PDS360 Green 3A SCHOTTKY BARRIER RECTIFIER (R) POWERDI Features Mechanical Data Guard-Ring Die Construction for Transient Protection Low Power Loss, High Efficiency Low Reverse Leakage Current For Use in High-Frequency Inverters, Free Wheeling, and Polarity Protection Applications High, Forward-Surge Current Capability Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability (R) Case: POWERDI 5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Annealed over Copper Leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.093 grams (Approximate) POWERDI(R)5 Bottom View Top View Ordering Information (Note 4) Part Number PDS360-13 Notes: Case POWERDI(R)5 Packaging 5,000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com. Marking Information S360 YYW W K S360 = Product Type Marking Code = Manufacturers' Code Marking YYWW = Date Code Marking YY = Last two Digits of Year (ex: 15 for 2015) WW = Week Code (01 - 53) K = Factory Designator POWERDI is a registered trademark of Diodes Incorporated. PDS360 Document number: DS30479 Rev. 12 - 2 1 of 5 www.diodes.com June 2015 (c) Diodes Incorporated PDS360 Maximum Ratings (@TA = +25C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load Symbol VRRM VRWM VR VR(RMS) IO Value Unit 60 V 42 3 V A IFSM 100 A Thermal Characteristics Characteristic Thermal Resistance Junction to Soldering Point Symbol RJS RJA RJA RJA TJ, TSTG Thermal Resistance Junction to Ambient Air (Note 5) TA = +25C Thermal Resistance Junction to Ambient Air (Note 6) TA = +25C Thermal Resistance Junction to Ambient Air (Note 7) TA = +25C Operating and Storage Temperature Range Typ 95 70 50 Max 3.0 Unit C/W C/W C/W C/W C -65 to +150 Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Reverse Breakdown Voltage (Note 8) Symbol V(BR)R Forward Voltage VF Reverse Leakage Current (Note 8) IR Notes: Min 60 Typ 0.57 0.53 0.51 0.70 0.62 0.60 3 1.5 Max 0.62 0.60 0.57 0.76 0.70 0.66 150 10 15 Unit V V A mA mA Test Condition IR = 0.2mA IF = 3A, TJ = +25C IF = 3A, TJ = +100C IF = 3A, TJ = +125C IF = 6A, TJ = +25C IF = 6A, TJ = +100C IF = 6A, TJ = +125C TJ = +25C, VR = 60V TJ = +100C, VR = 60V TJ = +125C, VR = 60V 5. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com. 6. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com. 7. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4 mm x 7.4 mm. Anode pad dimensions 2.7 mm x 1.6 mm. 8. Short duration pulse test used to minimize self-heating effect. POWERDI is a registered trademark of Diodes Incorporated. PDS360 Document number: DS30479 Rev. 12 - 2 2 of 5 www.diodes.com June 2015 (c) Diodes Incorporated PDS360 3 2 1 0 6 7 2 4 5 3 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation 0 1 10m 100 10 1 0.1 0.01 0.001 0.0001 0.00001 0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1,000 1m CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) PD, POWER DISSIPATION (W) 4 100n 10n 100 1n 10 100 0 20 5 15 30 10 25 V R, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 200 TA, DERATED AMBIENT TEMPERATURE (C) 4 IF(AV), AVERAGE FORWARD CURRENT (A) 0 10 20 30 40 50 60 V R, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 3.5 3 2.5 2 1.5 1 0.5 0 0 160 120 75 100 150 25 50 125 TA, AMBIENT TEMPERATURE (C) Fig. 5 Forward Current Derating Curve 80 40 0 0 15 45 30 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 60 POWERDI is a registered trademark of Diodes Incorporated. PDS360 Document number: DS30479 Rev. 12 - 2 3 of 5 www.diodes.com June 2015 (c) Diodes Incorporated PDS360 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. E1 A1 E1/2 e 1 (R) 10 b2 D 2X b1 E/2 A A2 1 5 E 10 1 5 1 E2 L1 L1 W D2 POWERDI 5 Dim Min Max Typ A 1.05 1.15 1.10 A1 0.00 0.05 A2 0.33 0.43 0.381 b1 0.80 0.99 0.89 b2 1.70 1.88 1.78 D 3.90 4.05 3.966 D2 3.054 E 6.40 6.60 6.504 e 1.84 E1 5.30 5.45 5.37 E2 3.549 L 0.75 0.95 0.85 L1 0.50 0.65 0.57 W 1.10 1.41 1.255 All Dimensions in mm L L Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 Dimensions C G X X1 Y Y1 Y1 G Value (in mm) 1.840 0.852 1.390 3.360 1.400 4.860 Y X C POWERDI is a registered trademark of Diodes Incorporated. PDS360 Document number: DS30479 Rev. 12 - 2 4 of 5 www.diodes.com June 2015 (c) Diodes Incorporated PDS360 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2015, Diodes Incorporated www.diodes.com POWERDI is a registered trademark of Diodes Incorporated. PDS360 Document number: DS30479 Rev. 12 - 2 5 of 5 www.diodes.com June 2015 (c) Diodes Incorporated