AA2214VR4D1S-W2 - Kingbright Corporation

SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 PAGE: 1 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou

2.2x1.4mm SURFACE MOUNT LED LAMP

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

AA2214VR4D1S SERIES

Features

z2.2mm x 1.4mm, 1.3mm high.

zLow power consumption.

zAvailable on tape and reel.

zPackage : 2000pcs / reel.

zMoisture sensitivity level : level 3.

zRoHS compliant.

Description

The source color devices are made with InGaN Light Emit-

ting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.008") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 PAGE: 2 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might leads to damage and premature failure of the LED.

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or

damage the internal circuitry.

4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter

of the nozzle should be as large as possible.

5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.

6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup

and avoid damage during production.

SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 PAGE: 3 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou

Selection Guide

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

Part No. Dice Lens Type

Iv (mcd) [2]

@ 20mA

V

iewing

Angle [1]

Min. Typ. Max. Min. Typ. 2θ1/2

AA2214VR4D1S-C1 Cool White WATER CLEAR 5310K 6000K 7040K 900 1300 120°

AA2214VR4D1S-N1 Neutral White WATER CLEAR 3710K 4000K 4260K 650 1200 120°

AA2214VR4D1S-W2 Warm White WATER CLEAR 2870K 3000K 3220K 650 1100 120°

CCT Range

Erp

1201005923

1201005921

1201005922

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Symbol Parameter Typ. Max. Units Test Conditions

VF [1] Forward Voltage 3.3 4.0 V IF=20mA

IR Reverse Current 10 uA VR = 5V

C Capacitance 100 pF VF=0V;f=1MHz

Note:

1. Forward Voltage: +/-0.1V.

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Parameter Cool White / Neutral White / Warm White Units

Power dissipation 120 mW

DC Forward Current 30 mA

Peak Forward Current [1] 100 mA

Reverse Voltage 5 V

Operating Temperature -40°C To +85°C

Storage Temperature -40°C To +85°C

SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 PAGE: 4 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou

SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 PAGE: 5 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou

0.30

0.32

0.34

0.36

0.38

0.40

0.42

0.44

0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50

x

y

2500 K3000 K

4000 K

5000 K

6000 K

7000 K

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

W1

W2

W3

N1

N2

C1

x y x y x y x y

1

0.4582 0.4099

8

0.4147 0.3814

15

0.3702 0.3722 0.3481 0.3557

0.4687 0.4289 0.4221 0.3984 0.3736 0.3874 0.3370 0.3472

0.4813 0.4319 0.4342 0.4028 0.3869 0.3958 0.3364 0.3328

0.4700 0.4126 0.4259 0.3853 0.3825 0.3798 0.3466 0.3411

2

0.4483 0.3919

9

0.4080 0.3916

16

0.3670 0.3578

23

0.3376 0.3616

0.4582 0.4099 0.4146 0.4089 0.3702 0.3722 0.3260 0.3512

0.4700 0.4126 0.4299 0.4165 0.3825 0.3798 0.3265 0.3371

0.4593 0.3944 0.4221 0.3984 0.3783 0.3646 0.3370 0.3472

3

0.4465 0.4071

10

0.4017 0.3751

17

0.3736 0.3874

24

0.3370 0.3472

0.4562 0.4260 0.4080 0.3916 0.3616 0.3788 0.3265 0.3371

0.4687 0.4289 0.4221 0.3984 0.3592 0.3641 0.3270 0.3230

0.4582 0.4099 0.4147 0.3814 0.3703 0.3726 0.3364 0.3328

4

0.4373 0.3893

11

0.3941 0.3848

18

0.3703 0.3726

25

0.3260 0.3512

0.4465 0.4071 0.3996 0.4015 0.3592 0.3641 0.3144 0.3408

0.4582 0.4099 0.4146 0.4089 0.3568 0.3495 0.3160 0.3274

0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3265 0.3371

5

0.4342 0.4028

12

0.3889 0.3690

19

0.3616 0.3788

26

0.3265 0.3371

0.4430 0.4212 0.3941 0.3848 0.3496 0.3702 0.3160 0.3274

0.4562 0.4260 0.4080 0.3916 0.3481 0.3557 0.3175 0.3139

0.4465 0.4071 0.4017 0.3751 0.3592 0.3641 0.3270 0.3230

6

0.4259 0.3853

13

0.3825 0.3798

20

0.3592 0.3641

27

0.3144 0.3408

0.4342 0.4028 0.3869 0.3958 0.3481 0.3557 0.3028 0.3304

0.4465 0.4071 0.4006 0.4044 0.3466 0.3411 0.3055 0.3177

0.4373 0.3893 0.3950 0.3875 0.3568 0.3495 0.3160 0.3274

7

0.4221 0.3984

14

0.3783 0.3646

21

0.3496 0.3702

28

0.3160 0.3274

0.4299 0.4165 0.3825 0.3798 0.3376 0.3616 0.3055 0.3177

0.4430 0.4212 0.3950 0.3875 0.3370 0.3472 0.3081 0.3049

0.4342 0.4028 0.3898 0.3716 0.3481 0.3557 0.3175 0.3139

22

CCT 2500-7000 K Bin Code

Color Group Chromaticity Regions CCT (K)

Min. Typ. Max.

Warm White W1 1, 2, 3, 4 2580 2700 2870

W2 5, 6, 7, 8 2870 3000 3220

W3 9, 10, 11, 12 3220 3500 3710

N1 13, 14, 15, 16 3710 4000 4260

N2 17, 18, 19, 20, 21, 22 4260 4700 5310

Cool White C1 23, 24, 25, 26, 27, 28 5310 6000 7040

Neutral White

Notes:

Shipment may contain more than one chromaticity

regions.Orders for single chromaticity region are

generally not accepted.

Measurement tolerance of the chromaticity

coordinates is ±0.01.

SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 PAGE: 6 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou

Reflow soldering is recommended and the soldering profile is shown below.

Other soldering methods are not recommended as they might cause damage to the product.

Recommended Soldering Pattern

(Units : mm; Tolerance: ± 0.1)

Tape Dimensions

(Units : mm)

Reel Dimension

SPEC NO: DSAK2997 REV NO: V.1 DATE: DEC/29/2009 PAGE: 7 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou

PACKING & LABEL SPECIFICATIONS AA2214VR4D1S SERIES