABLE
0.1
1
10
100
0.001 0.01 0.1 1 10 100
VGD
IGD
(b)
(a)
Tj = 2 5 ° C
Tj = 12 5 ° C
Tj = - 4 0 ° C
(2) (3)
Instantaneous Gate Current (A)
In st a n t a n e o us G a t e V o lt a g e ( V )
a) Recommended load line for
b) Recommended load line for
<=30% rated di/dt : 10V, 10ohms
Frequency Limited by PG(AV)
rated di/dt : 20V, 10ohms ; tr<=1 µs
tr<=1 µs
(1)
(1) PGM = 10W, tp = 4 ms
(2) PGM = 20W, tp = 2 ms
(3) PGM = 40W, tp = 1 ms
(4) PGM = 60W, tp = 0.66 m s
Rectangular gate pulse
D e v i c e : ST3 3 0 C . . C Se r i e s
(4)
1
- Thyristor
2
- Essential part number
3
- 0 = Converter grade
4
- C = Ceramic PUK
5
- Voltage code x 100 = V
RRM
(see Voltage Ratings table)
6
- C = PUK case TO-200AB (E-PUK)
7
- 0 = Eyelet terminals (gate and auxiliary cathode unsoldered leads)
1 = Fast-on terminals (gate and auxiliary cathode unsoldered leads)
2 = Eyelet terminals (gate and auxiliary cathode soldered leads)
9
- Lead (Pb)-free
8
- Critical dV/dt: None = 500 V/µs (standard selection)
L = 1000 V/µs (special selection)
3 = Fast-on terminals (gate and auxiliary cathode soldered leads)
Device code
51 324
6789
ST 33 0 C 16 C 1 - PbF
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95075
Document Number: 95075 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 01-Aug-07 1
TO-200AB (E-PUK)
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in millimeters (inches)
4.75 (0.19)
28 (1.10)
6.5 (0.26)
0.3 (0.01) MIN.
0.3 (0.01) MIN.
25.3 (0.99)
DIA. MAX.
14.1/15.1
(0.56/0.59)
25° ± 5°
25.3 (0.99)
DIA. MAX.
40.5 (1.59) DIA. MAX.
42 (1.65) MAX.
Anode to gate
Creepage distance: 11.18 (0.44) minimum
Strike distance: 7.62 (0.30) minimum
Quote between upper and lower pole pieces has to be considered after
application of mounting force (see thermal and mechanical specification)
Gate terminal for
1.47 (0.06) DIA.
pin receptacle
2 holes 3.56 (0.14) x 1.83 (0.07) minimum deep
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
ST330C12L0L ST330C16L0L ST330C16L1L ST330C12C0L ST330C12C1L ST330C14C0L ST330C14C1L
ST330C16C0L ST330C16C1L VS-ST330C08C0 VS-ST330C12C0 VS-ST330C12L0 VS-ST330C14C0 VS-
ST330C16C0 VS-ST330C14L1 VS-ST330C16L0 VS-ST330C04C0 VS-ST330C14L0 VS-ST330C08L0 VS-
ST330C04L1 VS-ST330C14C1 VS-ST330C16C1 VS-ST330C04C1 VS-ST330C04L0 VS-ST330C08C1 VS-
ST330C08L1 VS-ST330C12L1 VS-ST330C16L1 VS-ST330C12C1 VS-ST330C16C3