2.2x1.4mm SURFACE MOUNT LED LAMP AA2214VR4D1S SERIES ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 2.2mm x 1.4mm, 1.3mm high. The source color devices are made with InGaN Light Emit- z Low power consumption. ting Diode. z Available on tape and reel. Static electricity and surge damage the LEDS. z Package : 2000pcs / reel. It is recommended to use a wrist band or anti-electrostatic z Moisture sensitivity level : level 3. glove when handling the LEDs. z RoHS compliant. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 1 OF 7 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 2 OF 7 Selection Guide Erp Part No. Dice Iv (mcd) [2] @ 20mA CCT Range Lens Type Viewing Angle [1] Min. Typ. Max. Min. Typ. 21/2 1201005923 AA2214VR4D1S-C1 Cool White WATER CLEAR 5310K 6000K 7040K 900 1300 120 1201005921 AA2214VR4D1S-N1 Neutral White WATER CLEAR 3710K 4000K 4260K 650 1200 120 1201005922 AA2214VR4D1S-W2 Warm White WATER CLEAR 2870K 3000K 3220K 650 1100 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Typ. Max. Units Test Conditions VF [1] Forward Voltage 3.3 4.0 V IF=20mA IR Reverse Current 10 uA VR = 5V C Capacitance pF VF=0V;f=1MHz 100 Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Cool White / Neutral White / Warm White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 3 OF 7 SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 4 OF 7 CCT 2500-7000 K Bin Code 0.44 3000 K 2500 K 4000 K 0.42 7 9 0.40 17 y 6000 K 19 21 7000 K 0.34 25 27 0.32 28 0.30 0.28 0.30 16 18 20 23 12 14 1 2 4 6 8 10 15 0.38 0.36 11 13 5000 K 3 5 W1 W2 W3 N1 22 N2 24 26 C1 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 x Color Group Chromaticity Regions Warm White Neutral White Cool White 1 2 3 4 5 6 7 W1 W2 W3 N1 N2 C1 1, 2, 3, 4 5, 6, 7, 8 9, 10, 11, 12 13, 14, 15, 16 17, 18, 19, 20, 21, 22 23, 24, 25, 26, 27, 28 Min. 2580 2870 3220 3710 4260 5310 CCT (K) Typ. 2700 3000 3500 4000 4700 6000 Max. 2870 3220 3710 4260 5310 7040 Notes: Shipment may contain more than one chromaticity regions.Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is 0.01. x y x y x y x y 0.4582 0.4687 0.4813 0.4099 0.4289 0.4319 0.4147 0.4221 0.4342 0.3814 0.3984 0.4028 0.3702 0.3736 0.3869 0.3722 0.3874 0.3958 0.3481 0.3370 0.3364 0.3557 0.3472 0.3328 0.4700 0.4126 0.4259 0.3853 0.3825 0.3798 0.3466 0.3411 0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3376 0.3616 0.4582 0.4099 0.4146 0.4089 0.3702 0.3722 0.3260 0.3512 0.4700 0.4593 0.4126 0.3944 0.4299 0.4221 0.4165 0.3984 0.3825 0.3783 0.3798 0.3646 0.3265 0.3370 0.3371 0.3472 0.4465 0.4071 0.4017 0.3751 0.3736 0.3874 0.3370 0.3472 0.4562 0.4687 0.4582 0.4260 0.4289 0.4099 0.4080 0.4221 0.4147 0.3916 0.3984 0.3814 0.3616 0.3592 0.3703 0.3788 0.3641 0.3726 0.3265 0.3270 0.3364 0.3371 0.3230 0.3328 0.4373 0.3893 0.3941 0.3848 0.3703 0.3726 0.3260 0.3512 0.4465 0.4071 0.3996 0.4015 0.3592 0.3641 0.3144 0.3408 0.4582 0.4099 0.4146 0.4089 0.3568 0.3495 0.3160 0.3274 0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3265 0.3371 0.4342 0.4028 0.3889 0.3690 0.3616 0.3788 0.3265 0.3371 0.4430 0.4212 0.3941 0.3848 0.3496 0.3702 0.3160 0.3274 0.4562 0.4260 0.4080 0.3916 0.3481 0.3557 0.3175 0.3139 0.4465 0.4071 0.4017 0.3751 0.3592 0.3641 0.3270 0.3230 0.4259 0.3853 0.3825 0.3798 0.3592 0.3641 0.3144 0.3408 0.4342 0.4028 0.3869 0.3958 0.3481 0.3557 0.3028 0.3304 0.4465 0.4071 0.4006 0.4044 0.3466 0.3411 0.3055 0.3177 0.4373 0.3893 0.3950 0.3875 0.3568 0.3495 0.3160 0.3274 0.4221 0.3984 0.3783 0.3646 0.3496 0.3702 0.3160 0.3274 0.4299 0.4165 0.3825 0.3798 0.3376 0.3616 0.3055 0.3177 0.4430 0.4212 0.3950 0.3875 0.3370 0.3472 0.3081 0.3049 0.4342 0.4028 0.3898 0.3716 0.3481 0.3557 0.3175 0.3139 8 9 10 11 12 13 14 15 16 17 18 19 20 21 SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou 22 23 24 25 26 27 28 PAGE: 5 OF 7 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 6 OF 7 PACKING & LABEL SPECIFICATIONS AA2214VR4D1S SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou SERIES PAGE: 7 OF 7